Dev Simulator Alpha will not be in development mode

Similar Questions

• BB10 dev unit alpha has not started

  Hello

  BB10 dev unit alpha is not started. When I plug the unit with the charger it show only red lights are flashing. same thing happen since the last day. I plug the charger since yesterday afternoon, but the device is not started.

  My device is not started after one and a half day. Now, it started after the reinstallation of the OS and the upgrde to 10.0.6

• Computer will not remain in standby mode.

  I have a computer with Windows XP, about 5 years old who often will not remain in standby mode. After 30-45 seconds it starts again and the display shows again the office.

  Does anyone have a suggestion/recommendation what to do about it?

  Thanks, any suggestions would be appreciated.

  Hello JJLinker, welcome.

  The issue is likely caused by "Wake by " settings in your power options. This gives a shot:

  1. click on START
  2. right click "My computer" and select "Properties".
  "3. click on the tab"Hardware", then select Device Manager.
  4. expand the "Network adapters" category
  5. right click on each of the devices and select "Properties".
  6. on each, go to the tab "power management."
  7 turn off the checkbox "allow this device to wake...". ' and click on 'Ok '.
  8. close all windows and restart the computer

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Ultimate black screen with the living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86, but it will not install in safe mode

  have a ultimate black screen vista under contract with living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86 but it will not install in safe mode

  have you tried the manager used tasks related to bugs

  Msconfig

  Explorer.exe

  and have had no joy... Please heeeeeeeeeeeelllpppppp

  Hello

  It is the fix in case there are any information it helps.

  A computer that is running Windows Vista or Windows Server 2008 stops responding at a black
  screen early in the startup process
  http://support.Microsoft.com/kb/977675

  Microsoft - contact patch Support issues.
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  ======================

  Other troubleshooting methods that can help.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best option, but here are a
  few others.

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version (to do the system restore
  It only needs to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ============================================

  After the foregoing: a Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• BlackBerry 10 Dev Simulator Alpha uninstall?

  I feel a little embarrassed to ask this, but how to uninstall the Blackberry 10 Dev Alpha Simulator under Windows? There seems to be no functionality uninstaller for it... Is it just a case of delete the VM files that have been copied to the C:\Users\Pete\Documents\Virtual Machines?

  My laptop six year cannot run the virtual machine (no 3D acceleration support), so the Simulator is useless for me.

  Thank you

  Pete

  Hey Lester,

  Bryce is correct in his response that the Dev Alpha Simulator installer will extract just the Simulator BlackBerry10Simulator-Installer-BB10_0_04 to your virtual computers folder. Delete your folder C:\Users\Pete\Documents\Virtual Machines will remove the installation of Simulator.

• Failed to install Microsoft Flight Simulator. Will not pass the installation wizard.

  Failed to install Microsoft Flight Simulator, Version Deluxe 2010. I am running Windows 7 Ult 64 bit. The program will not install, it's an error that it cannot find the file. I tried everything, but it does not install. This is the full version of three discs.

  Following up on this question. I have install and it will go through the wizard of the insulation. Then, it will come with a large screen. He stays there and then says after 15 minutes. «Unable to launch vcredist_ * 86.exe.» I press ok and a error number "the system cannot find the path specified in 3. Press ok and then it states that the system has not changed except for... »

  I am convinced that Flight simulator is not intended to be run on a 64-bit computer that is very disappointing. I have a program which should install without all the aggravation I had to endure. If you run them 64-bit machines do not buy this product. I tried since it first came out. I feel at the moment where I get it going it will be a version dated date out. Wait until there is a version dedicated 64-bit, you will save yourself a lot of grief. I have an Asus dual core Centrino 2, 2.6 GB h. computer laptop with 4 GB memory. I install my DVD direct program. It worked when the computer is a 32-bit computer.

  Clive Ballantyne

  What finally worked for me when I tried to install MSFSX Gold Edition has been that I copied the disc 1 FS to my office.  Then I copied the contents of the FS 2 disc and put the files in the same folder.  When're asked you if you want to replace the files with the same name on both drives say no.  It seemed to work well for me when nothing else did.

  I haven't read of anyone doing this exactly, it's my own invention/workaround bit AFAIK. Hope this works for all of you who cannot make it work otherwise.

  System:
  ASUS G50v-t
  Intel Core 2 Duo Centrino 2, 2.26 GHz
  NVIDIA GeForce 9800 m GS 512 MB
  4 GB of Ram
  Windows 7 Professional 64 bit

• flight simulator 2004 will not load or run during hours of daylight Simulator, will ONLY during the hours of darkness.

  I've been using fs9 since 2005 and did not have any problem of an uninstall and the recharge could not or would not fix so far. I am running Windows XP Professional on a card, Gigabyte, AMD triple core cpu, NVIDIA 9400GT and 2 gig of ram graphics card. Last week so that on a flight simulated Auora Oregon in Livermore, California the program during the final approach simply broke back to high office as if the program had never been launched. The flight was at night and since then, the program will not allow a flight during the day (simulator time) it will allow selection of aircraft, flight planning and will start the loading of the field but will break back into high office again as if the program had not been launched. I rebooted fs9 several times as well as several other pieces of software (ultimate field real extreme weather events, mega city) but the problem persists. NO error messages are given or shown. Other than this problem embarrassing and extremely embarrassing performance of the software is superior. ANY THOUGHTS ON THE ISSUE?

  Hello randams,

  I suggest you do a system restore on your computer, choose a restore point when the Flight Simulator was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next (choose are the restore time when it was working fine).

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  If you still have the same problem, I suggest you post your question in the Forum of Flight Simulator, which is a forum dedicated to Flight Simulator:

  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Model # 860-180 st: computer will not go to standby mode

  I just got this computer HP, model # 860-180 st, not even a month, "sleep" mode was working fine when I got it, but now it will not enter sleep mode. I checked everything in Control Panel, power options, so I don't know what the problem is. People of the idea?

  Jay_101 wrote:
  

  Greetings,

  Also check out tips found on thissite. She aims to win 8.1 but will also help to win 10.

  First generate a report of power. This will tell you which prevents the day before.

  See you soon!

  Hello Jay_101,

  Thanks for the link, I found what was preventing the computer in standby mode. It was the srvnet thing.  This link has all the tips and trick to solve this problem.

  I owe you a lunch.

  I contacted the HP Support by phone, the call is routed to the India, where else? The guy wanted remote access to my computer, I said no way Jose. These types of support for HP in India are unnecessary. All he wanted was Remoting to my computer, since I refused he won't talk to me more.

• Laptop will not go into sleep mode

  Mode, Sony laptop Vaio VGN-FE855E
  Intel centrino Duo 1.67 Ghz
  2 GB RAM 667 Mhz Kingston
  120 GB HDD
  Mobile Intel 945 Express Chipset Family
  All the latest drivers as of April have been installed on the hardware.
  with Windows Vista SP1

  After receiving the last windows update for Windows Vista Premium, when you try to enter standby the computer hangs and will not enter sleep mode.
  Before reveiving updates he managed to switch mode sleep without problem and did every time. It will enter is no longer waiting for any means.
  I tried windows backup and Restore Center. After you select an older version before April 12, 2009, he was able to enter standby mode once more. Only after that the new updates, it was uninstalled had been relocated was not able to enter standby again.
  Initially, the computer starts to enter standby by closing the form. Then it goes weird after that, by the computer itself (which he never did before) inhibition and then it just hangs and the power light will not go to the flashing red indicating standby remains just green, who is running.
  The Hard drive is still spinning and accessing the hard drive very fast and light second every two seconds.
  When any key on the keyboard is hit the computer restores the sound itself and a sound through the speakers, which he has not already done. It then the screen turns on and brings the computer to lock screen / connection of the computer. I am able to log in and use normally.

  Hello, Justin

  Standby is activated in the Plan of high power Performance?

  You can check it out by going in the Power Options, click on change Plan under High Performance settings and check the computer put to sleep. If this option is enabled, click on change advanced power settings click on [+] Multimedia settings, when sharing media and change the setting to allow the computer to sleep.

