DeskJet 3755:3755

Similar Questions

• DeskJet 3755: Extremely slow printing, work stuck in the print queue

  Hey, I just bought a HP all-in-one Deskjet 3755 and put it in place and recorded. It is connected to my network, but I'm having a few problems.

  (1) the printer will only print jobs when it is connected to my computer by USB, even if I connected wireless.

  (2) print PDF print jobs EXTREMELY SLOWLY, over a minute for a page of text.

  Please do not just link me to support.hp.com pages... for some reason, they do not load on my computer (see the place completely empty, even if the HP site support work and charges).

  Thank you!!!

  Hey @anb9495,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the slowness of printing for the all-in-one printer Deskjet 3755. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to troubleshoot slow printing with your printer.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• DeskJet 3755: Photo printer

  I recently installed a Deskjet 3755 and an icon for printing of photos called 'HP Photo Creations' was created on my desktop.  When I try to open the program I get a message saying "your system administrator has blocked this program" - I am the system administrator, so how can I access this program?

  The error is probably due to a program by security. We have seen conflicts with the CryptoPrevent, which left some junk behind when the computer updated for Windows 10.

  Contact RocketLife directly at [email protected]. If you wish, they can put up a session 'connect' so that they can see what is happening with your computer and help to resolve this.

  Here is an example where we have been able to repair the remote client computer:

  Installation of photo creations

  Thank you

  RocketLife

• DeskJet 3755: 3755 DeskJet cut the bottom of the PAge

  When I print PDFs online, my printer always cut the bottom of my page. When I print a PDF from adobe, I am able to print the whole page without it cutting off the coast, but with a hateful tab of space between the end of the document and the bottom of the page. I don't want this extra space at the bottom of my documents. How can I get rid of this? I use 8.5 x 11 paper and my printer is set on letter-sized paper. I don't want that extra 1/2 inch space.

  Hello

  It is a limitation of the hardware, according to the list of its specifications:

  http://support.HP.com/us-en/product/HP-DeskJet-3700-all-in-one-printer-series/8954253/model/11262035/document/c05046448/

  See the paper output > margins print, is 12.7 mm (0.5 in.) minimum lower margins which cannot exceed the pritner.

  Kind regards

  Shlomi

• HP deskjet 3755: problems copying and scanning

  I'm trying to copy for the first time. Copy comes out about 3/4 size of the original with a broad black band at the top.

  Also I can't find any instructions online at HP on how to scan.  There is no scan on the printer button.

  I use a wireless connection and did not have problems printing.

  Hello

  1. copy: do you have copied the whole area?

  3 scan: no, the printer is not a Scan button, you must start your computer (s). Please use instructions from page 41 of the following book:

  http://h10032.www1.HP.com/CTG/manual/c05152483.PDF

  Kind regards.

• HP Deskjet 3755: "this wifi network is not supported by the device.

  I tried to connect to my wifi on campus, and this error message keeps coming up. I have no idea of what it is supposed to say, and I can't find anything online. Is it a mistake that I receive because the wifi will not connect or is there something I can do?

  As an aside, I could run a 32 bit OS, I can never remember.

  Hello
  
  Thank you for using the HP Forums.

  Campus WiFi usually disables the print connection.  You should probably check with the campus administrator that allows you to connect your printer.

  One suggestion is to use the phone as a Hot spot of (note that this will be data charges!)

  This resource will show you how it's done:

  How to connect to a hotspot to print and scan

  Hope that helps!

• HP Deskjet 3755: Adding a password for direct thermal printing

  I'm trying to set up a password for wifi direct printing, but no where in my guide game didn't he tells me how. I'm in College and I live in a dorm, if I don't want everyone access to print from my printer. How can I do so?

  Hello

  If your printer has a front LCD, access the wireless configuration wizard and scrolling through the menus until you find the menu live wireless. You should be able to find a menu option called 'wireless security direct' or something to that effect. When you put this on, it will put a wifi password direct in place.

  To find your password wifi direct (the password you need to enter to connect to the WiFi printers direct) yuousually hold down the button to password wireless direct on the front panel for a few seconds and to print.

• DeskJet 3755: Instant ink

  I bought my new printer about 2 weeks ago and installed cartridges setup. At that time, I did a not sign up for snapshot of ink.

  Ten days later, I ran out of ink and bought a few cartridges in the store and installed. In view of the price paid for them, I decided to register for the moment ink.

