Device HP color laserjet cm1312

Similar Questions

• Windows 8.1 does not speak for Color Laserjet CM1312

  After you have installed windows 8.1 my Color Laserjet CM1312 printer and pc are not communicating.  Tried several drivers update. They do not install. What can I do more?

  PS this post and his response were separated from the other thread and edited its about. -Hp moderator of the Forum

  We would need to see an error or a Setup log message before we can give you some useful suggestions.  Setup logs is normally displayed somewhere as C:\Users\username\appdata\local\temp with a name of the hp type... install... Newspaper.  If you can find one of those that we then validate and share so we can review and tell you what is happening.

  Otherwise, you have to do your best to clean your computer and start again.  I assume you mean that you upgraded the operating system of the PC which worked previously, not put in place a 2nd accidentally broken computer connect to the 1st old PC.  If this is the case then it is more than probably a file conflict somewhere on the hard drive that needs to be cleaned before installing the new drivers.  I would suggest wiping the machine everything related to the HP printer, starting by the devices and Printers window, the properties of print server and driver tabs and the C:\Program Files directory.  Once all old Referances are removed you should have a good shot at a successful installation when you use the latest software Win8.1 of http://support.hp.com.

• HP Color Laserjet CM1312 / Windows 7 / Microsoft Office Word 2010-> black and white text only

  I bought a HP Color Laserjet CM1312 and plugged on my 32 bit Windows 7 PC. Of course, I downloaded the newes of HP drivers. Then, I wrote a text in Microsoft Office Word 2010. Parts of the text in red. When I printed this text, all the text was black and white. No color.

  Also, when I print PDF documents with colored text or grafics, it is printed in black and white.

  When I include an image in color in my word document, then the image is printed in color, but not the text.

  How can I solve this problem.

  Thanks for a quick reply.

  Erich

  The problem has been resolved with the HP PS universal print (v5.1) printer driver.

  After several hours of a kind of obstacle course, I come to the conclusion that HP is

  wonderful printers

  but poor software .

• HP Color LaserJet CM1312 nfi no print only one page (document)

  Hi all.

  I'm in big trouble with Color LaserJet 1312 nfi (on 2 PC). Printer still print ONLY a single document (regardless of the number of pages) that I can't continue. I have to restart computer or the user to login and I print a new document. Scan OK.

  PC config:

  Windows 7 x 86

  connect via the USB port (but LAN made the same mistake)

  PCL6 driver

  I tried:

  reset to factory default

  the latest firmware update

  connect via LAN instead of USB

  Print via another PC (printer sharing)

  connect the printer to the other PC (USB, LAN)

  install the drivers of PCL5

  turn off Mopier mode (not available)

  Win XP - OK (printer so no problem)

  Any ideas?

  Thank you.

  Hello.

  Installation new version Universal Print Driver for Post Script - no change.

  I tried a thousand ways and WE work:

  install driver of the old school-HP Laser Jet III from Windows Update.

  I hope it helps someone...

• installed hp Color LaserJet CM1312 nfi MFP does not print

  Our print has been installed several times and uninstalled but no impression goes out. Printing is preparing, and Microsoft Word gets stuck while printing. Our software is Vista.

  Please let us know what can do with her w

  Download the latest drivers, software and firmware (make sure you get everything) for your printer and your version of Vista on the HP site (do not use the didk supplied with the printer and do NOT use anythinng of Windows Updates.

  Here' year HP article on how to add printers to Vista. http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=115&prodSeriesId=3558902&prodTypeId=18972&prodSeriesId=3558902&ObjectID=c00784183 Did you follow the instructions as written in order to present th?  Otherwise, reinstall the printer (actually, reinstall iin anyway just to make sure it's done).  I suggest that you do so with technical Suport HP on the phone with you http://h50203.www5.hp.com/hpisweb/customer/HPInstantsupport.aspx?&cc=us&lang=en.

  Here's a page on the HP site dedicated to your printer. http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3558902&submit.y=6&submit.x=12&lang=en&cc=us, you will find a useful part it.

