Desktop elite mouse does not connect

Similar Questions

• The NSB M250r mouse optical/wireless mouse does not connect

  I use a windows XP computer, I got recently a new mouse for. The receiver installed the software for it, but the mouse does not connect. I turn on the mouse, but no connection is established. I tried all USB ports and still nothing.

  I would only try the mouse settle if you have totally abandoned on the support of people in customer service. If you start to disassemble the mouse, you will probably void any warranty that might come with the unit.

• Pavilion HPE 150 t: I have a desktop Pavilion which does not connect to the internet all of a sudden

  Had two problems.  My AVG was locking up my computer with the function of guard dog.  I was able to get past and get uninstalled AVG.  Now, I can't the computer to connect to the internet.  I've updated the ethernet driver, but it still doesn't work.  Said that there is a problem with the driver.  I used a wireless adapter and it shows as connected but also says there is a problem with the driver.  I disabled all the security settings, that I can find.  Firewall AVG, Windows Defender, real key.  I did the sfc scan now and it found nothing.  He won't let me not reset the pc to restore the pc or anything like that.  I tried to update the BIOS, I think I already have, and he said that it is "denied" see administrator.  When I tried to reset the nsch he says he has been "denied".  I don't know what is blocking the connection.  Internet works anywhere in my house with the exception of this one computer.   Suggestions?

  So, I thought about it.  None of the support stuff helped but thanks for trying.  I'm always up for the Microsoft Security error at startup.  I noticed that I don't have McAfee installed when windows Defender popped up it asked McAfee, I used to have, and I saw where the real key is a McAfee product.  But I always felt that something is blocking the connection.  I ran AVG removal tool again, and once more he showed the AVG protection there.  I completed the deletion. still nothing.  I went to the properties of the ethernet and there I saw a place for the files AVG filter.  I unchecked it and BAM my internet connection was back up.  If not, was not windows.  This file kept loading with the drivers and I seen this every time but never uninstalled.  Once I killed him felt stupid, frustrated and angry.  I was very disappointed with AVG lately.

  Thank you for support for trying to help me, I learned a lot during this mess.

• Sony VGP-BMS30 mouse does not connect with the computer via bluetooth

  Hello

  I can't get my laptop Windows 8 to find the Sony mouse!  I checked and all the settings are correct. Blue tooth is on and wifi etc...  Packing instructions mouse Sony are for Windows XP.  What is the problem?  It is not compatible with windows 8?

  I checked and all the settings are correct. Blue tooth is on and wifi etc...  Packing instructions mouse Sony are for Windows XP.  What is the problem?  It is not compatible with windows 8?

  It's an idea.  A few months ago I downloaded Broadcom.com fresh Bluetooth drivers for my laptop Sony VAIO Windows 7 x 64.  Just in case, because I don't use Bluetooth at all so far.   There is a Guide to Broadcom Wireless Bluetooth in my folder Bluetooth in the start menu, maybe you have also.  You could also ask a Sony VAIO support forum, or even to buy the mouse USB cable is cheaper than you can get up to find a solution for your wireless mouse.  No kidding, without cable you'll need a battery.

• My mouse does not work with Windows XP

  I have Windows XP and I changed the disconnected a mouse and pluged the other without in regards to power off of the desktop, the mouse does not move I tried other mouse, nothing, need help, P

  This diagnosis you have done to date?
   
  Error messages?
   
  Please provide details about your current problem.

  We are better able to help you if you help by providing us with as much information as possible...

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• My Explorer Microsoft touch does not connect to the computer (Win 8 and 7 or iMac)

  I bought a touch of Explorer Microsoft wireless mouse and cannot understand why the mouse does not connect. The small usb dongle is recognized and the mouse turns works. The optical light is blue and the touch sensor clicks when I run my finger on it. Nothing happens when I press any button of the mouse (without interaction with the computer). It almost seems like its not even connected to the usb dongle. I tried to find out what's wrong with it or with Windows. The mouse itself doesn't simply plug the usb dongle or on the computer at all. It is not a Bluetooth mouse, so there is no button to connect or sync.

  Hello

  As it seems to be a hardware problem, you can check the link for the Microsoft Hardware supported:

  http://www.Microsoft.com/hardware/en-in/support

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• my desktop icons does not connect to internet

  my desktop icons does not connect to the internet... the fact, but they do not now

  Hello

  1. the icons on the desktop are you referring?
  2. to which programs are associated with these icons?
  3. you receive an error message?
  4. don't you make changes on the computer before this problem?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• My desktop under Vista Home Premium does not connect to the internet.

