Demosaicing intro'd w / LR3.2 sharpening with 7 d. Assistance requested.

Similar Questions

• Replacement of simulate signal VI with the DAQ assistant

  Hello

  I have a VI fucntioning, where signal comes 2 simulate VI signals and is being recorded.

  I replaced that with the DAQ assistant. I want to know if the wiring is correct and if it will give me the same result as the simulated VI.

  Thank you.

  Hello Andy,

  Thanks for the reply, yes I did that as well, another way to do it is the 'split signal VI' that automatically separates the signal into 2 channels, most of the high sons being Ch 0

  S

• 4320 proBook s - problems with the wireless Assistant

  Hello

  I have my ProBook s 4320 for about half a year now. For most of the year the half I had problems with the wireless assistant - it seems that when I start my laptop it takes about 5 to 10 minutes before the work of the internet. I never changed any settings in the wireless assistant.

  Nobody does face these same questions and no one knows how the internet starts immediately when I start my laptop? I tried this on different places with different wireless modems, but everywhere, it's the same thing and books of other people can use internet immediately.

  Thanks in advance

  Hello

  You are welcome to help

  The fact that it connects properly in Mode safe indicates that the driver who normally starts with Windows or a program is causing the problem - most likely candidate is to begin by F-Secure.

  Before attempting the following procedure, make sure that you have an installation of F-Secure program, so you can re - install this software, and also a license key necessary to activate it.

  Then, from the windows control panel. Open programs and features, click on the entry for F-Secure once to highlight, and then click the option to uninstall at the top of the window.  Once done, restart the laptop.

  Again, when windows restarts, check the internet connection by using only a known secure site.

  Let me know how this affects the problem.

  Kind regards

  DP - K

• I tried to update my Lightroom CC to get the menu effects and fog. Once I did nothing worked! No Lightroom or Photoshop I chatted with adobe online assistance and she finally got both working again but had to wipe everything and reinstall.

  I tried to update my Lightroom CC to get the menu effects and fog. Once I did nothing worked! No Lightroom or Photoshop I chatted with adobe online assistance and she finally got both working again but had to wipe everything and reinstall.  Now I sometimes have a 'demo' of Photoshop and the same version of Lightroom CC without de-haze. In addition, I can't use these programs in offline mode - I have to keep signed in Creative cloud - I don't have this problem before.  Any ideas before once more involved with a cat onlaine?  Thank you...

  Raeburn, if you get the trial version, make sure that you are connected to creative cloud. Here's what you can try.

  • Sign in to creative cloud.
  • Disconnect from the Internet.
  • Try to use Lightroom and check if you get a trial version.

  Note: Please make sure that you are not disconnected from the creative clouds.

  You can check: why I am forced to connect to CC, when I bought a stand-alone license for Lightroom 6?

• Instal LR3.2 RC with LR 3.0?

  All the

  Just checking I'm not crazy, but I installed the RC to display, and it has replaced all 3.0, I have than 3.2 according to the 'about us '...

  This is the correct behavior, or I mess up by not choosing a different location or it is intended to replace?

  I had a tidy up and noticed from 2.7 to 3 I found pieces of 2.4 and 2.6 in the LR folder as well so I'm not sure what the intention is to update all...

  Not that I have no problem its all working fine... (for me)

  Thanks in advance

  Simon

  On the PC, the RC installation normally removes the previous version. Some things may be trolling, but the main application is deleted. On the Mac, the RC install leaves the original in place.

• Problem with HP Support Assistant

  When I open HP Support Assistant (in response to the message) it loads OK and when I press NEXT on the Welcome screen I get the homepage with a choice of 8 plates to the choice. Tile "updates and the updates" indicates that it is 'Important Update available' and when I click on the tile that will display the page 'updates & tune-up' with a total of 5 important updates selected for download.  However, that's all - none of the other links on this page responds to a click of the mouse and the button "Download & install" appears to be grey and has no reaction when clicked.

  I also get a message from my Norton security that there "by HP heavy CPU usage.

  Can someone out there please help?

  Longframbri

  Lets start with you help us by identifying your laptop completely.
  
  HP has made and sold more than a thousand different models of laptops and desktops over the years. It is difficult to help you if we don't know which specific model you own...
  
  Method #1: If the laptop boots into Windows, you can retrieve your product number by pressing Fn + ESC key.
  
