I stop in the middle of the update

Similar Questions

• Windows Update installs the same update everytime I stop. The update is successful but remains as an update. KB2633171.

  Original title: update continues installation KB2633171

  I Windowd Home Premium and windows update installs the same update everytime I stop.  The update is taken with success but remains as an update.  KB2633171 is the update

  Hi whales,

  I suggest that you check the troubleshooting provided in the link mentioned below steps to solve the problem with Windows Update offers repeated updates.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  Hope this helps

• doesn't stop after the update

  I've updated the software for my Mac mini yesterday (19/12/15). When updates have been made, I stopped as usual - except that the gear on the screen remained there for at least 30 minutes. I had to unplug the mini to stop the process. Today, I started the camera and there worked - App Store showed that need updating, so I think that he had no problem with the installation yesterday.  But when I stopped, the engine remained once again on the screen for a long time. I finally had to unplug again. Any ideas what is wrong and how to fix it?

  Several parts of the update are not actually installed until the machine stops.  The installation process can take a long time, and Apple install progress estimates are notoriously inaccurate (the "About 2 minutes to the end" on my El Capitan upgrade took more than 6 hours!) »).  I say stop the machine before you go to bed and see if it ends in the morning.

  If this is not the case, try resetting the PRAM (NVRAM) memory when you start.   Probably a good idea to do whenever you make an upgrade of the OS.  The El Capitan upgrade on one of my machines was starting slow until I reset the PRAM.

• Satellite C660 Wireless stopped since the update of the BIOS 1.4

  In fact, there is a thread on this same topic closed. But I would like to add something.

  My Satellite C660 is dual-boot. I have Ubuntu installed as well as Windows 7. Now, at the moment that I stupidly updated the bios to 1.4 the wireless doesn't work under windows. But he continued to work under Ubuntu.

  So, I know that the material has not broken suddenly. It is clearly a serious error in the bios update provided by Toshiba and must be fixed immediately.

  One kind may explain how to restore the previous bios. I know it was recorded somewhere because I saw what happens during the update process.

  See you soon!

  > Now, at the moment that I stupidly updated the bios to 1.4 the wireless doesn't work under windows. But he continued to work under Ubuntu.

  Have you checked if the WiFi is enabled in Windows 7?
  Usually you must activate the Wlan using Fn + F8 keys.

  Check it!

• Vista will not be stopped during the update of Windows (see details)

  Reference Dell XPS420, 4 MB of RAM, two 1 GB WD HD, Windows Vista Home Premium, updated with all updates important to Microsoft.

  When I tried to install the latest updates (24 November 2009) using update installs and closes down your Vista computer got as far as "Shutting Down", but does not yet - icon turns on the screen of teal'c circle (or whatever color that is) and there are some HD activity , but that's all. Vista (and the PC itself) was working fine up until this point.

  Hi Casey785,

  Welcome to the Microsoft answers site.

  Step 1: Run (Checksur.exe) system update readiness tool

  Download and run (Checksur.exe) system update readiness tool. After downloading this tool, it runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  For more information about how to download and run the system update readiness tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821 Description of the system update tool for Windows Vista and Windows Server 2008: http://support.microsoft.com/kb/947821

  Article 947821, scroll down to the "Microsoft Download Center" section and then click on the link to download the update for your operating system preparation tool

  Step 2: Reset the Windows Update components

  You will need to maybe reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link:

  How to reset the Windows Update components? : http://support.microsoft.com/kb/971058

  These steps should solve the problem, give it a try and check if you are able to perform windows updates.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer starts in safe mode and stops during the update of the photo shop.

  don't know what to do. Lightroom update fine, but photoshop 2015 keeps making the closed computer

  Hi Perston, what version of operating system do you use? You use creative cloud app to update Adobe Photoshop CC 2015?

  Please try to remove creative cloud app, then reinstall it and launch the update.

  1. remove the cloud creative app.

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  2. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  Try the direct link: http://prodesigntools.com/adobe-cc-2014-direct-download-links.html

  I hope this helps.

• App stopped during the update

  I have an app on my IPad 2 (running IOS 9.2) which started to update automatically, then enemy stopped for any reason.  Now the app icon is gray with an 'X' through it.  The application does not open and if I press the application, it does not generate the small 'X' to delete, but it doesn't matter, app will not remove.

  If I go to the App Store and review the Apps on my device, it shows, but neither the icon to download or open is present.

  Can someone help with this problem?

  Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.

• brushes Photoshop rows and stops after the update to Yosemite

  After update to Yosemite, whenever I use the brush or tool Eraser, it stops or lags (I don't know what to call it).

  What happens is I can't hit the other shortcuts like '[' keys to increase the size of the brush, and even changing tools like pressing 'V', but if I click the icon it will be recovered.

  I checked the history panel, it stops there.

