I have a mouse Microsoft Wireless Mobile 4000 and it won't work in the USB port that I need.
The port that I need for work is where I took out the logitech corded mouse. How can I fix it? It works in another port, but not the one I want.
Hello
1 did you changes to the computer?
2. you receive an error message?
Method 1:
I suggest you run the Microsoft fixit tool and check.
Hardware devices do not work or are not detected in Windows FIX IT:
http://support.Microsoft.com/mats/hardware_device_problems
Method 2:
I suggest you to see link and check.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 3:
I also suggest you to see the links and check.
I would say as update you the USB drivers and check.
Update of the hardware driver that is not working properly:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
What to do when a device is not installed correctly:
http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly
Tags: Windows
Similar Questions
-
When I scroll with the wheel of the mouse Microsoft Wireless Mobile Mouse, it jumps instead of sliding to the bottom of the page. It ignores even the large amounts. This can be solved? Rose
Hi Rose,The problem occurs on specific applications?This can be for one of the following reasons:1. bad mouse is selected in the IntelliPoint software.2. conflict with other mouse or pointer (non-Microsoft) software.3. problem with IntelliPoint software or drivers.4 application does not correctly recognize scrolling the mouse messages.I suggest for the link and follow the steps in the KB article:The problems with the mouse button or scroll the parametersNote: Put the computer to normal mode after the troubleshooting in clean boot mode.Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further. -
Mouse Microsoft Wireless Presenter 8000 and Toshiba Bluetooth Stack
Some of the specific features of the MS Bluetooth Mouse will not work with the latest Toshiba Bluetooth Stack: magnifying glass, digital ink...
The other functions of this mouse (and the remote control works too) work perfectly. The magnifying glass, ink, etc., work only if the MS USB controller provided with this bluetooth mouse is plugged.
Lots of material and forums sites talking about this problem, that is to say at the end of this page: http://www.hardware-pacers.com/pages.php?catType=r&pid=352&id=968&pageX=on
Is there a chance to have these functions (magnifying glass, digital ink...) working with a future version of the Toshiba Bluetooth stack? Any idea of a delay? Or any idea of a tip to have it working today?
I have a MS IntelliMouse. MS has delivered additional software called Intelli-point with it, that supports all the extra buttons of this specific mouse. So I set up my mouse with the stack of Toshiba and installed the software Intelli-point after him. Now all the buttons work.
So I guess the Wireless Presenter also comes with a software taking in charge additional functions of all what this mouse.
If so, do you have it installed? -
2.4 ghz wireless mouse HP optical mobile - previous and next does not work
Hi all
I bought a HP optical mobile mouse Wireless 2.4 ghz, installed drivers and sw on the CD that comes with it, but I can't get the rear functions on the Center wheel to work (neither Chrome nor Windows Explorer).
My OS is Windows 7 Enterprise + SP1 (64-bit).
What is a driver/OS problem? Or should it work out of the box and is probably a hardware problem?
I have:
-uninstalled/reinstalled the drivers on the CD;
-uninstalled/reinstalled the drivers on the HP website;
-uninstalled/reinstalled the drivers on the HP Web page and then those on the CD (which I think makes some sort of upgrade on the next mouse HP).
What should I do to get rear to work?
Thanks in advance for your help.
Concerning
Just found the left/right arrows on the wheel are for horizontal scrolling only and not backward.
HP has the intention to support the previous/next function in this mouse model? The material is there, it's just a matter of drivers.
The issue has been resolved via the mouse with software keys HP isn't the remapping. This is something a standard user would probably hurt.
This is an entry level product, but 99% of the mice I've seen who have wheel left/center capabilities can be configured to forward/backward.
-
Upgrade to the Mobile number and telephone number of work using the API in HRMS
Hello
Could you please let me know how can I update the Mobile work telafone number number and Email address in the HRMS Oracle by using the API.
I thank in advance...
Martine TremblayHello
Why to use hr_phone_api.create_or_update_phone to update the phone number, you can use below - APIhr_phone_api.update_phone
(p_phone_id-online lc_phone_id,
p_date_from-online trunc (sysdate),
p_date_to => NULL,
p_phone_type-online "H1."
p_phone_number-online '0119333944',
p_object_version_number-online lc_obj_ver_no,
p_validate-online fake,
p_effective_date-online trunc (sysdate),
p_party_id-online x_party_id,
p_validity-online x_validity
);PS - Please mark my post useful/correct if it was, that will be good for my profile. You must mark each post useful or correct individually.
Thank you
Gerard -
Microsoft Wireless Mobile Mouse 3000 pointer doesn't move.
