Device Manager goes from full to only show Acer-made a popping sound

Similar Questions

• Device Manager shows no device, is empty

  My 8200 Dell under XP Professional SP3 shows not all devices in Device Manager.  I think that it started very recently when I was installing TM Internet Security after the removal of Norton Anti Virus 2009.  Eventually after using Norton Removal Tool. It doesn't show the devices safe.  Plug and Play is on.  I recently installed an old HP DeskJet 820Cse printer using existing drivers.  I do not think that article 953979 applies since it just (seem), took place but it seems to fit the description.  Any help is appreciated.

  There is a Microsoft 953979 patch that works, but it didn't on mine, I then found this articale and followed the instructions and it worked.

  (1) logged as an administrator;
  (2) Regedit > HKLM\SYSTEM\CURRENTCONTROLSET\ENUM.
  (3) right clicked Enum and gives right to the system and administrators full control.
  (4) clicked the button Options at the bottom of the window.
  (5) on the Advanced window checked 'reset permissions on all child objects... ". »
  (6) the deleted Enum key. Error message: error while deleting key. I had to remove this key twice because initially, it appeared the remains of Enum key. After that, the locked ENUM\ROOT\LEGACY_SSDPSRV who already had a lot of weird symbols example $% &' () * +-, etc., now gone. Registry shows an own ENUM\ROOT subkey.
  (7) PC rebooted and back connected to Windows;
  (8) window of the Device Manager showed some yellow exclamation not to mention that some devices not recognized, then refreshed a few times showing successively less then not many of these features.
  (9) PC rebooted again;
  (10) message screen saying according to Windows has finished installing new devices, and the computer must be restarted before the new settings take effect.
  11) Yes to restart the computer

  Now the Device Manager window is full and all devices running again!

  This solution works for my situation. I hope this helps someone.

• How to fix a sound problem - reading devices no. for the Device Manager on WinXP SP3?

  (1) I can't to Device Manager by following the guide for help on my system.  The steps do not match what is actually showing me my Windows and I can not here the only way I can get to it is to use a link on the help page directly.  Even when I do that, the steps in the help guide still do not match what I see on MY screen.  Is this perhaps an update of this Guide to match my system?

  (2) I need Device Manager to find out what happened on my Audio device.  I have no sound from my speakers.  It happened all of a sudden when my wife was using the computer.  I don't know what she can do both.

  Start/Settings/Control Panel / sounds and Audio Devices Properties shows "No. Audio Device", hence "Volume of the device" is gray.  Audio tab displays 'No peripheral to read '.

  The fastest way to bring up the Device Manager is:
  Start-> Run-> "devmgmt.msc".
  If it detects the sound equipment, but there is a problem with a driver, you will probably see a yellow "!" appears by your audio device.

  If he was working and stopped, you can try to perform a "System Restore" to a point where it worked:

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  HTH,
  JW

• My usb port does not work. Device Manager says he has a "code 10".

  My dad recently bought a laptop on ebay. It's a HP Omnibook 900 with a 4 GB HD. The previous owner had improved from the original from Windows 98 to XP with SP3.

  It has a USB port in the back & it does not work!

  In fact it is not even appear in the Device Manager! I need to select 'Show hidden devices' to see same the USB hub root. The USB port has a yellow warning icon. In properties, it indicates the port is enabled but does not work because of a "Code 10".

  What the devil is a "code 10" & how in the heck to solve this problem, so that the USB works?

  The port is powered. When I connect devices usb load they turn on & load, but, of course, are not displayed on the computer. My best theory is that the port can be usb 1.0 but the software is intended for usb 2.0 and what could be the cause of the problem. That's just guessing on my part because I do not know with certainty if the usb is 1.0 or 2.0.

  It is especialy boring being the only external devices can I plug a CD player (unwritten) & a floppy drive. It would make my life much more pleasant if I could run software, backup & file transfer, etc. with a usb drive instead! It could even than the laptop quite useful to be worth the bucks thirties, my father paid for it!

  Help, please. Thank you.

