Unrecognized USB device if I use more than four devices. WTF.

Similar Questions

• Cannot use mobile mouse 3500 "unrecognized usb device".

  Original title: mobile mouse 3500

  Mobile mouse 3500 has malfunctioned. "unrecognized usb device". This has happened once before. It seemed to correct itself when my computer is doing a weekly update. I did an update manually, but the error has not corrected itself. This mouse is only a few months old.

  Hello

  What operating system do you use?

  Step 1: Try to run the fix it tool to the article below and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Update the driver for this device using the audit and the Device Manager.
  Reference: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  Step 3: Uninstall and reinstall the driver and the software for this device.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  http://www.Microsoft.com/hardware/en-us/downloads

  I hope this helps.

• can I use more than 2 devices for 1 account of creative cloud?

  Hello.

  can I use more than 2 devices for 1 account creative cloud?

  I know that it is limited to 2 devices for activation / account.

  Thank you

  You can, but you must disconnect from Adobe Creative Cloud app of any one of the 2 previous computers, so that you can activate on other computers.

  Connect and disconnect activate Cloud Creative applications

• Can I use more than one flash drive to ready boost on Satellite L650/0ed

  Hello

  I have a toshiba Satellite L650/0ed, it's good if I use more than one drive 8 GB flash for "ready boost" - what is the maximum number of using flash-drives can devote to the "ready-boost.

  In addition, if I use a 16 gb flash drive, will this affect more memory "ready boost".

  Why the 3.5 drive seagate expansion 1 TB is not compatible for ready-boost.

  Thank you
  -Brent907

  Hi mate

  Please check this Microsoft page that describes the ReadyBosst
  http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

  There, you can find this statement:
  + ReadyBoost works with storage devices more flash. In Windows 7, it can handle more memory and even multiple devices * eight *, for a maximum of 256 GB of additional memory. +

  I hope this can be useful!

• Unrecognized USB device... need help with the SFC results!

  I followed several channels of the problems that were associated with the popup error in Vista that says "Unrecognized USB device"... that I'm having the same problem.

  I tried to uninstall and reinstall my USB drivers with nothing working.  It was recommended that SFC.exe in the message area of C:.  I did and it came up with error messages that could not be repaired in the CFS program.  What should I do to fix these problems?  I posted the report itself below, showing that areas that have problems.

  Any help would be appreciated!

  ] Beginning Verify and Repair transaction
  2010-02-15 16:28:48, info CSI 00000124 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:28:50, info CSI 00000126 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:28:50, info CSI 00000127 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 16:28:50, CSI Info 0000012a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2010-02-15 16:28:51, CSI Info 0000012 c [SR] verification complete

  ] Beginning Verify and Repair transaction

  2010-02-15 16:32:13, Info CSI 00000199 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:32:13, CSI Info 0000019b [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:32:13, CSI Info 0000019 c [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 16:32:13, Info CSI 0000019f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2010-02-15 16:32:13, 000001 has 1 CSI Info [SR] full repair

  2010-02-15 16:32:13, 000001 has 2 CSI Info [SR] validation transaction

  2010-02-15 16:32:13, 000001 6 CSI Info [SR] a check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  2010-02-15 18:31:23, info CSI 00000006 [SR] components check 100 (0 x 00000064)

  ] Beginning Verify and Repair transaction

  2010-02-15 18:35:11, info CSI 00000124 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:35:12, Info CSI 00000126 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:35:12, Info CSI 00000127 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 18:35:12, CSI Info 0000012a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2010-02-15 18:35:13, CSI Info 0000012 c [SR] verification complete

  ] Beginning Verify and Repair transaction

  2010-02-15 18:37:58, info CSI 00000199 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:37:58, CSI Info 0000019b [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:37:58, CSI Info 0000019 c [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 18:37:58, Info CSI 0000019f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2010-02-15 18:37:58, 000001 has 1 CSI Info [SR] full repair

  Hi CapsFanQ,

  To repair the system corrupted files on the computer that was not fixed by SFC scan, an upgrade in place might have to accomplish.

