Satellite A110 - BIOS password after update BIOS interruption

Similar Questions

• Re: Satellite P850 sets a BIOS password after update BIOS 1.50

  Hi all

  I have a Satellite P850/040 and after the BIOS update to the new version 1.50 I checked that a BIOS password has been set up, if I can start the operating system.

  It's amazing. I am very disappointed with Toshiba.

  How can I remove this password? Perhaps with no matter what JCMOS rider?

  Thanks in advance.

  > How can I remove this password? Perhaps with no matter what JCMOS rider?
  Unfortunately, something like this will not work. Best thing you can do now is to contact the nearest Toshiba service provider and ask for help.

  You shouldn't be disappointed. I know it's stupid situation but make a call, explain the situation and the guy will help you.

  You will find the phone number?

• Satellite Pro L300: BSOD after updating BIOS

  Hello

  After updating the Bios of the Satellite Pro L300, windows will not start!
  His show the blue screen of death!

  What can I do?

  Hello

  You are able to access the BIOS settings?
  I m not very well why this BSOD appears, but eventually the SATA mode settings have been changed after the BIOS update

  Usually the SATA mode must be on AHCI if the SATA drivers are installed.
  But if the SATA drivers are not included the SATA mode must be set to compatible.

  Please check this!

  In addition, you could set the BIOS default settings and may try to start the computer again.

• Satellite A80-135 PSA80: after updating Bios keyboard will not

  SATELLITE A80 - 135 MS (MS is for Spanish)?
  model PSA80E-04C00JSP
  SER 55XXXXXXK

  Windows xp sp3 Spanish

  -> Update of the riginal 1.5_ bios (bios ID EAT10 / EAT20 bios version: v1.50)
  for _v 2.8_

  Downloaded bios - 20070709170816.zip of the Spain of toshiba
  http://es.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=es

  Unzipped the file and found an excutable "windows installation" and "AT10280a.rom".
  Double-click on the installer and...

  .... Now the keyboard is used for nothing (strange signs instead of letters)

  During the update (windows xp) I think I saw something on a master (original rom backup) in c:/windows/temp
  but now I can't find the backup rom.

  Can anyone help?
  Would it be possible to 'downgrade' to the bios (1.5) original and if so... where can I find it?

  Thank you

  Hello

  I don t know why it happened after updating the BIOS, but I guess that the language of the keyboard settings are not correct.

  Go to Control Panel-> Regional Options & language-> language (second tab)-> Details

  Here, you must choose the right keyboard (Spanish) language?

  Good bye

• Satellite L655 (PSK1JE) - 100% after update BIOS fan speed

  Hello

  Yesterday, I do BIOS update since version 2.10 to 2.20. The update of configuration correctly but the problem is the fan, the speed is 100% all the time.

  others have this problem with this version of bios?

  Can I downgrade to the version of the bios?

  Thank you and waiting for your answers

  Hi kingofcopy,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default values.

  Have you tested the behavior of fan with cooling optimized battery option? In Windows power management, you can define more low fan speed in power management to reduce the activity of the fan.

  Check this box!

• Satellite A-C50-K9K - after updating the BIOS, cooling fan is very loud

  Gas station proposed to update the BIOS. 1.00 to 1.30. After updating the cooling system is 90% of the time. Load the default settings BIOS do not change.

  No backup of the BIOS. Is it possible to download BIOS 1.00 or solve this problem?

  The downgrade of the BIOS is not possible because you n t have the first version of BIOS and even if you get the 1.0 version of BIOS, the BIOS update procedure is not possible because the newer version is already flashed.

  But I recommend you set the method in Windows to optimize power or better management the cooling battery life

  + Control Panel--> Power Options--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method.

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Satellite A110 - BIOS for Win7 and FN key features

  Hello
  I installed the new Windows 7 on my computer laptop toshiba a110 and surprisingly almost every device was dected and installed by win7. There is problem with PCMCIA driver for Vista solved the problem. But I always have problems with the function keys and of the extra buttons. Do you know which driver should I install to operate the keys Fn?
  Either way, I would ask if toshiba will be dedicated for toshiba satellite A110 Windows 7 drivers?

  I have another problem with the BIOS.
  I have seen that there is new bios update available for my laptop but I don't know which version should I use for WINDOWS 7?
  01/21/09
  Update the BIOS
  Toshiba Windows Vista 32 bit 5, 40 - WIN World Wide
  01/21/09
  Update the BIOS
  Toshiba OS independent 2, 00 - WIN World Wide

  I thought that if I have win7 OS independent bios update should be fine for me, but in this version, there is a warning, that 2, 00 - bios WIN is not dedicated for users of Vista. I've heard that Windows 7 is based on Vista OS so I don't completely now which version should I choose.

  Waiting for help
  Simon

  I assume that your Satellite A110 will not be supported for Win7. This means that you probably won't be able to find any driver, tool or utility designed for Win7.
  In my opinion, you should be happy that Win7 works and you have no serious problems with the physical property of work. Then you probably need to have lived without some specific features of Toshiba FN options, but most of them, you can use in different contexts.

  On the BIOS I say not a lot but, as far as I know, Toshiba will offer no special Win7 BIOS update for old models of laptops and if everything works well, you have to update BIOS at all.
  In any case for me, it makes sense to use the latest version of the BIOS that is designed for Vista OS.

• Satellite A110-275 restarts after a stop on the current

  Hello

  After installing xp sp3 if I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  If I turn off the external power (or pull the power cable on) if the machine is running on its battery - then stop - everything works fine. I have checked the event logs and see no error which would cause a reboot on shutdown. I disabled the reboot on system error switch and I turned off the wake of the bios on the options.