  Hi SnarFoo,

  Method1

  The Code 10 error code is generated when Device Manager it has not enough information or error that has spread upward through the device drivers is not recognised by the Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the article and check if that helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2

  If the previous step fails, then remove and reinstall all USB controllers on the computer and check if that helps.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

• Touchpad appearing didn't not in Device Manager

  Hello

  I have a serious problem with my laptop. The DELL touchpad does not work. I tried to update the drivers etc, but when I went into Device Manager to see if she was showing with a yellow triangle, I noticed it was completely missing. I had a technician out recently and it has replaced my motherboard and cleaned the system due to over heating problems. But now it seems that recently the touchpad was not plugged in right. I have a few weeks to rest warranty, so wonder - is this a case for another technician out to correct the error that caused the other technician? Or am I missing something? Usually in my book, once that the device is not in the Device Manager, which means usually only its not in law.

  Help quickly would be greatly appreciated.

  Thanks in advance.

  After spending a lot of time, I managed to solve the problem. I have install windows 8 x 64 and run the drivers from the Dell site. Windows 8 x 32 is not the problem.

• G6 2313ax in Device Manager displays 7660 G + 7660 M instead of 7660 G + 7670 M

  Hello

  I just bought my hp pavilion g6 flipkart.com 2313ax

  I installed win 7 64 bit and installed all the drivers.

  now in the Device Manager in the Graphics tab it shows as follows

  Adepters display:

  AMD Radeon HD 7600M series

  Card Dual AMD Radeon HD graphic 7660 + 7600 M

  but it should be 7670M instead of 7600 M as announced by flipkart.com and also in the hp Web site features

  any body having the same thing?

  is this because I use windows 7 and not windows 8 as recommendaed by hp?

  If his driver problem can any guide me how to fix this?

  and if indeed, my dealer scam me, I just need confirmation before I chew the Parry of flipkart.com representative.

  Hello:

  I don't know how experienced you are with regard to the search for W7 drivers for your laptop.

  It is quite easy if you know where to look.

  You must first install the amd chipset driver and restart. The first file listed.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  Then, all the W7 x 64 drivers of this Associates model should also work on your.

  If you have installed this driver and Device Manager reports

  AMD Radeon HD 7600M series

  Card Dual AMD Radeon HD graphics 7600 + 7600 M

  So it is what it is.  The video does not work correctly.

  DO NOT USE THE BIOS FILES

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5275620&prodTypeId=321957&prodSeriesId=5262610&swLang=13&TaskID=135&swEnvOID=4063#11360

  As you can see on the notes of the graphics driver, it's the right driver for the graphics card in your laptop.

  Supported devices and features
  AMD Radeon HD M 7670
  AMD Radeon HD 7520G
  Card Dual AMD Radeon HD graphic 7660 + 7670 M
  Card Dual AMD Radeon HD graphic 7640 + 7670 M

• No monitor showing in Device Manager

  I have a Hannspree 28 "monitor with a hdmi connection to an Asus Radeon 4890 graphics card. This facility works great under Vista Ultimate 32 bit in the default resolution of 1920 x 1200 screens...

  Since I installed Windows 7 64 bit, in a dual-boot scenario, I was unable to get Windows 7 works correctly in Normal mode, it works in safe mode, but only in 1600 x 1200.

  If I try a boot in Normal mode, then the sequence of boot stalls however I can open Win 7 Normal mode if I remove the Radeon 4890 in the element display adapter in Device Manager. Win 7 install the re - install the 4890, but can't do the correct resolution.

  With the latest ATI drivers installed in the card there is no monitor is displayed in Device Manager at all.

  Your help to fix this would be appreciated.

  GTS

  Hi Debra, Maryam and Aziz (and other stakeholders)

  The problem is almost solved, I say almost because I don't like having unexplained things always happening on my computer! The solution was obtained by marketing the Narrator function and use of inputs keyboard known to explore what was going on behind the BSOD (BlackScreenOfDeath) so that I now have the monitor works in glorious mode of 1920 x 1200.

  The solution actually came from my eldest son, when he asked if there was anything on the Toshiba TV (the other feed on the Radeon 4890). Yes, you have guessed the TV screen showed a perfect desktop but at a slightly lower resolution.