My wireless mouse pointer won't move when I move the mouse. Clicking on will work to place the cursor/pointer is but the pointer does not move. Green light on the mouse turns off shortly after start. The battery is new. It happened when I unploug the mouse to move the laptopcomputer and in general he reajusts himself, but no more.
Hello
Thanks for posting your query in the Microsoft Community Forums.
I understand from the description of the problem, that you have problems with Microsoft Wireless Mobile Mouse 3000.
Help me with little information.
-What version of windows you are using on the computer?
I suggest you to consult the help articles and check if it helps.
Troubleshoot a wireless mouse that does not correctly
http://support.Microsoft.com/kb/321122
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
-
How can I replace my Microsoft Wireless Mobile Mouse USB receiver.
How can I replace my USB receiver. I just lost and I only want to buy a newer version for distributor of mouse Microsoft Wireless mobile mouse 4000.
Hello
Check with your local retailers and Microsoft Hardware Support.
Microsoft Hardware support
http://www.Microsoft.com/hardware/en-us/supportMicrosoft Hardware - contact us
http://www.Microsoft.com/hardware/en-us/support/contact-usI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Okay, so I bought recently when a helmet (Microsoft LifeChat LX-3000) and a mouse (Microsoft Wireless Mobile Mouse 6000) wireless, but my laptop Windows Vista Home Premium is having problems with the installation and execution of the drivers for these two devices.
Original title: driver for headset and a wireless mouse will not install correctly
I already had the Wireless Mobile Mouse 3000 and had no problems whatsoever doing this job, but I got it for at least a year I guess. I also installed the software that came with the CD (called Microsoft Mouse, even though it says on the CD Intellipoint 7.1) for the mouse and driver online for headphones (called helmet Microsoft) have also downloaded. However, when I plug in the devices, he's trying to find the drivers. Initially, it comes up with a window saying "New hardware found" and has the ability to "locate and install driver software", despite the fact that I already supposed to be installed the drivers through download programs or to use the CD.
In any case, I select the "locate and install driver software" and it says "search Windows Update... «for 30 seconds or so, then said «Installing the driver software...» ».
I then get a message saying "Windows has encountered a problem... etc... This operation requires an interactive window station. If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »
If I disconnect and reconnect the device, I get the same situation with "new hardware found" and the options for search again...
I tried both devices on another computer (Windows XP) and they manage to set up automatically even without the software provided on the CD or on the website and work perfectly well, however I need them working on my laptop ;)
So I guess the main problem is that I get this message "interactive window station" preventing the drivers to install correctly. I have no idea what this means and have spent a lot of time trying to find them online.
Well, I've resorted to re - install Windows Vista and installed very well both automatically when it is plugged.
Now to reinstall all my programs... fun fun fun...
Thanks for your help anyway!
-
My Microsoft Wireless Mobile Mouse 4000 has stopped working!
My Microsoft Wireless Mobile Mouse 4000 was working the other day and now won't work. I tried batteries, turning power on and off, press and hold the bottom of the mouse USB and taking even the USB key. I have a Windows 7 computer, I don't know how relevant this is, but I thought I should put it here anyway. ANYONE HELP!
I had the same problem and this is what worked for me:
remove the USB transceiver
Open the DEVICE MANAGER
Right click on the MOUSE AND OTHER DEVICES of SCORE and choose SCAN for HARDWARE CHANGES
Click with the right button on USB BUS CONTROLLERS, and then select SCAN for HARDWARE CHANGES
Insert the USB transceiver
Your computer should detect the mouse and function properly
I have to repeat this process pretty much whenever I start my laptop, but it is only a few steps and not really a huge nusiance.
Good luck.
-
Dysfunctions of the Microsoft Wireless Mobile Mouse 4000 Nano transceiver
Microsoft Wireless Mobile Mouse 4000 Nano transceiver malfunction, overheated and burned my hand, how to contact Microsoft and get a new mouse?
I bought it on a year ago, worked well until the transceiver overheated and did not get recognized more by any pc.Hello
The reasons of the overheating of the transceiver are not known, because it was not isolated incident, please go to the link provided below for more information on how to replace Microsoft software or hardware, order service packs and replace product manuals.
How to replace Microsoft software or hardware, order service packs and replace product manuals
http://support.Microsoft.com/kb/326246
You can also get in touch with Microsoft hardware support for assistance.
Contact us
http://www.Microsoft.com/hardware/en-us/support/contact-us
-
Microsoft wireless mobile mouse 4000 rubber wheels problems.
