dev Alpha: password after update problem

Similar Questions

• BlackBerry 10 Dev Alpha is not updated to 10.1 to 10.2

  I'm trying to update my device BlackBerry 10 Dev Alpha OS 10.1 to 10.2. I'm refernce documentation for it. I downloaded Autoload-DevAlphaC - 10.2.0.1157.exe try to update. But the command line stops without updating. Then I tried with loading auto-DevAlphaA_B - 10.2.0.1157.exe. Here he updates without any error in the command line. But the device does not start after that.

  Then, I go down to the previous version of the OS using the load auto-DevAlphaA_B - 10.1.0.1485.exe. Now the unit start with OS 10.1

  Why is this happening?

  I don't think that Dev Alpha (A) could be upgraded to version 10.2. I have tried both official and leaked OS but neither can start the device again. So currently my Dev Alpha holds only still 10.1.1485.

  If you really want to try 10.2, try using Dev Alpha B/C or official Z10/Q10.

• iPad suddenly requested a password after update and allow a trial and then locks for 60 minutes?

  After update last night my iPad is suddenly asking a password (which was disabled before) and now provides that an attempt to get the good pw

  PassWORD or PassCODE? I've just updated me too and I think the title above says to create a password. If that's what you see, press Options to access code (just above the keyboard) then do not add access code.

• Could not import old passwords after update.

  After a recent update on my firefox Dev Edition (42.0a2) he wiped my browser without my knowledge and transferred the 'old' information in a "Old Firefox" folder on my desktop. I got some of them back but will not transfer my saved passwords. I copy the files from the old folder in my home directory, but it does not appear in the browser, nor do the AutoComplete passwords.

  COR - el said

  Have you checked all these files profile?

  I did, Yes.

  It's my fault for trusting software alpha as much as I did, so I do not really expect to recover my password. I appreciate the help, but I think I can handle not having not a little obscure passwords.

• EliteBook 8570w: the sound quality after update problem

  I connected the laptop to a docking station. The docking station has a connection to a headset/external amplifier. Ideal to connect the amplifier. Only in this respect has more no bass. The connection of the helmet of the computer laptop itself has a pleasant sound, but I do not like to keep card 10 x a day between headset and amp switching. (Phone + Amp = echo). My alarm only works with external stakeholders, but Skype and Softphone want the headset.

  Also, I turn off HP speakers in the system and have no more just the external headphones, since one of the most recent updates the internal speakers don't turn off when the headset is connected. This has implications for readers audio and video players, as they want their sounds through HP speakers. Only VLC mediaplayer has the possibility to move from one sound channel, but I have to change every time I start a video.

  Before the update, there was an automatic switch and I could let two of them on and the sound channel chose autamtically and turn to the helmet that was plugged, etc..

  I use Windows 7 64-bit and windows 10 is not an option due to various programs more alumni who should be updated (if it is still possible), which would be very expensive.

  I noticed something new has been installed called SRS Premium Sound Pro. Maybe it's the culprit. I dare not change anything in it.

  Does anyone know how to debug this?

  Hello

  Could update you the

  Driver Audio of IDT high definition (HD)

  Type:	-Audio driver
  Version:	6.10.6435.0; 5.10.6435.0(5 février 2013)
  System:	Microsoft Windows 7 Enterprise (64-bit) | See all
  Name of the file:	sp60317.exe (42 MB)

  Link: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5257503 & swItemId = ob_115135_1 & swEnvOid = 4060 #tab1

  Also, I suggest you to disable all the improvements in the properties of speakers and check out. See the steps below:

  1. Press on the key Windows + X.
  2. Click on Control Panel.
  3. Double-click the sound icon and click on speakers.
  4. Click on Properties.
  5. Click the enhancements tab.
  6. Now, click on "disable all sound effects.
  7. Click OK , and then check if the problem persists.

  If the problem still exists, as a solution, I suggest you uninstall and reinstall the sound drivers in compatibility mode and check if it works for you,. Refer to the steps below:

  Follow the steps to uninstall the audio driver:

  1. Press the Windows key + X key , and then click Device Manager.
  2. Expand 'Audio Video and Game Controllers'.
  3. Right-click on the audio device listed and click on 'Uninstall'.
  4. Select the option to remove the software driver.
  5. Restart the computer after its uninstalled.

  Now download the drivers from the manufacturer's Web site and install it in Windows 8.1 compatibility mode. Follow the steps below to install the drivers in compatibility mode:

  1. Right click on the driver configuration file and click on 'Properties'.
  2. Click on the "compatibility" tab and check the box ' run this program in compatibility mode for "and select operating system Windows 8.1 since the menu drop-down."
  3. Click 'Apply' and click on 'OK' and run the file to install it.

  Hope this helps you...