  Using Clone installation I got office showing on the Hannspree in seconds and, after a bit of investigation, I found that Windows 7/Asus Radeon or some another gremlin has decided that the main screen was my TV and that the Hannspree Monitor 2? -I don't know how this can happen.

  Suffice it to say that once I told Windows 7 that no. 2 was in fact my main monitor I could turn off the installation of clone and reset the Hannspree to its native 1920 x 1200 resolution, everything I want to do now is to say the 'system' that the Hannspree is main and monitor no. 1, but if I can't then I can live with n ° 2 - lol.

  Thank you very much for your efforts and I hope that it can match someone elses knowledge of the vagaries of Windows 7.

  Best wishes

  Gordon

• Satellite A100-1AI watch CD player but Device Manager shows the DVD player

  I own a Satellite A100-1AI and went from Vista to Windows XP?

  My DVD player has been discovered as a HL-DT-ST DVDRAM GSA-T20N but is only showing as a CD drive in my computer screen.

  Also Device Manager shows Mass Storage Controller and controller SM Bus as an unknown device (other).

  Since the switch from Vista to XP I have not adjusted my BIOS settings

  How can I make my DVD see CD and erase those unknown devices

  Thanks in advance

  Spon

  Just a question;
  You can read and burn CDs?

  Regarding the unknown devices:
  These devices are only compatible Vista and so there is no drivers for the mass storage controller.

  Check this box:
  http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

  + After the installation of Windows XP, there might be a yellow exclamation by a "PCI memory controller" or * mass storage controller * in Device Manager. +

  _Solution: _
  + This unit is probably the module of Robson former Turbo Memory. +
  + This hardware will only supported by Windows Vista. +
  + That is why there is no Windows XP drivers. +

  Greetigns

• X 201 problems Wireless: Intel wireless 802.11agn shows didn't not in Device Manager

  Hi all

  Just got my new Thinkpad X 210 series laptop, and it was supposed to have WiFi Intel 6200 AGN and also WWAN ready, with Bluetooth link. However, when I open the Device Manager, I do not see this adapter under network adapters, because I see that the Bluetooth adapter. I can't connect to my wireless router, or he sees no wireless connections as I now use it on another computer.

  Can someone please tell me if this feature should be "on", or what? When I'm trying to diagnose my internet connection problem, also, there is no option for the wireless connection. I don't see a symbol that lights up on my screen, or just below the screen that shows the bluetooth symbol, and if I move the switch located on the side left front, it will turn the bluetooth market. I can't believe this isn't the Wi - Fi connection card installed. Is there something I need to do to enable this, or at least let appear in Device Manager? I also disabled the bluetooth button, and goes out, she also does not appear in Device Manager. So before booing and yelling at someone who sold me this, I better know if there is a turn on the switch for this adapter wi - fi enable. Any help will be really appreciated, or I'll have to wait another day to call technical support on this issue.

  Thank you very much and I look forward to reading to stay on top of things by reading the comments on this forum.

  Here is the package Hotkey integrations:
  http://www-307.IBM.com/PC/support/site.WSS/MIGR-74261.html

  If you have installed clean Windows, you also need this:
  Power management driver: http://www-307.ibm.com/pc/support/site.wss/MIGR-4GXPEG.html

  You'll want to start the drivers linked from this page also:
  http://www-307.IBM.com/PC/support/site.WSS/MIGR-70656.html

• Drivers from Device Manager

  Hello

  I'm a new being in the mists of the clean installation of windows xp home edition for professionals.  I have a used computer that I think is as old as 12 years without a manufacturer.  Although Microsoft stopped supporting xp I know a website where I can find drivers for this computer date so if ongoing enforcement.

  I'm looking at for the installed drivers Device Manager.  Comparing them to the xp driver supported Web site.  Pilots can go back as far as Windows 2000 or 2002.  My question is.   I get the correct information from the Device Manager.   The computer is too old to 12 years going back to the era of Windows 2000 or 2002.