  They also have a forum like this for their products at: http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413 where you can ask these questions and get responses from people who know the printer.  I'd give it a try - they can offer a solution person considered otherwise.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Color LaserJet CM1312 MFP

  I have computer with Windows 64-bit operating system, and it will not load the driver for the printer above. It is said that the softer printer works with Windows 2000, Windows XP, Windows XP 64-bit, Windows Server 2003, Vista, Vista 64-bit. I was able to install it on my laptop that works with Windows 7, 32 bit. Is 64 bit that very different?

  [Moved from comments]

  Hi Ed Wink,

  Exactly how you are trying to install the driver? Is it with CD or online?

  It seems you are trying to install an incorrect driver for the device.

  I suggest you to refer to this article and download the printer driver for Windows 7 64 bit.

  Reference:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=CA&prodNameId=3558903&prodTypeId=18972&prodSeriesId=3558902&swLang=8&TaskID=135&swEnvOID=4063#1130

  See also:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=CA&TaskID=110&prodTypeId=18972&prodSeriesId=3558902

  Hope this information helps. Response with status so that we can help you.

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• HP Color LaserJet 4550: HP Color LaserJet 4550 PCL XL error

  I use this printer for years.  It works beautifully.

  Windows 10 has just done an update & the printer driver disappeared.  I use this printer with a HP Jet Direct J4135A usb card.  Now any driver or what I do I try to install or use, I get the same error message.

  I am trying to use the printer driver's upd-pcl6 - x 64 - 6.3.0.21178.exe.  The printer driver appears in the settings & is by default we & they say that everything works correctly.

  Can you help me please?  I don't want to go out and buy another printer.

  PCL XL error

  Subsystem: KERNEL

  Error: UnsupportedProtocol

  Operator: 0x0

  Position: 0

  Found the solution for everyone that might have this problem.

  Just right click on the printer icon in the Device Manager and select printer properties / Advanced / change & driver driver HP Color LaserJet 4550 PCL6 ranking to HP Color LaserJet 4550 PCL6 and click OK.  That's all there is to it.

  Now, it will work with USB (HP Jet Direct J4135A Card) that is not supported, instead of just supported network.

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

  Hello

  I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

  When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

  My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

  Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

  the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

  In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

  I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

  My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

  Thanks in advance for your help,

  Lorenzo

  Hi Lorenzo,.

  To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

  You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

  Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

  http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

  If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Kind regards

  Shlomi

• Can I solve the problems of alignment is to have my Color LaserJet CP1518ni? Red will not line up.

  Can I solve the problems of alignment is to have my Color LaserJet CP1518ni?  Red do not line up, I installed the latest updates, etc.  Calibration does not help.  The printer is only a few years old.  What gives?

  Hi threre, I just work on HP CP1518ni a client with this same alignment problem as most of you are describing. I went through some process and I think I found one that works... If all goes well it will work for

  You too.

  Things I tried before hand... also this machine has all the toners brand HP 90 + life on each of them.

  -Calibrate - has not fixed the problem (tried once)

  -reset the NVRAM - did not problem

  -removed and inspected print cartrides (no problem found), re-installed - fixed no problem

  The 'fix '...

  First, go to the HP website and download the firmware, make sure you only select the right operating system

  you are using. (for me it was Windows XP) Also the requirements of course read, I think you have to

  have with XP SP2 if it perhaps questions, always read the instructions before doing the firmware.

  Here is a quick link to the CP1518ni...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3422472 & LC = on & CC = US & DLC = in & lang = to & CC = US

  Then, assuming you have the appropriate printer driver installed, double-click the utility you just downloaded and select the CP1518ni from the drop-down list. Now, press the button 'send the firmware '. It will be

  Take a few minutes so just let it do its thing. After that she did try to print something, for me it was NOT fixed.