  I have an Acer Aspire X 1200 desktop equipped with a NVIDIA NForce network controller. About 1 week ago I was browsing the internet, Norton anti-virus popped up and told me to renew my subscription. Now, I've never had Norton on my computer and when you click Remind Me later, my internet crashed. Now the whenever I plug my ethernet cable in the box, it connects to my router Motorola 5BS101 surfboard, but it does not connect to the Internet. I am running Windows Vista Home Premium. I tried to run malware programs remover, thinking it was a malware, nothing done. I tried to run to remove virus and nothing. I tried to change the IP address to my my laptop was broadcasting, because the internet runs on it, but no results. When using the command prompt to find out what the problem is, it says the active IP routing: routing WINS unactivated: No. looking at the stats of network adapters, it says active DHCP: No. address IPv6 local link: fe80::15f9:58e2:c2d8:66e7 10%
  Autoconfiguration IPv4: 169.254.102.231. Also using ipconfig / renew, said the message DHCP is not enabled.

  Are you sure you never had a Norton trial subscription on your computer?

  Norton will do strange things.

  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  Try to use the Norton removal tool.

  The computer you are using now if you have an Internet connection with the other > download / save > copy to Flash Drive > transfer / install it and launch it on the other computer.

  See you soon.

  Mick Murphy - Microsoft partner

• Mouse Microsoft Desktop 2000 Wireless does not

  HIII,

  I bought Microsoft Desktop wireless 2000 a week back. My mouse does not work. I inserted new batteries too. Only, I get the blue light to return.

  Please help me soon. Thank you.

  Hi Vincent,.

  Please answer the question to help me better understand the issue:

  Have you checked the device helps with the other computer?

  This problem may be due to the road device or another conflict/applications of devices. Run the hardware and devices Troubleshooter and check if it helps fix the problem.

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists, go to the following link and check if that helps.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard.

  http://support.Microsoft.com/kb/838398/en-us

  Please let us know if you need assistance.

• Wireless mouse does not work after update Vista graphics driver

  Hey whats goin' I'm looking for a little help here Irecently downloaded a new graphics driver on my laptop and rebooted... suddenly all OOF, mouse not working anymore... What do I do?

  * original title - my wireless mouse died after I downloaded a driver what should I do? *

  Hello

  The video driver may be accessory to the mouse does not.

  Reboot again. If the mouse still does not work, check the batteries in the mouse and receiver
  connection. To the need to update or reinstall the mouse drivers - check with Microsoft Hardware, LogiTech
  or anything done to the mouse for the latest drivers.

  ==================================================================

  If this seems to be a USB problem AFTER the foregoing:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Do right click on the mouse does not.

  Bought a new computer with windows 7 pre-installed touchscreen and the latest internet explore. The "right-click" wireless mouse doesn't work at all on the desktop or start menu Explorer etc. Is - this mouse does not, or something else. I connected a wired mouse and the same problem.

  Thanks for your reply. Turns out to be a faulty mouse. Changed for the wired world is fine.

  Thanks again
  siltmanstewart.

• App-Manager does not connect to the Simulator OS Firefox on Windows 7

  OS: Windows 7

  Firefox: 28

  6.0pre8.20140112 Simulator 1.2 Firefox OS

  When I run the simulator it opens fine and I see a Firefox OS Desktop
  But the App Manager does not connect. The console at the bottom right says:

  .. localhost:56455 options (the port varies)

  .. connection timeout. Possible causes: has not clicked 'accept' (guest).

  .. .disconnecting

  .. .disconnected

  I have disabled my firewall, restarted firefox and even system - did not help
  There is a similar bug - but I don't know if we are talking about the same thing:
  https://support.Mozilla.org/en-us/questions/988385

  Thank you

  Well - I already knew these links and I can't find anything useful
  Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
  This one works very well

• Thunderbird does not connect to the server after update to 24.4. How can I fix it?

  TBird updated today V24.4 on my desktop and now it does not connect to the server. I have V23.4 on my lap top and it works fine. Someone at - he had this problem and figured out how to fix it?

  Please check your anti-virus software.
  He may have detected a change and decided to not allow Thunderbird. He could therefore block Thunderbird.

• Why is my Apple - Super Drive CD does not connect to my iMac?

  Why is my Apple - Super Drive CD does not connect to my iMac?  That was before I upgraded to el Capitan.  Now it will not allow CD insertion and the icon does not appear on my desktop.  However, the device is displayed in the Finder and seems to rest for more than 15 minutes, try to connect.  Any advise appreciated.

  try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support