  Regarding any reply received.  I can answer this question to the other driver related queries about specific drivers for this computer.    Thank you Kenny.

  http://www.Dell.com/support/home/us/en/19/product-support/product/dimension-E521/manuals

  above is the owner's manual

  http://www.Dell.com/support/home/us/en/19/product-support/SERVICETAG/JJNTM2J/drivers?s=BSD

  above are drivers for your specific pc, you can download them to a flash drive and then install on your pc.

  There is a certain order to install dell drivers:

  Driver or application name	Category	What it does
  1 Dell System Software	System utilities	Provides critical updates and patches for the operating system.
  2 chipset driver	Chipset	Help Windows components control the map system and controllers, such as the USB ports and other internal components.
  3 PCMCIA and smart card drivers	Security	Measure of capacity of slot PCMCIA and smart card.
  4. Intel Matrix Storage Manager	Serial ATA	The Intel storage driver is only applicable to the Intel chipset computers.
  5. audio driver	Audio	Activates and enhances the audio controller.
  6 video driver	Video	Improves video performance.
  7 interface or Ethernet drivers network card	Network	Improving internet access network or network controller.
  8 ControlPoint System Manager, ControlPoint Connection Manager and ControlPoint Security Manager

  Note: This driver is required for some Latitude laptops, and depending on your system configuration, you do not have to install all three parts
  Control point The Dell ControlPoint (DCP) controls the management of food for some Dell Latitude laptops. ControlPoint System Manager monitors the management of food and ambient light sensor settings, controls ControlPoint security features Security Manager and ControlPoint Connection Manager control wireless connection profiles. 9 Dell Quickset Application Controls power management and ambient light sensors. 10. wireless network drivers Network Activates and enhances the wireless network controller.

  11 Bluetooth drivers

  Note: If this driver is not available, then your computer does not have Bluetooth compatible. Continue to the next on the list driver.
  Network Controls and allows Bluetooth connectivity. 12 mouse, keyboard, touchpad and drivers for input devices Mouse, keyboard & input devices Enhances the pointing device features. 13 Intel AMT or vPro (if available) Chipset Improves the manageability of the system. 14 drivers wireless card Dell mobile broadband (if available) Network Allows wireless connectivity to broadband. 15 drivers modem (if available) Modem/Communications Allows dial-up capabilities. 16 Dell Digitech touchscreen driver (if available) Mouse, keyboard & input devices Allows you to enter key screen on some Dell laptops.

  You can also read this article

• Insuffecient privileges to install the drivers from the Device Manager.

  Windows XP Pro SP3

  "You don't have sufficient privileges to security to unistall devices or to change device properties or device drivers. Please contact your site administrator, or logout and log in again as an administrator and try again. "
  

  This message appears for me when I try to install a driver Ethernet from the Device Manager, even if I am connected from the only available on my user accounts Admin!
  

  I tried re-formatting of windows, but does not choose the CD drive niether shows the start menu when I start the machine.

  any suggestions please?
  

  or any other required information?

  Thank you very much.

  It's part of the problem that I do not in the BIOS, I know that many make the CD/DVD of my first startup. I just can't make the first boot from it! What about the second problem which I can't make changes in Device Manager.

  Thanks for your reply.

  Using a portable OEM version or office? They have total control over your system? You can only use it for the calculation of daily life.

  If you can not enter the BIOS so no way to change the boot device priority.

  Better, you contact the OEM.

  How are therefore continue on you can't get into the BIOS? Have you tried several times by pressing "Del" or the "F2" key during startup (when the first time OEM or any screen logo into your monitor after restart or reboot)?

  S.Chatterjee

• Renesas USB3.0 Host Controller disappears from the Device Manager

  I recently installed a USB3.0 PCI-E card in my computer (Renesas uPD720200 USB3). The problem I have is that the host controller keeps endangered since the Device Manager, and then I can't use the USB ports. I use Windows 7 64-bit. It disappears usually when I stopped for an evening and then start up the next day and he disappeared. If I just have it reboot normally disappears, but sometimes remains. If I leave the computer and let it go to sleep, when I wake up, the host controller has disappeared. I tried some troubleshooting steps are based on research on google and the answers to this question: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/renesas-usb-30-driver-continuous-uninstalls-from/ac6b1137-1778-e011-8dfc-68b599b31bf5?auth=1&page=2

  If I uninstall all controllers USB host and reboot, the host controller reappears, but only temporarily. The next time I start up it went again and I have to repeat the process (uninstall all host controllers and restart).
  Once or twice I could make it reappear after running the utility of hardware troubleshooting (Panel-> Troubleshooting-> Hardware and Sound-> configure a device), but it is not reliable and I'm usually better off just uninstall all host controllers and reboot. Regardless of if it works, the store always gives me the message "hardware changes may not have been detected", and when I look at the details it says "configured to never install drivers from Windows Update. " There is no question."
  I've updated the driver. I downloaded the Version 2.1.28.1 of the Intel Download Center (http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/19880/eng/USB3.0_allOS_2.1.28.1_PV.exe&lang=eng&Dwnldid=19880). It seemed to install fine, but Device Manager shows the driver version is 2.1.28.0. Repeat the installation produces the same result.
  I updated the Firmware (http://www.station-drivers.com/page/renesas.htm) and that seems to work very well, but didn't had no bearing on my problem.
  I would be really grateful for any help or suggestion.

  Hello

  Adding to the valuable suggestion of Josh-H, I also suggest you to run the FIXIT and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Smartphones from blackBerry Desktop Manager asking for Device Manager

  When I try to boot my desktop manager, I get the following message:

  "The Application Loader Wizard requires BlackBerry device manager must be installed.  Please contact customer support. »

  But it seems that Device Manager is installed and running correctly.  It is also strange that the Office Manager window title says "connected - BlackBerry Desktop Manager»

  Then another box opens with the title, "Current task" and it displays the message:

  "Verification of updates of device applications.  Please wait... »

  I can't do anything while it checks updates and pressing the button cancel has no effect.  I end up having to close the Manager program office via the windows Task Manager.

  I tried uninstalling and reinstalling with the supplied CD and downloading the latest version of the desktop on the web Manager software.  I am running Vista Home Premium 64.  Anyone who can point me in the right direction to get my BB works fine on this computer?  (It works fine on my XP computer)

  Hi and welcome to the Forums!

  Since it seems to be so many things, I suggest the following steps (reboots insert a lot of restarting your PC... not only restarts, but at full power down). In addition, it is recommended that you are connected to the PC on an account with full administrator rights. In addition, Vista, use the option "Run As Administrator" for everything.

  (1) remove the package to update your device OS of your PC (Add/Remove Programs)

  (2) properly uninstall the RIM DTM software:

  • KB02206 How to perform a clean uninstall of BlackBerry Desktop Software

  (3) get a new RIM DTM software download:

  • https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
  • Choose the version which is more recent and (if any) compatible with your PIM (if you are synchornizing via USB):
  • KB12268 Applications supported by BlackBerry Desktop Manager to synchronize

  (4) to download a new copy of your package to your carrier OS device (on your PC):

  • http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  (5) install DTM on your PC

  Installation of 6) (also on your PC), device OS package

  (7) start whatever you were trying again.

  If all goes well, who's going to make things again.

  Good luck and let us know!

• HP mini 110: cannot use my wifi as it currently disabled from Device Manager according to assistant Wifi

  My system is asking for me to insert an artheros wireless adapter and I installed all the drivers, but my WIFI isint working again and when I downloaded assistant wifi it shows that he is disabled from Device Manager that i have tried everything I could give.

  pls kindly help.

  Here is the my system informatiom

  HP Mini 110-1160SA PC

  Best regards.

  Hello:

  I think that you need this card driver wireless for your 110-1160sa.

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp44923.exe

• Satellite Pro M50: Device Manager displays only 768 MB memory

  Hi all

  I have just rebuilt windows THAN XP on my Satellite Pro M50 and everything seems fine, except that before I reinstalled XP my device manager showed all my 1 025 Meg of memory.

  Now, it shows only 768 Meg. However, Information System shows all Meg 1 025. Any suggestions?

  Thanks in advance,

  Phil

  Hello

  I suppose that the memory was not upgraded. That I myself remember portable Pro M50 shipped with 256 MB + 512 MB modules.
  That is why I see problems with memory. It should show 768 MB.

  Hoe did you check the value of the memory in the system information?