  Now, I get a message that they are not instant ink cartridges and the instant the ink plan will begin when I install Instant ink cartridges...

  I receive mail under the plan? If so, how long will it take?

  If not, should I install my cartridges to install again? Is it "moment of ink? If this is not the case, what should I do?

  Thank you.

  @Teyssier

  My apologies for the confusion; I do not fully answer your question regarding the type of cartridge.

  Install cartridges are not instantaneous cartridges - configuration Cartrides are used to initiate the printer on first use.

  • You can choose to use cartridges of setting until they are exhausted
  • You can choose to remove the cartridges of configuration whenever you want to do (for example, to install other ink cartridges / instant)

  Although I do not use the Service to instant ink, I can't imagine there is a way to receive instant cartridges other than the agreed method, that of the Postal Service.  However, I'm not on the staff of support at the moment of ink - maybe (with supplement), you can arrange to have cartridges sent by overnight service.  To make it just a little more frustrating for you: today is a holiday in the United States - Support Instant ink may - or may not - be available by phone during the holidays.

  If your printer is ink and you plan to keep the printer for a while, you might consider buying the necessary "at cost" cartridges while you wait for your instant ink cartridges.

  You might also consider asking a friend print your documents (assuming that you trust your friend with the content).

  Good luck!

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• hp deskjet 990cse printer driver

  I have an old HP Deskjet 990cse printer which needs a new driver.  I've recently updated for MacOS Sierra, and now the printer does not work.  I can't find an updated driver on the HP site.  Disappointment because the printer still works fine.

  Someone at - it a similar problem?

  Thank you.

  I managed to make it work.  I went into system preferences and deleted and then added the printer.  He now uses a generic driver.

• Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

  There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers:

  DeskJet 710

  DeskJet 712

  DeskJet 720

  DeskJet 722

  DeskJet 810

  DeskJet 812

  Deskjet 820

  DeskJet 822

  DeskJet 1000

  The attachment contains a fix for this problem for Vista and Windows 7.

  [The patch does not work for Windows 8, 8.1, or 10 x 64 systems.  There are efforts to this address, if a solution is developed it will be shown here.  [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}]

  First of all make sure that the driver for the installed printer.  If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.)

  Apply the patch as follows: log in to the computer with an administrator account.  Download the patch by clicking on this link or on the trombone at the end of this post.  Save the hotfix on your computer, then unzip it.  Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3

  Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows.  You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place.

  This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste.  Depending on your UAC settings, you may need to provide confirmation.  Also allow existing files to be replaced if you are prompted.

  This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7.

  Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch.

  Update - here is that of the more detailed installation instructions:

  Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer.  Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command:

  MD c:\temp

  CD \temp

  Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination).

  [Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.]  If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.]

  Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...)

  *. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others).

  Net stop spooler (ensures that the files are not in use.)

  Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)

  Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)

  Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy)

  NET Start Spooler

  Output

  [Edit - note that these DLL files will already be in the directory.  You will get a warning asking if it's OK to replace the files, say "Yes".]

  At this point, the patch is installed and ready to print.

  Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel].   If you use a make you converter USB / parallel it is supported in your operating system.  The following messages are reported by cables USB-parallel that are supposed to work in Windows 7.   A driver is required for the converter USB / parallel besides the driver of the printer.  For converters supported, it is usually provided automatically in Windows 7.  Note: the appropriate to select for USB-parallel converter port is often USB001:.  I've heard of cases where the port was USB002: or LPT3: as well.  If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab.

  Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4

  If you use Windows 7 do the following: log in as a user with the administrater properties.  [The following assumes that you are using IE as your browser] Click on the here link and select "Save".   Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all.   If extract all is not an option, then click on "Open with" and select Windows Explorer.

  

  Leave the default directory and check the box "Show extracted files when you are finished", excerpt.   Click Start, computer, and type % windir%\system32\spool\drivers\x64\3.  Arrange the windows so that you can access the two parts of the window.  Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll.  Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box.

  Note: %windir%\System32 is a system variable that points to the Windows directory.  For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer.  If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory.

• HP deskjet 3540 series (D142AF: print validation error)

  I am trying to print from my computer hp laptop on my wireless printer and I got valedating of the printer... Please can you help me now?

  Welcome to the HP Forums!
  I hope you're well @denden2-_bé

  I read about the error you see when you try to print from your system from Windows 7 to your Deskjet 3540, and I hope to help.

  Please try using Print and doctor Scan for Windows to help troubleshoot printer problems

  If the tool does not help, try to print from other programs, uninstall and reinstall the printer.

  If the problem persists, let me know the details.

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

• HP Deskjet 2640 Jet advantage: printing without margins

  I would like to know if it is possible to print borderless with the advantage of Jet HP printer jet 2640 engineering.
  If possible, I would like to know how to set up the printer for such an impression.
  Thanks for the help

  Hello

  Your ptintrt doed does not support borderless printing. Full stop. The best you can get for border is round 3.2 mm for L & r 1.5 mm for Top and 14.5 mm for the bottom.

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-2640-all-in-one-printer-series/5357278/document/c03802179/

  Kind regards.

• HP Deskjet 3512 e-all-in-one Deskjet of HP P: 3512 e-all-in-one printer does not "standby mode"

  Printer will not wake from sleep mode.

  It has a static IP address. Works very well once he wakes up to the top. Doctor of Scan cannot even find it when he's asleep. 2 computers on home network have the same problems. Is there a way to disable the mode 'sleep'?

  Hi @tedd1,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 3512 does not wake from sleep mode. I'm happy to help with this problem!

  Please make sure that the auto power off feature is not turned on. As when it is off, you manually turn on the printer after 2 hours.

  Automatic stop function

• DeskJet F2180 + Vista 64-bit

  Hello

  I am currently in the situation that I need to print something, in the case of witch, I decided to use a HP Deskjet F2180 I had laying around. I use Windows Vista Ultimate 64-bit so I thought I was good off to download this file. Appearently that was not the case. It fails during step 3 of 4 of the installation process.

  The error States:

  SourceFile was not "C:\users\***\AppData\Local\Temp\7zSA5E7.tmp\setup\Toolbox\Toolbox1030.cab".

  And then it pops up with another error, a word on ""C:\users\***\AppData\Local\Temp\7zSA5E7.tmp\setup\hpzmsi01.exe " "

  Then it analyzes the log, and this is what is said:

  Error code: 193060200

  Now Launching = x: \hpzmsi01.exe - aioproduct_min l - XXX the list f
  X:\DIVins?. DAT
  Error message received: Sourcefile not found: X:\Toolbox1030.cab
  Make sure that the file exists and that you have access to it. -I am sure that I run the installer as administrator and I have access

  X:\Toolbox.msi failed with return code 1603
  MSIInstall() failed with 1603 for MSI Toolbox
  Exit code = 1603

  I hope that's enough for you give me a way to fix this detailed

  Sincere greetings

  its

  Message edited by its on 2008-11-23 14:46

  Try to download the software from this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-64285-1 & LC = on & DLC = in & CC = US & Product = 3177562 & os = 2100 & lang = in

  Save your desktop and run it from there...

  Keep us abreast of the concerns

• DeskJet 3632: Installing the software with the IPad

  Hi all, I just bought a deskjet 3632, I do not have a PC or laptop, so I can't install the software on the disk.

  I have an iPad,

  Please could you guide me through the steps of the installation (if possible) I've done a major boo boo, I bought the HP1512, not even give it a second thought that it would not be wireless.

  Thanks in advance

  Kee

  Hi kee,.

  Download and use the HP AiO Printer application to set up your printer on your wireless network If you have router:

  http://support.HP.com/RS-en/document/c03561640

  Open the app and click Add a new printer, and then follow the instructions on the screen.

  Note: f you can't find the name of the printer with the "setup" from the list of WiFi from your iPad, reset the printer settings by pressing on and now the buttons cancel and wireless on your printer for 3 seconds, then turn on the printer and make sure the WiFi switch on the printer flashes, otherwise press the WiFi button, and it starts flashing.

  Then follow the steps in the article to print and scan, so you can use AirPrint to print from your iPad:

  http://support.HP.com/us-en/document/c02623193

  If you have a router, connect directly to the printer using WiFi Direct, as shown below:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-4510-e-all-in-one-printer-series/5285997/model/5383027/document/c04090221/

  If you need to find the WiFi Direct password, press the Information (i) and the WiFi Direct () buttons to print a sheet with WiFi Direct name and the password, the same steps apply to print using AirPrint and scan using HP AIO remote.

  Kind regards

  Shlomi