DevCon unrecognized

Similar Questions

• Tecra S10 - unrecognized Usb device

  Whenever I plug the mouse usb Tecra S10 - 11A I get the message "unrecognized (or due to a malfunction) Usb device". Then, after several times of rehearsals to plug / plug everything is OK. But after each reboot, I must repeat plug/plug in mouse for several times.

  Now, I'm on Vista, but it is even on Windows 7 or XP.

  Is it possible to solve the problem?

  Thank you!

  Hi gordan84,

  Have you installed a 3rd party software/driver for the external mouse? If Yes, you should remove it.

  This happens with other USB devices like printer too?

  Maybe a BIOS update could be useful, you can download it on the Toshiba site.

• Satellite A100-233 - error that unrecognized USB device

  I have a problem with my USB ports, they where working fine but all of a sudden they start gives me error that unrecognized usb device. I tried to reinstall XP but still the same.

  Can someone give my solution to this problem?.

  Hello

  You have yellow exclamation marks in Device Manager?
  I had a similar problem with the USB ports a few years ago. I removed the ports in Device Manager and reboot the laptop. The USB ports will recognize again.
  Furthermore, I reinstalled the latest chipset driver and everything worked well.

  The latest chipset driver download on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• Uint64_t unrecognized statement.

  When I declare the variable as uint64_t or unsigned __int64, Labwindows gives me error messages when compiling.  It says unrecognized statement.  I have included stdint.h and userint.h

  What is missing?

  What is missing:

  -What version of the CVI are you using?

  -you have the Option of Configuration "Buld with C99 extensions" turned on?

  -sample code

  For me, using CVI2013SP1, both

  uint64_t test;
  unsigned __int64 test2;

  works without error...

• Windows ME error after installing an Ethernet network card: "DEVCON. EXE FILE IS LINKED TO THE LACK OF EXPORT SETUPAPI. DLL:CM_FREE_LOG_CONF_HANDLE ".

  I installed 32-bit network card Ethernet 10/100mbps in a tower of E which has Windows Millennium Edition.  When I tried to run the C/D that came with it I got the message, "DEVCON. EXE FILE IS LINKED TO THE LACK OF EXPORT SETUPAPI. DLL:CM_FREE_LOG_CONF_HANDLE' in the network configuration panel it lists the network adapter as a TCP/IP Protocol, but could not get on the internet. In the past, the only way this computer connected to the internet was through a dial-up access. Any help would be greatly appreciated.

  original title: problem of setting up a network of maps by ME

  Hello

  Windows ME (Windows Millennium Edition) is a Microsoft product.

  There is more support available for Windows Millennium Edition.

  
  Reference: end of support for Windows 98, Windows Me, and Windows XP Service Pack 1

• Cannot use mobile mouse 3500 "unrecognized usb device".

  Original title: mobile mouse 3500

  Mobile mouse 3500 has malfunctioned. "unrecognized usb device". This has happened once before. It seemed to correct itself when my computer is doing a weekly update. I did an update manually, but the error has not corrected itself. This mouse is only a few months old.

  Hello

  What operating system do you use?

  Step 1: Try to run the fix it tool to the article below and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Update the driver for this device using the audit and the Device Manager.
  Reference: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  Step 3: Uninstall and reinstall the driver and the software for this device.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  http://www.Microsoft.com/hardware/en-us/downloads

  I hope this helps.

• Files which are required for Windows to run properly have been replaced by unrecognized versions

  I get this window popping up that reads, "files required for Windows to run correctly have been replaced by unrecognized versions.»  To maintain system stability, Windows must restore the original versions of these files.  Insert your Windows XP Professional CD2 now. "The problem is that I'm not running XP Professional.  I am running XP Media Edition (do not know what version - when I look at 'System' in the control panel it says version 2002, but the OS disc that came with my computer says version 2005 with update rollup 2).  In any case, I only have an installation disc, and when I insert it, the computer tells me it's the wrong disc.  What should I do?

  God help us all...

  Is the CD you have an XP bootable installation CD authentic or some kind of restore CD provided with your system (they are not the same thing).  If it's a CD of Windows, this Service Pack is on the CD?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  If the system works, what do you think might have changed since the last time it did not work properly?

  What is your Service Pack installed?  If you are not sure, do the following:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the results here.

  There will be some personal information (such as the user name and the name of the system), and what appears to be personal information for you, simply delete the personal information of the pasted information.

  When you see a message like this:

  Windows file protection
  Files which are required for Windows to run properly have been replaced by unrecognized versions.  To maintain system stability, Windows must restore the original versions of these files.

  I hope that you are curious to know what is the file and when you know that, you can decide what to do about it.

  You must click Cancel, and then click Yes to keep the file, then you will have an event to watch which will tell you what the problem is the file.

  Search where you sign in to see what is the name of file system Viewer, then decide what to do.

  The event will look something like in this example:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64005
  Date: 10/01/2011
  Time: 14:41:56
  Description:
  The protected system file taskmgr.exe had not been restored in its original, valid version because the Windows File Protection restoration process was cancelled by user interaction, user name is Jose.  The file version of the bad file is unknown.

  When you know what the file is, you can decide what to do about it.  There are probably other copies of the files on your system, or you can get the files from another source.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  eventvwr.msc

  Click OK to launch the event viewer.

  Check your event observer system log and look for a proposed Windows file protection event.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  P.S. Let us know how you go with these Microsoft KB article suggestions.

