DeskJet 3630: is it possible to scan using the charger (Deskjet 3630)

Similar Questions

• 8500 A909G - Feeder causes black streaks on faxes/scans/print jobs... ONLY when you use the charger

  Charger cause black streaks on faxes/scans/print jobs... ONLY when using the charger... If I put something on the glass and printing fax/scan/or it... everything's fine... it was ONLY when I use the charger... did someone come up with a solution to this problem?  Looking at the other reports, it was NOT those that have been fixed... I hope that someone can help me solve this problem, as it was NOT a printer not expensive to buy...

  I'm sorry you have a problem with the vertical lines in the ADF.

  Try to clean with water and lint rollers. There is also a glass of small strip (rectangular) when you lift the lid. Also clean.

  Here is a link that can help you too.

  http://support.HP.com/us-en/document/c01618140

  Let me know if it helps.

• dirty scan image when using the charger - m225 printer

  use of m225dw printer for 4 months now. scan of the magazine images have vertical lines all over the place in the document.  Please advise how to clean the part of the supply. I don't think I have the same problem when scanning using the glass. Please tell us how to clean the description step by step including feeder (?) for parts, etc.

  The fix is usually very simple...

  When you get the lines while using the ADF documents and not from the scanner glass, it is because there are a few pieces of paper/dust/something in the small drop of glass at the bottom of the glass.

  Lift the cover and you will see this tape from a window, just under the side where the paper feeds.  Where is the scanner parks actually 'see' the paper as it rolls.

  Carefully remove the pieces with a can of compressed air or a brush.  They line up right where the scratches are usually.

  I had this problem with my 8600 before HP and found the answer here on the Forum!

  WyreNut

• Is it possible to continue using the LR app for iPhone without having to pay (after the 30 day track)?

  Is it possible to continue using the LR app for iPhone without having to pay (after the 30 day track)?

  Without having to pay US $ 149 - or 9.90 per month?

  I'd really like to get a positive feedback.

  Thanks in advance!

  The latest mobile versions are free to use, but for a full synchronization with Office LR CC is required.

  LR Mobile without subscription

• My problem is with the scanning. I can't use the charger of the scanner, it always scans go flat.

  My problem is with the scanning. I can't use the charger of the scanner, it always scans go flat.

  Also, when I scan several pages, just the first page is scanned.

  Adobe/Acrobat Reader cannot parse documents; What software do you use?

• black vertical line when using the charger on my HP 6500 E709n

  When you use the loader on my HP 6500 E709n, I get vertical black line in the middle of the page.  It appears on outgoing faxes just like any time I copy or scan.  He can't if I lay the originals directly on the glass, only when you use the charger. I am new to this forum (or any forum also), but I looked at the messages about similar problems with other models, but have not found a solution.  Can someone help me or point me in the right direction to find an answer?... Thank you!!

  See post from 20/09/11... It must be gently the magazine cover to reveal that the slot of the animal auto scan and clean only...

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• LaserJet Pro 200 color MFP: print problems when you use the charger

  Copy and scan works very well when I place the original on the glas

  However, if I use the charger a straight black line appears from the top down in the middle of the copied or scanned document.

  How can I fix

  Thanks, MariusMo

  Hi MariusMo,

  I'm glad that the problem has been resolved with the cleaning.

  Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

• 5610 all-in-one - black thick top of line down on the pages scanned using the scan feeder tray ONLY

  Using HP Officejet 5610 all-in-one I've had for years and maybe 6 months ago, I noticed that anything that is analyzed by the load plate (if you need to scan a bunch of pages without having to analyze each page individually between analyses what is tedious that need constant attention) has this thick black line goes up and down on the middle left of THE pages scanned. Honestly, it looks really bad like if there is something hidden in this terrible line through the process of moving the paper through the feeder, BUT the original is just fine without damage.

  If I scan just a page by placing the document on the scanner glass, and then NO matter whatsoever.

  100% reproducible every time.

  So I know that it has nothing to do with the glass (which is clean), but only when the scanned document must pass through.

  Checked the forums for similar problem and found no exact match.

  I imagine that an expert out there knows the answer to that high hand. IF you could speak up, I would appreciate it.

  I THOUGHT ABOUT IT!

  I read another post:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-OfficeJet-Pro-8500A-plus-vertical-black-lines-only-when/m-p/1391261/highlight/true#M30268

  who is mentioned on opening the ADF cover. Well I opened the whole Assembly, having absolutely NO idea how it all works, and I found a 1 "x 8.5" thick mirror (for lack of a better term) who had what looked like white paint on it to the place where the pages were probably getting the black line. I scratched, retested and the question was gonzo - that's all!

  Then my wife just told me that she thinks that she knew what the problem was all along. She had put on a page and it had not dried, and she tried to put it in the charger to make a copy. She just thought that we were going to replace the printer even when and if ever, let me know. During this time it was me mad for months. What are you laughing at me? This all-in-one works very well for years - replace without good reason, must learn a new product, get new cartridges, out the same old, same old, NO way. If it is not broke, do not replace it!

  Detective Conan.

