Desktop computer does not pick up my second monitor

Similar Questions

• Desktop computer does not load after restart

  After a reboot on my Mac, the CC desktop application does not start even if I open the individual applications in the application. can anyone help?

  Please try this:

  (1) uninstall the Adobe Creative Cloud Desktop App (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)

  (2) restart the machine.

  (3) install the latest version of the Adobe Creative Cloud Desktop App from this link: CC help | Creative cloud desktop

  Guinot

• Desktop computer does not turn on

  My office 24 "2009 does not illuminate. I press the button and the chime start but then the computer shuts down.

  The OS is Yosemite.

  Thanks for your help.

  What happens when you follow the steps in the If your Mac will not turn on - Apple Support?

• My Acer desktop computer does not boot, the operating system is Vista Home Edition

  It says Startup Repair is checking your system for problems.  If problems are found Startup Repair will be correct automatically.  Then he will say: the Startup Repair cannot repair this computer automatically. Send information about this problem

  And then he said access to retrieve options log in as an administrator.  I forgot the password of administrator or local user

  Hello

  Microsoft prohibits any aid granted for passwords forgotten here.

  If you have forgotten your password, how can I connect normally to use your desktop computer?

  Are you sure that this request for password is not not to do with the Acer recovery process?

  You can read this information:

  "Some Acer models have a default password that you use to start the process of recovery from the recovery Partition 'hidden'.

  Usually press you Alt + F10 at startup to start the process of relocation and Acer default password should be 6 zeros, unless someone has changed.

  If not, give Acer a phone call. »

  See you soon.

• Desktop computer does not load correctly

  We can no longer switch uses profiles without having to reprocess the computer because the Office does not load correctly.  When we switch between profiles of uses without reformulate the computer, we get an error message indicating that "your office is not load correctly... loaded in safe mode.

  This start happening a few weeks ago.  This problem occurs every time that we move from user profiles or log out, and then move the user profiles.  We have to reprocess the computer on the desk in order to load successfully.

  All that we can do to fix this?

  If this problem was not more than 15 days ago, and if you remember the date when you did not have this problem, please do a system restore. Choose the date when there was no problem that your restore date.
  If this does not work, please do a check of the filesystem (sfc/scannow)

  Procedures for system restore:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done

  File system (sfc/scannow) check how to:
  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click on Run As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  t-4-2

• Desktop computer does not display the computers on the network after waking from sleep.

  Both computers work on Vista Home Basic. Problem started after computers, the router and a DSL modem has been turned off and unplugged. After the awakening of the day before, the Office would display only the router and the laptop, but the way that he could not establish. Initially, a reboot of the desktop computer has solved the problem.

  Reset and re-installed the router. The three elements of the network were visible after the start, but IE 8 soon at the opening of the homepage. Again, after "standby" mode, only the router and the laptop displayed.

  After additional restart, only the router is displayed. The laptop shows all three elements and accessing office files.

  Suggestions?
  Mike

  Hi Syed,

  I did a full reset/reinstall the router, carefully following the manufacturer's instructions. Both computers are displayed in each of their respective lists of network, even after waking up from sleep mode.

  This issue is resolved.

  Thank you

  Mike

• Vostro 200 desktop computer does not start

  Hi all, our company has an old desk, Vostro 200, which works very well for a few years.  A day after the cleaning, the machine does not start with the amber light.  Fans stop, even the power supply fan stops.

  I tried:

  1. using a different power supply, it's the same thing.

  2. using another CPU, it's the same thing.

  After I unplug power 4 pin for the processor, fans start working and it seems normal but show nothing.

  I also tried out the case from the jury and put it back, in order to avoid any shortened with the case.  It does not work.

  What is the failure of the motherboard? I had a copper shortcut or circuit on the map?

  Although it is an old computer, but we do not produce a bin with other parts in good condition.

  Thank you.

  One last thing is the license Windows XP OEM's sucks it as well as the motherboard has failed because the license is listed in the BIOS?  Thank you.

  CECTT

  Thanks Bev

  1. After spending the Green and black cables, the situation is the same: the fans stop with power of CPU 4 pin; fans of work without power CPU 4 pin.

  2. after disconnecting devices PCI/video /, the situation is the same, still no beep.

  3. after remove the memory, the situation is the same.

  After checking the CPU socket, I put that there could be some not vertical pegs.  Is it possible that I folded a few pins so that it didn't?

  Thank you

  CECTT

  Yes, it is possible, the processor installed correctly, for more information, go to pages 152 to 155 of the owner's manual, if the LGA 775 is damaged, this may require a motherboard replacement.

  https://www.Amazon.com/Dell-motherboard-Inspiron-systems-compatible/DP/B003CO0WQS

  The Vostro 200 was built with two different systemboards.

  Motherboards should have engraved on it model number.

  If she says G33M02, then it only supports Core 2 Duo processors.

  If it says G33M03 then it supports Core 2 Duo and Core 2 quad cores processors.

