DeskJet 932C

Similar Questions

• DeskJet 932C - the power light is on and the cartridge flashing

  Hello! I know my DeskJet 932C is 'old', but it seems to be in excellent condition.  First time that I had a problem.  The power light is on and the cartridge is flashing.  When I open the cover, the plateau of the cartridge moves to the far left.  The arrow points to the unfortunate color cartridge.  The missed years ago color cartridge.  I use my printer to print B & W, so I've been printing with the empty cartridge in place for years.

  I removed a reinserted the color and B & W cartridges and turn on the power and turns off.  I used the HP print and scan doctor, and it's scan does not have something wrong, I clicked on print a test page, and nothing happens.  The test page is listed as 1 document in the queue.   Status: error - printing.

  The printer has been in its current position on my desk for years.  It was not known of any trauma... None does damage... no power failure.  It's clean.  Has been connected to 4 laptops and uninterrupted service.

  I prefer not to buy a new color cartridge.

  Would appreciate help.  I would like to know what it means and if there is a solution.

  Thank you!

  Focus21

  The printer will perform electrical cartridges to light control and a few other times.  If an error printing can be blocked to avoid damaging the printer.  Clean the contacts of the cartridge as shown in the document here can solve the problem, otherwise you will probably need to replace the color cartridge.  The 932 Deskjet will allow printing with an empty cartridge, but for years, the cartridge may fail electrically and needs to be replaced.

• Mac os 10.6.8 does support deskjet 932C?

  After the last update, I was unable to print anything through my deskjet 932c. I just get printer error messages that basically say that my printer driver is not installed. I tried everything I can think of few gutenprint including download free copies of the latest versions. However old the printer is, it's still usable and I would like to continue using it.

  Unfortunately, the product is is no longer supported by Mac OS X 10.6 or before, as you can find below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=115&prodSeriesId=25305&prodTypeId=18972&prodSeriesId=25305&ObjectID=c01856359

  However, you can still use the printer using Open Source Gutenprint, which can be downloadded below:

  http://sourceforge.NET/projects/gimp-print/files/Gutenprint-5.0/5.0.0/Gutenprint-5.0.0.U.dmg/download

  Users of USB connected printers (either directly, or with the USB-parallel converters) need to download "usbtb - 1.0.15.uni.dmg". It is an another USB driver which can provide better performance and features with some printers and systems. If you are unable to print to a directly connected printer, or printing stops at Midway, this driver may solve your problem. He peut also help if your printer prints very slowly, but there are several reasons why the printers can be slow and it will not solve all the:

  http://sourceforge.NET/projects/gimp-print/files/usbtb%20-%20Mac%20OS%20X%20ONLY%20usb/1.0.15/usbtb-1.0.15.uni.dmg/download

• DeskJet 932c with Vista 64 bit, a way to enable printing 2 sides?

  I have a Deskjet 932c that prints very well with my Vista 64 bit OS.  HP says that drivers are in the operating system.  When I used this printer with an XP operating system, I got many printing options, including printing 2 sides.  A way to achieve (except printing manually one by one odd number pages and then turning to print even pages)?

  Hello

  I guess you are referring to the two-sided printing module, it is available in the driver of in-BONE as well.

  Enter the control panel > printers.

  Right click on the 932C icon, and then click Properties.

  Click the device settings tab.

  Set duplex printing as installed, then the option must appear in the Printing Preferences dialog box.

  Kind regards

  Shlomi

• DeskJet 932C, Windows 7, a red and green light on the machine will not work

  Both my red light and green light are on and printer has stopped working.  What, on the contrary, do in addition to become another printer? When I press red light nothing happens. When I turn printer off and on again the same lights appear.  When I open the cover, nothing happens.  Should I throw away it and get a new one or can it be fixed?

  It seems that the camera is blocked in an error state.  There is a section in the user guide for the printer Deskjet 932C which covers when there are flashing lights.  I'll link this information below.

  The user guide can be found here.  Page 40 of the user's guide provides information about the error lights up on the product.  Follow the recommended steps and let me know the result.

• DeskJet 932c, calibration problem - thank you!

  Hello!

  I have recently switched from Win 98SE to Vista Home Premium.  My printer is a printer to update HP Deskjet 932c.  A driver is already installed on the computer.  So the printer works perfectly and very fast.  However, the 932 the disc program is not acceptable for Vista (so I don't have access to a function of "Toolbox" is important to me.)  I have a full printed version of the manual.  That tells me how to clean that my impression is heading by hand, here I need, but it don't tell me how to calibrate the printer if it was necessary.  Toolbox does this to me.

  Anyone know of a way I can download and integrate the program of the box tools online, or, even better (because I never used the Toolbox for something else that calibration - and programming Vista printer is very close to Toolbox in what it offers - anyone know if there is a calibration program that I can download line and incorporate it into my program so that I have a means of) Calibrate my 932C printer?  I have no reason to replace the printer except where it is necessary for me to calibrate it and I can't.  Final thought - I can hand calibrate the printer?

  Thank you!

  Youngbear

  Youngbear wrote:

  Whenever I change a cartridge and prints a test page automatically - Vista is programmed to do this - a calibration that happens even if my screen doesn't tell me.  I can assume that the calibration is going on with the test page.

  Yes, the printer actaully does calibration without the OS being involved.  (The calibration page will be printed and the calibration carried out even if the printer is not connected to a computer).

  Under normal circumstances, I wouldn't have to force a calibration by hand.  If the need arise, it can be done by holding the power button / stop and press and release the paper\resume three times fast print button.  Your use of the term "form feed" threw me a moment.  Did you mean the print button (a symbol of the page with an arrow right next to the power switch)?

