Device HP Officejet 4500 g 510

Similar Questions

• OfficeJet 4500 g 510

  for some reason any fax keeps saying no response when the person on the other end said they receive faxes, there is a NOTE: Image on fax send report is set to off

  an image of page 1 will appear here for faxes sent as scan and fax... also must there be on tone or pulse...

  Hey @caramia333,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve fax problems you are having with your HP Officejet 4500 all-in-One Printer. Send questions you are experiencing may be due to static interference on your fax line. Fax is old analog technology. Phone companies today use digital lines. Digital lines are OK to use, but it is much more static noise on telephone lines and transfer on the line rate is much faster. If your fax machine detects any static noise on the line of the fax machine may fail because of a communication error. In addition, the faster transmission rate can cause bits of data by fax to lose. This fax data loss can cause failures of communication by fax or incomplete faxes. I will guide you through some settings on your HP Officejet to account for the interference on the telephone line. If your fax is always the number 1 problems given, there may be a setting that needs to be adjusted on the receiver end fax.  Please follow the steps below.

  Step 1: Disable the OPTION Error Correction Mode:

  1. Click on the Setup (key) button on the front panel of your printer
  2. To Fax settings on the right arrow and click OK
  3. Arrow in the right Mode of Error Correction and click OK
  4. Turn OFF Error Correction Mode, then select OK

  Step 2: Slow down the fax:

  1. Click on the Setup (key) button on the front panel of your printer
  2. To Fax settings on the right arrow and click OK
  3. To Fax speed on the right arrow and click OK
  4. Turn Fax speed to Slow and click OK

  Step 3: Activate the Image on fax send report:

  1. Reselect the button Setup (key)
  2. Arrow to Print the State of law, and then select OK
  3. Arrow Image Fax Send report to the right and click OK
  4. Turn on the Image Fax Send report to YOU , then select OK

  Step 4: Check tone or pulse dialing:

  1. Click on the button Setup (key)
  2. To Fax settings on the right arrow and click OK
  3. To tone or pulse right arrow and click OK
  4. Make sure that the tone is selected

  Now that the settings have been adjusted please try send a fax again to see if the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Printer Officejet 4500 a 510 g/Mac OSX 10.10.1Yosemite.

  Hello.

  I cannot operate the printer

  OfficeJet HP all-in-one, 4500 510g.

  Printer driver problem with

  Mac OSX Version 10.10.1 Yosemite.

  Thank you.

  Hello, have a good day.

  I can't do the printer function

  HP Officejet all-in-one 4500 510 g

  with Mac OSX 10.10.1 Yosemite.

  When I get the driver?

  Thank you.

  I moved it to the Board of Directors of printing Mac where someone with more familiarity can help, hopefully.

• Failure of the scanner, HP Officejet 4500 G510g-m

  Hello

  I have a HP Officejet 4500 device that cannot do anything requiring the scanner to work, including scanning, copying and faxing. The display shows meanings cannot be made due to a "Scanner failure".

  I tried troubleshooting (resettings the device and others) and they did not help. Here are the details:

  When I turn on the camera I have here a few mechanical noises (which is natural, it movesthe cartridges and all that) and then, at the end of the power process, the scanner lamp turns on and is moved one inch to the left along the surface scan (below it, in fact), then returns to its place in the extreme right and the error message is displayed.

  Device: HP Officejet 4500 G - 501g - m

  Mac OS X Snow Leopard (10.6.8), even with Windows 7 64 bit.

  Error message: "failed to scan. Unable to scan, copy or send a fax. Press OK. »

  No changes were made to the computer or the device, just, it began to arrive one day, a few months after the purchase of the unit.

  What can I do to fix this?

  Hello yonyz

  It looks like the printer may need maintenance. It must always be in warranty if its only a few months old. If you follow the link below, you can contact HP.

  Contact HP

• HP Officejet 4500 model G 510 g Offline message on laptop Toshiba running Windows 8.1

  HP Officejet 4500 model G510g printer won't print network new Toshiba laptop (wireless), I get the message "Printer offline", but it prints well of the old laptop (Wireless Windows XP) and desktop (Windows Vista) on the same network. The printer is connected via an ethernet connection to the router. When I first access the printer the new Toshiba laptop, he identified and worked well.  He started to act up intermittently. (m) "of ideas?

  Thank you

  Frank

  Download you and install the updated Win 8.1 full driver on the HP website?

• OfficeJet 4500 g510

  I replaced my 4500 510g with the same exact 510 of 4500 g and now it does not connect with the radio with my other pc. The other has worked well. He says to go into tools and find the report wireless but I don't see it anywhere. Any suggestions

  Hi dewser11,

  I don't know how you got your connected previous model but you are right to speak of it. The HP Officejet 4500 (G510g) is not wireless capable, instead a model, you can connect an Ethernet cable from the printer to the router. All devices that communicate with your router could communicate wirelessly to the printer with the printer connected to the router.

  

  Source - page product specification

  If there is anything else I can help with, or any other question you may have please feel free to post back. I'm happy to help you.

