Desktop Pavilion: Identification of the usb ports 3/2 on HP desktop computer

Similar Questions

• Insert the cd into the computer, nothing happens. even with the USB key into the usb port. How to make a computer to recognize.

  When the cd is put into the computer, drive works but nothing appears in the desktop and nothing happens when I insert the USB into usb port.  (Can access both by going to 'my computer'.

  Hello VinceBurkis, this thread has been created in the forum Desktop and personalization; the moderation of Microsoft team has moved this thread to the hardware and drivers Forum.

• USB key into the USB port does not appear in 'my computer '.

  Original title:-drive Flash USB port does not appear

  I have laptop Dell A 4 years and cannot use USB ports. My data flash drive lights flash but nothing shows up in 'MY Computer'

  It turns out that there is a problem connecting to the motherboard... so it ' s not worth repair. However, I believe that I can connect to the Internet by the yellow cable supplied with the router. There is also a card I can buy known as PCMIA card that will give me 2 additional USB ports. It's cheap enough to give it a try.
  Once more a big thank you to all those who have offered their advice on this matter. I'm amazed that so many people are willing to give of their time to help a novice

  Terry

• This will work if I plug it into the USB Port of a desktop with Windows 7 HP?

  I had the hard drive of my worn desk w / Vista HP layout box HD Startech. This will work if I plug it into the USB Port of a desktop with Windows 7 HP?

  Hello
  Yes it will work. You can access files on the hard drive but not the Oprating system hard disk previous. The previous hard drive can be used as hard drive.

  I hope this helps.

• Pavilion g7 - 1117cl: lost usb port in the laptop

  My wife tried to update to Windows 10.

  He has totally failed and 'lost' the drivers for the USB ports so that she cannot use her mouse.

  We spent MANY hours on the phone with Microsoft as they took control of the laptop and tried to fix it.

  Finally they told us that they believe there is some sort of virus on the disk, they can not delete? and that the laptop should have something on the 'partition' on the disk.

  They were not very clear about this, but he told us to contact HP.

  Our warranty has expired.

  Given this, if I do an original factory reset this will fix the problem or a virus caused a wrong to prevent a resumption of this way?

  Microsoft seems to think that a reset would not fix the problem.

  The laptop came with all the discs.

  We are NOT any sort of expert on computers, so we do not understand much of what they told us and we had problems to understand the accent of the person who was working on the issue.

  @Dfaris,

  Thanks for posting back.  Yes at this point, you will need perform a recovery of the plant on the laptop.  He's going to wipe the drive clean of any possible bad guys and set it back to the original configuration.

  Here is the link to help you with that.

  HP computers - performing a recovery of system HP (Windows 7)

  Thanks again for the post and have a great day.

• 700 - 060ea Office: stop the usb ports go to sleep when the rest of the PC

  When I get my laptop connected via usb, the system constantly charge the phone when the pc is asleep. Have you tried to uncheck "allow the computer to turn off this device to save power" in the Control Panel/Device Manager/USB controllers/Properties tab, but the ports still off. I saw my present mobile on this hub have obtained the correct material. I would have preferred that the PC continues to sleep when it is inactive, but want the mobile to continue loading.

  Should I change something in the BIOS maybe? If so, how can I access BIOS for this model?

  Thank you in advance.

  Hello @tomsy,

  I read your post on how the USB ports on your computer constantly power when the rest of your system enters mode 'sleep', and you need to avoid this. I'd be happy to help you in this case!

  In order to maintain your USB ports power while your computer sleeps, your office should be equipped with a High Powered USB port. It also allows to load when your office is completely turned off.

  According to the Specifications of the product from your desktop, High Powered USB is not available on your system.

  I hope this helps!

  Best regards

• Pavilion 15 n-246se: usb port 3 for hp Pavilion 15 n-246se

  I have hp pavilion 15 n-246se and I tried hard to set the usb port 3, but I can't... it worked before, but now it no longer works

  Thanks in advance

  Hi @sohaibadel,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-n246se and problems with USB 3.0 does not properly. First of all, you need to remove all USB devices.

  In Device Manager uninstall everything that is listed in the USB devices. Restart the computer after the uninstall, it must be reinstalled automatically. Then put in the USB devices and it should update all drivers.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may need updating.

  I would like to know how this happens.

  Thank you.

• ProDesk 600 MT: all the usb port disabled after startup Win7

  Hello world

  I just brought a few ProDesk 600 MT after that the installation operating system, one of them seems locked all the usb port after the boot of win7.

  Can I use keyboard and mouse during startup, including the bios or windows safe mode selection menu. However, once started to win7, all usb port are disabled, not even power supply. Which means no keyboard, no mouse. I can't do anything else until the eve of the computer by push and hold button / stop.

  Anyone know why and how to solve this problem?

  Thank you

  Alan

  Hi, Alan:

  See if the news on the thread below solves the problem, if your PC is chipset Skylake.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/can-not-install-Windows-7-on-new-600-G2/m-p/5822964/highlight/true#M130817

• BlackBerry Torch 9860 smartphones does not connect with the pc via the USB port.