• HP Color Laserjet 277dw MFP: how to scan using the smaller files, such as JPEG and PDF formats

  The scanner automatically saves files as TIF, which are too big for my needs. How can I change this setting to save the files scanned in JPEG or PDF format?

  (I scan using only HP Easy Scan of my computer, because my home computer is not on a network, I can't use the scan features Control Panel (scan to e-mail, etc.).)

  Thank you!

  This document crosses using HP Easy Start to scan:

  http://support.HP.com/us-en/document/c04788799

  But basically when you save the file, you can select the format.  In the drop down next to Format: select JPEG or any other file format you want.

  To set this as a default use the Edit option in presets to create a new or edit and existing preset.

• HP Office Jet 8600 Premium: scan using the glass rather than the feed document dumpster

  Hello, I have the above printer and I would like to analyze an old photo using the technique of the flat bed scanner rather than feed the loading of documents. Can help you with this?

  Thank you

  Casey20131

  Sure.  In your scanning software select flat instead of document feeder.

• OJ4680 will not scan using the Solution Center. HP scan Diagnostic Utility reports error Twain

  Running XP Pro, photosmart Intalled worm 14 software.  Major problems. found a file system Windows corrupted & corrected, but I can't yet scan Solution Center.  Run the scan diagnostic utility HP reports a Twain error.

  The Twain component is not working properly because the product is used by another process.  Without this component, you cannot scan with the HP Solution Center software and some other applications.

  Is the Twain driver this isuse by another process and how to determine what I should do to fix this problem?

  I uninstalled, rubbed & reinstalled the software several times without any change in the results.  What can I do next?

  Thank you

  DWB

  Good question.  I never got a response.  I would only be able to help.  After having browsed the forum looking for answers, I found one with a reasonable solution.  Piece of HP printer and buy an Epson.

• lost to microsoft wireless optical mouse usb connector - is it possible to continue using the mouse without the USB?

  I lost the usb connector for my 2000 microsoft wireless optical mouse for my laptop to recognize it.  Y at - it a download for my wireless laptop, so I can still use this mouse or is it still possible without the USB?

  Hi TA68.

  ·         Are you referring to transmitter/receiver for the wireless mouse?

  If so, you won't might be able to use the mouse, unless you have the device. See the following article for more information.

  How to replace hardware or lost, broken, or missing Microsoft software

• Setup of SCANNING using the file/etc/hosts

  DB version: 11 GR 2
  Operating system: Sun Solaris 5.10
  Node 2 Rac
  
  
  I've done all the configuration of connectivity hardware/software/SSH for the installation of RAC. Now I have connected as a user of grid and try to install the clusterware ('Grid Infrastructure')
  
  I have implemented Public IP and IP private for nodes according to the oracle documentation. We do not have DNS for these nodes. So we thought to use the file/etc/hosts.
  

  Node1's: Public IP : 10.80.143.214
  Node1's: Public IP : 10.80.143.215

  Question1.
  When I ping 10.80.143.219, it wrong; which means that this IP address is not allocated (not used by any node), so I tried to add the following entries on the file/etc/hosts of two nodes

  10.80.143.219  danube-scan.scott.com  danube-scan
  10.80.143.219  danube-scan.scott.com
  10.80.143.219  danube-scan  

  None of the above worked, and I kept getting

  INS-40718: Single Client Access Name (SCAN) name:string could not be resolved.

  Can someone show me how as the SCAN entry next to the file/etc/hosts?
  
  Question2:
  The file/etc/hosts, how Setup identifies that a particular entry of the IP and host name is intended for ANALYSIS. If the word "scan" to be present in the SCAN entry?
  
  Question3:
  The grid Setup will prompt you for
  1. name of the cluster
  2 SCAN the name
  3. port SCAN
  
  For a Cluster name. I can give any name that I love. Right?
  
  
  Question4.
  
  SCAN name must belong to a domain of DB as (scott.com as shown above). Cannot create a database RAC 11 GR 2 without belonging to a field of DB?

  Hello

  Try ping this host of the danube-scan in any army, this command must resolve this name in all hosts.

  That is to say: the server does not respond to the PING, but must indicate the IP address.

  Check...

  The 10.80.143.219 IP address must be the same subnet in the public network.

  This section below should be/etc/hosts in all hosts in the cluster.

  the danube - danube-scan scan.scott.com 10.80.143.219

  To configure your host to perform searches in hostname to host files, change the line that starts with hosts: to include the keyword files. For example, if your file /etc/nsswitch.conf hosts line looks like:

  hosts: files dns

  Change it as follows:

  hosts: files dns

  The order of keywords on this line indicates the order in which made Solaris reference the name of services. Keyword files represents the file/etc/hosts.

  Kind regards
  Levi Pereira

• Is it possible to only use the keyboard to move a window on the desktop?

  I have a lot of fun trying to do it all with just the keys and trackpad not.  One that I'm missing and it would be very useful would be to find a way to move windows with just the use of keys.  I expect the arrows would be involved, but to do something about the window I want to move.

  I believe you can use the best tool to touch (http://www.bettertouchtool.net) to assign keyboard shortcuts to move the windows.