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/default.aspx/KB/968279

  (See option 1 in the link)

  Note:  Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. Make sure that you back up personal data to disks or other storage devices before performing an upgrade on the spot. To perform an upgrade in-place, follow these steps.

  Until you try to upgrade on the spot, I suggest you follow the steps mentioned below to fix USB:

  Step 1: Run the fixit provided in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  If the problem persists,

  Step 2: Connect the device to a different USB port and test and also to connect the device to another computer to eliminate the problem of USB device.

   

  If the problem persists,

  Step 3: Reinstall the USB controllers.
  

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  You can contact the manufacturer of the USB device for known problems

  Step 4: Update the driver of the motherboard (Chip set drivers) to the latest version.

  Note: Please check with the manufacturer of the motherboard before installing the driver.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Slow Server 2008 performance when you use more than 1 CPU - bug?

  Hello

  It seems that when I run Server 2008 on one of my boxes 3 10.5.7 if I use more than 1 CPU in the settings, the ankles of machine the CPU while booting and then during the use of the operating system.  Normally, I have to run all 3 of them at the same time... and if I get all 3 virtual machines running, the CPU remains just pegged and slows down the machine.

  Then, if I close everything and change the settings to 1 CPU, virtual machines work fine, the CPU barely sees any activity and 75% of the 8 GB is used and it can run for weeks at a time without any problem.

  My 3 VMs

  1 Server 2008 x 64 w/Exchange 2007 2 GB, 1CPU

  2 Server 2008 x 86 File Server/Anti-anti-virus/utilities/Quickbooks, etc. 1 GB, 1CPU

  3 Server 2008 x 86 Active 1 GB, 1CPU Directory

  My Mac run all 10.5.7

  1 Macbook Pro 2007 2.33 Core 2 Duo

  1 mac Pro desktop 2008

  Rig EFIX running 10.5.7

  1 EFIX EP45-DS3R Q9550

  all the boxes are running 10.5.7 with the EFIX running 10.5.7 platform server and I can recreate in one of the 3 machines, 10.5 server or workstation, etc.

  Yes, I have the tools are installed and uses the latest patches, software, etc.

  Thanks for any help...

  VCPU more inside a virtual machine using could be a big problem, if you don't have much physical basis.

  If you set vCPU # = # pCore, then you will have several performance issue, cause you VM hangs (during its run) ALL of your hearts.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Satellite Pro L40 PLS4BE: Can I use more than 2 GB of memory

  Is it possible add more than 2 GB of memory?

  What happens if I add e.g. 2 x 2 GB?

  Intel says GM965 supports 4 GB max memory...

  BR,

  Mikko

  Hello

  No you can not use more than 2 GB of RAM. You can upgrade the laptop up to 2GB (2 x 1 GB).

  > What happens if I add e.g. 2 x 2 GB?
  I think that nothing will happen ;)
  Either your laptop will not start or will start the laptop but the full RAM will not be recognized

• Satellite A100-233 - error that unrecognized USB device

  I have a problem with my USB ports, they where working fine but all of a sudden they start gives me error that unrecognized usb device. I tried to reinstall XP but still the same.

  Can someone give my solution to this problem?.

  Hello

  You have yellow exclamation marks in Device Manager?
  I had a similar problem with the USB ports a few years ago. I removed the ports in Device Manager and reboot the laptop. The USB ports will recognize again.
  Furthermore, I reinstalled the latest chipset driver and everything worked well.

  The latest chipset driver download on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?

  How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
   
  It's only 8.3% of disk space!

  http://digital.NI.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument

  The national Instrument is reformat that you drive less than 126 GB or replace the drive with a less than this size.

  Please OR tell me you go fix your LabVIEW Real Time soon, and that we will not have to wait for LabVIEW RT 9.2.1 in 2011 for this one to fix.

  http://upload.wikimedia.org/Wikipedia/Commons/9/90/Hard_drive_capacity_over_time.svg

  Readers as high as 126 GB or more have been around since mid-2002.  It's about 7 years now and LabVIEW Real-time STILL cannot use greater than 126 GB drives!  Please OR.  Do something.

