desperately need the cradle or the USB connector

Similar Questions

• I desperately need the key sequence from tap to install options for factory of MS. HP G6 disks with windows 8

  I desperately need the key sequence from tap to install options for factory of MS. HP G6 disks with windows 8 OS. Fractured and the nonitor laptop monitor does not turn on during this process.  examplechoose an option scroll 2 3? I can't see ty ty

  Hi Masquerade,

  I suggest you to contact HP support.

  http://WWW8.HP.com/in/en/support.html

  I hope this helps.

• Audio output using the USB connector problem

  I use a USB connector to connect with Audio output. It's because my headphones Jack does not work.

  It worked without problems so far.

  My problem is that there is no output from my laptop to this USB device. The music plays and can be heard on the laptop. Connections (USB device & son) of the laptop work.

  I'm ising Vista home versio

  Any ideas?

  Try this:

  With the USB speaker connected, right click on the speaker icon on the tray (right), left click on 'sounds '. On the tab 'Read' the USB speaker should be listed, click to select it, and then click the button "set as default". Click the OK button to exit.

  Alternatively, you can go to control panel, Sound.

• Help! Need the USB DRIVERS for my HP G6-2123us 3.0!

  Did a fresh install of windows 7.

  Went to the pilot site could not find drivers for USB 3.0 for this computer.

  They worked before I did a new install.

  This laptop has usb 3.0 ports so please help me!

  Thank you, Lawrence

  Hello

  Well, you asked for USB 3.0 driver but actually NOT. The use of the fix to SM Bus controller would help:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?rule=60443&cc=us&DLC=en&LC=en&OS=4063&product=5273777&softwareitem=ob-116222-1&sw_lang=

  Then, install the above to USB.

  Kind regards.

• lost to microsoft wireless optical mouse usb connector - is it possible to continue using the mouse without the USB?

  I lost the usb connector for my 2000 microsoft wireless optical mouse for my laptop to recognize it.  Y at - it a download for my wireless laptop, so I can still use this mouse or is it still possible without the USB?

  Hi TA68.

  ·         Are you referring to transmitter/receiver for the wireless mouse?

  If so, you won't might be able to use the mouse, unless you have the device. See the following article for more information.

  How to replace hardware or lost, broken, or missing Microsoft software

• USB 3.0 flash drives doesn't work is not on the USB 2.0 in windows 7

  My kingston USB 3.0 does not no flash drives or supported on USB 2.0 in windows 7 and 'The window error' occurred: Windows found driver software for your device, but has encountered an error trying to install.

  Hi Faisal,.

  What is the brand and model of the computer?

  You will need installed USB 3.0 drivers on the manufacturer's Web site work with the USB 3.0 flash drives.

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  This problem occurs because the USB 3.0 device is not completely inserted in the port.

  The USB 3.0 supports the devices USB 1.0, 2.0 and 3.0. The first layer of pins inside the USB connector are for USB 1.0 and 2.0 ports. The second layer of pins inside the USB connector is USB 3.0 ports. Therefore, to resolve this problem, make sure that the USB 3.0 device is inserted in the port.

  Method 2:

  Uninstall and reinstall the USB drivers and check if it helps.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, run, type sysdm.cpl in the Open box and then click OK.

  (b) click on the Hardware tab.

  (c) click on the button Device Manager.

  (d) expand Bus USB controllers.

  (e) each device under the node Bus USB controllersright click and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  We know the results.

• Keyboard-mouse 5188-6816: is a replacement USB connector for a keyboard 5188-6816

  Keyboard-mouse 5188-6816 has stopped working.  The "connect" to connect the keyboard and mouse to the USB connector no light no more on the USB connector.  Technical support said I had to replace the USB connector.  Are offered through HP?  How can I find one?

  Your 2.4 GHz wireless keyboard mouse combo is not delivered with a usb cable.

  It uses a usb dongle which connects the keyboard and mouse to the PC destop wireless.

  You can't buy a replacement dongle.

  A wireless dongle is coded permanently to the pairs of keyboards and mouse at the plant combos.

  Your technical support must have told you that.

  If your keyboard was bluetooth it would have been a different story and a generic Bluetooth dongle replacement could have been bought.

  

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• Satellite A200-1NF needs time to read the USB flash drive

  Hello

  I have a Toshiba Satellite A200-1NF, model No.: ETA 6-055021FR works with Windows 7.

  My problem is that my USB is plenty of time to read the USB keys.

  Could you please help me to solve this problem.

  Thank you.

  Sorry, but for me the question is not clear enough... Satellite A200 recognizes the connected USB MemoryStick?
  If he recognizes the USB device connected, then everything seems to be OK.

  By the way: you said that the laptop needs a lot of time reading the USB...
  How long does it take and have you checked if the number is displayed using different USB ports and different flash memory sticks?

  If this is not the case, what to do

• I use a USB key to solid state. On my Win7 PC, the drive is e: on my XP PC, the drive h: I need the drive must be the same.

  How I change one of them?

  I need them to be of the same kind when I run Outlook on two computers (the .pst file is on the USB key), the path to the Outlook folders must be the same or rules Outlook fails when you try to copy a message from the Inbox to another folder in Outlook e-mail.

  You probably have one of these drives to multi format card on your XP machine who caught a lot of drive letters.  If you don't mind not reconfigure your Outlook rules one last time, I suggest assignment drive letter Z (or something else, towards the end of the alphabet) to your external drive.