  Let us know if that helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Brand new Aspire XC - 603G (ACX - 603 G-UW31). Windows 7 will not install in Legacy Mode

  Hello

  I am trying to configure a newly purchased office of Acer (Aspire ACX - 603 G-UW31), who has installed Windows 8.1, for my mother who cannot grasp the steep learning curve of Windows 7 to Windows 8.

  I have a licensed copy of Windows 7 x 64 on DVD, and even after the SecureBoot mode off then launch MSC forever and then starting with F12, by selecting the DVD drive as a boot device, Windows will not install correctly.

  The very first steps of the configuration are very well, it is, I'm asking the press actually starts to any key to boot from the DVD, Windows Setup loads some files, but the problem comes when the installation of Windows. I get a STOP error to the ASF with the message "The BIOS in this system is not fully complaint ACPI." There is no BIOS update for this model. That's the traditional way...

  Any ideas?

  Thank you, Nick

  

  All,

  I would like to announce, we have released an update of the BIOS that supports the element of 'Throw the CSM' in the BIOS Setup menu. Please visit http://www.acer.com/worldwide/ -> select your region-> click Support-> drivers and manuals-> select your product and then download the version of BIOS released on 15/09/2014 (or later version).

  Please be aware due to material limitations when MCS-mode you may experience some audio issues HDMI.

• HP dv6-6b51nr, will not start in safe mode. pls help

  Thanks for any help.

  I am trying to start my laptop in safe mode by pressing f8 at startup. but I got only a black screen then the laptop starts beeping, which will not stop until I force shut down the laptop.

  Seems something wrong. Help, please.

  Thank you.

  If you are still able to start a normal Windows there is a work around.

  In Windows, search programs and files box, type "msconfig".

  Select the Startup tab and choose start as in the image below. Now, restart the laptop and you should start in Windows safe mode.

  

  Don't forget to go back into msconfig later you will start up in the normal Windows installation again. If you forget to do this, it will always start in safe mode.

  You do not specify what operating system is installed in your laptop. The procedure is valid for Windows XP, Vista and Windows 7.

• Vista will not start even in mode without failure or will start up repair help

  Hello everyone,

  I've been many problems with my OS recently (Vista 32 bit business) and decided to reinstall (it was really a last resort). The relocation went well, but in the end, he got the black screen with the extended cursor and didn't budge (I left it overnight).

  I forced to restart at the end of the day, and now it won't start, it just says loading windows and displays the logo of loading, but will not charge.

  Safe mode will start to load the drivers, but then freeze, leaving a permanent list of drivers and a "Please wait".

  I tried to boot from the Vista startup disk, who works the Startup Repair very well and running. The first time, he said he found problems with the boot files automatically and then asks me to click on "repair and restart. Once I do, nothing changes, it's always the same.

  I tried to run a further startup repair, but it does nothing, just scans and scans and scans... but can't find anything in the newspaper (it is not passed the crawl log entry).

  I can access the features on the disc to start very well, so I ran guest and drive a DSKCHK (read-only), but again it froze in the third part.

  As far as I know all my hardware works fine, and a diagnostic scanning don't tell something abnormal.

  ... any ideas?

  Enjoy your time,

  Chris.

  Hi Chris,

  This resembles the faulty Ram or a hard drive does not properly, even if the systems on board diagnosis cannot capture an error!

  Of what you sayed I recon, it is a hard drive error more defective ram, try rerunning DSKCHK and see if it stops on part III, once again, if the fact, its probably your hard drive! Maybe someone else has a similar thought?

  Hope this helps with your problem.

  Jon

• Windows 7 Professional x 64 will not install in AHCI Mode

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-7-ultimate-x64-will-not-install-in-AHCI/282886d4-a614-405f-aa33-f484e7ce5e6d?page=2

  I'm having a similar problem and wonder what the final steps / solution?

  When I tried this with Windows 7 Pro 64 bit does not recognize the H.D.