  We have a new Torch 9860 which does not connect with a PC via the USB port.  What should do?

  SlaKir wrote:

  The answer is YES

  Well, then your USB port is likely.

  Restart the PC and BlackBerry (with smart BlackBerry power onthe phone, remove the battery for a minute and then reinsert the battery to restart).

  Then, connect with the USB cable and a rear main USB port at the back of the PC, not a front USB port.

  Hear a ringing or sound from the PC indicating that the BlackBerry is connected?

  Start the BlackBerry Desktop Manager software. Give it a minute to recognize the connected BlackBerry device... you see the code PIN of BlackBerry on the PC in the BlackBerry Desktop software?

• The Device Manager on my Windows box lists a hub USB 3.0 as one of USB controllers. This means that one or more of the USB ports are capable of 3.0?

  I recently bought a backup disk says he would run faster is it my 3.0 instead of 2.0 USB ports.

  Just try to understand the computer itself, if one of the 8 USB ports on my desktop Dell (Windows 7, 64-bit box) is capable of USB 3.0.

  Hi John,.

  The message that Windows gives is Windows telling you put a USB 3.0 device in a USB 2.0 slot and the speeds will be Cap using USB 2.0 footrest.

  If you are looking for your system on the website of Glens, it should tell you if one of the USB ports are 3.0 or not.  I think that USB 3.0 is marked with the blue wire around the ports.

• Problem after connecting via the USB port of the printer. Error 0x0000007a

  Recently, I plugged my HP Deskjet2360 printer via the USB port on my HP laptop (running w7 Home premium 32-bit) and can not print at all. When I try to print a test page I get the following message ' operation could not be completed. Error 0x0000007a. Operation failed.

  My usual Setup is to have my printer connected to my desktop (Windows XP Pro). My HP laptop is connected via a wireless connection to my home network, which is also connected to my desktop computer. Of course, this means that I have the office turned on to be able to print from my laptop.

  Everything worked great until I decided I'd rather have my connected printer to directly to my laptop via USB.

  When I connect the printer via the USB port on my laptop, windows installs the software and reported no problems. Yet when I try to print a test page, I get the mentioned error. When I then reconnect the printer to the desktop and try to print a test page to my network, I get exactly the same error message. The office and the printer still work fine, it's just that I can't print from my laptop.

  I uninstalled and reinstalled the printer on my laptop with the USB connection and the network, but it still does not work. The resolution of the problems on the laptop reported no problems, and the printer is set as default printer. I also get an another error msg when I click on the Preferences button in the printer properties: address of the 0x5aeba4f1 function caused a protection fault. (code 0xc0000005 exception) Some or all property pages cannot be displayed.

  
  

  The only way I found to get around this is to use windows restore and restore my laptop before the point when I connected the printer via the usb port.

  Any suggestions?

  Hello
   
  This error 0x0000007A describes the data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
  You can try to uninstall and reinstall printer driver and check if that helps.
   
  Here's how you can do:
   
  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
  2. Select a program and then click on uninstall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-CA/Windows7/remove-unwanted-programs-from-your-computer
   
  After you have uninstalled the driver to restart the computer, this should install it the appropriate drivers for it. You can also try to download the latest driver from the manufacturers website and install it.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1101015&lang=en&cc=us&TaskID=135&prodSeriesId=1101113&prodTypeId=18972
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  Kind regards
  Umesh P - Microsoft Support

• Error "Windows has stopped this device because it has reported problems. (Code 43) "when I try to plug my mouse optical usb into the USB port.

  Original title:

  First here is my card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02479651&cc=ca&dlc=en&lang=en&lc=en&product=4299342 desktop pc
  and my mobo card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=4299342
  (running windows 7 x 64 and not changed all my pc hardware so everything on the Web page is true)

  in any case, when I try to plug my mouse optical usb in the port of e/s (usb port) on the front panel (which supports usb 2.0) a notification pops up saying
  "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. Help to solve this problem, click this message. "
  so I click it and and called up pop-up windows
  "the usb device not recognize."
  display 1 unknown device. Link to the image: http://img38.imageshack.us/img38/3579/usbdevicenotrecognizewi.jpg
  Then I double click on it, next pop up another window called "unknown device properties" and under "device status", he said:
  "Windows has stopped this device because it has reported problems. (Code 43) »
  Link to the image: http://img204.imageshack.us/img204/8597/unknowndeviceproperties.jpg

  Also the same things happen when I plug in usb, keyboard , but not when I plug a flashdrive usb 2.0 without notification or anything pop up.

  Here's what I'm trying to fix it but ended up with saying it was installing the device, installation failed and getting the error failed and unrecognized again...