  What are the OEM sSpec numbers and processor that was installed as a replacement?

  http://www.Intel.com/content/www/us/en/support/processors/000005554.html

  Have you tried to reinstall the original OEM processor?

  In addition, the procedure is usually to Flash the BIOS to the latest version, before the upgrade of the Vostro 200 processor.

  Bev.

• My Win 7 64 bit desktop computer does not recognize my iPad 2

  I checked Device Manager and it shows a yellow "!", when I chose to upgrade, he says he is up to date and yet it still shows the yellow "!", and it does not recognize the iPad.
  I googled around and couldn't find a place to download an update.

  You need to download AND INSTALL ITUNES will install the drivers for it.

  http://www.Apple.com/iTunes/download/

• portable computer does not support. Yet battery monitor says "plugged in, not support.» What are some options?

  my laptop is connected, and yet power monitor says "plugged in, does not support." What are some solutions?

  Hi Joseph,.

  Something similar just happened to me. The first time they fixed it, they have replaced the adapter and the problem is solved. 5 months later it started to happen again and this time they replaced the battery, the motherboard and the milling table (thanks to heaven, it is still under warranty). Fortunately, thanks to the new adapters, battery started to load and the experience does not seem to damage it in any way (but you should keep your eyes on it anyway just in case).

  How they were able to say on my laptop - a Dell E1705 (other than just experience and common sense) was to go into the BIOS (starts, it should be a brief Flash on the screen telling you how to enter the BIOS setup or menu of the BIOS (usually F2) and check the battery information. He showed that the power adapter 'unidentified' instead "90W" list which should be when it is working properly and that the battery was not complete and not charging well plugged. They changed the motherboard and the roll the second time because it could also cause the adapter is not being recognized by the battery (or battery not not recognize the adapter).

  The beep is caused by power and its configured settings to warn you of a low and critical battery condition. In a normal situation, the computer will work right next to the power adapter and does not the battery (it is a way to help maintain the battery life is to run periodically and refill if we leave normally plugged in most of the time). If you remove the batttery entirely, the laptop will power? If this isn't the case, it is certainly at least the adapter or the motherboard. Eventually the battery will get if low, that he's going to sleep or hibernation, or the system stops (you should shut down normally before him to cold shutdown like that). If If, then I expect the tone to go further because it will detect is no longer a low battery charge, because there is no battery - but then you'll want to be sure to use either a battery backup UPS, or at least a surge protector otherwise already in place because if you lose the laptop battery will crash hard and this is not good for her.

  I'm using 32 bit Vista Business SP2 and in Control Panel / sounds / Sounds there is an option for low battery alert. The default to have this. In this case, you can turn off to avoid the beep. In addition, you can go into Control Panel / Power Options, click the plan settings and click on battery. It will provide you with levels of low battery and critical battery and you provide measures to be taken in such a case. If you are unable to operate the system without battery and it is so weak that the alerts began, you probably fell to 11-5% remaining. You can adjust actions to nothing for bass and stop to criticism that 5% is about as close as you want to get to the point where you can hang. Then, you just need to wait until it is repaired and the appropriate parts are replaced.

  Even if you have still some life in it, it is best to contact the manufacturer (they the some have the right parts) or a computer of reputable workshop to get a good diagnosis (perhaps by phone at first), a determination of what must be fixed, the applicable fees, schedule, if it is still under any kind of warranty , and what needs to be done in which order of repair. They can find the adapter is OK and it is just the battery (or vice-versa or two or more). But that's essentially where you need start.

  I hope this helps.

  Good luck!

• my hp touch screen desktop computer does not connect to internet

  I'm having a problem with getting my computer wifi hp pavilion all-in-one Office work. It won't let me connect to the internet, but a few days ago it was working fine. I know that I get internet because I use my Tablet right now to write this message, and I use the internet on my ps3 and Xbox 360. I tried to reset the router and disconnect it from the wireless network on my desktop then back to zero, but those who did not. I even uninstalled the updates I had installed because it was the last thing I could do before it's Wi - Fi no longer works, but that didn't work either. Please, someone help me solve this problem. I use Windows 8.1, is a 64-bit operating system, and the product number is H5P61AA.

  Thank you very much. I could solve the problem when I was checking on the news you want. When I was checking to see if I had a firewall on, I came across a page that said I had to go to the control panel. While there, I found a troubleshooting guide for network access. I ran that, and he said: ' the device or resource (www.Microsoft.com) is not configured to accept connections on port "The World Wide Web (HTTP) Service".» "When I saw this, I Googled what it meant, and he leads to a page that gave me the idea to try to reopen the internet. This is when I was careful with the expression "the proxy server is not responding." Then I googled how to fix the proxy server. I followed the steps to open the tools then internet options. From there I went on connections, then LAN settings and I unchecked the box «use a proxy server for your LAN...» "& I ticked the box that follows,"automatically detect settings ". Then it worked! So I guess I could MacGyver it later to your questions.

  Thank you.