  Method #2:
  Remove the battery and look in the compartment where the battery was installed. You should see a Service number with the printed part number and product name. Thanks for posting the p/n (with all alphanumeric characters) here. If you live outside of North America, it helps us if you post the country of purchase.  Also post the CPU type and prepare operating system installed. (AMD or Intel). P/n in the following image is the number of the product.
  
  
  
  Your description of the issue would seem to indicate that an uninstall of the HP Support Assistant and the installation of the latest version would be a good starting point.

• Re: Qosmio G30-194 - problem with the Toshiba Assist tool

  Hello

  I recently downloaded and installed Assist tool on Windows xp installed costs. The problem is that it does ' t have the same characteristics
  as she had on the old Windows mce system. I think here to optimize the tool to control the work of the cpu (in the tab optimize).
  Help I have now has only the mouse, sd memory card and accessibility features... :/

  Can anyone help with this? See you soon.

  This certainly isn't problem Toshiba Assist. Problem is that you have not installed all other toshiba tools and utilities.
  Toshiba tool is small tool where you can find shortcuts to all other tools so when you install the missing tool, they will be shown here.
  Check it please what lack us and install it.

• Problem with responses to the request for the Skype name

  Hello. I'm pretty new to Skype. I couldn't remember my name from Skype, but I was able to connect with my msn address. I wanted to know my Skype name well. I followed the instructions to do so but the sent code has never worked. I tried several times and has failed each time. Someone on my Skype told me what my Skype name is and I tried to sign her, but she won't let me. She would not have taken if I click on the link or entered the code manually. I can access my account with my msn address, as I said. I wish I just had this problem solved with my Skype name, and I don't want to have to get an additional account. Can anyone help?

  If you created a Microsoft account using your [email protected]email address, then your Skype name is onlinexx. However, you cannot use that name as your login ID. The only option you have is to login with your account (email address).

• Need help with the Support Assistant for TouchSmart 310

  I tried to install the latest version of HP Support Assistant manually by searching on the HP customer service and it removed the previous version first. Nothing happened thereafter. I thought it would open HP Support Assistant after agreeing to terms and policies, but he did nothing. When I click on the HP Support Assistant icon, I get "year error occurred" on the very top of the page.  I am not in a position to make changes within the program - everything is gray.

  I tried unistalling tune but I get a message stating: Error 1316 - a network error has occurred trying to read from the file c:\windows\installer\hp support assistant.msi. I tried to look for this file and have not found. I even typed in the search and was not able to find it so I am not able to uninstall it.

  I've had this computer for a year now and have never been able to upgrade to the latest version of HP Support Assistant within the program. I'd get what your computer does not meet the minimum requirements and so I left it alone. The reason why I decided to manually update was because I have problems with the E: drive. And from what I read on HP, to see if I have a hard drive failed, I would need to run tests using HP Support Assistant, but unfortunately, I am not able to do this since I can't access HP Support Assistant.

  I have HP TouchSmart 310-1125f. Windows 7 64-bit.

  Hello

  It is good to hear than the detected "Fixit" and was able to remove the existing installation of HPSA such as what can many fixed some of the problems that can prevent a new version installation correctly.

  First, even if you always have the latest installer HPSA, download it again from the following link and save it in your downloads folder.

  HP Support Assistant.

  One when you're done, open your download folder, click with the right button on the Setup, select Extract 7 - zip, select the files and then click Ok.  Open the new folder sp58919 snippet and see you another installer called Setup - this right click and select new, 7-zip, select extract files and then click Ok.  Open the new installation folder, the installation application ( 4th down with a size of 249KO ) right-click and select "Run as Administrator" to launch the installation.

  Did the full install now and if so, HPSA does work properly?

  Kind regards

  DP - K

• Concerns about the workouts with the Apple Watch - request for comments and Suggestions

  I'm a professional skill that has recently upgraded from a Polar to the Apple Watch.  I am delighted to stop wearing the chest strap of the Polar, but even though I love my new watch, I wish for some improvements in the future.  Training categories are too vague.  When you set up a 'training' on my Apple Watch, which is the step class, I was ANOTHER selection to OPEN.  Others who do?  What others recommend?  And I'm trying to decide whether to use Active or Total calories during the recording of my activities in my Fitbit dashboard.  One last thing, I find it odd to be worked hard and look down to see my heart rate displayed as 60, when I know that it takes more than 130.  I would like to hear from other fitness in mind of people about my problems.  Thank you.

