My message to my wifes Stop iPhone

Similar Questions

• My wife's iPhone rings when I get a call on iPhone mi... How can I stop this?

  My wife's IPhone sounds when I get a call... How can I stop this?

  Sounds like you are both connected with the same ID to iCloud. If this is the case, on both devices, go to settings > phone > call on other devices and which turns off.

• my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  Hello

  1 have you made changes to your computer recently?

  2 are you able to access the Internet through an Ethernet cable?

  I suggest you to follow the steps in the link and check if it helps.

  Windows wireless and wired network connection problems

  I hope this helps.

• After my wife 5 iphone update ios 10.0.2, ringtone sounds is more when a call comes in.  What should I do?

  After the update my wife 5 iPhone and my iPhone 6 ios 10.0.2, we met problems.  His phone will not ring when a call comes in, and my phone does not sound an alert when a message arrives.

  Hi MikeDallos,

  I understand that after your wife 5 iPhone update and your iPhone 6 the new iOS, you both know questions in regards the phone doesn't ring do not or may not alert you to the alert notifications when you receive a message. I use my iPhone all the time and I count on the possibility of having my phone alert me for incoming calls and messages. We'll see what we can do.

  The first thing I want you to do is to restart the two iPhones. Make sure that your wife's iPhone has the ring/silent switch on mute.

  Restart your iPhone, iPad or iPod touch

  Here is an article that goes on measures to be taken for this issue:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker

  For your iPhone you did not give a warning sound with message notifications, you'll also want to review this article as well:

  Use the Notifications on your iPhone, iPad and iPod touch

  Please tender back if you still have problems.

  Have a great day.

• How can I get the message from thunderbird to stop coming when I opened my email?

  How can I get the message from thunderbird to stop coming when I opened my email?

  Press the alt key to make the call of menu bar
  Select Tools-Options-general
  Disabled the Start Page

• trying to get my messages text passed between my iPhone and iPad

  I try to get my messages text passed between my iPhone and iPad.  The phone asking me to enter the 'code' shown on my iPad.  Howeve, no code appears.  How should I proceed?  Very frustrating!

  < re-titled by host >

  Both devices must be signed with the same identifier Apple and the devices must be unlocked for the code appear. After checking both are true I suggest you try a reset (two aircraft): press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost. Then try again.

• Birthdays don't no projection in the calendar on my wife's iPhone

  In the calendar on my wife's iPhone, show no birthdays. The birthday calendar is active. Show on the iPad to my wife, birthdays. I checked and compared parameters three times now, but I can't understand why not to show birthdays. On my iPhone and iPad (and iMac) birthdays are presented.

  -Synchronize us contacts via iCloud

  -My wife synchronizes its own calendar using iCloud and I also

  -My wife has an iPhone 5s and an iPad 2

  -J' have a 5s iPhone and an iPad 2 Air

  I forgot something?

  Hi lexvo

  Another thing to check is Contacts. Birthdays come from the Contact info.

  Is there a birthday entered for the contact, and are they are synchronized?

• Message stuck in the Outbox iPhone 6 s more than 128 GB

  I have a message that's been stuck in the Outbox for weeks now. I tried to put the phone in airplane mode and I'm still getting the black and white pinwheel and impossible to delete the message. I have an iPhone 6 s more than 128 GB.  How can I remove this message that is slowing things down?

  Try resetting your e-mail account. First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. Then go to settings > Mail, Contacts, calendar > find your e-mail provider and click on the account. On the next page, delete the account. Then perform a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Then go to settings > mail... and to add the account.

• After the update to the latest version of iTunes, it includes the error message 'Push Apple has stopped working' and ITune could not be started

  iTune cannot be started on Win 7 after recent update with error message "Push Apple has stopped working"

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?

  I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?

  Does anyone else have this problem?

  It often happens when the screen times out and goes to the lock screen, when I connect to my phone that the error message is re-appeared?

  I have the same problem!

• Omen of HP 15: Wifi stop working. Win10 shows only a single network and it connects to the WiFi

  Hi guys,.
  Since a few days my wifi stopped working.
  If I click the Wifi icon it shows only a SINGLE NETWORK (two maximum), but not mine!

  

  And I live in a building of 20 + networks, as you can see on the WiFi Analyzer (I'm the only red to the right)
  
  
  
  If I reactive / disable Wifi with fn + f12, it goes back in plane and Wifi mode mode and sees it eventually all networks:
  
  
  
  My Wifi is on top. If it is registered, Windows connects to it and then she abandons the connection; If it is not registered, and I try to connect, it says "you are not able to connect to this network.
  Is fun is that after a few seconds, each network disappears and alone is shown (probably the one next door... I don't know).
  
  I already tried to RESET the laptop MATERIAL by keeping the power button for 10-15 seconds with the laptop is turned off.
  I tried to follow these instructions (http://support.hp.com/us-en/document/c04649175) updated drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [10 default Windows], 18.32.0 [last drivers]) without success. Whenever I have install a new driver, I uninstalled the earlier software Wireless + restart.
  
  I tried to uncheked "allow this computer to turn off this device to save power" on my settings of Wifi hardware without success.
  
  HP network support said that I did not choose a Wifi (really? The problem is that I do not see my Wifi on the list!).

  This is unrelated to a new 10 Windows upgrade since I installed it months ago and this is the first time I have this problem :/ It has always worked
  
  I tried different settings too:
  I changed the channel, I put 802.11 g on my router, APSD off on the router.
  I put "Magic off packet, QoS ad hoc off, U-APSD off, fat wide channel, differential flow mode HT off" on the creation of the map without success. Nothing chaned.
  
  The hardware test detects any failure.
  
  Important note: If I close the router, it shows my network connection with full power and he connects to it. Then I come back in my room (probably 3/4 meters away), it MAINTAINS the connection for 30 / 40 min and he drops the connection and I cannot reconnect to it more. It has always worked perfectly in my room during these months (I bought it in March 2015), so the distance is not a problem, I'm 6 / 7 m away from the router.
  In this case, it shows my network (connected) and the nearby... and the other 20 networks +?
  
  The only way I have is USB tethering with my Nexus 5.
  
  Linux: I tried the WiFi on Freya elementary (Ubuntu linux OS base) and it displays 20 + networks available on the list. He has not the connection problem with my Wifi, but sometimes it stops working, Web pages stop loading and I have to restart Wifi to reconnect to the it (usually after 30/40 min of use it).
  
  -------------------------------------------------------------------------------------

  What is the problem? My Wifi card is broken? Should I call Italian support or if you have any suggestions?

  WAWood,
  I took a risk.
  I did a factory restore with recovery HP (I have a drive dedicated for her)... and it worked!
  I had to switch from Win8.1 to 10, but the Wifi problem is solved!
  
  I'm still guessing that was the problem...

  Now, I'm under Intel drivers 18.30.0.9 worm and all the networks work.
  
  In the next few days I'm checking the linux problem (reset deleted primary partition).

• Pressing FN + F5 message: module IGFXEXT has stopped working

  Pressing FN + F5 message: module IGFXEXT has stopped working
  I use Vista
  Model - Portege M700

  With FN + F5, you can switch between monitors.
  The igfxext.ext belongs to the common user interface from Intel and it s stored in the path % system%\igfxext.exe.

  So in your case, I'll try to update the display driver. I think that this is causing the error.
  You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

• WiFi stopped working

  We're both 73 years old so not savvy with laptops, etc.

  our wifi stopped working, but he works hard cable

  does anyone know what has happened and how we can fix it, please

  Hi Joyce,

  Let me see if I can help you through this...

  The problem lies in the configuration 'power options' in the 'control panel' as some changes simple to do to correct the problem.

  I have written instructions as well as provided photos of each step - please see the pictures for a better understanding.

  Good,

  1. click on the 'Control Panel' then icon in the Control Panel window opens.

  2. at the top right of the search window "" view by: category " you will see a small arrow pointing down next to the word 'Category' - click with your mouse as 2 more options will appear in a menu drop-down."

  https://drive.Google.com/file/d/0B5B...JTQXNEMUk/view

  3. click on the option "large icons" you will then see a lot more features in the control panel are displayed.

  https://drive.Google.com/file/d/0B5B...ZGSVB0Zm8/view

  4. scroll the words 'Power Options' and click on it that a new window will open.

  https://drive.Google.com/file/d/0B5B...pTTmZBTXM/view

  5. you will see 2 options here - if not click the drop down arrow in the center of the page to reveal the words - 'Balanced' & 'High Performance '.

  https://drive.Google.com/file/d/0B5B...dpVzVHT0U/view

  You should see a small circle checked next to the word "Balanced" - you need to change this setting by clicking on the 'High Performance' next option to fix the wifi issue.

  Once you have completed these steps: close the window and test your wifi to see if that fixes the problem - if it isn't trying to "Reboot" or "Restart" your laptop and retest the wifi.

  Joyce, please report it here in case of problems you may encounter and need assistance.
  Also please report back here if this corrects the problem of wifi.

  Aloha,

  DBOBA

• Re: Satellite L350-170 - WiFi stops and starts

  Hello

  I have the Toshiba Satellite L350-170 and it's great. I am running Vista 32 bit and I got it for Christmas ' 08.

  For a while now, just WiFi stop (if I use the webcam on msn or something) as if it is just overloaded, then I had to wait a few minutes before it turns back again!

  Is there a driver to stay connected to the internet? In my taskbar, it is said that I am always connected, and when I check on ConfigFree (when I can't use the internet, but it says I * am * logged.)

  This can be solved?
  I hope you can help!

  Kind regards
  James K

  Hi James,

  Maybe this problem is caused by the router. You should check the log of it. The router is always connected interruptions?
  In this case an update would be desirable and let the ISP, check your Internet connection.

  In addition, you can try updating the driver WLAN. The latest version is available for download on the Toshiba site.

• HP Envy 4500: HP Envy 4500 printer and access Wifi University / iPhone Wifi Hotspot

  I have a HP Envy 4500 home and signed up for the moment of ink.  Works very well and I was hoping for a similar arrangement for my daughter who has just started at the University.  It seems that there are problems with the HP Envy 4500 connection to University share wireless networks.  I was wondering if the following scenario would work:

  1. his computer is connected to the printer via the USB port
  2. the printer is connected to a hotspot wifi on iPhone (his phone is already connected to wifi University)

  This work of the printer relay information support to HP for the purpose of instant ink?

  Thank you very much

  It worked so might be a good work around.
  
  Thank you