Deskjet printer to connect to the computer

Similar Questions

• "Error please make sure printer is connected to the computer" when installing HP Photosmart 5515.

  Original title: my HP Photosmart 5515 will be OK: print/copy/scan to memory card. BUT...

  Running Windows 7, new printer installation, I tried HP site and Instruction Book, uninstalled and Reinstalled.

  Same problem each print/copy/scan time.will memory card OK. BUT does not connect to my laptop to scan to the computer wireless or wired, it rises "year error occurred while scanning, please make sure that printer is connected to the computer.

  Hello

  Method 1:

  I suggest you run the automated FIXIT from the link below and.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  I also suggest you to go through the steps mentioned in the link mentioned below and check.

  Scanning problems? Try the HP scan Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114802&cc=us&DLC=en&LC=en&product=5063608&tmp_track_link=ot_search#N97

  HP Photo smart 5510 and 6510 e - all-in - One Printer Series - a 'connection error' or "Computer no. detected" Error Message appears when trying to Scan from the printer control panel

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02917811&lang=en&cc=us&TaskID=101&ContentType=SupportFAQ&prodSeriesId=5159859&prodTypeId=18972

  See also:

  How can I get my PC to see my Photosmart printer of 5515 via my wireless network

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/how-do-I-get-my-PC-to-see-my-Photosmart-5515-printer-via-my/TD-p/1171265

• Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

  Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

  Hi LouiseFarmer,

  It seems there is a problem in the basic WIFI the printer setting.

  I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

• Install the device driver of printer not connected to the computer

  My printer is too old to connect to my new computer.  I want to "print to a file" and move the file to another computer on which the printer connected (this second computer is not connected to the internet). How can I install device driver on the new computer with no attached printer?

  Hello

  1. What is the brand and model of the printer?

  If you want to move the file to another computer, you can copy the file to the flash drive and move to the other computer, so that you can print the file.

  Check out the links.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

  http://support.Microsoft.com/kb/308028

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://support.Microsoft.com/kb/293118

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/move-files-and-settings-to-new-computer

• Lexmark Pro 901 printer loses connectivity with the computer

  I have a Lexmark Pinnacle Pro 901 printer I bought at the office supply store there are several moonths. I hung it, and it worked for a short period, then I got a screen prompt saying that there is no connection between the printer and the computer. I was on the phone and even authorized Lexmark technicians to have remote access to the computer 2 times. I've been on the phone with them about 10 times and had even them I would send printer back and they sent me new printer. I even had a friend local tech come and he has reinstalled printer drivers, each time, that it's the same thing, printer will work for one or two jobs and then stops printing. I can still make copies and yesterday I scanned and sent by e-mail a document, the Green WIFI light is on. I'm so frustrated that I just want to get rid of this printer. Help!

  Hi BrianParkerWX,

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en&ProductCode=LEXMARK_PINNACLE_PRO901&focusedTab=downloads#1

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• DeskJet 6940: ethernet connection between the new modem and printer does not transmit Mac

  I just installed a new modem to Qwest; It works wirelessly with my iMac 10.11. My old (but functional until yesterday) Deskjet 6940 is connected to the modem via Ethernet. When I try to print, the document seems to be transmitted to the printer, but then it hangs on and I get the message "the printer is not connected" - which it is, plugged, ethernetted, and set in motion. Support of Qwest says that only 10% of the info from the computer are the printer, but he seems to think that the part of the new modem Ethernet is functional,

  I have already tried all unplug/restart/send/add printer new check/updates / IP (cannot connect) / ethernet ports and cables, etc.

  Any other ideas?

  Thank you!

  Hi @newgranny,

  Thanks for getting back to me.

  It is good that the printer has been able to print a diagnostic page.

  Ensure that the router and firewall on the market do not block these ports.

  • About the application firewall

  Ports of printing:

  • UDP ports: 427, 137, 161
  • TCP port: 9100

  Card photo upload:

  • UDP ports: 137, 138, 427
  • TCP port: 139

  The HP device status:

  • UDP port: 161

  Ports of Web Services:

  • UDP and TCP: 80, 443, 5222 and 5223

  Hello Ports:

  • TCP and UDP: 5353 and 5297, 5298

  Unplug the wired network (ethernet cable), restore the default values on the printer.

  Restore the default settings.

  Follow these steps to reset the printer to factory default settings:

  1. check that the printer is on.

  2. press and hold down the button to report Page.

  3 while holding down three times the homepage button, press the Cancel button.

  4. release the report Page button.

  Source

  • Restart the printer.
  • Connect the ethernet cable.
  • What were the results?

  If the problem persists, try the USB connection.

  Please reply to this message with the results. Good luck!

• HP Officejet Pro 8500 A909a: Help on printer display message says: no connection to the computer

  Help on the printer screen says: no connection to the computer, but is connected via a USB cable. Also prints OK, but the HP solutions Center says: ink levels not currently available; iable.

  Well this thread of @greenturtle should help you with Troubleshooting.

  Please let me know if the Solution Center works after doing the above.

• My HP Officejet 4300 Series printer is not printing-"printer error says"no connection to the computer.

  Original title: My HP Officejet 4300 Series printer not print

  The mistake of the printer says "no connection to the computer. The computer error says: "the printer is offline. All necessary cables are connected. What should I do?

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try this method and check the status of the issue.

  Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also refer to:

  Resources for the resolution of the printer in Windows XP problems.

  http://support.Microsoft.com/kb/308028

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• printer wireless HP not connected to the computer

  My son tried hang our laptop wireless, with no result, since then the printer says not connected to the computer.

  Hi sharryn1940,

  In addition to Michael post, you can also find some good information at the following link:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to connect the printer wireless hp with the computer?

  * - Original title - the printer printing

  How to connect the printer wireless hp with the computer?

  HP all what you need to be able to complete the task... See here...

  http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html

• Photosmart HP 6510 - can't find the USB port to connect to the computer. It is right in front of my face?

  Photosmart IHP 6510 - can't find the USB port to connect to the computer. It is right in front of my face? I can't find a diagram online. do not have wireless capability. With the help of MacPro with Snowleopard.Thanks.

  Hello

  The usb port is not #22. as seen in the picture. It's in the back of the printer on the side right hiand.

  

  Best regards

  ERICO

• Photosmart wireless e - all in the habit a B110 series printer to connect to the laptop

  Hi, my laptop and printer are connected to my network, they don't connect with each other.

  Never had this problem before, can help you, thanks a lot

  Thanks for getting back to me brummyspud

  1. Please uninstall the printer then: uninstalling the printer software
  2. Restart the computer
  3. Reinstall the printer from the download: HP Photosmart Wireless e-All-in-one printer - B110a Driver download

  Let me know if that solves the problem

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• error message ' Add printer. Connect to the printer. Windows cannot connect to the printer. Operation failed with error 0x0000007e"___Any ideas?

  trying to access a lexmark printer installed on xp based computer from a laptop running windows7 via a local network.  Although the network is configured correctly, when I run the Windows printer installation I get an error message ' Add printer.  Connect to the printer.  Windows cannot connect to the printer. Operation failed with error 0x0000007e"I just upgraded to Vista by using the upgrade Acer and had the problems that Windows tried to download the drivers from Lexmark-, but could not. [the same lexmark printer and the configuration worked without any problems before the upgrade on this combination of machines running vista and xp].

  I had a similar problem when I tried to connect to an hp printer that used a Vista driver. Could do this test? Download Windows 7 driver from Lexmark, install it, and then try to connect to the printer again. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com