  With the drive connected to one of the computers, open disk management:

  • Right click on my computer > manage > disk management
  • Right-click on the drive letter in the upper pane corresponding to the external drive and select "change drive letter and paths".
  • Click the button change
  • Select the new letter drive and OK your way out

  Repeat on the other machine

• [NEED HELP] Acer B1-730HD stuck on the USB logo

  After update my Acer B1-730HD kitkat... The problem seen is dat what acer B1-730HD stuck on the USB logo. I'm looking for solution on google for a few days to view, not yet found how flashing a rom for Acer B1-730HD. I am very disappointed with your service as acer do not DOWNLOAD on the Web site's original rom. Now, I need original rom for Acer B1-730HD, please!

  Sorry to hear that you have this problem after the update of your tablet.

  You try to run a factory data reset.

  1. Turning off the tablet.
  2. Press and hold the Volume up button, which is located closer to the touch screen lock switch.
  3. With the Volume up button which is held, press in and hold the Power button for 3 seconds, then release it. Continue to hold the Volume up button.
  4. Once the tablet screen lights up, release the Volume up button.
  5. In the select the Boot Mode screen, select [SD picture Mode of update]. Use the Volume and Volume keys to navigate through menus and use the power button to select the desired option.
  6. On the Android system recovery screen, select wipe data / factory reset.
  7. When you are prompted to confirm deletion of all user data, select Yes - delete all user data.
  8. On the Android system recovery screen, select reboot system now. Your data will be erased.
  9. Your tablet will restart and go to the Welcome screen. Follow the steps on the screen to configure your tablet.

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Windows 7 does not allow you to copy tapes through the USB to the computer... need help!

  I bought a cassette/converter of Grace Digital Audio Player to convert cassettes to MP3 files on my computer (HP laptop Pavilion DV 7/Windows 7 64-bit). Directions say to just plug into the USB port, press Play on the machine and press Record on the Audacity software.  It copies the music... and all the other noises in the room.  I tried to disable the microphone from the computer... but then it won't copy the music at all.  I called the manufacturer of the product through and they say it's a Windows 7 problem.  So, how can this work?  Thanks for any help you can give me...

  Hello

  Follow the steps mentioned below.

  (a) plug one end of the audio cable into the headset of your cassette player or 'Line' jack out and the other end into 'Micro' of the sound card on your computer or "Line in" jack. To avoid any possible damage sound card, use if possible 'in Line' decision and not the "Microphone".

  (b) launch Audacity and change the type of entry 'in Line' or 'Microphone', depending on what jack of the soundcard you are using. This indicates Audacity to record everything he "hears" the map of sound input. To do this, open the menu editing, then Preferences. You will then see a screen that should do what you need: use the "Device" selector to choose your entry (sound card, microphone, audio jack, etc.) and change the 'Channels' selector to choose between mono or stereo recording.

  (c) press the record button on Audacity, then press play on your cassette (red circle).

  (d) press the stop (yellow square) on Audacity when the tape is finished playing.

  (e) use the menu option "file-> export to WAV" to save your record. The WAV file can be saved on your computer, converted to MP3 or burned on a CD. Get fancy with the Audacity audio editor features: you can cut, paste and add effects easily.

  You must save a clip of ten seconds at first, so that you can play it will immediately return in Audacity (green triangle button) and make sure your volume levels is good. If the audio recorded is too strong or too static, decrease the volume of your cassette player.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I have a mouse Microsoft Wireless Mobile 4000 and it won't work in the USB port that I need.

  The port that I need for work is where I took out the logitech corded mouse.   How can I fix it?  It works in another port, but not the one I want.

  Hello

  1 did you changes to the computer?

  2. you receive an error message?

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows FIX IT:

  http://support.Microsoft.com/mats/hardware_device_problems

  Method 2:

  I suggest you to see link and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  I also suggest you to see the links and check.

  I would say as update you the USB drivers and check.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  What to do when a device is not installed correctly:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

• How much GB needed the PEN USB for 'Back up and recovery' flash on the new Windows 8/Dell 3521

  1. I'm about to buy a new Windows 8/Dell and I need the answer above to implement.

  2. I have documents and photos on a separate USB Flash Pen, I want to copy in Windows 8/Dell. How it works, please?

  3. If I opt to connect again Windows 8 with the Local account, what applications will be excluded.  I have a microsoft also account, but I prefer the Local account sign in to the.

  4. stupid question, but not Windows 8 come with folders "My Documents" and "My Photos" already installed or do I need to create those myself?  I looked at several tutorials, but I'm not clear on this issue.

  Hello.

  1. According to the website of "create a recovery USB disk", it is usually between 3 and 6 GB, 8 GB USB key should be a lot.
  2. To copy your photos and documents to Windows 8 of your flash pen, simply plug the flash drive, open Explorer (shortcut +E) and drag - move the files in the folders of photos and documents.
  3. With the help of a local account prevents you from using OneDrive for backups of files online and save your settings.  I recommend creating a local account first, and then 'connect' to a Microsoft account.  In this way, you get all the benefits of an online account without sacrificing your local account, and you can always disconnect it later without affecting your local account.
  4. Yes it is safe.  These folders are in the same place as usual (under C:\Users\YourName), but they appear also as shortcuts when you open Explorer, to facilitate access.