  Yes, I'm sorry.  In previous models the button was talking to a page break button.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• How can I get the drivers for my Deskjet 932C hp? I use Windows 7 (64-bit).

  HI: I'm having trouble finding a driver hp for my Deskjet 932 C. I use Windows 7 64-BIT

  HI: I appreciate your help. I tried as you suggest "Windows Update" and I'm afraid of office series 932c or 930 does not load on my computer. I saw something on one of the forums that HP would not be able to release the map drivers for a version of Windows 7 64 - BIT for Deskjet 932C until January. I don't know if this is true or not. In my case I have good news. After I discovered that 'Windows Update' did not help, when I went to 'Printers and devices' on my computer, I noticed that an "unknown device" was loaded with my other stuff. I right click on 'Properties' and it automatically searches on the internet for the appropriate drivers. And I'll be darn my printer works. Life is good. Jim

• Windows 7 does not send print to deskjet 932c with parallel connection, help

  I got a new hard drive installed and old a cloned.  Now, I can not print to hp deskjet 932C printer in Windows 7. Printer is connected with a parallel cable. Has worked before but not after the hard drive cloning. Help

  1. There are two ports on the Deskjet 932.  One is for a parallel cable, it has a 25 pin plug on the end that connects to the computer and a PIN 34 taken to the side of the computer.  The other port is located right next to the parallel port.   This port uses a USB A - B cable, which is what you need.  The page here can help.

  I suggest the following:

  1. Buy a cable USB A - B, the right length (quite a long time to reach the computer to the printer.)
  2. Turn the printer off.
  3. Disconnect the current parallel cable to the printer and the computer.
  4. Turn on the printer.
  5. Connect the USB cable to the printer.
  6. Plug the other end of the USB cable to the computer.

  The page here can help.

• DeskJet 932C, you can print with just replace the black ink cartridge?

  My question is basically simple.  The printer DeskJet 932C can operate with only black ink?  Color ink was empty for a while now, but the printer kept working, printing in black and white.  Due to the cost of the ink and the absence of any income available, we just changed the black ink cartridge.  The problem now is that the printer will not print not even black and white.  Do I have to scrape some funds to replace the color ink cartridge, or y at - it another way to get the printer working with just the new black cartridge?

  Thank you in advance!

  Michael Sponable

  Hello

  Your printer can print in black only, but up to a certain point , you need tri-cartouche color otherwise it will not print. It's a little late now, otherwise if you only need to print B & W, a monochrome laser printer is very good and much cheaper to run (in terms of cost per page).

  Kind regards.

• Windows 7 driver for HP Deskjet 932c

  I was able to get the driver for the printer 932C of Microsoft Updates.  This process is documented here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&lc=en&dlc=en&cc=us&os=4063&product=61236&sw_lang= the basic procedure is to allow Windows 7 updates to download and install the printer as a update driver.

  How can I download and save this driver for another off internet based computer?

  Thank you

  Hello

  Access the catalog from Microsoft here:

  http://catalog.update.Microsoft.com/v7/site/home.aspx

  Type HP932C in the search box, and download the driver manually.

  Carlos

• HP Deskjet 932C printer: printer cartridge failure

  Printer has started to produce the reddish-pink text instead of black.  Images of similar reddish pink color.  Cartridge printer in the State reported no problem.  Replaced the anyway black print cartridge and printer produces black text.  Replace the color cartridge (namely that some bands has been removed) and printer produces sharp images in black and white instead of color.  It seems that the printer thinks that he was ordered to ignore the color cartridge but I can't verify that.

  How can I gewt correct color printing back?

  What operating system? The document here, we address the printer print in B & W instead of color.

  I suggest printing a page of diagnosis as described in the document here:

  Running a test diagnostic

  1. Turn on the printer.

• HP DESKJET 932C model C6427B printer

  I am owner of a Mini Acer Aspire L310 with software Windows 7, 2 GB of Ram memory, CHipset Intel 946 GZ, 32-bit system. How to get the drivers and software to use to before mentioned printer on my PC.

  The drivers for your HP product are already included in the new Windows 7 operating system. You don't need to download the drivers to use the product . Simply connect the printer to your computer with a USB cable, and Windows Update automatically installs the driver for your product. Here is the step by step to achieve this.

• Deskjet 932c rest print head to the right, make noise interference but no paper?

  My printer is jammed. Turn it on after unplugging it and print head slides to the left the pass on the right side and made a noise as if it is stuck. There is no paper jam. Can you suggest what is the problem?

  I resolved glancing at this site http://support.hp.com/us-en/document/bpd09315 thanks for help forums.

• install the printer driver for HPdeskjet 932C on a laptop HP with xp/pro

  I tried to use the original printer driver supplied with the printer HP Deskjet 932c on my HP laptop which has xp/pro, but I when he was in install mode I got a message saying "this driver is not supported by windows 2000." I would like to be able to use the printer as it stil works well, is there no driver available for this problem?

  HP has done far a very good Web site for downloading drivers for their products.
  Reach:
     <>http://www.HP.com >
  Then, place your cursor on "Support and drivers" above.  Enter "932C" in the window of product in step 2, and then click 'Go '.  Click on the printer that best describes your printer, and then click in the window "Select" to select your Windows XP operating system.  Click on 'Next' and the Driver links will appear.  Just download and follow the instructions.

  HTH,
  JW

• Impression page engine total counts for 930c Series Deskjet printers

  I have a Deskjet 932C printer.  Once told me how to print a page that gives me the serial number of my printer, the service ID, a review of FW and the number of engine total pages.  I forgot how to do this and can't find the original email that told me how.  Can someone help me?

  The number of pages can be printed as follows: turn on the printer.  With the ready printer press and hold the power button.  Holding down the power button press and release the button to jump to page four times quickly.  Release the power button and then display the test page.