• Scanning on HP Officejet 4500 G510n-z problems

  I have a HP Officejet 4500 G510n-z. I am currently on wireless and able to print without problem. However, when I try to scan, the display shows "NO Scan option. Refer to the documentation for the device to get out of trouble. Documentation of currency is not on the analysis of the questions and when I use the help function in the printer it tells me that there is "no computer connection. I have all set up and work wireless. Help, please! Thank you!

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

  If this isn't the case, you may need to reinstall the complete star driver.  What is your operating system?

• HP Officejet 4500: HP Officejet 4500 suddenly "not connected" and wants to "fax" while trying to print

  After last version 10 of Windows set to update my HP Officejet 4500, which was working fine, now it is "not connected", says or wants to "fax"everything." Can not even uninstall printer to reinstall the drivers. Where should I start to fix this mess?

  I managed to successfully uninstall printer with control panel and Device Manager. I then downloaded latest drivers from HP specifically say it's for Windows 10.     support.hp.com/gb-en/product/HP-Officejet-4500-All-in-One-Printer-Series---G5/3919445/model/3919446/drivers I installed and wonderful - printer working properly again. He does not think it is only a fax and print again normally computer. I think the drivers HP takes over again and did not allow 10 Windows run the show and confuse the printer and the computer more!

  Milo5

• HP Officejet 4500 All - in - One-hp officejet 4500 G510g P:

  Stampante Ho Una HPofficejet 4500g510g,.

  by the prima volta ho usato stessa cartucce Originali my ricaricate...

  Can Dell... MENTRE lampeggia it pulsating; Sul display e camera Che sta esguendo Dell MA closed... no fa niente!

  Ho tried ha resettarla... iniziando at Una focopia, sul device display "in copia" ma no lo fa...

  riceve i Comandi dal calcolatore, not li can...

  E ' da 4 anni Che C ' e Ho, quindi senza Assistenza...

  No Yes Cosa Posso fare...

  Hi @maryf78

  If you are using HP original cartridges on your Officejet 4500. Have you tried to clean the contacts of the cartridge and the contacts on the printer?

  More details in the link below...

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G5/3919445/model/3919447/document/c01953073/

  

  

• OfficeJet 4500 G510n-z: failure sending a fax from Word G510n-z

  I use a laptop Toshiba Satellite running Windows 10 with, AFAIK, updates. I am trying to send a Word document by fax to my connected OfficeJet 4500 wireless. The printing process works, I get the dialogue Send Fax, I dutifully fill. The document goes to the queue from print, then disappears. The printer is not composing or anything; the document will just in the bit bucket, without error, not even in the case log.

  Other relevant details:

  • I tried reinstalling the drivers; After several hours the skin of HP software, I did.
  • The laptop has 3 printers associated with my physical device: 2 printers generically named ' HP OfficeJet 4500 G510n-z ' and ' fax HP OfficeJet 4500 G510n-z "; and "HP # (HP OfficeJet 4500 G510n-z) ' (where # is a hexadecimal number of device-specific, I'm not willing to share here). The third argument prints correctly to the book.
  • I can scan documents through the HP Support Center application.
  • Copy and fax work correctly to the device itself. For example, if I have first print the thing, I want to fax, then by fax using the document feeder and the front of the device, it connects and sends the fax correctly.
  • The last time I checked, I was able with a fax in a program on my archaic Macintosh.
  • To repeat the foregoing, no errors are displayed or saved. Each attempt appears in the Fax as "Completed." log I don't want to get all the answers canned on the subject, thank you very much.
  • I browsed this forum of the community and support site and tried what I could find and understand how to do in Windows 10 of bugs. (Disclaimer: I've always been a Mac person and a VMS/Mac/Linux software developer, to try to understand how to do something which expected to be simple in Microsoft mess was not easy for me.) It is not suggested with a laptop given to his wife by a friend, however.)

  What unconscious thing [sic] I'm missing?

  Hello

  Please, look at the next post and make a good choice:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/want-to-send-fax-from-PC-in-HP-OfficeJet-4500-all-in-one/TD-p/1443895

  Kind regards.

• to send a Fax from PC in HP Officejet 4500 All - in - One G510

  Today I purchased the above unit and connected via eithernet, but I'm not able to send the fax from PC as the printer/Fax icon does not appear in the PC.

  I have to send many faxes and I bought this machine after reviewing the data sheet that clearly mentions "PC FAX SEND ONLY.

  means I can send faxes from my PC directly without printing the page and implementation Pan Telec.

  I ask team HP to help me configure the printer

  Concerning

  MYM

  {Information}

  Hi sainmym,

  First make sure you have the driver of Fax installed in devices and printers and then when you go to send a fax from the printing application make sure you designate fax HP Officejet 4500 G510 driver. When you tap on print you get the fax to the step 3 dialog box.

  

• OfficeJet 4500 g510g-m: officejet 4500 g510g-m (multiple issues)

  I couldn't start my printer HP Solutions program.

  I decided to uninstall the program from the printer and then reinstall it.

  The re-installation was works well when all of a sudden, an error window appears:

  "HP INSTALLER UNINSTALLER HAS STOPPED WORKING.

