device internal HP DVDRAM GT30L

Similar Questions

• DVDRAM GT30L Driver does not

  It cannot burn dvd.  DVDRAM GT30L pilot have an error message". Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "where can find driver > yes I tried to install, but it won't work."   Runing Window 7 Pro on a laptop Pavilion dv6 Notebook PC

  http://pcsupport.about.com/od/findbyerrormessage/a/code-19-error.htm

  Delete registry UpperFilters and LowerFilters values. A frequent cause of error Code 19 is the corruption of two registry values in the registry keyof class of the CD-ROM/DVD-ROM drive.

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

• the Beltway. hp dvdram gt30l sata cdrom is disabled somehow... Troubleshooting directs me to contact hp

  HP doesn't have this driver listed all the research you have nothing... My computer is a Compac Presario CQ56 - 115DK Notebook

  The convenience store said that the hp DVDRAM GT30L SATA CdROM has been disabled and suggests the manufacturer notification to update driver... All attempts to find on the internet are of no use... Unabe to use e CD or DVD on my computer

  witness9

  Hello

  Open windows control panel, open Device Manager, open CD/DVD-ROM drives, right-click the drive and select Properties.  On the general tab, is there an error code in the device status box - if there is, post back with the details.

  Kind regards

  DP - K

• Media in the CD/DVD drive is not readable (hp DVDRAM GT30L)

  Hello guys. This is my first post in this forum.

  I already ran the Microsoft fixit CD/DVD drive and the problem is the media in the CD/DVD drive is not readable (hp DVDRAM GT30L). I also tried the DVD in my desktop DVD player and stands so the problem is in the CD-ROM of the laptop.

  Hello Blue_Cloud213,

  Welcome to the HP Forums!

  I understand that the computer is unable to read the CD and DVD. Since you reduced the problem to only one computer, please try all the steps in this document from HP: disk impossible reading disks (Windows 7)

  Please let me know what happens. Thank you!

  Mario

• How to activate audio device internal

  I have I bought a used PC with XP Pro. He has a card its Audigy SB2. After getting the correct driver installed, it worked for a few days. One morning at initial start-up, the sound was out. Repeated uninstalls, driver, updates etc. have not worked. If the card is installed it causes a SafeMode only start. I don't think that the internal audio device worked initially either.  It has probably been disabled manually or install card its Audigy. I would like to go back to the internal audio device until I can find it. How can I do this? Sound card manufacturers website has some information on how to enable the SB2, but some of it looks slightly different from what my screen. I can do this, but I have very specific need step by step instructions because I certainly don't want to spoil all the BIOS settings and be dead and less well off. A lot of what is there is alien to me. Thank you.

  Hey Helpful55,

  Try using the Audio Wizard provided by Intel to see if he can help you determine why the audio interface integrated to the motherboard is not working properly. The link below will take you to a page where you can start the Audio Wizard.
  Intel - motherboards - Assistant Audio

  Hope that helps.

• No recording device internal with Windows 7 Pro 64-bit

  I can't find an internal recording device with the computer which uses Windows 7 pro 64-bit system.
  I don't want to plug an external mike, or a line cable entry.  For example, if I open Audacity, & try to record audio.
  the program cannot locate an internal recording device.  My wife's cell phone to Windows 7 edition 64-bit family.

  His portable Audacity works well.  If I put a music cd in, & open Audacity, his large laptop case!

  Hello.  I was check here from time to time, since the latter part of November.
  I didn't know that anyone made a comment.  I ran to resolve registration issues
  several times, with no useful result.  I don't check if the site of ASUS.

  In any case, I bought & installed the HT Omega Striker 7.1 sound card.   Everyone is who
  gave their comments & advice, thank you very much for taking the time.  That sound
  the card is great!  I disabled the sound edge; & installed the 7.1 attacking with the
  drivers.  His exceptional & recording!

  Works very well with Windows 7!  I made several recordings with audacity to the IHOP
  site (read the International House of prayer, not of pancakes!)  with excellent results!

• dv4050-ea DVDRAM GT30L code 19 error

  Hello. I've been having intermittent problems with my DVD drive and decided to investigate. Device Manager says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  Device Manager, it seems that the driver is up-to-date.

  Can someone tell me how to solve this problem?

  Thanks in advance for your time.

  Hello

  Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• CANNOT SET HEADSET AS DEFAULT PLAYBACK DEVICE / INTERNAL & EXTERNAL SPEAKERS USED AT THE SAME TIME

  When I connect to my laptop with external speakers or headphones then the laptop speakers (internal) is also play a sound.
  Please help me.
  I have re-installed the software drivers, BIOS, but has not solved the problem.
  
  
  Thank you & best regards

  Hi Das_Burdwan Ridge,

  You can check this link to get the drivers updated to your computer: http://www.dell.com/support/troubleshooting/us/en/19/Product/inspiron-15-m5010

  Alternatively, you can also post this question in the Dell Community: http://en.community.dell.com/?~ck_=_mn

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones.

  Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  No sound in Windows: http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Thank you.

• Device Manager does not recognize the internal WLAN card

  I have a laptop HP/Compaq Presario V6200CTO which has an internal wifi card. The wifi worked perfectly until about a week ago, when Windows 7 has ceased to recognize the card altogether. I thouhgt first it was a hardware problem and that the card had died and so I bought a USB adapter, but before the arrival of the adapter that I needed to start in SafeMode w/network (I used adapter Linksys a friend). When OS safe mode entered it automatically loaded the driver "Broadcom", installed the wifi device internal and it worked fine while I was in safe mode. After the system restarts the operating system has yet to recognize the internal card. I rebooted in SafeMode once again, but still the card was not recognized. It seems unlikely that a dead card came suddenly to life for the short period of time I was in safe mode, and then quickly died again on restart. Therefore, I think it is an OS problem, but as the map is not displayed in Device Manager I have no idea how to proceed. N USB adapter I bought works fine, but I'd rather be able to use the internal card and free USB port. Is there a way to load the device from the command line or in a way to force the operating system to find the map?

  Lack of maps can often work for short periods. Then, some components overheating or falls down and they stop working.

• Satellite C650-17Z - only PXE error message no boot device

  Hi people I was wondering if anyone of you kind people out there could help me. I have a Satellite C650-17Z model and when turn on is the message I get:

  + Intel UNDI, PXE - 2.0 (builkd 083) +.
  + Copyright (C) 1977-2000: Intel Corporation.

  + For Atheros PCIE Ethernet Controller v2.0.1.9(12/15/09) +.

  + Check the cable connection! +
  + PXE - MOF: exit Intel PXE ROM. +.
  + No boot device - insert boot disk and press any key.

  Can anyone any sense of the message above?

  Hey Buddy,

  This error message means that an incorrect boot order is set and the computer tries to start between LAN port to the internal HARD disk space. It should therefore go into BIOS setup and change the boot order. Put the HARD drive as the first boot device internal.

  Take a look at this article from Toshiba:
  [PXE error message appears during the clean boot procedure | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=8]

• N200 registration / activation / deactivation of the internal & external microphone

  Hi 3000 N200 support

  I accidentally turned off/disabled the device Microphone internal / external.

  Unfortunately, now I'm not able to activate / reactivate the microphone device.

  Please, help me to reactivate the device internal microphone / external.

  When I open the control panel-> Sound-> record (tab), everything is "grayed out".

  and it says no audio device is installed.

  I guess it's Realtek High Definition Audio device driver 6.0.1.5391 version.

  Thanks in advance

  Carsten

  Under Windows Vista

  If you have accidentally disabled the device interanal external microphone, you should try to go to Contral Panel > hardware and audio > Sound > recording.

  Right-click on an empty area, and then check the "show disabled devices". Activate the internal microphone / external device you want.

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Peripheral USB Jet Tiger has replaced my audio device

  I have a Magic Jack system which seems to have removed the device internal speaker with the device of Jet Tiger and now we have no volume.  Any help you can give me would be appreciated.

  NL

  Hi, NL,
   
  Download and install the driver again to solve this problem.
  For more information, see:

  How to manage devices in Windows XP

• Problem recording device! Please help desperate

  I get the below error

  "Net.rim.device.internal.io.CriticalIOException registration error: critical Tunnel failure."

  on the device. What happens when he tries to register.

  I use the client http push sample demo to test.

  Any ideas?

  Concerning

  VB

  Hi all

  I could bring myself using another thread

  I added apn = null for the following line of code

  private static final String BIS_PORT = "http://:20607;deviceside=false; apn = null'; '.

  Its all working now. If someone needs help, I will definitely help.

• USB device detected by Windows 7 but I don't see any records or device in MY COMPUTER

  My Windows 7 manager defrosting can detect a storage device Seagate 150 GB but MY COMPUTER cannot see him defrosting, so I can't open my old XP files with this device connected to the outside.  I tried to connect the device internally but am no farther than the same problem, thanks. Dunstan

  My Windows 7 manager defrosting can detect a storage device Seagate 150 GB but MY COMPUTER cannot see him defrosting, so I can't open my old XP files with this device connected to the outside.  I tried to connect the device internally but am no farther than the same problem, thanks. Dunstan

  you mean the files are hidden inside your hard drive or hard drive is not detected? u can see it in Device Manager?

  (1) try to change / assign a different letter for the drive through disk management, if it is no longer visible through the Disk Manager

  (2) if files and folders are hiddin use the attrib command

  Open the command prompt run as admin and go inside your hard disk by typing the letter of the hard disk on the commnand line

  For example D:

  then use attrib - a-s-h - r-* /s /d

  (3) try to run usbdirver auto http://go.microsoft.com/?linkid=9643528 microsoft fixit

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices#EGB