  Now you want to calibrate the device, maybe 2 or 3 times, on the control panel scroll to the right until

  you see "systemsetup" press ok and scroll to the right again until you see 'print quality' and press ok.

  the first item in this menu is press "calibrate color" ok, now he's going to say 'calibrate now' and press ok one

  last time. It will start the calibration process. Then he did print something new to see how he does.

  for me I had to do the calibration process twice before the quality was normal again.

  Good luck, hope this helps some, I read that some printers still presist even after this process.

• Driver for HP Color LaserJet MFP Pro M PCL 6

  64-bit driver for HP Color LaserJet Pro MFP M477 PCL 6: I have one of these printers, which is able to print double-sided automatically.  The new driver (64-bit) will not accept when I switched to a new laptop, manual duplex printing.  Does anyone else have this problem?  I updated the driver, but the problem persists.

  I managed to find the solution... it is a lot harder than I imagined composed I don't remember clearly how I found it.  But I think it's what you do... Use the control panel to get to the devices and printers, right-click for properties of the printer, then select device settings, then select installed in the duplex unit.  Yes... complicated.  How the average dumb guy like me never to solve such a problem?

• Color LaserJet CM6040 MFP: A3 manual duplex Duplex on Color LaserJet CM6040 MFP taken in charge?

  Hello

  I hope someone can help to answer this question. I am trying to print a newspaper on the double-sided A3, but I get no prompt to reinsert the paper to print on the other side, as I do when I print A4.

  The parameters have been triple checked and still the A3 prints out sequentialy on one side.

  My question is the Color LaserJet CM6040 MFP support manual duplex Duplex A3?

  Thanks in advance

  JEAN

  The CM 6030 / 6040 CM User Guide manual States:

  «Duplex printing: provides printing automatic duplex (print on both sides of paper).» The range of paper size for automatic duplex printing is 175 to 320 mm (6.9 to 12.6 in.) x 210 to 457 mm (8.3 "to 18"). Media weight range is from 60 to 220 g/m2 (16 to 58 lbs.)"

  If you use manual duplex because the printer driver does not offer the automatic duplex option, it may be that the driver does not know that a duplex unit is equipped.

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• Unable to print on Windows 8 with Color Laserjet 1600

  I installed DOT4x64.msi on my new laptop HP Windows 8, since this seems to be the only average current to connect my Color Laserjet 1600. The printer will now appear in the section "Devices and Printers" Control Panel.  But when I try to print something, I get an error message that says that I can't print to the printer. I spent nearly an hour on the phone with HP support with no resolution - in fact, after all this time, I was told "this Department does not support this printer!.» Any ideas on a solution here? Thank you!

  PS - I initially posted on a different picture, I hope someone here can help.

  For this device, the driver of windows 8 will not release until the end of January. Please bookmark this site and refer to it for more information up-to-date.

  Can I 8 supported for LaserJet printers

  In the meantime, drivers windows 7 should work for this device.

  Color Laserjet 1600

• HP Color LaserJet M553: M553 - cannot print two-sided

  Hello

  We have a new HP Color Laserjet M553 (B5L24A) which is not allowing us to automatic duplex.  He is currently runinng via a Windows 2008 R2 server and is network connected via IP static on the Ethernet cable.

  I tried several steps of troubleshooting so far:

  -Several including UPD PS 6.0 5.8 PS, PS 5.5, PCL5 printer driver

  -Several print on print server objects

  -Confirmed the 'device settings tab' has the duplexer enabled on the local print server and print objects

  -Updated firmware for the last datecode 20150731

  -Tested printing from several applications, word, outlook, pdf, internet Explorer, textfile, etc...

  -The same problem happening to all connected users

  The printer accepts orders for manual, automatic duplex printing simply cannot.  No error messages didn't report on Panel print, printer, client or server.  Trying to get your hands on a 2nd M553 so that I can confirm a double problem or not.

  Feels like a problem with the firmware where he does not understand the command duplexing automatic normal or did not recognize the duplexer is installed.

  Any ideas?

  Your model is not the two-sided model.  The duplex model is B5L25A and will say about this M553dn not M553n who is your model.

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi