Desktop computer may not hibernate or sleep

Similar Questions

• Desktop computer won't go to sleep.

  My Vista desktop going on not in mode 'sleep'. Blanks the screen and then turns back on.  I did a powercfg-lastwake and got the number 0 and the response,

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658
  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my computer would not wake from sleep when the cover iclose & open again?

  When I close the lid on my computer & open it again, the computer does not wake up, it shows just a black screen!

  Hi George,.

  From the description of the problem, it seems that the computer would not wake from sleep when you close the lid and open it again. I understand the inconvenience.

  Let us, try to perform the following methods and check if it helps.

  Method 1: Run the troubleshooter of power

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 2: Troubleshoot wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  Method 3: Update Chipset drivers

  Download and install the latest version of drivers for chipset for the computer on the computer manufacturer site and check if you are faced with the same question.

  Method 4: Run the BIOS update

  I would say as you perform the update of the BIOS by contacting the manufacturer of the computer, check if it helps.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

• Satellite U500 - may not wake from sleep

  Hi all

  I have a Satellite U500 laptop win7 64 bit and my system may not wake from sleep mode.
  "Standby mode" when I press the power button or any key of the keypad power led lights up but the screen stays black and the system is unusable.

  Any help?

  Have you noticed this problem in the first moments after upgrade to Win7?
  I assume that you made a mistake with Vista?

  Have you noticed the same behavior when you use hibernation mode?

• HP n278tx do not hibernate and sleep in point 8.1 of Windows + impossible to install the chipset Drivers sp63967 &amp; sp63966

  I have HP n278tx laptop and I recently installed Windows OS 8.1 and now I can not hibernate and sleep my knees.

  When I do that it get stuck.

  And also I can't install drivers chipset provided by HP to Win 8.1 Pro.

  I can not install these 2 drivers. Please help me.

  

  You are the very welcome.

  The reason why you can not put the laptop to sleep or into hibernation is because you need to install the NVidia graphics driver too what this hardware ID.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-133679-1&cc=us&DLC=en&LC=en&OS=4158&product=6967644&sw_lang=

  I don't understand why it not install this driver.

  The only other suggestion I can offer is to see if Windows Update installs the driver.

  Go through the manual steps that above, but this time be connected to the internet, then select the method of automatic update .

  See if windows update detects and installs the Intel Management Engine driver.

• After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

  After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

  We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

  Can solve you?

  Sorry for my English.

  Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

• lost all the desktop icons may not everything back up

  lost all the desktop icons may not everything back up

  cannot right click on desktop

  lost in the menu administration tools

  The following article might be worth a visit:

  Hide the desktop icons in Windows XP
  http://www.XP-tips.com/hide-desktop-icons.html

• trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea?

  trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea? I got a microsoft tec tring to understand with a bit of luck again!

  Hello

  in this case, contact the HP support

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us

  or HP Support forums

  http://h30434.www3.HP.com/

  or repost in the correct forum for windows 7 that I have already advised you to do

• Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

  Hello world

  I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
  I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

  I would be very grateful if you could help me

  Hello

  I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the results. We will be happy to help you further.

• Desktop computer does not display the computers on the network after waking from sleep.

  Both computers work on Vista Home Basic. Problem started after computers, the router and a DSL modem has been turned off and unplugged. After the awakening of the day before, the Office would display only the router and the laptop, but the way that he could not establish. Initially, a reboot of the desktop computer has solved the problem.

  Reset and re-installed the router. The three elements of the network were visible after the start, but IE 8 soon at the opening of the homepage. Again, after "standby" mode, only the router and the laptop displayed.

  After additional restart, only the router is displayed. The laptop shows all three elements and accessing office files.

  Suggestions?
  Mike

  Hi Syed,

  I did a full reset/reinstall the router, carefully following the manufacturer's instructions. Both computers are displayed in each of their respective lists of network, even after waking up from sleep mode.

  This issue is resolved.

  Thank you

  Mike

• Desktop computer do not start; black screen; keyboard does not.

  Ok.  I turned on my desktop computer tonight and all I get is a black screen.  Keyboard does not work either.  Has gone through all the troubleshooting suggestions that I could find online (using my laptop), but nothing works.  I think maybe an automatic update Windows could be the problem.  You have any tips for me on what to try next?

  Hi aljbad1,

  Welcome to Windows Vista answers Forums!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Vista are you using?

  (c) do you receive an error message when you start the system?

  Method 1: You can try to start safe mode and see whethyou can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. Select safe mode and press enter

  Method 2: If you are able to start in safe mode, then you can try to perform a system restore and check if it works very well.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Method 3: you can perform a Startup Repair on your computer using your Vista DVD:

  We will have to perform the Startup Repair, boot from the Vista DVD and get RE Win and choose Startup Repair from the menu.

