Device, injet printer pixma ip2700 do not print

Similar Questions

• "Error-printing" showing on device portable printer box

  "Error-printing" on the box of device portable printer using HP C4780 all-in-one printer wireless with Windows 7 -

  My handset and printer worked well for 2 years and now no possibility to print this message in my inbox printer on the computer device. Œuvres to printer and prints with a test on his own page printer then works. It scans and downloads, so link with laptop wifi works.

  Automatic, troubleshoot finds no problem then tells me "contact the network administrator. I tried the update of the installation software driver and said that I have the latest update.

  Checked the firewall and regarding as can see, everything is approved.

  Ah, also printer is off and the laptop and turned back on!

  Any other suggestions welcome! Thank you

  Would like to say that this has been resolved by reference to the solution posted by error-printing-restart: all to the bottom out of power leads to laptop and main market (while the laptop is turned on), count 15 seconds and reinsert the power leads to decision-making and the printer. Thank you very much!

• Win 7 Prof 64 bit, devices and printers Control Panel does not load

  When I try to open the devices and printer Panel, it opens initially but shows not all devices. The status bar at the top slips slowly into overall but never reaches the end to load completely. I've uninstalled and reinstalled the latest version of all my printer drivers (using the manufactures installation routines. Research in various forums talk about start/stop the bluetooth services, but none of this helps.

  I created another user account and when I connect it, devices and printers opens OK.

  I could live with that if it wasn't for the fact that I can't disconnect safely from my drive external hard usb. When I right click on the icon "safely remove hardware and eject Media" on my task bar the only option I have is 'Open devices and printers' and then I'm back to my original problem. The list of the menu I receive when I right click on the drive in WIndows Exploxer does not include a choice of ejection (it does for a flash drive, but not my hard drive).
  (I have a laptop with Win 7 64 bit installed and it shows devices connected when I right click on the icon "safely remove...) »).

  I tried to turn off nonMicrosoft al and restart services but still having the same problem. In the past, I had run CCleaner to clean the registry (no, I did not indicate a restore point) and I saw on a forum how that could have created the problem. I have since deleted CCleaner

  I use Avast Antivirus, Windows firewall, SnagIt and Cobian backup. Short of re - install Win 7 (please, no) or by creating a new user and all displacement there (not even sure how to do this) is anyone know how to fix this? Or at least how I can safely disconnect my drive hard usb without messing up his data?

  Then as indicated, the user profile is corrupted

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• the device has been disconnected or is not available

  I can detect the modem Huawei E173 usb and install following the instructions, but when I try to connect, watch the device has been disconnected or is not available.

  Help, please!

  Currently, my version of the MacBook has been OS X 1 10.11.4

  its MacBook Pro OS X 10.11.4

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• Update Windows in Windows 7 will be not updated. Error code 80244008. Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

  Update Windows in Windows 7 will be not updated.

  Error code 80244008.

  Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

  You may encounter temporary connection errors [for example, 0 x 80244008] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• How to find on which device connected to my system does not work?

  I have XP Professional.  Cannot start Windows Driver Foundation-User Mode Driver Framework(Manages user-mode driver host processes.)  In the window 'services.msc' and try to start Windows Driver Foundation, I get the message: "error 31 - failed to start service. A device attached to the system does not work. "Question: how to find on which device connected to my system does not work?

  1. click on start and then click Run.
  2 type devmgmt.msc in the run box and press ENTER. This will open your device manager.
  3. in the Device Manager window, click view, and then click Show hidden devices
  4. develop options in your device manager and see if there are any device with a yellow exclamation point or something that is rare. If you find one, you can uninstall and reinstall the driver for this device, as long as you have the installation for device drivers files.

  I hope that helps!

• "Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item. "When you try to open a. EXE file.

  Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item.

  Well, I was on my computer, I tried to open an exe file and I got this message

  Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item.

  I have windows xp, anyone have an idea what to do?

  Hi Reaper14,

  ·         The question is limited to this particular .exe file?

  ·         You can open other files very well?

  If you are unable to open a .exe file, refer to the following article.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Click on the link below.

  Cannot open EXE files

• App, opening a file via windows shell commands: "a device attached to the system does not work.

  Hello!

  I hope that someone here will be able to throw some lights on my question, if I post this is the wrong place please let me know because I was directed here (which forum? ). OK, I support and develop custom applications. An older application especially written in Delphi allows users to attached documents (pdf, jpg, txt, etc.) to the records of equipment in a data base. Later users can view these records of equipment and press a button to display the document.

  When the user presses the button to view the document, the application uses the folder variable to save the document to the temporary path and then asks windows via a shell command to open the file. The appeal of Delphi for windows used is the following:

  ShellExecute (GetDesktopWindow, 'open', PChar (TempFile), ",", SW_SHOWNORMAL);

  Normally this process works very well, we have had no problems so far. On a single computer (windows xp pro with Service Pack 3) belonging to a client, instead of opening the file, windows returns the system 31 error and the message ""a device attached to the system is not functioning. ". is displayed.

  * If I navigate to the location where the file is stored on the disk and try to open it, software adobe reader opens the file correctly.

  * I found some suggestions that the file extension is associated properly. PDF associated with Notepad, I changed, and the application could ask windows to open the file very well. Open the file from the location on the work of disc as well. Change the file for adobe and the problem persisted.

  * I reinstalled adobe reader software, but also a previous version of adobe and the problem persisted.

  * The application doesn't have any problem asking other files opened, only those associated with adobe reader on this same machine. The problem does not exist on other machines.

  That about sums up the problem. Any suggestion would be appreciated.

  Thank you

  Louis

  It was determined that the version of adobe reader was at fault.

• Windows cannot access the specified device, path or file. May not permissions to access you the item. Can someone tell me how to overcome this problem.

  Windows cannot access the specified device, path or file. May not permissions to access you the item. This message appears when I try to access also anti programs anti-virus will not play CD in windows media player. Can someone give me advice on what to do to remedy the problem.

  Hi Lee,.

  • You did any computer change?
  • What anti-virus program is installed on the machine?
  • What is the full and an error code error message when you access the CD through Windows Media Player?

  Follow the steps mentioned below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Note: try to access Cd rom drive and antivrirus program and see that you get an error

  Perform a clean boot according to the link below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 in order to his usual manner once completed troubleshooting computer

  The analysis of Microsoft Security Essentials online according to the LienSuivant:

  http://OneCare.live.com/site/en-us/default.htm

  Reply back with the results

• Error message: a device attached to the system is not functioning

  I have dell laptop studio 1535 with windows vista
  now when I click on manage network connections it give me a massage which is error "a device attached to the system does not" what do I do?
  Thank you

  Hello

  ·         What type of connection you are average (wired or wireless)?

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system until the problem occurred?

  Method 1:

  I suggest to refer to the link below and check if it helps to resolve the issue.

  http://support.Microsoft.com/kb/933664

• On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "Please help

  On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.

  I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.

  Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.

  Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.

  Could you please explain whats wrong and tell me how to fix this please: D thanks

  Hello
   
  1. don't you make changes before the show?
  2. is the computer is joined to the domain controller?
   
  You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
  "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
  1. connect to another user account and create a new user account to fix the damaged user account.
  For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Previous post the results in more detail, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding)

  Hello

  My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding).  All the other computers in my house are connected without difficulty.  Any suggestions?

  Thank you

  I solved the problem.  When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router.  When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.

  Thanks for your help!