  I use

  Wacom Bamboo CTH-670

  Wireless keyboard

  Wireless mouse

  iMac (21.5 inch, Mid2010)

  I also did these things

  -Reinstalled photoshop and Wacom driver

  -If I use the mouse it works very well

  -Because the mouse is OK, I thought this is my wacom but used the brush in Lightroom, it works perfectly it

  -Using the clone as a brush stamp tool, it works perfectly.

  What should I do now?

  Are you running CS6? If Yes, go to Menus, shortcuts, tool Lasso or Photoshop constantly run when using a Wacom tablet. Mac OS

  and install the plug-in white window workaround. Let us know if this clears up the question

• Windows Vista Home Prem x 86 has stopped doing the updates and update history disappeared C0000022 error code

  It happened about 10 days ago, and about 2 days ago popped up validation error w / error OxC0000022 code, can not find these codes anywhere. I have a black desktop. This computer was my daughters before she settled in the West, and I know that she had problems with the validation before I remember to tell him something about this, it was a bear, she had to get help from MS to help. But it is very difficult to get in touch with him and I don't want her to think that old dad don't know what hes doing. I installed the virus and malware and a few budget programs the wife play WOW on it but, despite this, it is working long hours. My daughter had updated Automatic, disabled, looks than year and a half she had it when I turned on updates it took several days to catch up.but which was about three months ago. Like I said that happened about 10 days before he gave not me all the problems of the six months that I got it. Any help would be appreciated.

  I installed [anti-virus and anti-malware application?]... My daughter had updated Automatic, off, looks like a year and a half...

  Naughty, naughty girl! See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Since the update, my photos are not automatically goes into Dropbox

  I'm used to be able to take a picture on my phone, and that she would go into Dropbox, so that I can access it on my PC. Who has stopped since the update and I need help to set so that it does! Thank you.

  @Annie888

  Any time, be sure to only put in WiFi, so your monthly data is not lost.

• Random system stops after the April 14 round updates of Windows

  SP3 for Windows XP MCE 2002 (or 2005 depending on where you look) running on the model of HP Media Center PC m7357c with 3.5 GB of RAM and improved 2.8 GHz Pentium D 3.0 GHz Pentium D two years ago. Regularly cleaned system (to maximize life fan cooling ;-).)

  System as worked very well for years. After April 14, 2012 updates including

  KB2675157 update Cumulative security for IE 8 for Windows

  KB2656378 a security update for MS .NET Framework 1.0 SP3 on Windows XP Tablet PC and Media Center

  KB2656370 a security update for MS .NET Framework 1.1 SP1 on Windows XP, Windows VIsta and Windows Server 2008 x 86

  KB2656369 a security update for MS .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86

  KB890830 Windows tool for removing malicious software - April 2012

  KB2653956 for Windows XP security update

  Since updates, get the system of random start for something called ftsata2 errors:

  The next (s) starting or starting system could not load:

  ftsata2

  ... and the DCOM event like this errors:

  [dozens of times, reboots?] -DCOM got error "the service cannot be started, either because it is disabled or because it has no enabled devices associated with" try to start the service of MDM with arguments "" to start the server:

  {0C0A3666-30C9-11D0-8F20-00805F2CD064}

  [once] - the server {7F6316B4-4D69-4765-B0A3-B2598F2FA80A} is not registered with DCOM within the required time.

  [once] - unable to start a DCOM Server: {0228576F-6E6C-4E1A-B175-0E46A316AFE2}. The error:

  "Access denied."

  Happened at the start of this command:

  C:\windows\ehome\ehmsas.exe-integration

  [time] - TCP/IP has reached the security limit imposed on the number of simultaneous TCP connect attempts.

  "[once] - the system restore filter encountered the unexpected error ' 0xC000007F ' while processing the file 'ARestore.exe' on the volume 'HarddiskVolume3 '. He stopped monitoring the volume.

  [tonight for the first time] - DCOM got error "the service cannot be started, either because it is disabled or because it has no enabled devices associated with" try to start the service ntmssvc with arguments "-Service" to start the server:

  {D61A27C6-8F53-11D0-BFA0-00A024151983}

  Around the same time, the system began to experience 'stops' for lack of better. We'll be reinforcement along as usual... and the system fan will be instantly and the mouse (and computer, et al.) stops at halfway or middle-click! The hard disk activity stopped responding. Any transition happening on the screen stops middle of transition. The shift and caps lock numlock keys on wireless keyboard stop working. Waiting for system to recover is futile (waited all night on two occasions). He died during a print job, the printer is wireless so she would probably go until everything has been has been printed before stopping.

  Have little time and resources to play games... but being unemployed also limits of capacity to replace the system (not to mention the displacement of thousands and thousands of data files and reinstall hundreds of installed programs).

  Just uninstall all of these updates safe?

  Thank you

  Jim

  Hi Jim,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums.

  Hope the helps of information.

• Computer stops after the installation of security update KB2393802

  I'm 'rebuild' an old computer Gateway E-4600, to give via a local social agency.

  OS is XP Home, and the product ID of the COA is valid.

