Deskjet 3070 wifi problem

Similar Questions

• DeskJet 3070 A - problem of cartridges

  This is a brand new. I put the cartridges in the printer and try to install, but the screen still shows "use cartridges setup." I don't know what to do...

  

  Hi ricky1978,

  If you bought the printer in Singapore and are know living in the Philippines, you will need to have the region has changed on the printer. Under information on how to get to the region are changed on this printer.

  If you bought the printer in an area and settled in a new area, you have to call customer service to request a 'regionalization Reset'. Avoid any accusation to this effect; It is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works. See the document on regionalisation.

  http://support.HP.com/us-en/document/c02558798

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• HP Deskjet 3070: HP Deskjet 3070 extend the wifi signal

  Is there a possibility to extend the printer HP Deskjet 3070 wifi?

  No sorry.

• HP Deskjet 3070 (All-in-one/Wireless) install problem Win 7 64

  Hello world

  I wonder if others have had similar problems or ideas on the underside, surely I can't be the only one to use this installation/suffering with this problem.

  Printers: HP Deskjet 3070 All in One (USB/Wifi)

  Operating systems: Windows 7 64-bit (installed absolutely fine on Win 7 32 bit laptop computer connected via wifi).

  Setup: - a Homehub BT, providing WiFi for laptop (Win7 32 bit), a desktop computer (WinXP SP3), the printer has an IP address, which is visible on the home network map - it has a MAC address also. My PC: connected by Ethernet to the homehub which is currently running wifi for all of the foregoing.

  Drivers using downloaded: -.

  + Computer laptop Win 7 32 bits connected via WiFi to the Homehub - installed fine, found printer - this is the stage where the printer receives a configuration intial IP address / completed.

  + WinXP SP3 connected through WiFi to Homhub - as above, correct, opportunity driver found the printer (which, at this time already, there).

  If the printer exists within the network, other computers can see / use it.

  ++ My PC: Win 7 64 bit connected by ETHERNET to Homehub (she does not and will not have a wireless option).

  Downloaded the drivers to install HP. (later tried "Run as Administrator"), select the software components (i.e. Remove feedback/coupons etc), installs OK applications, next step is the configuration of the printer. Add a new printer. "Check network" window appears with the message "Checking network environment" bar and the State. The status bar springs upward but stops dead at the filled Stadium. No possibility to choose whatever it, pressing Cancel has no effect. End of task here generates an error of 'work '. 'devicesetup.exe' stopped The installer never ends, applications are installed, but at no time, it shows the printer/selection.

  I tried many things: complete uninstall "engines", which in this case seem to be the only applications, ensure that all non-essential startup items are disabled, make sure that the firewall is DISABLED (just to be sure), ensure that the anti-virus is disabled there is, in fact, no other printer installed (this computer never had a printer attached to it) make sure file sharing and printing are powered, ensure that there is no TCP/IP/ports printers mapped etc... Still the same error, old or new drivers, always the same - installation does not complete.

  All the doctor diagnostic tools/printing tell me I have to install the driver software (I agree) but direct me to the HP site to download the ones I already have.

  I can't enter the Server Web integrated (the PC where I can't install the drivers, or one of the 2 PC's who have installed correctly). One of them if I click on networking or wireless or advanced it warns a HTTPS connection and then fails with "internal server error".

  My questions to someone kind enough to read this wall of text: -.

  + Anyone has any ideas please? I would prefer not to return the printer as defective because it seems to be a good all-rounder and it works for 2 other PCs in the House, its just mine which does not connect! Sad...

  I'll try the USB installation and then removing the USB-> wireless to see if that can help. I had previously seen articles where people offer to buy a router to 3rd party like that is basically a wifi pass through broadcaster. It is not for me thanks

  Thank you all for reading at least, it's now corrected with slightly reduced functionality.

  Install the USB printer, then DO NOT convert into wireless via HP drivers/installation.