  • Plug my optical mouse on my other ports and it works perfectly fine (to see if its working)
  • Plug the mouse (in the wrong port), went to Device Manager and uninstall the unknown device, reboot with usb plug in and have the connection to the internet (not decided)
  • Uninstall all devices under USB bus controllers in the Manager device and rebooted with mouse in internet connection (not decided)
  • Went to device manager expanded bus controllers USB right-click on power management all the device label "usb root hub" click and uncheck the box "allow the computer to turn off this device to save power" and reboot (do not set)
  • Open the normal startup in msconfig (system configuration) selected and restarted (did not set)
  • Shut down the computer, disconnect the plug, unplug all the devices connected to all IO ports (usb port specifically) and my desktop pc has left alone for an hour and a half and start it to the top after with everything back plug (mouse in the wrong port) (has not set)

  Note: when the mouse is connected to the usb port it is light on substance, but its does not (not flashing do not and when you move, mouse is frozen on the monitor)

  Hello

  The results highlight the drivers. It is best you contact HP support and get all the latest device drivers.

  http://WWW8.HP.com/ca/en/support-drivers.html

• Why don't Windows (or the Photo app) read more a picture of the USB port?

  Why do Rt Windows reads only one photo at a time a USB plugged into the USB port?  I had imagined that the Photo app would be able to see the drive and move from one photo to another, but it does not work.
  I have tried using Windows Explorer to slect all the pictures, and then click right and select 'open' from the menu.  Only a single open photo.  He need to return several times to explore, click on the following picture, wait until it opens, etc..

  On my desktop PC (a Dell running Windows 7), Windows Photo Viewer will open one and then pass that one to what is provided for in the same folder, by clicking on the button "Next" or "previous."  Works with both files on the disk hard and files on a USB key.  Seems pretty obvious to me.

  Am I missing something?

  (PS: I'm sure that someone else asked this, but a couple of searches do not turn up quite the same question.)

  Last updated on 15/07/13: I managed to solve this problem. All I had to do was to rename the folder in the case to be 'Photos' instead 'photos.' It's a trick that I had read some time ago and had not followed. Once I renamed the mounted folder (because it shows on the C drive), the photos are visible in the Photos app.   Curiously, the photos appear but not the name of the subfolder. Not really a major problem, but a little... weird, maybe.

  Hi Benzman,

  1. what other app are you talking about where the photos are working properly?
  2. were there any changes (hardware or software) to the computer before the show?
  3. What is the format of these photos?
   
  I tried on my side, and it works correctly.
  a: I clicked on the Windows Logo + E to bring up Windows Explorer.
  b: then I selected all the photos and then right-click on it and choose Open.
  c: open photos, and then I click on the arrows to navigate to other photos.
   
   
  Good day!

• Pavilion, A8M2N - LA, lost usb ports

  I have a Pavilion a1637c I reinstall Win XP on it.  The recommended HP drivers & updates for XP listed here see the BIOS A8M2N - update v 3.10 (sp35111).   It's the 1st update, I tried after XP & his SP2 set.  Now, I've lost the use of my USB ports!  The bios has updated to version 3.10.  I know that the usb ports worked initially because I had loaded the 3,10 flash bios from a usb key.

  I tried to reset the bios to its default values, but it seems that now version 3.10 is the new default.  Is there a way maybe to return to an earlier version of bios?

  I have a card Asus A8M2N - LA NodusM3-GL8E with 4 memory slots.  I saw messages on other models using the other Council A8M2N with links to a flash of the various bios (example here).  Since I'm half messed up already, I hope for a little advice to completely avoid bricking box of this lady.

  Thanks for any help you can offer!

  Well, now I feel like such a dummy...  I started a chat session of support with the support of hp, and his suggestion was to have windows to reinstall the drivers for the usb device.  and now all the usb ports seem to work like a champ.  I feel so bad that this box has gathered dust for that long, that's all what I had to do.

  I hope that others can learn from this!

  After the execution of the sp35111 video update & bios, you may need to use the device mgr and update the drivers for the usb ports controllers, etc. windows.

  You guys thank you for the response back.

• iPhone 7 will not play audio via the USB port on the car.

  When I plug my iPhone USB port 7 more in my car (15 Jeep Grand Cherokee), the artist/song/podcast information appears on the screen, but the sound plays through the speakers of the phone.  I have confirmed that my settings are all the same as they were on my 6s, who played without any problems via the USB connection.  Bluetooth streaming works fine - no problems at all.  Any ideas, or is this a problem similar to that people have with CarPlay?

  Welcome to Apple Support communities, kevo.mac!

  Congratulations on your new iPhone 7 more! I see that you connect with your Jeep Grand Cherokee using the USB port. Everything seems to work fine, except that the music plays through the phone instead. I'll be happy to help you to get this working.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  If you are using USB playback

  Restart your iOS device and your car.
  Connect your iOS device to another stereo USB port (if you have one).
  Try another USB cable.
  Update your iOS device.
  Install the updates to the firmware of your car radio.
  Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help.
  If you can not play audio from an app Apple, contact Apple technical support.

  Enjoy your weekend!