My wheel cover Microsoft wireless mobile mouse 4000 rubber became sticky and is more tightly bound to the wheel. There were reported incidents of what happens to third parties?
Hello
Consult the broken / defective products section from the following link:
http://www.Microsoft.com/hardware/en-us/support/contact-us
I hope this helps.
-
Microsoft Wireless Mobile Mouse 4000 - needs new batteries, but usually turn on after.
I have a Wireless Mobile Mouse 4000 and it has a slow red light which means that the batteries are low. So I put in new batteries and it won't turn! BUT, if I put the old battery in, it lights up? What in the world is not going?
OK, I solved it. It turns out that someone decided they would take used batteries and swap them with new batteries, but put all the old back in the same box as the nine and mix them together... So I used just used batteries. I found 1 battery in good condition.
-
Microsoft Mouse Blue track mobile 4000 drifts
I HAVE A BLUE TRACK USB MOUSE WIRELESS MODEL MS 4000 CLAS MICROSOFT 1 LEADS, NAME THE BOTTEM IS MICROSOFT WIRELESS MOBILE MOUSE4000, I HAVE LOADED DOWN THE PAKEGE HE CAME IN. THE PROBLEM IS THE ŒUVRES OF THE CURSOR FOR A FEW SECONDS, AND THEN HE FLED, I FACT SHURE THAT THE USB IS FAR & QUITE CLOSE & ELECTRECIAL DEVICE INTERFERENCE.
CAN YOU HELP ME WITH THE RIGHT DRIVER & WHERE THE MEEK. Thank you. SINDE * address email is removed from the privacy *.
Hello
I suggest you to contact the Microsoft Hardware support for assistance.
Supported Microsoft mouse, keyboards, LifeChat, LifeCam & more:
http://support.Microsoft.com/ph/7746
And see also:
http://support.Microsoft.com/kb/838398
http://support.Microsoft.com/kb/321122
Hope the information is useful
-
diagram of the battery for 3000 microsoft wireless mobile mouse
I just need a diagram of the door of the battery compartment for 3000 microsoft wireless mobile mouse. the silver metal piece is out and I need to see HOW
to reattach it properly so it will stay when I close the lid or the door to the battery compartment. Touch the + end of the battery to operate.Did you find the Mobile Mouse 3000 battery door diagram you are looking for last year?
I have the same situation. I don't need suggestions to inform microsoft of warranty. This is why you and I asked for the diagrams. If you have the diagram, or you can send me a photo of the battery door configuration, would be great. Thank you -
Microsoft Wireless Mobile Mouse 3500 problems.
I'm using Windows vista 32-bit on a Dell Studio 15 laptop. I have a Microsoft Wireless Mobile Mouse 3500. I plugged the nano-receiver into my USB port and installed the driver but the mouse does not work. It does not work if I move my mouse or click on the buttons. I have bluetooth activated on my laptop but there is no button on the mouse or nano receiver to synchronize with the laptop. I searched and searched the Internet to try to find an answer, but I don't see anything. Can anyone help please?
A couple of things you can look at at\try:
- Since beginning--> search box type mouse, when the application Microsoft Mouse appears select.
- Select the Dell Touchpad tab, then click on the picture to open the properties of the Touchpad.
- In the properties of the Touchpad, choose Device Select.
- Check the box that says "Disable touchpad/ponting stick when external USB mouse is present".
- Press OK.
From my experience with Dell laptops, I have also found that sometimes an external USB mouse fails to be recognized because of some quirks with power and USB. Let the wired mouse, then turn off the laptop and unplug the battery for about two minutes. Turn on the machine again and see if the 'magical' mouse appears.
Maybe you are looking for
-
Tecra 8000 composite video output
I'm running the video output from my tecra 8000 via yellow composite video connector at the rear of the unit. I thought it was as simple as pluging in both sides of a RCA (one end to the video input of a video recorder) Jack and the other end into th
-
I have problem with my iphone 5 has no 4g 3g only. in Sweden in the works of 4g Malmö... can someone help me please...
-
86 Windows protection error.
Protection faultError: 86 Image here:http://www.mediafire.com/imgbnc.php/9869d1cc140b102e02aa6552911025f3385c875a5ec7779ee639c40e4655706d6g.jpg Sometimes small window opens during the exploration of the error message files. Then when I click 'ok' to
-
HP Pavilion g6: Please help me remove the Power On password or administrator password
Please help me remove the administrator password or power on password. The stop code is: 68478111
-
Muse set cambio acentos en Español por otros characters
How I can delivery the problem that al publicar mi sitio en Español, todos los acentos cambio Muse has other characters?