  Hello

  When a workout is started, choose the type of activity that best fits the nature of your exercise activity. For any activity other than the named options, select the other (for example, your step class).

  The types of activities in the application of the workout on Apple Watch help the watch to determine what sensors / data sources to use in follow-up and evaluate the results of your activity. For example:

  -To run in the open air, the watch can use the heart rate sensor, accelerometer integrated and GPS of the iPhone paired (if it is available during the race).

  -For inside running (on a treadmill), the watch will be based on the accelerometer to estimate the distance and pace (as GPS data are not relevant).

  -Indoor activities, the watch will be based mainly on the frequency heart readings to estimate of burning calories.

  The other category is therefore useful (from point of view of the watch) by advising that certain types of activities are not undertaken.

  During the follow-up of one exercise using the others, your watch will estimate active calories based on one that is the higher of:

  -L'equivalent of a brisk walk (calories saved on this basis can vary per person, based on their personal information), or;

  -The data recorded by the heart rate sensor.

  When you use the other, activity app will also credit the ring of progress of exercise with one minute for every minute of the workout.

  If you want Apple to consider adding specific types of additional activities for the purpose of the workout, you can suggest that here:

  https://www.Apple.com/feedback/watch.html

  All submissions are read (even if you do not expect to receive a response).

  More information:

  Use of the workout on your Apple Watch - Apple Support

• Office using Intel h8 - 1520t with special configuration problems with HP Support Assistant 8.1

  Several days ago the wizard help notified me that I had to do an update review. It was an update Broadcom Bluetooth of a certain type. He had numbers, a slash and more after him.  I installed it.  He went through all the steps of installation, but not the last step.  Now, I get an error whenever I start up the computer indicating that BTtray.exe does not load and btwapi.dll is not found.  Initially, I had Windows 8 and upgraded to 8.1 shortly after buying the computer. I have a wireless network adapter N Premium and Bluetooth (R) (2 x 2).  The only wireless thing I use my keyboard and mouse. I don't use Bluetooth, I bought the Bluetooth with my new computer for possible future use. I can't get rid of this message at startup.

  In addition, since HP Support Assistant made this mess, I decided to uninstall it. I can't uninstall it.  I tried to reinstall what can or was not perhaps not a newer version and settle, tried to uninstall and couldn't.  The Support Assistant comes with the computer of Windows 8. Now, I can not open HP Support Assistant.

  Now comes the Windows Update and it keeps me providing a lot of optional software. I'm now trying all that they offer.

  I fixed it without doing a system restore.  I went the SWSETUP and found the original SP, which has installed the HPSA. Since it has been uninstalled in part and partly not. I reinstalled the original who put the MSI available again.  Then, once that he the reinstalled, I used the uninstall found in the same ESP under SWSETUP and removed.  It took everything with it that you had to go and I have no more problems. In addition, I had found HPSA running in the Manager of tasks and Services got deleted as they should have.  Bad installing Bluetooth which began the questions was related to the services that are running.  Because I'm not using Bluetooth, I roamed my computer and stop all the Bluetooth Services running.  I have all service packs, has not deleted because they are not hurt anything sitting there. I have no error message.  I was getting a network message and I do not use a network on my PC and I was getting the error MSI just try to uninstall HPSA.  The MSI error would leap upward when you try to uninstall using the control panel and it is because Windows could do not seem to find this program in the MS file.  The wrong program installed I think was linked to Widcomm, probably a program of Broadcom Bluetooth.   Windows tried to use 13c4ce.msi from the windows file to uninstall through Control Panel.  It does not work. The following issues have been resolved for btwapi.dll, BTTray.exe, 1316 network error and MSI error.  HPSA does not work in Windows 8.1 Pro 64 bit.  Updates are not correct and I think that it is better to get updates.  Even the online hp scan does not work. Find your computer and peripherals, it fails to find updates for you.   I have my hp printer works very well and set up properly and he always tells me that I need an update that I have.  HPSA would be great if it worked. Interesting that somehow Windows Update picked up that my computer had been messed up and showed two updates that were made some time it y a. I reinstalled and no problem from that. Thank you. I learn to my new hp!