  Click on Bravo and accept as a Solution if my answer was helpful and answered your question.

  I am an employee of HP!

• Re: Satellite P850 sets a BIOS password after update BIOS 1.50

  Hi all

  I have a Satellite P850/040 and after the BIOS update to the new version 1.50 I checked that a BIOS password has been set up, if I can start the operating system.

  It's amazing. I am very disappointed with Toshiba.

  How can I remove this password? Perhaps with no matter what JCMOS rider?

  Thanks in advance.

  > How can I remove this password? Perhaps with no matter what JCMOS rider?
  Unfortunately, something like this will not work. Best thing you can do now is to contact the nearest Toshiba service provider and ask for help.

  You shouldn't be disappointed. I know it's stupid situation but make a call, explain the situation and the guy will help you.

  You will find the phone number?

• Equium A200 - startup after update problems

  * After installation from what I understand, is the most recent update for windows vista and when the computer has re boots itself, I am greeted with the following message: *.

  ' + Cannot start WIndows. A recent change in hardware or software may be the cause. To solve the problem: +.
  + 1. Insert your windows installation disc, and then restart your computer.
  + 2. Choose your language settings, and then click "next". +
  + 3. Click on "repair your computer." +

  + If you don't have this disk, contact your system administrator or computer manufacturer for assistance. +

  + File: / Boot? BCD +.
  + Status: 0xc000000f +.
  + Info: an error occurred trying to read the boot configuration data. » +

  * Iv tried to start in safe mode by holding F8 when booting, but this causes just the start screen flashes that light while a sharp peak noise, like an alarm.*
  * Am I right in assuming that when he tells you to insert the disc of windows intillation that it is made reference on the recovery disk 'product' I got with the laptop? If so, I'm reluctant to use this drive as it says on the back of the box "WARNING: If you use the product recovery, you will lose all data on the hard drives..." It is the only option or offer just a funtion of repair that will remove all files that I have a number of very important issues that were yet to be supported in amont.*

  * Any help would be appreciated *.

  * Thank you *.

  * Stores *.

  Thanks for this info stores.

• IPad after update, problems with applications

  After the Ipad update to 9.1.2, we have a problem, whenever we are entering an App, emails, photos, etc., we lose the connection with the application. We will and simply press a button, then let's just out of the app again. We are unable to read the email, see photo etc. Anyone has a solution for this.

  In addition the application which is suppose to update, will not update

  Hello abcglad,

  If I understand correctly, you are able to open your apps, but what you do in them makes it insensitive so you press the Home button to exit the application, and then go back into it to make it work. This looks like a software issue to me, we should be able to solve. I would start by quit all applications running on your iPad. Normally, simply quit the application affected, but in this case because it seems to be all of them, I'd leave all.

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have finished that force the iPad to restart with the Home and Sleep/Wake buttons as described in the following article and the question again:

  iOS: switch off and on (restart) and reset
   
  If the problem persists, save your device in iTunes, then restore it like new and verify that it works.
   
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Thank you for using communities of Apple Support, all the best!

• Satellite A110 - BIOS password after update BIOS interruption

  Hello

  I have a Satellite A110, I did a flash update using the Phoenix utility within windows XP. Upgrade flash my office, I need to disconnect the battery to be placed to restart the laptop. After that whenever I try to turn on the laptop it ask me a password on the BIOS but I never put a password in the BIOS.

  How can I please?

  See you soon,.

  David

  Hello David

  I believe that no one here can say with certainty what was happen exactly after the update of the BIOS. The fact is that the BIOS password can be removed by service provider only. Contact the nearest service provider and explain the situation.

  I'm sure they can know what was happen exactly and help you remove the BIOS password.

• Satellite A200 - 1 M 7: request password after update Bios

  I have PC Satellite A200 - 1 M 7.
  I downloaded the update of BIOS, installed.

  After completing the installation application password PC (I have had no password on the front).
  BIOS is also asking password.

  Can you help me?

  It's strange, but a BIOS password can only be deleted an ASP.

  In your case I find the nearest ASP and ask for help.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Dell your 2161DS remote console switch cannot change the Admin password after updated to the latest Firmware

  Dear Sir:
   
  After having updated the latest Firmware [Dell your 2161DS digital switch, Firmware, Multi OS, Multi language, Multi system, v.3.1.0.0, 1.3 (A03-00)] and restore the default settings. We do this directly through the Remote Console software.  Seeing the log in window, the user name is "Admin" and there is no password.  We can access in the switch, but "Admin" a/c is missing from the "User" settings category. So we can't change the Admin password.
   
  Could you help us to change any password Admin password?
   
  Thank you
   
  Tim.
  
  

• Unable to connect on the compuyer using the password after update the Microsoft Patch.