  I also looked in Device Manager and off anything that could wake the machine after his stop (only found the modem). I am at a loss - I don't see why external power would cause the works to restart but battery very well. Finally its possible this safe mode can also not working after installed sp3.

  If anyone has any ideas - I'd appreciate really them. It looks like there may be a newer bios available (I'm on V1.2) but I've seen a few posts cautioned against an updated bios windows at level - once again any info - very very welcome.

  System information:
  Toshiba Satellite - A110-275
  Windows XP pro - sp3

  > After installing xp sp3 so I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  Have you noticed this problem before installing SP3?

  Its strange noises that this occurs only when the laptop is connected to the power adapter

  I searched in the forum for similar issues and in many cases enabled Wake up on LAN would cause a reboot.
  I know, you have this disabled in BIOS, but you should also check the LAN card properties in Device Manager.
  You will find an Advanced tab can disable this option too!

  Satellite A110-275 belongs to the series of PSAB0E.
  There is a new BIOS for PSAB0E series.

  BIOS v2.0 is OS independent. Means that he s created for Win XP and other OS.
  V5.40 BIOS is only for Vista OS.

  If you are using Win XP, then you should take the independent BIOS of the OS!

  Here you can find details of the update to the BIOS:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

• Satellite A110 restarts automatically after each stop

  Hello!

  I have the following problem:
  When to stop the system, my laptop while first goes off completely, as you wish, but 2 seconds later, he again. His behavior differs from a usual restart - then will not turn off, it restarts directly. In addition I can rule out software problems, since I've tested with different operating systems and the behavior is the same everywhere. This problem did not exist before, but suddenly occurred and now is it each time.
  Ah, it is also important if the power adapter is NOT connected (i.e. portable runs only on battery), the problem does not occur. If the laptop works on current alternative, the problem occurs, regardless of whether or not the battery is in Notepad.

  Can anyone help? Each index is very appreciated!

  My laptop is a
  Satellite A110-228
  Part number: PSAB0E-00J007GR

  Thank you very much!

  Hi zaez,

  I doubt that the problem is caused by the OS because it doesn t affect the system when it turn off so there must be another reason of this problem...

  Have you attached external devices?
  They could cause such an automatic start

  I also is advised to disable Wake up on LAN functionality in the BIOS and load the default settings.

• iPad suddenly requested a password after update and allow a trial and then locks for 60 minutes?

  After update last night my iPad is suddenly asking a password (which was disabled before) and now provides that an attempt to get the good pw

  PassWORD or PassCODE? I've just updated me too and I think the title above says to create a password. If that's what you see, press Options to access code (just above the keyboard) then do not add access code.

• Satellite A110-115 and RAM update

  Hello

  I have a Satellite A110-115 with 2x512Mb RAM installed. I removed the and installed 2x1GB PC2-5300 667 Mhz (Kingston KVR667D2S5 / 1 G), but when the PC boots it go to BSOD and begins to start again.

  I tried with one only new memory cards, but with the same results. I know that the old RAM PC2-4200 533 Mhz but I think it should work with 667 Mhz as well?

  Anyone who knows what's the problem here?

  It's nice that you believe this, but the fact is that you must use compatible modules.
  Use maximum 2 GB of RAM I recommend you to use compatible DDR2 400/533 module 1 GB (PA3411U-1M1G).

• Satellite A200 - 1 M 7: request password after update Bios

  I have PC Satellite A200 - 1 M 7.
  I downloaded the update of BIOS, installed.

  After completing the installation application password PC (I have had no password on the front).
  BIOS is also asking password.

  Can you help me?

  It's strange, but a BIOS password can only be deleted an ASP.

  In your case I find the nearest ASP and ask for help.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• No answer does reference satellite A110-195 (PSAB0) after BIOS update

  I downloaded the latest Bios for laptop and when I installed it... It gave me an error but I can't remember it.
  So I closed the flash bios and tried to restart windows but it hung at the "closing windows.
  So I pressed the button for 5 seconds and it didn't close.

  I tried several times but no response... so I closed it by removing the battery... after that I turned on the pc, the power light is on with cd and no signal in the monitor...

  I tried to change the Rams, but no change... the hard drive works and I tried not to connect an external monitor and no changes, but I'm sure that nothing happened to the VGA card.

  Please help me what should I do

  Hello

  Do not damage the BIOS is a fundamental requirement for the functionality of the laptop. From your description, there must be a problem with the BIOS itself. I can't say with certainty that the BIOS is damaged but if you noticed the error message, everything is possible.

  I'm afraid that your laptop must be controlled by technicians. Using different diagnostic tools, they can check if the BIOS is damaged or not. Sorry, but I don't think you can do something alone.

• Satellite L300 - 20 d - after updating the BIOS, that it does not start now

  Hello

  I bought my wife a Toshiba L300 - 20 d (PSLB8E-0CK00YEN). It came with loaded Vista, which it cannot do.

  My grandson offered also to sort. He has installed a new hard drive, loaded with XP and managed to get almost all the drivers working except the WiFi.

  After spending many hours, he decided to update the bios of v1.8 to v1.9. Since it does not start... It happens with the Toshba screen, start windows normally, then it attempts to load windows, flashing and start the cycle al.

  He has tried default settings, tried a XP disk, setting on the disk, nothing. He just does the same thing in safe mode.

  Any suggestions will be appreciated

  Concerning

  Keith

  Hello

  The wireless network card is enabled with the hardware switch on the computer laptop and FN + F8? Check this box!

  Additionally, make sure that the latest driver on the Toshiba site is installed, and check the settings of the wireless network adapter TCP/IP.

  Moreover a description that is more accurate than the WiFi works not would be very appreciated.

  Good bye