  Change the USB to a TCP/IP port port newly created under the control panel of the printer (windows 7), enter the IP manually to the printer - you want an IP address that will change not in order to make this work - forcing the Home Hub to never provide that the same IP unique to this particular device was the easiest way for me. This connected but showed as offline printer constantly, others may have different experiences.

  To fix that (for me): -.

  Installing the printer in Control Panel Goto, force reinstall drivers HP ("via the drive"). Make sure that all the old files are overwritten. Turn the printer and then turn on (power button - twice if in mode "standby" to disable). Wait until the wireless light will stop flashing and become solid blue. Check in Control Panel if the status is online, if so you are good to go

  As a result of this sabotage, you lose the feature advanced scan for PC etc etc, but the real impression seems to be absolutely perfect. The printer is always available to everyone on the network, etc.

  Good luck to all.

  Alex

• copy with HP Deskjet 3070 B611 Series problem

  Good evening

  Usually I get to make copies with my HD Deskjet 3070 B611 Series printer, whether in black or color.

  But I have a problem today, the copy in black does not have my leaf spring all white, there is nothing so it works always in color, of course my ink cartridges are still full.

  Could you tell me what I can do to pay to solve this problem.

  With thanks advance

  http://support.HP.com/us-en/document/c01956550

• Problems installing HP Deskjet 3070 in cartridge.

  I had problems with the work wireless on my "HP Deskjet 3070 all-in-one printer" and after trying different solutions, that I found on the HP support, I decided to give in and factory reset it.

  This gave me a new problem, the printer must now cartridges setup of, well, put in place. I keep after they failed so I tried reuse them for installation, but they do not work because they have already been used. Is it possible I'd be able to get new ones?

  Hey Ryan,

  You restore the default settings of the printer setting menu?  If this isn't the case, then you had to access a special menu?

  Do you have what reset selected?

  Also, the cartridges of CONFIGURATION are not able to buy from a retailer.  The only way to get the cartridges INSTALLATION is through HP Technical Support.  I don't know what options they have for you in this case are, but I know that they are the only ones with these cartridges outside the original, the value provided with the printer.

  The phone number for the United States / Canada HP Tech Support is 1-800-474-6836.  If you are in a different region, so please click here to access the global contact list for HP Technical Support.

  I hope this helps.

• HP deskjet 3070: problems with connection to internet writer

  could someone tell me how to get my burner to connect to internet when I moved. the writer does not recognize the internet here.

  Hello

  From the control panel select devices and printers, right-click and delete any which instance of the printer.

  Then click the icon on the installation or the pritner wireless > Wireless, default restoration, the network and restart the printer.

  Noah open the HP Deskjet 3070 software and select Connect a new printer, follow these steps to reconfigure the wireless connection.

  Note: a temporary USB connection may be necessary to transfer the new settings of the printer, the installation invites you to insert such an if necessary.

  Shlomi

• Problems with HP Deskjet 3070

  I bought an HP Deskjet printer 3070 all in one series may a year ago.  He started having glitches and developed a split personality because he is not sure whether a copy of HP Deskjet 3070 B 1 series, a series of printer HP Deskjet 3070 B, he is certainly convinced that it isn't a HP Deskjet 3070 series, which he says he's on the box. When I download a for example crossword, I gives me all these choices of different printer.               In addition, now has a fit of spite for when I put an envelope in the printing of the address, he spits on the envelope and then in prints of triumph of the address on the next piece of A4 below.

  Anyone have answers please, before I eject it by the open window in the pond?

  Moved from feedback

  Original title: impression of the printer

  Hi, GeoffReesQT,

  What version of Windows are you using?

  There are several printers used by the system?