• Problems with HP Support Assistant

  I accidentally uninstalled HP Support Assistant. So I downloaded the Setup program for the program, but the software does not work properly. The problem is that it appears more Assistant support icon in the taskbar. In addition, when the software is opened is displayed for a few seconds a black window with a few things written on the inside. I used the installation program is the following: http://ftp.hp.com/pub/softpaq/sp62001-62500/sp62291.exe

  Here are my computer details

  HP ENVY 15 Notebook PC

  Serial number: [under the direction of personal information]

  OS: Windows 8.1 64bits

  I hope someone can find a solution to this problem!

  Hi RedFrame,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP ENVY 15 laptop and have the HP Support Assistant, problems or errors. Here is a link to uninstall the HP Support Assistant software. You can reinstall it here.

  I hope this helps.

  Thank you.

• Make an adjustment in line with the Vision Assistant for a polynomial function?

  Hello

  I have the following problem: I have a laser beam which a (non-linear) line on a wall. For this line, I need to know (exactly) mathematical

  function. That's why I can get a picture of the line, but I don't know how I can extract the mathematical function with a line fit for example. If I could "convert."

  the line at points that I would use the line fit function to LabView that should work without problem.

  Is there a way to solve the problem with vision assistant or... ?

  Thanks in advance

  Hello

  after thresholding, this should work:

  

  False case just by...

  Best regards

  K

• New Daq with the Daq Assistant in the filtering code

  Hei,

  I have a NI USB-6225 DaqMx I used a couple of years. When I started with LabVIEW, I found the Daq Assistant to the best way to measure the voltage with my Daq etc. My company has purchased another DaqMx NI USB-6225 and now I have a big problem: the Daq Assistant in my old Vi does not work with the new data acquisition. I understand why there is this problem, but I do not know how to solve. I found this code on the forum who finds that Daq is connected:

  

  The problem is that Daq Assistant do not have an entry for it, and it gives me an error if I try to run the code with a different device than the original, I used when I created the code.

  

  Is there a way to solve this, so I don't have to convert all the Assistants Daq normal code?

  Hello again,

  two options:

  (1) as the old software is related to 'Dev1' you must rename your new device to this alias and skip/rename the old device (and lack).

  (2) rewrite your old software does not become is not dependent on the name of the alias for the data acquisition card...

  It's your choice!

• Calendar and the problems of data collection with the DAQ Assistant

  Hello NOR Developer area,

  I am a Novice of LabVIEW and have seen how helpful you all can be, and if I come to ask for your help.

  I'm having some trouble with a VI I built that specifies an input voltage, a SCB - 100 connected to a PCI-6031E and converts this tension in a temperature displayed on a waveform table. The goal is to give a constant reading of the temperature and display it in a chart for as long that the VI is running (and to reset the chart the next time the tracks of VI).

  The problems I've encountered currently are:

  -After a few minutes of the VI running, I get an error message 200279: tried to read samples that are no longer available. The requested sample was already available, but has since been replaced. (to the DAQ Assistant express VI).

  -I don't know how to change my chart so that the minimum value X is both during which the VI was launched and have the maximum X value increases with each iteration of the loop. Currently, I have the VI get the time system and contributing to the property node X scale. This worked for the graph of the voltage, but not for the temperature chart

  I appreciate those of you who took the time to read my post.

  Thank you all for your help.

  Sincerely,

  Ethan A. Klein

  SB candidate in Chemistry & Physics

  Massachusetts Institute of Technology

  Class of 2015

  PS I enclose my VI to give you a better understanding of my current situation.

  E A Klein wrote:

  Thanks for writing.

  What property node is talking?
  I do not understand that many different data types. How can I go on the treatment of all the data?

  (Did you mean I should wire 'blue' data for mathematical functions rather than using the node property tension?)

  Sincerely,

  In fact, one of the nodes property.  I mean specifically the tension property node.  But in reviewing, I noticed the other nodes in property for the chart.  Just set auto-scaling to the X scale and that should take care of two of the nodes property (right click on the graph, X scale-> AutoScale X Scale).  I also recommend placing your mathematical functions in a Subvi to make things easier to read.  Attached, that's what I think you're after.

  I hope that these small tweaks will speed things up enough to avoid your error.  If this isn't the case, then we should begin to look at the design of producer/consumer model or take readings at the same time.  It might also be worth looking away the DAQ Assistant and DAQmx real screws.  But one step at a time.