  A problem caused the blocking of the program works correctly.

  Windows will close the program and notify you if a solution is available. »

  I closed all windows and saw another window indicating that if the uninstallation to be completed, the computer must be restarted.  I rebooted and got the following:

  "HP Officejet 4500 g519g-m.

  Select install to begin the installation of your new HP device".

  The only thing I saw was "EXIT".

  'INSTALL' never appeared.

  All help will be greatly appreciated.  Thank you.

  Although I appreciate the help, I was able to solve the problem in a different way.

  First of all, I decided to try my new copy of the new "HP Support Assistant".  The way the program progressed, I began to feel confident that this program would fix all the problems.  I'm sorry to say that it did not work in my case.  I finally had to re - install completely the C drive, up to five days.  It works beautifully.  All my problems have disappeared.  Thank you all.

• Wireless scan not working do not, but will print officejet 4500

  I have a Dell with Windows 8.1, HP officejet 4500 Wireless.  Work to find two days ago, but now my "HP Solutions Center 's" software does not see the scanner.  \

  The Solutions Center softwared (that comes with the printer controll scanning photos and documents) is back with a message: The HP Imaging device was not found.  Try the following steps that... None of them worked.

  See my PC to the printer, and I can print to the printer, but CAN'T SCAN.    Help me please.
  [email edited by Moderator]

  Hello @chuckg7kc , welcome to the forums

  I've read about the software problem that you encounter on your system Windows 8.1, as printing software does not work for you, and you see the error "the HP Imaging device cannot be found". I have some ideas in mind which may help you!

  Perform an uninstall of level 3:

  If the software has been downloaded and extracted to your system:

  1. press Windows key + R and type %temp% enforcement and press enter

  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)

  3 open the Util folder

  4 open the CCC folder

  5. run the L3uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9. try a clean boot that turns off all startup programs. Disable all firewall and anti-virus too and try the installation again.

  10 download the drivers and full software features: here

  11. once the printer is installed, go back to the clean boot instructions to re-enable the startup programs.

  Good luck

• HP OfficeJet 4500 G510-m: set a wireless adapter in the port of my HP OfficeJet 4500 G510-M Ethernet

  Hello, a recent update of fiber in my house left me without an Ethernet cable to my HP OfficeJet 4500 G510-M.

  Can I connect a wireless adapter to the ethernet port on the printer?  I could use the USB connection, attach it to a computer and share the printer to the network.  I thought to fix a wireless to the printer adapter would give me the most flexibility.

  Thoughts?

  Thank you

  Dan

  Hello @tarfy58,

  Welcome to the forums of HP.

  I understand that you are looking for alternative methods to put your Officejet 4500 G510-M on your network.

  I would like to help.

  Unfortunately the printers firmware would not know what to do with the wireless adapter.

  You would need something like HP 1200w NFC/Wireless Mobile Print accessory.

  The only downside is that I saw the Officejet 4500 on the list of supported printers.

  Please check the specs of the device, in case I missed it.

  Your method the most effective would be to use the USB connection, attach it to a computer,

  and share the printer to the network.

• HP Officejet 4500 G510g-m it not install full feature driver software w/Solution Center

  I work for four days, try to install it, once again, my Officejet 4500 full package. And the frustrating thing is that the installer says that all of the software, with the exception of imaging and web printing, is installed. This includes the Solution Center. Yet, the center of Solution is not found anywhere else on my system.

  I work with a Windows 7 Ultimate A55MH; 2.90 GHz AMD A8 - 3850 APU with graphics card Radeon HD;
  cache 512 KB memory primary; cache memory secondary 4096 kilobytes; Tip: BIOSTAR Group A55MH
  The bus clock: 100 megahertz; UEFI: American Megatrends Inc. 4.6.4 10/04/2011.

  2479.86 GB drive hard usable capacity
  1149.13 gigabytes of free disk space
  
  ASUS DRW-24B1ST c ATA Device [scanner]
  ATAPI iHAS124 D ATA Device [scanner]
  
  Portable Seagate USB device [hard drive] (500,11 GB)
  ST3160815AS [hard drive] (160,04 GB)

  ST500DM002-1BD142 [hard drive] (500,11 GB)

  WDC WD10EALX-009BA0 [hard drive] (1000,20 GB) - Windows 7 Ultimate disc...

  WDC WD3200JS-22PDB0 [hard drive] (320,07 GB).

  There is no reason that my system should not be qualified to run this printer/scanner and all software fair that goes with it. So, what, according to you, is the question? Is it me, or is this HP? Please, be honest with your answer...

  Hi djbillyd,

  Thanks for letting me know that the printer installed correctly on other computers.

  Follow this post from @SuperMario1 to remove the printer files from the registry.

  Driver HP deskjet D2300 series does not not in windows 7.

  It's a different model, but it provides instructions to dig dip into the registry and get all of the HP software from the system.

  You can also run the Microsoft Fix it Tool to the problems that programs cannot be installed or uninstalled.

  Let me know the results.

  Thank you.