  Try the following and see if it straightens

  Start > type Services.msc
   
  Press enter
  Scroll down to print spooler
  Right-click on the spooler > select Properties
  Make sure that the Startup Type is set to automatic
  Under the service stop status
  Wait for Windows to stop the printer
   
  Control Panel > open the printer folder
  Right click on the printer icon > select Open
  Do you see the documents listed in the queue for printing?
  Click file > cancel all Documents
   
  Start > right click on computer > select Manage
  Click on continue on window UAC (Vista, Windows 7)
  Select Device Manager
   
  Click on the + sign next to Ieeee... compatible printer
  Right-click on the printer driver and select uninstall
  Click on the + sign next to the imaging device (s)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to printers
  Right-click on the printer driver and select uninstall
  Click on the + sign next to Bus USB controllers
  Right-click on the printer driver and select uninstall
   
  While the printer is turned on, unplug the cable from the rear
  Unplug the cable from the wall outlet
   
  Wait 5 minutes
   
  Plug the cable into the wall jack, and then the back of the printer
  Restart the computer

  Go back, and then restart the print spooler
   
  Go to the manufacturer's website and search for updated drivers

• DeskJet 3070 B611

  Printing HP, via WiFi, software works perfectly fine for me. However, one annoying aspect of this is that computers on my home network, using the printing software, all seem to be 'busy' when the printer is turned off. I mean 'busy' as opposed to the "idle" (which is how they should be when you do nothing with the computers other than of have turned them on). When I turn on the printer, then all computers appear to be 'lazy' again. Can someone help, please?

  Hello KAT.

  Welcome to the Forums of HP Support! I want to help you with the frustration that you have expressed, I understand when your HP Deskjet 3070 is turned off of your computers, read it as "occupied" as opposed to "Idle" that you would normally expect because it is not used.

  Computers see the Deskjet 3070 as busy it is because the printer is not available, the computer is not able to see the printer on the network then it reads as "busy". Now when you turn on the printer, the status changes to 'idle' that the computer can now see the printer on the network and is ready for your order.

  Think of it as the Deskjet having a NAP, I know when I have a NAP, I feel full and will not lol but once awake I stay 'inactive' and ready to go, as does the DJ 3070.

  That being said, I want to just make sure when you turn on the DJ 3070, you are able to print from all computers with no problems?

  I hope I could do the light on your question but you also give a laugh! If you have more questions-Ask, I'd be happy to help you!

  Thank you

• DeskJet 3070 ceased to print a few days after replacing the black print cartridge

  Please help me, I have HP Deskjet 3070. There works well since then, but I replaced just the black cartridge with original ink and he confirmed that it was a real ink, I printed a few documents and everything was fine and it's just less amonth ago.

  But unfortunately I turned on the printer a week later, but it prints, it only passes through the paper as if it is printing but instead he brings her on a white sheet.

  The task of mentenance using I could see the State of health, says the good. Show full of ink cartridge ink level. Device report - derniŠre indications affixed some pink, blue, yellow rectangles and the printed report print 4 holders.

  I noticed someone has posted a simlar here question one obtained help same day via private message that he has fixed his problem, I commented here a week ago and had asked for help, but have had no response to date.

  Today, I installed a new black ink, thinking that he could be in ink, but she does not always print anothere.

  Please help me.

  New replacement printer arrived today with the new inks, installed game machine with the new inks and everything works as it should. Old machine is to immerse for recycling as advised.

  I'm relieved and I appreciate the after sale HP just rendered services. Although I am a little worried and now fear that it could happen again "after the guarantee" since no clear explanation is given in what concerns what could have caused the failure. And judge with an option of replacement is the best solution, it seems like the cost of the den could be greater than the value.

  Finger is crossed, I hope that it will serve this time or at least give reseonable service before getting on my nerves.

  Thank you HP.

• HP Deskjet B611 3070 series: HP Deskjet 3070 series B611 Scan Driver error - failed to scan

  Tried for awhile scan documents, etc., I am unable to do so.  I tried the HP print and doctor Scan and the message that I have for them is "this tool was unable to resolve the problem even after a reboot" someone at - it had a similar problem and managed to resolve it? Any help would be appreciated please.