  I also read KB and think it doesn't look good for the installation of the driver.

  If must go to AHCI at all and what I said is that AHCI mode is for the correct entry for drivers on the disc. and if it raises a question?, if it is impossible to install windows initially in AHCI how is that windows has been installed correctly at all?

  My system is going to be the motherboard Asus M5A99X, Six cores AMD 1090 t., 12 GB ram, Windows 7 Pro 64 bit.

  I have also had similar problems with my Asus M4A88TD-V EVO/Usb 3.0 is the original built the motherboard and is the motherboard present until I have find this and am hesitate to disassembly and reconstruction with the new M5A99X.

  Here's what I posted on my Asus Forum;

  http://VIP.ASUS.com/Forum/view.aspx?ID=20120422012743839&SLanguage=en-us&board_id=1&model=M5A99X%20EVO

  I just bought this new M5A99X now (previous motherboard has been renovated and has no sound, no disk support, from Newegg.com) from Microcenter and I hesitate to start tearing down and rebuilding of my custom version until I have find this AHCI configuration.
  On my previous motherboard, I tried this and it do not see the HARD drive.

  It's confusing, because if one thing works another doesn't 0_o

  I read the http://support.microsoft.com/kb/922976 on AHCI and;

  What is appropriate for the correct configuration? SATA and AHCI first, then if the AHCI drivers are not loaded, then again on AHCI (immediately) and then keep in AHCI or sata and SATA when?

  When I read it; http://support.Microsoft.com/kb/922976 it seems to suggest that I have to install mode SATA, then REGEDIT. problem is that if my computer falls down before that I still have the chance to do it then what?

  I do not currently make a Raid Config just a normal installation on a Seagate beracutta 2 TB 6 GB/s hard drive.

  I also posted on Microsoft Technet http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/87adffb0-e498-4834-abca-cae6905492e2

  I have rebuilt since the system and it was easier than I thought that the new motherboard was set as the default AHCI. When I installed windows there is a driver load option and clicking while I was able to load the AHCI driver from the DVD player. the old motherboard there are a lot of other steps and it's more than the new motherboard diffacult. It was so much better in my other post on the forum, and thanks to these people http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/87adffb0-e498-4834-abca-cae6905492e2 response

  all other replies to this post were of no use to me and so I hope that I have helped those who were also trying to understand this. THA post above that says he suggested to install windows 8 and this post has nothing to do with windows 8. forum message header said WINDOWS 7! where the reason why I make my answerts of the technet forums instead! Trying to sell a BONE? Im just trying to get my work and try to sell me a new OS is not going to happen with these existing answers.

  I don't have to wonder why, in one of the previous answer, so-called, was told not to post my other post on the forum. but there again question me answers in this forum.

  There are people who are eager to build computers and try to understand this thing of AHCI driver.

  on the old motherboard, it was not so easy to do. I wonder why Microsoft has a processor intel AHCI driver built in? and not as an AMD one to be recognized by the operating system.

• WebWorks + bbui.js Dev app Alpha does not respond to tap

  Hi guys

  I just installed my webworks + bbui - 0.9.4.js app on my dev alpha.

  When I run my application, the first page that appears to me is login: a text field for email, a password and a "submit" button.

  But when I type on items no answer by dev alpha, not keyboards appear and present the button does not work.

  If I test this app on ripple through browsers it works fine

  Any ideas?

  Here is the html code of the page:

  
  

  Use your Producteev.com account

  
  

  
  

  
  

  
  

  E-mail

  
  
  value = "" id = "login_email" size = "25" > "
  

  
  

  
  

  Password

  
  
  value = "" id = "login_pwd" size = "25" > "
  

  
  

  
  

  
  

  
  OnClick is "document.getElementById('buttSubmit'). Click () "> Connect"

  
  

  
  
  
  
  
  

  TNX

  MY

  If you are using the most recent operating system on your Dev Alpha, it seems that you may be packing with a former SDK.

  Make sure you use 1.0.3.8 SDK or this problem will occur.

  You can download the new SDK form here, https://developer.blackberry.com/html5/download/