  My antivirus software says that I was behind in the patches from Microsoft, so I downloaded and applied these.  There was some kind of error and it corrupted my password of the admin account.   I type the correct password, but it does not accept it.  The only account I use is a non-admin account password.  Any ideas?

  The only account I use is a non-admin account password.  Any ideas?

  There are many options built into Windows to help you out of this situation:

  • Restart the computer with your repair CD Windows, then use system restore to set Windows to a point when your password has always worked.
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)
  • Ask your friendly computer dealer to reset the password for you.

  When you're done, plan ahead a little and create, test and document a spare, even admin account that you have a spare House key. This will save you a lot of trouble.

• Audio dev Alpha C Cup using OpenAL

  Hello

  I have some problem with the audio on my device Dev Alpha C and I was wondering if anyone else has had or similar problems or that he might be able to offer a solution.

  The problem

  When you run our game on a device Dev Alpha C, after a short period the sound effects cut. After that no sound effects are played once again, apart from very occasional snippets of sounds, as the device is trying to play them but quickly to cut again.

  The strange thing is that the same code works fine on the Alpha of A Dev.

  Implementation

  The sound effects are implemented using OpenAL and OpenALUT.  Our music is played using the multimedia rendering engine (and works very well).  I checked for errors from OpenAL, but it is not everything.

  Our installation of OpenAL is quite simple and in fact is the following (note that I cut an error handling form all my code samples for brevity):

  if(alutInitWithoutContext(NULL, NULL))
  {
      device = alcOpenDevice(NULL);
      if(device != NULL)
      {
          context = alcCreateContext(device, 0);
          if(context != NULL)
          {
              alcMakeContextCurrent(context);
              alGenBuffers(MAX_SOUND_BUFFERS, buffers);
              alGenSources(MAX_SOUND_CHANNELS, sources);
          }
      }
  }
  

  Sounds are then loaded by:

  void *data=alutLoadMemoryFromFile(filepath.c_str(), &format, &size, &freq);
  alBufferData(buffers[bufferIndex], format, data, size, freq);
  

  (There are some parameters of sound parameters that I haven't posted because I don't think that is where the error but I can add it if it could be relevant to reprogramming).

  Finally the sounds are played using

  alSourcePlay(sourceNum);
  

  I use SDK 10.1.0.1020 and Dev Alpha C is on the firmware 10.1.0.138.

  If anyone has any suggestions, they would be welcome!

  On the problem of origin, was published a new firmware which seems to fix the problem. You can find it here: https://developer.blackberry.com/blackberry10devalpha/devalpha_update.html.  I tested it on our Dev C Alpha and it seems to work very well - I'm always test so will update if I have problems, but it seems OK so far.

  @beemaster - you might want to consider posting this question as a separate topic, as there is a good chance of people won't find it in this thread.  For what it's worth, we use MP3s in our game very well, even if we don't use of stunts and use the multimedia rendering engine to play, which could explain the observed differences.

• Dev alpha may not work after update to OS10.0.6.386

  Hi all. It seems that my alpha dev cannot restart after the update. It takes 2 hours to restart, but failed. How could I solve this problem?

  Revive my dev alpha (which means alpha is turned off or has not started):
  1 disconnect the alpha of the PC
  2. start DM BB 7.1
  3. connect alpha PC
  DM BB cannot communicate with the connected device.
  Note: This will be auto-start your device. Can take up to 20 minutes if the 1st reboot.

  If you have successfully updated to R6, click Cancel.
  Otherwise, click Update, followed by repair, etc.

  On DM, click on connect to the device (status bar below on the right).

• Strange behavior of audio subsystem after update Dev Alpha 10 to 10.0.9.388

  Hello world!

  Has anyone noticed a strange behavior of the behavior of 10.0.9.388 audio subsystem firmware. Recently, after firmware update Dev Alpha 10 to 10.0.9.388 subsystem audio misbehavies in the following way:

  (1) if the external headphones/speakers connected to the audio line-out looks to be preprocessed by low-pass filter and surround effect. The device reported by AudioManager is/dev/snd/pcmPrefferedp. Would it be a bug in formware and re-routing audio internal speaker to the line-out socket did not exclude specific pre-treatment?

  (2) on the previous firmwares if audio goes out of the internal speaker and then the helmet is connected to Jack line out change of itinerary was seemlesly happening and he kept playing with headphones without additional measures in the application. Now, peripheral audio is not consume audio samples and so crashes until it is closed and reopened.

  On the previous firmwares were not all the problems of this kind. Would be - what a few unlucky flashing firmware try (if it is still possible) or bug of 10.0.9.388.

  It will be good to hear comments & thoughts about these questions.

  Best regards

  Dmitry.

  I suggest to create two entries Issue Tracker: https://www.blackberry.com/jira