  Hello @Tricia2,

  Welcome to the Forums of HP Support!

  I would help you today to solve the driver Scanner error you receive when you try to scan from your HP Deskjet 3070 e-all-in-one printer to your Windows 7 computer. Thank you for including the troubleshooting steps you tried before reaching out for support. Because the HP print and the tool of analysis of the doctor could not solve the pilot error that you are experiencing, I'll run through some software manual and driver troubleshooting steps. Can I please you follow the steps below.

  Step 1: Uninstall the device:

  For the purposes of troubleshooting, it is crucial that we have a clean slate to work with your computer. Therefore, before you perform the "fix" I'll take remove you the package driver HP full software functionality of your system. If you use a USB cable connection between your HP Deskjet and your Windows computer can I please have you unplug this cable now.

  1. Click on the Start menu
  2. Select all programs
  3. Select the HP folder
  4. Select the HP Deskjet printer
  5. Select Uninstall
  6. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Install the device:

  1. Please click here to download the package full feature software and driver for your HP Deskjet printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, do not connect the USB cable until the installation screen invites you to
  4. Once the installation is complete, please try to scan the image.

  Please reply to this message with the result of your troubleshooting. If the problem persists can tell you if your printer is connected via USB cable to your computer, or a network connection. I can't wait to hear strings attached good luck!

• Missing configuration for deskjet 3070 cartridges

  Hello

  I have a deskjet 3070. I have always used HP original cartridges. currently I could not print in black and bought a new cartridge. Still, I had the same problem and ran cleaningprogams HP several times. Without a bit of luck. Then I changed the chartridge with a new... And now, the problems started. Now the printer asking setup inialize the printer cartridges, which I did not and I was never informed, I should keep these anyway.  I looked for answers to the problem of several places, but without a bit of luck... So what to do now. I am thinking of buying another brand, or is there a solution?

  The store gave me a replacementprinter, so problem solved

• 3070 connectivity problem - multiple Accespoints with the same SSID

  Hi all

  I have a problem with my printer HP Deskjet 3070 printer all-in-one.

  I have 2 accespoints with the same SSID for better coverage of the pit of the wireless home network.

  For some reason any my HP printer keeps losing wireless connection when the 2 accespoints are rising.

  I use a different frequency for the 2 accespoints channel and it works fine with all other wireless devices.

  I did that a DHCP are used, r, but in fact it doesn't matter because the printer uses a static IP (192.168.0.3)

  When the two AP is the printer loses wirelesss connectivity. (The blue led will blink)

  If I take one of the accespoints offline, the printer becomes available.

  Is this a problem on my end or a problem of software/firmware printer?

  Kind regards

  -eth0

  Lol this is not very clear to me?

  But it is very good that we continue here:

  http://h30499.www3.HP.com/T5/printers-DeskJet/3070A-connectivity-issue-multiple-Accespoints-with-the-same-SSID/TD-p/5865699#.UKNyiYatlI1

• HP Deskjet 3070: cartridges missing or defective

  I put new cartridges in printer Deskjet 3070 and now the error message is displayed: cartridges missing or defective. I placed the new cartridges and cartridges is not error. Are the cartridges default?

  Hey Cheeseslicer,

  The best thing you can do is to give the printer a hard reset

  Also replace the cartridges might solve the problem.

  Insert the old cartridges you also find the error?

  Please let me know.

• HP Deskjet 3070 with windows 8

  Could someone please help me find the drivers for HP Deskjet 3070 for windows 8?  The CD that came with the printer doesn't support windows 8.

  Thank you

  No problem at all, I'll be happy to help you find the drivers for the printer Deskjet 3070.

  Here is a link that will help you with the drivers.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109010-2&cc=us&DLC=en&LC=en&OS=4132&product=5068754&sw_lang=