• Desktop computer does not recognize any material (hard drive, cd/dvd-rom)

  Hi, have no idea if anyone can help me out here; but my computer is upward; at first, I thought it was the hard drive, but after further investigation, I noticed in the configuration menu of the BIOS that none of my records are to be noticed; I then went into the "boot" and then into "boot device priority" to see if I can put in my recovery cd so that I can just start there and it gives me a list of boot devices... 1st; 2nd; 3rd; 4. a group disk Boot Priority "NOT INSTALLED" list and it says 'NOT INSTALLED' for all of them... it is a dead motherboard?  I don' t want to go geek team and ask them to charge me 70 males just to tell me that.  I prefer to get all my stuff on the hard drive and hope I can find someone who can fix this... any advice would be really appreciated!

  Thank you!

  And another Wicks dust.

  http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716?JumpID=reg_R1002_USEN

  Here is a partial list of well-known afflicted models:

  e9140f p5210y p6130y p6142p p6210y p6310y p6320y a4316f

  p6157c p6214c a6720y m8530f m9517c m9350f m9530f m9120y

  m9840sc p6214y

• Desktop computer does not meet the entry on PCoIP

  I saw configuration for testing, and everything seems to work except when I try to connect to the virtual machines using PCoIP.  Microsoft RDP works very well, resizes the appropriate office, etc.  Trying to connect through PCoIP results in the next login page, but it will not accept any interaction through the client view.  Another strange thing is that the login page is with windows and does all of the same screen in full screen is enabled.  Here's how things are configured:

  -5 workstations running on Win XP x 64 SP2 (see agent installed on each workstation)

  -Desktop computers are part of a pool of manual, no persistent

  -View connection server is a Server 2003 x 32 R2 SP2 VM

  -View Composer is installed in vCenter (4u1 (v)

  -All virtual machines are running on top of ESX 4u1

  I tried to connect with PCoIP from several different computers (Windows 7, XP) and all have the same question.  Any ideas on what could happen?

  Sorry, Windows XP 64-bit is not supported at this time. The versions of operating system is listed in the available.

  Best regards

  Linjo

  If you find this information useful, please give points to "correct" or "useful".

• After you install Internet Explorer 9 (Beta) desktop computer does not display a date on the calendar

  Original title: after the installation of the Board explorer9 will not display calendar date

  tried to re install calendar but still no date display

  Hey flatcoat4247,

  O are you talking about the gadget?

  O also, do you mean to say the version of Internet Explorer 9 (Beta)?

  This behavior is most often observed if the XML registration is missing in the system. To resolve this issue, follow these steps:

  a. close Windows Sidebar. To do this, right-click on the Sidebar icon in the Notification area, and then click exit.

  b. open an elevated command prompt window.

  To do:

  i. click on Start > all programs.

  II. click Accessories.

  III. right click on invite and then click run as administrator.

  c. in the command prompt window, type the following command and press ENTER:

  regsvr32 msxml3.dll

  Similarly, run these commands:

  regsvr32 scrrun.dll

  regsvr32 jscript.dll

  If the registration was successful, you will see the message DllRegisterServer in succeeded to for each executed command.

  d. open Windows Sidebar (sidebar.exe) and check if the problem is resolved.

  See if it works.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP EliteBook 8440p does not connect to the external monitor using VGA! Help!

  As you can read by the title, this computer does not connect to an external monitor using VGA.

  It will be not just to record all monitors in the control panel.

  Can I change the resolution, change the color, etc.. But it will pick up any display.

  -This computer has a HDMI port.

  -The Windows key and pressing P make the ring of little blue loading appear for a microsecond before nothing appears.

  -VGA cable is brand new, double male, directly connected to my Panasonic Viera 32 ''.

  -In the properties of this computer is giving an error code that this computer has no drivers. (Code 28)

  After a repair, he says "device Base system has not a pilot.

  Can someone direct me to the corresponding pages for drivers or instructions? Any help would be appreciated.

  There is probably a combination of keys specific to your model that enables / disables the VGA port on and outside.  Look in high ranking a key with a marking saucy that some how is supposed to look like a monitor.

• HP 20-r013w: computer does not start if a memory card is inserted in the second take of DDR3 SODIMM 204 pins

  My computer has 4 GB of RAM installed, but in the manual said I could upgrade to 8 GB. There are two jacks for memory cards for this model. When I checked there is a memory card of 4 GB installed in one of the (black color) and the second (white) were empty. So, I bought a second card 4 GB memory: 4 GB Crucial single DDR3 1600 MT/s (PC3-12800) CL11 SODIMM 204 pins 1.35V/1.5V Notebook Memory Module CT51264BF160B that has the required parameters. Today I received the card and tried to place it in the second take (white) and then the computer does not restart. The same thing happens if the original of the memory card is inserted into the white Jack. There is no sound when I tried to launch the screen of the computer in black only. At the same time, both cards operate perfectly if located to the black Terminal. Is there something wrong with the second take, or should I do something before placing a card inside. Thank you!

  I'm sorry I did not solve your problem.  To my knowledge there is no setting that can be changed to allow the second slot working correctly.  As the computer is still under warranty, I suggest contacting the seller for help.  They should help you to solve the problem.