• I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions.

  Original title: Windows File Protection Pop Up Message.

  I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions. To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition CD-Rom now. The problem is that I do not have this CD and need a way to solve this problem. Thank you

  Hello

  1. have you made any hardware changes or software on the computer before this problem?
  2. when exactly you receive popup?

  Run SFC scans the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• "The backup file contains unrecognized data and cannot be used.

  Original title: - what are MS provides a BKF recovery tool? "The backup file contains unrecognized data and cannot be used.

  I'm trying to restore BKF files created by NTBackup.exe after the crash of a hard drive running XP Pro. The new hard drive is the same brand (WD) goes into the same computer Dell Inspiron and the same OS. No catalog file is available and trying to recreate the NTBackup recovery gives an error message.  No catalog cannot be created for many, but not all of my backup BKF files.

  I do not consider the solution of SysTools $89 for a large part of the answer. This problem is not uncommon and I hope MS has or can tell me a free tool to allow me to restore from any of my BKF.

  Thank you.

  You can take a look here: http://www.fpns.net/willy/msbackup.htm#NTBKUP

  I have no information other than what is on the web page.

• Format XP Microsoft JET Database Engine error 80004005 unrecognized database would be...-

  XP Microsoft JET Database Engine error '80004005' Unrecognized database format would be... -Is a message I get. Don't know how to fix it?

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. He would be grateful if you could answer a few questions to refine the question.

  1. Once you get this error?

  2. are you aware of changes to the computer before the show?

  3. you use ActiveX Data Objects (ADO) or ODBC to connect to a Microsoft Access database?

  4. This error occurs when you run a specific program or out of order?

  5 are logged as administrator?

  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »
   
  See this link for more information on:
   
  http://support.Microsoft.com/kb/555375

  Provide more information about the issue so that we can help you.

• Windows XP Home Edition SP3 (error: files which are required for Windows to run properly have been replaced by unrecognized versions)

  I get this message: files which are required for Windows to run properly have been replaced by unrecognized versions.  To maintain system stability, Windows must restore the original versions of these files.  Insert Win XP SP3.  Please help - I can't find the disk.

  If the original xp installation disk had sp2, files for sp3 are not on it.

  on the right side of this page is a link for sp3.

• Unrecognized peripheral DVD for burning CDs

  I have a Compaq Presaria SR1220NX, XP SP3.  I went to try to burn a piece of my ITunes on a CD using my DVD disc drive, because my CD had to be purchased has been damaged.  But I have not found a kep disc burning software to send a message.  I uninstalled and installed ITunes again. Same thing.  I uninstalled 7 burning software and improved SonicNow-10;  always say "burnig unrecognized currency.  I tried Burnaware, CDXP burner.  So how any burning software that I use, it will not be recognized the dvd drive to burn.  I went into Device Manager, no error message or anything for the reader.  Tool tried PC Doctor, everything going on.  Uninstalled the disk driver.   I don't know what else to try to get to where the dvd player will be burn to a cd.  Thanks for anyhelp.

  Hello

  Method 1:

  First of all, I suggest for the link and try to run the fix it:

  Your CD or DVD drive cannot read or write media

  Method 2:

  I suggest you to refer to the article and see if it helps:

  iTunes for Windows: optical drive is no longer recognized, or "Disc burner or software not found" warning after installation

  http://support.Apple.com/kb/TS2308

  Let us know if it helps.

• Windows Media Player extension unrecognized .vro

  If I try to play a DVD made House on my Windows Media Player 11, I get an error message that indicates: "unrecognized extension .vro.

  How can I fix this?

  VRO files come from certain types of dvd recorders.
  The system of MST files on a dvd is VOB.
  To get WMP to play, you could try importing the vro on the hard drive and then renamed to .mpg.
  Unlikely to work, but the power.

  Or, you can convert in the std .vob .vro files by using one of the many free conversion tools. Again, you would need torus tos these files on your hard drive.

  You have any other dvd playing software installed, that things like powerdvd, windvd should also read the files, otherwise I would use a player like VLC of VideoLan player, install once and should play one of your discs .vro.

• Is it possible to install a loopback adapter through cmd (without devcon) orders?

  I would like to do a method to automatically install a new network adapter in windows xp. It should work with commands cmd and if possible without the devcon utility (you want to include in a batch file)

  On my research I came across of the netsh command, but for me it seems that he could only set up and existing but not install a new card (is that right?)

  I look forward to each response pointing me in the right direction.

  Greetz

  Hello

  See the following articles that might help you.

  Install the Microsoft Loopback adapter
  http://TechNet.Microsoft.com/en-us/library/cc708322 (WS.10) .aspx
  The DevCon command-line utility functions as an alternative to Device Manager
  http://support.Microsoft.com/kb/311272

  If the items above were not useful and then post this question in the TechNet community.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• I get a message that says, "files required for Windows to run correctly have been replaced by unrecognized versions...» »

  Original title: Windows unrecognized files

  I get a message that says, "files required for Windows to run correctly have been replaced by unrecognized versions." To maintain stability, Windows must restore the original versions of these files. Insert your Windows XP Professional CD2 now. "I don't have this CD.  What can I do to fix the problem?

  Hi Kathy111,

  ·         Exactly when you receive this error message?

  I suggest you to perform the auditor of system files on the computer.

  You may consult:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Note: if it asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:

  http://support.Microsoft.com/kb/900910 (valid for Service pack 3)

  Hope this information helps.