Desktop HP Envy 700-305no: SSD Installation Guide

Similar Questions

• Desktop HP ENVY 700: problems with the boot from usb in the bios

  Hi I'm trying to boot from usb on a desktop HP ENVY 700. I don't know the serial number now.

  I followed the instructions and have produced a bootable USB and I checked this on a work dell computer where there is an option for me to boot from my USB if I so wish, but on my HP ENVY any options choose it does not appear with my USB in question and when I try to change the boot sequence making sure the usb/floppy and drive hard usb is above the rest of the sequencers starting it always starts just to the top as usual to my windows boot 10. I've disabled secure boot and used the boot of the legacy and it still does not work.

  I went through all the options I can that seem to be logic and it just does not work. I don't understand and I have to start using a usb key that I use the operating system can be very dangerous in a real environment, so it can not be downloaded to the hard drive.

  I need immediate help, this becomes quite frustrating now that it should be simple to do, but HP is not the way to simplisitic to do.

  Please if someone could point me in the right direction I would be so appreciative ideally if I could have a ride on the way to do

  I need this to work because I can't afford to buy new systems and its for my studies so its imperative

  Your PC has a motherboard of Memphis and happens to have a UEFI BIOS and the hard drive of the GPT format.

  You can check the type of hard disk online order volume by using the DiskPart utility.

  

  Create a flashdrive bootable UEFI with RUFUS.

  https://Rufus.AKEO.IE/

  Plug it into an available usb port before you press the power button. Near the powr button and immediately start to tap the F9 key to enter the boot from the sources menu. Select the Flash drive under the UEFI Boot sources. Let the boot process. If you have created the key correctly, it should start.

• HP Envy 700-430qe PC: Installation of SSD

  I just bought a HP Envy 700-430qe PC and want to install a new 256GB Solid State drive.
  (1) can I just use the factory reset HP recovery option to install OEM Windows 8.1 on this operating system? Since the splash screen?
  (2) otherwise, what happens if I first install Windows 7 on SSD? I could then use the HP factory reset to clean install Windows 8.1? From the desktop?
  (3) or could you point me to a tutorial on installing a SSD using the OEM 8.1 operating system?

  Apparently, many people have this issue, but I can't find an answer with a reliable consensus.

  Hello

  You can use the external HP recovery media to install a new factory on the SSD system. It is the recommended approach.  Just follow the posted HP recovery procedures.  These extra HP posted articles will also be beneficial.  Read these articles before beginning the process.  Maybe twice would be wise.

• HP ENVY 700-305no desktop PC: Bios update failure.

  Long story short (a little).

  I got a virus, is a virus really means, crypt all my files, prevents the opening of antivirus programs and redirects the downloads.

  virus survives 3 reset factory, 3 hard drive formats, and a reinstall of Windows.

  This leads me to believe that he himself got into the Bios of my computer.

  so I downloaded the latest bios for my system, in this case

  Update the BIOS HP consumer desktop PC (SSID family ROM 2AF3)

  through the Setup program on another computer, I installed the update to the bios of my USB,

  inserted in my main pc, held down the Windows and key B, while starting my computer.

  This led beeps and my computer Wrooms, 10 minutes later, nothing happened.

  I decided to start the installer directly from inside infected computer, but this resulted in a failure too.

  say that the downloaded bios is not compatible.

  What I'm asking is how I should go about the removal of the old bios (possibly) infected and reinstall it again.

  I'm not aware of a way to Flash the BIOS in Ubuntu, but it might be possible if there is a wine app in the version you have.  I have not experienced or read where someone else tried it either.  You could ask for more in the Ubuntu forums.  Don't know if it is possible to WIN PE 3.0 either.

• TouchSmart HP Envy 15-j020eb: SSD installation?

  Hello

  I am looking for a new laptop and the Touchsmart from HP Envy 15-j020eb looks like the best buy for me, except there is no SSD... Is it possible to build in an SSD (ssd or msata ssd)?

  Kind regards

  Hello

  Thank you very much for the help. I think I'll ask a friend who works as IT'er to help me, it seems easy for me...

  Kind regards

• HP Envy 15-j118so SSD installation will void the warranty?

  Hello!

  My friend has need of a new laptop computer and wants an installed SSD. I thought he could buy the Envy 15-j118so and install an SSD inside.

  The warranty is voided by replacing the hard drive DSS? Some computers can be updated without voiding the warranty, others not.

  Hello:

  Please refer to the FAQ #17 on the link below and that should answer your question.

  http://h40059.www4.HP.com/warranty/information/FAQ.php

• HP ENVY 700-000z Desktop PC with 8 and the need to know if I can install Windows 7

  Just bought HP ENVY 700-000z Desktop PC equipped with 8 and need to know if I can install Windows 7 on this computer without problem.  My work does not allow the use of Windows 8.  If I can install Windows 7, what version of operating system do I need to buy to do a clean install.