  We deserve the patches for older versions of LabVIEW RT.  What about updates to LabVIEW RT.  As 7.0.2 7.1.2 7.6.2, 8.0.2, 8.2.2, 8.6.2.

  We don't need new features or versions of LabVIEW RT as 9.0 until we have some of the bugs fixed in existing versions.

  Kevin.

  
  

• How to activate my MSF program for I could use more than 30 minutes at a time

  I had to uninstall my Microsoft Flight Simulator X and MSF - program of acceleration of my PC and reinstall them.  I did it.  When I installed FSX-Deluxe edition, the program asked me the activation number, I gave and then reinstalled the acceleration program. He asked for all the numbers, but now when I run the program, it suits me after 30 minutes then and asks for the active program.  I tried to use the Enternet and everything, but I can't well any place where I can activate this program.  I even call your hotline, they were of no help at all.  First I did not understand that you are Tech. He talked so fast and has no sense at all.  My question is: How can I activate the program? without going to halfway around the world to do. I never had this problem in the past, why now?

  Chuck Baumgartner

  Hello

  I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

  How to activate my MSF program for I could use more than 30 minutes at a time

  http://support.Microsoft.com/kb/925723

  Also check the links below.

  Frequently asked questions on how to enable Microsoft Games for Windows, streets and trips and Mappoint

  http://support.Microsoft.com/kb/927007

  Microsoft Flight Simulator X Service Pack 2 Readme

  http://www.Microsoft.com/products/games/FSInsider/downloads/pages/SP2-en-Readme.aspx

• "unrecognized usb device": error message every time that a usb device is plugged into one of the usb ports

  "unrecognized usb device": error message every time that a usb device is plugged into one of the usb ports

  1. my laptop - acer aspire 5030 - has been having this problem for the last five months.

  2. I tried everything including changing service pack, as we have xp professional, he has recently upgraded to vista business 32-bit with service pack 1.

  3 tried all the methods start the laptop after a few hours, remove the battery, press the power button for half a minute, and so on.

  4. I finally he formatted a couple of times, but the problem is not.

  5. later, I improved the professional system of vista and installed the latest security patches, but the problem remains

  6. now, I started to update its drivers, although the device is identified to be connected, but is not recognized. "the error message" not recognized usb device "appears. I try to reinstall the drivers or upgrade of drivers, it does not. It displays the message "the drivers for this device are to this day.

  7. initially, the connection of the device, the drivers are installed but still the device does not show in Explorer.

  8. I tried to change some registry values by merging a regedit file in the registry - for display devices that are not present; but still, it has failed.

  9. I then tried to delete the file infcache1.inf in c:\windows\system32\inf, but the problem persists.

  10. Subsequently, I tried to create another registry entry to "disable selective suspend" in HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB by adding DWORD and assigning a binary value of 1.

  11. I tried later also to uninstall all the system devices including USB controllers, drives and the storage controllers, who must still without success.

  12. I tried to see if the drivers in safe mode, which they did not.

  13. I tried to delete the following registry entries =

  HKEY_LOCAL_MACHINES\System\CurrentControlSet\Enum | USB PORT; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFCI-08002BE10318 & HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFCI-08002BE10200.  The computer does not have alow it.

  14. the BIOS indicates device pnp "disabled", which I also look for the BIOS settings, which do not allow me to change to change existing ones.

  15. I have not found the WINDOWS\SYSTEM32\drivers\USBSTOR file. SYS in my driver store. This affects the system?

  16. I also contacted manufacturers pnp devices that provided me with most recent and versions compatible drivers for my devices - namely an apple ipod & Seagate external HARD drive - but even after that the drivers are installed properly and the system rebooted the problem remains. Is this something to do with the updated playing driver registry entries does not after the update? OR is what registry entries are configured to only read the entries at the time of the installation of the OS?

  17. I also contacted local sellers who have suggested to me to change the "motherboard". This will help as a last resort?