  I'm writing this, I'm in the middle of the 3rd attempt to get all of the updates to install * without * preventing the closure of the computer.  Each facility has given me minor differences in available updates, but I was not sufficiently detailed records of what was suggested to be more precise in these differences.    I'll know better here on out!   Laughing out loud

  I didn't know that a problem existed in the judgment until I was almost done with the first reconstruction, which included the installation of the software.

  During the reconstructions of the second and third, I largely used the system restore to isolate any problem and found the following:

  KB 2393802 for Windows security update prevents the computer from closing with the closure of the XP Start Menu or Task Manager.  The only way I found to stop it is to hold the power button on or unplug the computer.  I don't actually unplug the unit, but that obviously has to work!   Laughing out loud

  More interesting still, the article refers to Intel and AMD graphics cards, and this computer has a graphics card from NVIDIA GeForce2 MX/MX 400 (via Belarc Advisor).

  I'm still trying to find an answer online, but nothing so far.

  I can't give this with this problem :-(

  I would like to know the answer to one or both of the following questions:

  1. Why Windows/Microsoft Update tells me to install an update for a graphics card that is not installed in the computer?
  2. How can I prevent Windows/Microsoft Update listing and want to install the update that is as a manual or automatic installation install?

  Thoughts and suggestions?

  Yes, I'm still 'watching' this thread.

  My answer 11 - Aug 31 is still standing.

  Hi, PA Bear.

  Hallelujah, it's fixed!    : grin:

  While working with the technical support of MS, I discovered by chance that the computer turns with KB2393802 installed if the computer is disconnected from the internet.   AKA, unplug the Ethernet cable from the computer.

  Finally, I started to wonder if the question can be hardware and not software.

  So I started picking at glitter and for me, it means generally try the easiest to accomplish the solution first.   Laughing out loud

  It was a replacement of the CMOS battery, but that didn't work.  I really didn't think he would, but hey, it was the best thing to do.

  I was going to swap hard drives, with a new installation of Home or Pro, but then I realized that it was still easier to swap the Ethernet card.

  I deleted the Linksys card (the latest version of the driver is already installed) system drew the card and dug an old map SMC EZENET of the pile of junk.  (Who doesn't have a lot of junk!   LOL) went scrounging for a driver online and got that installed, then used the device to update manager the driver, and the rest is history.

  I shut down the computer at least 10 times since (I kept a detailed log and when I hit 7 successful stops I stopped making new entries) and it worked fine every time.

  This could be something to the file in memory banks trivia!    Laughing out loud

  Thanks for the help and suggestions.

• Canon PIXMA MG5200 printer Scanner & stop in the middle of their work

  In recent weeks, my printer/scanner has developed erratic behavior. Examples: only 2 of the 3 pages are printed on only half a page. Scanning is impossible, the scanner stops in the middle of the scan or does not start even if it is the beginning of the usual sounds. I have re-installed the CD Canon, the updates of Windows are OK, I have a McAFee antivirus. When I run the diagnosis of Canon, it says that everything is OK. The problems in recent weeks and is getting worse. Windows today might not start at all, but after I ran beginning with repair and Restore Point. Any help would be appreciated.

  Hi James,

  We apologize for not be able to address your concerns in a timely.

  I suggest you to install the drivers in compatibility mode and check.

  See the steps to install a driver in compatibility mode:

  a. right click on the file to install the driver, and then select Properties.

  b. Select compatibility tab.

  c. check mark next to run this program in compatibility mode and select the operating system in the drop-down list.

  d. let the driver to install, and then check the functionality.

  If the problem persists, then try to uninstall and reinstall the printer once and check if it helps.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  Thank you.

• problem with downloading... stops in the middle...

  Hello... I'm trying to download components hyperion... from 'delivery.oracle.com '... IAM using the "DAP 9.1" as a download manager...
  The problem is he stops in the middle (due to the failure of the power supply failure)... and ask for the username and password...
  (opens popup window = authentication required, Site = ' oracle-updates - intl.oracle.com ". username, password)
  When I enterd my oracle username and password it won't take... really a bit confused...
  I don't know why it happens to me like that... some time he won't ask any username and password... He direcly resume the download... could you please let me know what to do... ?

  Hi Sri-Oracle,
  I am also facing problem of resume with all the oracle-Updates site to update downloads - intl.oracle.com.
  I downloaded the version wanted Getright, it'll work.
  Kind regards
  ROracle

• Mac stops do not after the update of the sierra

  I've updated my MacBook Air (13 inches early 2015) to Sierra. After the update, it is not shut down or restart. If I click on stop, my screen goes black and the keyboard backlight is on. The judgment never ends. Its the same case on reboot too.

  Help, please. Thank you.

  Although this will help, but I have also reported this problem, like many other people:

  MacBook Air shutdown correctly

  macOS Sierra presents a serious problem that must be dealt with quickly

  Apple should give a direct response to this because it is obviously not an isolated incident.