  If I understand correctly, I could order the Windows 8 Pro, who has right to demotion and then install Windows

  7 pro, I have then I should be able to get the drivers, I need HP is correct.

  WARNING *.

  HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You should ENABLE 'Secure Boot' and maybe 'Legacy Support' in the 'BIOS Setup boot secured' on the settings page below, before you try to install Windows 7;

  

  or

  

  In addition, as the hard drive is partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" in the start menu "F9". If "UEFI - CD/DVD drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive.

  Most of the Windows 7 drivers from the drivers of HP Pavilion p7-1299 c desktop PC page should work on your desktop HP ENVY 700 - 000z CTO. Both models use a variant of the motherboard HP Jasmine. If you have missing or unknown devices after installing the drivers, please post the "Hardware ID" Device Manager for devices as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP ENVY 700-030qe: BIOS updates for my HP desktop computer

  I have a desktop HP ENVY 700-030qe with Windows 8. While looking through the updates of software available for my system, I have seen two listed in the BIOS:

  (1) HP Compaq consumer Desktop PC BIOS for ROM family SSID 2AF3 dated October 2014.

  (2) HP Desktop BIOS update system for PC HP ENVY 700/800/810 with 2AF3 family ROM dated May 2014.

  1. How will I know what family of ROM BIOS I have? I have pictures of all the screens of BIOS that I could get and nothing mentioned family BIOS ROM. I still have the BIOS original version KAI 80.07.

  2. the two updates apply to my computer? The wording is confusing. It seems that only the second apply to my system unless one applies to a more general category of the office. If both apply, as the first is the most recent, which would be the one to use?

  3. There is an issued for the BIOS in June security update that I ran across here. Which does not appear in the update list. Why would that not replace the other? Can I assume that the October update would include this security update?

  Thank you

  JohnD

  Hello @jpd_az,

  I read your post about how you're looking to update your system BIOS and what version of the software to install. I'd be happy to help you in this case!

  The version of the BIOS, you want to download and install is 80.23 A, which can be downloaded by clicking on the link below:

  • Update BIOS HP Compaq consumer desktop PC (SSID family ROM 2AF3)

  To update this software, I recommend that you follow the steps described in this document on the updates to the BIOS.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Video capture of the video recorder on HP ENVY 700

  Honestly, I don't know why I write something simple on such a forum.  Used to be that kind of info

  a basic element of the documentation on all THE new products.  But what I find with my new HP ENVY 700-210 is "Troubleshooting" Guide.  I don't have one problem, another that HP doesn't seem to think that it is useful to offer

  Basic instructions terminology to use their computer.

  I have probably 50 hours of library VHS from my past to work as a TV journalist.  Hell, I know how to record videos,

  video editing, TV remote installation, coordinated international TV, stream video production shoots... but simply transfer

  video of my VHS (or TV) drive to my new computer?  Nope.  Discover yourself, my friend.

  Can someone help with this, apparently helpless, Oldtimer?

  PS I remember when my teenager saw reading me an instruction on a new gadget set-up/booklet 10

  There are.  He asked, ' what are you doing, Dad? "  I told him I've "read" on the new equipment.  "No, Dad," said.

  'You're wasing time.  Just start hitting the keys. It will work very well. ' Wow.

  Hello

  You need an application to capture the video stream from a video of input material source.  This Roxio product should work.  If your PC has Cyberlink products then you will maybe upgrade the software and get a capture device similar to the capture of Roxio hardware.

• HP Envy 700-147c: video and audio editing

  I have a desktop HP Envy 700 - 147c with Radeon HD 8670 D video card. When I'm editing video or sound, bogs, slowing and sometimes even crashes my software. I have a HP w2207h monitor. I have two questions.

  (1) is there a more powerful video card that I can just pop to replace the current card?

  (2) should I buy a new desktop computer, and if so, what would you recommend for audio and video editing?

  Thank you!

  Shawn Rosvold

  rosweed_1 wrote:
  

  I have a desktop HP Envy 700 - 147c with Radeon HD 8670 D video card. When I'm editing video or sound, bogs, slowing and sometimes even crashes my software. I have a HP w2207h monitor. I have two questions.

  (1) is there a more powerful video card that I can just pop to replace the current card?  The first thing you should do is upgrade the power supply (PSU).  The current PSU is only 300W.  Most newer cards require a minimum is 400W to work properly.  I recommend at least 500W to give you extra power for peak needs.  I love Corsair products.  As for a video card, here's a card which should give you more power.  I suggest you read the reviews to see what users have to say about it.