  18. in the meantime I had also installed other operating systems to Linux - Fedora and Ubuntu; Full Windows XP - Home & Professional and Vista Edition. All these have been installed successfully but do not solve the problem of usb.

  19. I have also raised the original HARD disk & replaced by another HARD disk. also checked the power of all ihee and ehee usb ports to be at least 5 V. I also disabled the automatic deactivation of devices usb by the system. physical contact, ports and connecting cable is fine. the distribution of power is set at 10% for the ihee ports and 20% for ports ehee, which is what is should be the physical output is also close to 5V for all ports connected.

  20. all professional (hardware or software) should any solution for the problem of the usb ports on my laptop?

  Something that you haven't tried:

  How to fix USB device not recognized in Windows

  http://www.online-tech-tips.com/computer-tips/USB-device-not-recognized/

  I hope I could help

• IPod Classic (80 GB) "unrecognized USB device" running windows 7

  I've recently upgraded to a new laptop (acer aspire 5738G) running windows 7. I managed to transfer my itunes through library and that you have installed itunes (x 64) that works well. When I plug my ipod classic (80 GB) on a usb port, I get a message saying "unrecognized usb device". I managed to make it work once, but when I did, I got an error understood saying "this drive could run faster" or something in that sense. I tried other usb devices and all seem to work well, so I guess that's the ipod drivers or a compatibility issue with 7 and itunes. I uninstalled and reinstalled itunes, have reinstalled the usb drivers and have browsed the net for a fix but wo's me again! I waited patiently a hotfix from microsoft or apple, but still nothing. It seems that there is a great problem of the spread. Does anyone have any ideas as what was once a small annoying problem turns into a right royal pain in the a$ $. Thanks in advance!

  I also have the same problem is "USB not recognized" and I have the old IPOD classic (20 GB).

  The problem started when I upgraded my home pc to Windows 7 Pro 32-bit of Windows Vista. My iphone 3gs is currently recognized properly but not the ipod 20 GB on the same iTunes 9.0.2. Device Manager reports the 20 GB ipod as "unknown device".

  My computer is a HP Pavilion Slimline s3620f. Almost tried everything:
  -reboot several times
  -Reinstall itunes several times
  -restart the service itunes several times
  -Reconnect the ipod several times
  -tried the front and back of the usb ports
  -deleted the Sentinel file under c:/users //musci/itunes/I've found solution on another forum

  ... still nada, zit, ala!

  Update: I've found a workaround. Fortunately, my ipod classic cable is a cable in there provided with firewire in addition to the usb cable. Since my home pc has firewire port, Windows 7 now recognizes the classic ipod through this port, have a drive letter and itunes works on it as well.

• How to use more than 5 esxi hosts?

  If I try to use more than 5 guests esxi, that io parser gives a hint to use an other Analyzer io controller VM.

  So does that mean I have to use two io parser controller vms, i.e. to two Web sites that are not in sync?

  Page 6 of the IO parser guide:

  Maximum Configuration Analyzer of e/s

  Analyzer IO 1.5.1 has been tested up to the following configurations:

  With up to 128 worker virtual machines per ESX/ESXi host.

  With up to five ESX/ESXi hosts by controller i/o parser VM.

  To run the Analyzer of i/o tests with more than five ESX/ESXi hosts, we recommend using several VMs controller.

  Yes, you can use several controller - VMs

• How do I avoid the accumulation of color / opacity where two brush strokes overlap?  In other words, I want to use more than one path with the Paintbrush tool, but see no additive effect where strokes overlap.  What Miss me?

  How do I avoid the accumulation of color / opacity where two brush strokes overlap?  In other words, I want to use more than one path with the Paintbrush tool, but see no additive effect where strokes overlap. 5 Lightroom

  I use it all the time. Turn your opacity, density and traffic all 100%.

  Benjamin

• Codes of the lesson can be used more than once?

  My students purchase the book for class and use the codes of the lesson in the back of the book. These codes may be used more than once? Sometimes my students buy used texts. Thank you!

  Yes, I use classroom in a book for Photoshop and InDesign. Thank you!