  1. Insert the installation disc.

  2. restart your computer.

  3. If you are prompted, press any key to start Windows from the installation disc.  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair.

  8. once the Startup Repair tool is completed, restart your computer and check if it works very well.

  Method 4: you can also try a system restore using Vista DVD and check if it works very well.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Insert the installation disc.

  2. restart your computer.

  3. If you are prompted, press any key to start Windows from the installation disc.  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click System Restore.

  8. in the System Restore dialog box, click on choose a different restore pointand then click Next.

  9. in the list of restore points, click a restore point that was created before you began to meet the problem, then Next.

  10. click on Finish

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please visit the below given link:

  Repairs to the system of Windows recovery environment

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Hope this information is useful.
  Let me know if it worked.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion Elite HPE 450 t PC: desktop computer will not be updated for windows 7 64, Microsoft tried without success.

  I have a PC Pavilion Elite HPE 450 t, and a few months ago he ceased to accept automatic updates from Microsoft downloads.

  I tried to use the tools that Microsoft has nothing helped.

  Some time after, my Norton Security software security suite failed and wouldn't charge.  Norton failed to find a solution.  I guess it must do something with the heavy backlog of unloaded updates.

  ? Is it possible to load windows 10 on win 7?

  I got my PC tested for viruses, root kits and it is clean, but updates are still not loading.

  Honestly, I'd appreciate any help that you folk can provide.  Thanks in advance

  Leon R.

  Hi there @LROSZKOW,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have had problems with the updates of Windows and want to know if you can upgrade to Windows 10. I'm happy to help you with this.

  Reading the questions you have described in your current system that you cannot upgrade to Windows 10, using the normal method of free upgrade. Your system should have the option available from a previous update of Windows, as the free update is delivered via Windows update. If you have a Windows 7 or 8.1 product key, then you could do a clean install of Windows 10 and use this key to activate your Windows 10 free documents. Of course, you want to first make a backup of your data.

  Another option would be to try to load the original image from the desktop computer, and then try to update again by using Windows Update. This assumes you have a working recovery partition or recovery media. Computers HP - performing a recovery of system HP (Windows 7)  But to protect your data, you want to make a first backup as I mentioned.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Windows Installer error - hardwaree to the computer may not support booting to this disk.

  I need to reinstall Windows 7 in preparation for upgrade to Windows 10

  I use the Bootcamp Assistant to install Windows 7 and have the following problem.

  1. I partition my SSD 512 drivce, creation of a score of 91 GB for Windows. The partition is created successfully and the MacBook restarts on the Windows Setup disc.

  2, I select my BootCamp (91GB) partition

  3. I then click on "player (Advanced) Option, and then click format.

  4. I then get the following error:

  "Windows cannot be installed to this disk. This computer's hardware may not support booting to

  This disc. Make sure that the drive controller is enabled in the computer's BIOS menu.

  What can I do to solve this problem, so Windows thinks he can boot from this partition?

  Please disconnect all external storage devices, USB hubs and external devices. Run the following two procedures, then try again to BCA.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

• computer does not hibernate on low battery

  Well, I think it's maybe a hard drive problem, but I'm not sure. recently. When the battery is very low like for example 10%, no warning comes up saying that the battery is almost discharged, rather my laptop chips out and he is not setting in Hibernate, or sleep so what that i do who is not saved is lost so these days when the battery is low I plug it and I can continue to work. my laptop is a hp Pavilion 2237nr g6 and he got a very bad fall a year ago but it was working fine until now. Help, please! I also want to know, if I have to replace my hardrive my processor intel core i3 will go with it? Thanks in advance

  Hi AnnaKK,

  It's really hard to explain why, but I will provide you some articles to read. They jist of this comes up to load practices and course usage.

  Lithium-Ion smart battery technology and understanding
  Maintenance of the rechargeable battery as fast as Possible
  Improve the performance of the battery (8, 7, Windows Vista)

  I've only included one last, because it can help to get the most out of your next battery.

  I hope you find this information useful.

• My Acer desktop computer does not boot, the operating system is Vista Home Edition

  It says Startup Repair is checking your system for problems.  If problems are found Startup Repair will be correct automatically.  Then he will say: the Startup Repair cannot repair this computer automatically. Send information about this problem

  And then he said access to retrieve options log in as an administrator.  I forgot the password of administrator or local user

  Hello

  Microsoft prohibits any aid granted for passwords forgotten here.

  If you have forgotten your password, how can I connect normally to use your desktop computer?

  Are you sure that this request for password is not not to do with the Acer recovery process?

  You can read this information:

  "Some Acer models have a default password that you use to start the process of recovery from the recovery Partition 'hidden'.

  Usually press you Alt + F10 at startup to start the process of relocation and Acer default password should be 6 zeros, unless someone has changed.

  If not, give Acer a phone call. »

  See you soon.