  (2) should I buy a new desktop computer, and if so, what would you recommend for audio and video editing?  If you decide to buy a new computer, the new gaming PC are great.  Here are a few examples.  One of them as displayed will be much more powerful than your existing computer.  You can configure all that you need.

  Thank you!

  Shawn Rosvold

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Envy (700-420nx): HP Envy 700-420nx Ethernet (network driver) for Windows Server 2012

  I recently converted my desktop (HP Envy 700-420nx) in a server machine PC, running Windows Server 2012. But unfortunately the network stopped working. Then I installed the network (Realtalk) for windows 8.1 driver. But the problems still exist as it is. Says "No correct IP configuration" after an auto repair, "United Nations identified network" on the list of the networks.

  This is why I would like to download the specific driver for Windows server 2012 or any other possible solution to this matter is appreciated.

  Thank you

  Hello:

  See if the driver directly from Realtek works... DL and install the 3rd pilot (4th point) on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Guide for the installation of an HP ENVY 700-230qe CTO Desktop TV tuner card

  Hello

  I am trying to install a TV tuner (Hauppauge WinTV-HVR-2250 1213) to my HP ENVY 700-230qe CTO desktop PC. Can you please give me the guide installation and procedure for the TV tuner card? Thank you.

  Here's a guide to help you with the installation of an expansion card or of the video card in the computer.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• Help to install a second hard drive in the HP ENVY 700-230qe CTO desktop PC

  I am installing a Western Digital 1.5 TB internal hard drive (model # WD15EARSSP) to my HP ENVY 700-230qe CTO desktop PC. Can you please give me the instruction menu and the procedure for the second installation of HD? Which cable kind and other supplies do I need to connect the new HD to my PC? SATA cables: right-right, right - left, right-right angle... etc.

  I am not sure that the cables will be available inside the computer.  I suggest you to open the case to see if there is a data cable.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP ENVY 700-230qe CTO desktop PC

  Hello, I want to use 5 TB hard drive as boot drive (C:\) with partition type GPT for Windows 10 x 64 Pro, but provided BIOS does not allow me to load windows on DISK of Type GPT even if I start this desktop in UEFI mode computer.

  Can someone please tell me how to load Windows 10 X 64 Pro type GPT hard drive from zero (New Installation)?  My PC BIOS system is 6/2013 and I don't see any more recent BIOS with the necessary fix...!

  Thank you

  Gregory

  Hello Riddle,

  Thank you very much for your prompt and quick response here.  Sorry for reply late bit by me.

  Here what I did to resolve this unique problem of landmines.  After spending hours searching online, finally, I've been succssful for windows 5 TB GPT HD 10

  (1) started the desktop computer HP Envy 700-230qe CTO in Legacy BIOS and 5 to as MBR format (only 2 TB has been recognized in the MBR, FYI)... and loaded Windows Pro x 64 using Windows DVD 10 (under Legacy BIOS, I was able to get the key USB and USB CD/DVD bootable options, which are not there to Boot UEFI.)

  (2) after successful installation of Windows 10, I used AMOEI Partition Wizard and converted my HD MBR of HD Type GPT, and fortunately I have is not losing any data system or windows and then shut down the PC

  (3) changed Legacy UEFI BIOS, restarted the PC and luckinly this time, converted GPT HD recognized with WIndows installed 10, and PC has started after a few minutes of setting.

  (4) once, I was in environment WIndows 10, I was able to use the rest 3 TB of space as another partition I formatted using Standard Windows disk management.  Am so happy that I could find practical solution so that I am able to use fully 5 TB with Secure Boot to increase the security of my PC.

  Thank you

  Piqueras

• HP ENVY 700-330qe CTO desktop: HP has encountered an error when trying to analyze your product

  When I connect to HP support, correctly identifies my PC (HP Envy 700-330qe CTO Desktop), but trying to find the recommendations of the exceptional software, I get a message "HP has encountered an error when trying to analyze your product".

  It was working before and I used it to identify and install a number of revisions of software in circulation.

  Subsequently, he developed the above error. Is this just an artifact because I have all of the pending software elements recommended to install?

  Hi there @Scotsman101,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with a sweep to get recommendations for the software HP Support site. I'm happy to help you with this.

  It is possible that it was a small problem because there are updates on the forums and other parts of the website last week. It still happens?

  An alternative to this method is the HP Support Assistant, which includes several other tools. Please see the following pages where you can find the software and instructions on how to use it.

  HP Support Assistant
  HP computers - using HP Support Assistant (Windows 10, 8, 7)
  HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.