Satellite A200 - 1 M 7: request password after update Bios

Similar Questions

• Satellite A200-1FL asks for the password after the BIOS update

  Please answer who knows what to do.
  I have laptop SATELLITE A200-1Fl (PSAE6E).
  After the installation of update of the Bios (v1.7 12/10/2007 for x 64) my pc started to ask the password, I have never installed.

  I'm to tosh. out of warranty service center-useless.

  Hello

  Satellite A200's newest model of laptop and I can't believe as possible out of warranty. Please try to contact a few different FSA in your country. It should be clear somehow. If nothing is done please post again.

• Re: Satellite P850 sets a BIOS password after update BIOS 1.50

  Hi all

  I have a Satellite P850/040 and after the BIOS update to the new version 1.50 I checked that a BIOS password has been set up, if I can start the operating system.

  It's amazing. I am very disappointed with Toshiba.

  How can I remove this password? Perhaps with no matter what JCMOS rider?

  Thanks in advance.

  > How can I remove this password? Perhaps with no matter what JCMOS rider?
  Unfortunately, something like this will not work. Best thing you can do now is to contact the nearest Toshiba service provider and ask for help.

  You shouldn't be disappointed. I know it's stupid situation but make a call, explain the situation and the guy will help you.

  You will find the phone number?

• Satellite A110 - BIOS password after update BIOS interruption

  Hello

  I have a Satellite A110, I did a flash update using the Phoenix utility within windows XP. Upgrade flash my office, I need to disconnect the battery to be placed to restart the laptop. After that whenever I try to turn on the laptop it ask me a password on the BIOS but I never put a password in the BIOS.

  How can I please?

  See you soon,.

  David

  Hello David

  I believe that no one here can say with certainty what was happen exactly after the update of the BIOS. The fact is that the BIOS password can be removed by service provider only. Contact the nearest service provider and explain the situation.

  I'm sure they can know what was happen exactly and help you remove the BIOS password.

• Satellite Pro U300 (PSU31E) standby & hibernation fails after updating BIOS

  Hello

  I wonder if it is common that after the upgrade of the Satellite Pro U300 (PSU31E) of the BIOS 2.50 at BIOS 3, 70 - Win or 3, 90 - Win, do sleep modes and Hibernate the * completely locked laptop computer? *

  After the upgrade, when I try to enter sleep or hibernation, the laptop turns off the LCD and gets locked so it isn't help to press and hold the power button, open/close the cover, press Fn - F3 or F4 - Fn, the only way is to disconnect the power supply and wait until the battery runs down, or simply be very rough and * disconnect the battery *.

  While the Pro U300 is locked, I hear that HARD drive and fans are also swivel - as soon they were when entering standby or hibernation mode. Very ugly behavior - you can FRY your laptop with something like that. I thought that BIOS 3.70 was faulty but unfortunatelly version 3.90 also worthless.

  Furthermore, I can't yet understand why large (70% of the zip file) file of the package to upgrade the BIOS (3.70 and 3.90)... is the portable other flashers log file?

  Your ad, I understand that the screen does not wake up after its entry in the standby or hibernation mode.
  Am I wrong?

  I noticed that Toshiba has released a new version of the Intel graphics driver.
  At this time the update is 02/20/08 and the version is 6.14.10.4831.

  Maybe you should try to update the display driver too check to see if it would help to get rid of this annoying display problem

  I recommend to remove the old version of the graphics driver first, then install the new downloaded driver.

  Mate good luck

• Satellite Pro 4320: cannot use PCMCIA card after update BIOS 2.70

  Hello!

  I'm using the Toshiba Satellite Pro 4320 (SP 4320). With the very old BIOS (first) version 1.0, the system has worked well on LINUX (Ubuntu) and Windows XP. So I found the update of the BIOS (latest version on the toshiba Web site). I did update the BIOS version 1.0 BIOS version 2.7.

  Now, I can't use any PCMCIA card.
  Everything works fine, but I can't use two PCMCIA slots.
  The cards will be recognized, but the system says that there is a resource conflict.
  (WLAN/WiFi adapter) PCMCIA cards worked very well with the old BIOS version 1.0, but now it does not work.

  Windows XP says: 'conflict resource' and Ubuntu/Linux said after typing dmesg: "pccard gives wrong answer, for example."

  Please, help me!

  Someone got an older version of BIOS?
  My idea is to 'downgrade' the BIOS BIOS version 1.0 or version 1.x.

  I have to downgrade the BIOS to at least 2. 6.

  Bye,.
  Martin

  Have you tried installing WXP again using Toshiba Recovery CD?
  I mean it's so old model of laptop and I can't imagine that Toshiba will offer this update of the BIOS so long if there is a serious problem with it.

• Satellite 4100xcdt does not recognize HARD drive after update BIOS version 8.20

  My laptop is a satellite 4100XCDT with windows xp and I want to install linux.
  Have the cd bootable linux (tested on other computers) but laptop doesn't not boot cd shape so I updated the bios with version 8.20 from the toshiba support site.
  Tried the disks formatted 1.44 and 7.20 such as recommended in the manual of the 4xxx series. BIOS has been updated successfully

  Result: after pressing the switch of the usual screen Toshiba appears, after the disc hard led flashes for a few seconds then windows except modus menu appears. After I made my choice (all tried) a few seconds later (and hard drive led light) flashes a blue screen (not enough long to read the message) and the computer is restarted. When starting from a back bootable floppy, I can't reach the (cd rom) drives (hdd) C and D
  But in my opinion that Windows Save menu modus is called from the hard drive (so I think that the hard drive still works)

  Hello

  Well, in my opinion a part on the HARD drive or bootable partition might be corrupted.
  You are right, if the windows save mode appears therefore HARD drive has been recognized by the BIOS and the HARD drive is bootable.

  I think there must be something wrong with the data on the HARD drive.
  Something similar happened on my laptop several weeks ago. After you use the chkdsk/r, I was able to run the operating system again. But then I installed everything again.

  On the Toshiba page I found the companion disc.
  The accompanying disk is capable of detecting your CD-ROM drive on the
  Toshiba during the boot process. If you need access to your CD-ROM
  Hunt, then delete "rem" Word the following lines in the Autoexec. BAT
  and CONFIG. SYS on the accompanying disk.

  REM if exist toscd001 a:\mscdex D:TOSCD001 /M:10 (AUTOEXEC. BAT)

  REM device = a:\toscdrom.sys (CONFIG. (SYS)

  It may be useful

• Satellite A100: Error power USB from standby after update BIOS 5.20

  Hello

  I have problems of USB power since the upgrade my BIOS to 5.2 days on receipt of an email from Toshiba, advise the upgrade

  I got a 100 - 200 PSAA8E Windows XP Media Edition since the upgrade of the BIOS to 5.20 I get message error power but only when the computer comes out of standby

  The error message tells me that "a USB device has exceeded the limits of its hub port power.

  I have nothing connected to one of the USB ports

  I talked to guys tech at length to Toshiba, but they can't seem to explain or correct the problem - a same thought it could be a motherboard problem, but cut which like the timing is too coincidental to be something other than the upgrade of the BIOS.

  If anyone knows a fix, so I would be grateful - is - it possible to find a previous BIOS and roll back from 5.20

  I guess if it's the BIOS, then when they deliver another it will correct itself?

  Comments appreciated

  Phil

  Hello Phil

  Maybe again the stupid question, but I also want to know why you made the decision to do the BIOS update? Is there a particular reason or you just want to have laptop with the latest version of the BIOS.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?

• Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

  Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

  To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

  The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

  Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

  If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

  Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

• Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

  Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

  Laptop computer has restarted:

  1 Fireed power led,

  2 Powered hard drive for 2 seconds to turn it off.

  3. stops...

  No Dell Logo, no beeps, can't go in the Bios.

  Test LCD works OK.

  Remove the module of Ram, power on and listen to beep

  Pressing the END key and power for laptop has no effect.

  Any idea?

  Yes. I did it.

  Laptop have bios Phoenix.

  Phoenix Bios have restored the USB Flash procedure.

  This procedure to restore the BIOS:

  1. download USB flash less than 4 GB.

  2 format in FAT.

  3. get your flash update of the Dell store - xxxx.exe

  4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

  5 extracted copy of Bios.cap for the flash player.

  6. turn off the power to the laptop.

  Next 7,8 step may not be necessary but I did it.

  7 disconnected all perihpericals with battery and charger.

  8 disconnect the HARD drive

  9. connect the USB on the laptop on the right side.

  10 press and hold the END

  11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

  12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

  13. After finishing laptop restarts and worked well.

• Satellite A200 - Touchpad scroll function stop working after BIOS update

  Hello

  After that I updated the BIOS (drawn from the Toshiba site), the scroll function stop working. I can still click, move the mouse pointer, but can no longer navigate the touchpad. Relocation of Synaptics driver is not the problem. The strange thing is that the computer detects only my touchpad as standard pointing device (port: PS/2) device. "Graph of pressure" and "Moodpad" function also stop working and complain "this program requires a Synaptics TouchPad, and the Synaptics Pointing device driver.
  My computer is Satellite A200 PSAE0C-TR605C.

  Anyone know the reason?
  Thank you

  Danny

  Hello

  What operating system is installled and which is more interesting: what version of BIOS you have installed? Why I ask? Because there are 2 different BIOS versions, one for Vista (1.80) and one for XP (5.20) which means that when you Flash a BIOS XP on a computer with Vista installed then some functions do not work properly as the FN keys or the touchpad.

  If please check this out and make sure you have the appropriate BIOS installed.

  Welcome them

• iPad suddenly requested a password after update and allow a trial and then locks for 60 minutes?

  After update last night my iPad is suddenly asking a password (which was disabled before) and now provides that an attempt to get the good pw

  PassWORD or PassCODE? I've just updated me too and I think the title above says to create a password. If that's what you see, press Options to access code (just above the keyboard) then do not add access code.