Similar Questions

• right click on "Devices and Interfaces" does nothing

  Hey all,.

  I am trying to add a raw TCP VISA OR max socket.  When I right click on "Devices and Interfaces", the line is highlighted and any drop-down list appears, much like a left click.  However, when I right click on 'Software', the drop-down list appears.  I have all the software AND up-to-date. Is there additional software, that I should add (I NI-VISA 5.4 as well as the watering duration) visa?

  Thank you

  Matt

  I think I know what is happening.  It seems that you have just the duration of OR-installed VISA, but not the NI-VISA full supports, which includes additional support of MAX configuration.

  With the new version of MAX 5.5, devices will appear with the help of configuration limited when you have only the version of the installed driver running as opposed to in the past when nothing arise.

  Here is a link to the full installer 5.4 NI-VISA - http://joule.ni.com/nidu/cds/view/p/id/4230/lang/en

• No devices and Interface in MAX

  Hi all

  I recently installed the evaluation version of LabVIEW and I try to communicate with a dynamometer of Mark-10 series 5. The problem, however, is that MAX doesn't detect the device or any other instrument. It's not even a tree device and Interface.

  I am running Windows 7 and Mark-10 drivers are installed (and is detected by the device as a USB Device Manager).

  Someone has an idea of what could be the problem?

  And how are you trying to communicate with the hardware, GPIB, serial, usb, TCP/IP,...? Did you install NI-VISA is there and equipment driver provided by the manufacturer?

  Note: MAX shows not only with products OR.

  Ben64

• the NI 9871 serial ports appear also in MAX with built-in serial ports of the target - under devices and Interfaces IS NOT? NO NEITHER 9871 (Scan Interface)?

  Hi - Have cRIO

  Can someone help me get the NI 9871 (Scan Interface) work?  My two 9477 and two 9425 and 9403, function with the scanning Interface.  In MAX > software > NOR-Serial RT 3.82 > NOR-Serial 9870 and Scan Engine Suport 3.8.2 9871 BUT NOT == MAX > devices and Interfaces > series & parallel = number of Ports Com for 9871 listed?   Project, 4-port RS-485 NI 9871 is in slot1?  Any help appreciated thanks

  the serial ports on the NI 9871 also appear in MAX with serial ports integrated target under devices and Interfaces

   

  NEITHER 9871 (Scan Interface)

  I left the Slot 1 Slot 8 9871 Know works and MAX displays 4 COM ports.  Something is misconfigured in Slot1?

  Solved!

  Thank you

• MAX does not list the devices and Interfaces in the tree

  When I open MAX, the tree displays only software in my system. I'm trying to access the devices and Interfaces, that should be included in the tree as well as a number of other elements. I've attached a screenshot of what I see. Why everything is not listed, and how can I solve this problem?

  Spuleio,

  You won't see if device drivers are not installed.  Notice the button in the example that says "Open VISA Test Panel"?  VISA is loaded with device drivers OR.  You can find the drivers here.  If you want just the VISA, I think you might be able to find it here. But, in both cases, NEITHER needs a way to talk to the port, hence the need for the driver.

  Cheers, Matt

• Why can't the PCI 6040E under devices and Interfaces

  Hello!

  I intend to use a PCI 6040 E connected to a BNC 2010 to measure 3 different voltages as an entry. I installed the mx of NOR-DAQ 9.7.5 on windows 7 (64-bit). My question is why I can't see my devices under the "devices and Interfaces? even by Labview, DAQ assistant, acquire the signal, anaolge of entry... I can't configure the devices of this error: no supported devices found.

  Any idea? Thank you

  You're going the wrong way.  The latest version of DAQmx that supports PCI-6040 is 9.5.1.  See this article for more information: OR-DAQmx and NOR-DAQ Driver Support: PCI/PXI devices.  And LabVIEW 2011 is the latest version of LabVIEW that supports DAQmx 9.5.1.

• Why 'Device and Interface' lack of tree MAX Config?

  I am trying to integrate a range of LeCroy WS64MXs with LabView, but no luck so far.  In the measurement and Automation Explorer program, there is no worksheet named "Devices and Interfaces" in the configuration tree.  All I have is 'My system-> software' and 'remote systems.  Max version 4.5.0f0.  This sheet should be there by default and if not, how it added to the tree?

  
  

• MAX does not see the devices and interfaces

  Hello

  Just got a laptop computer to support the lab and installed Labview. For reasons that I don't have understands THAT MAX does not see the com and USB ports in the laptop. The IT Department gacve my rights to admin ID. Any ideas what's happening?

  Kind regards

  Kaspar

  Dennis, as usual, is correct.  Please check if you have installed NI-VISA.  There is an article in the knowledge base on the way in which com ports are not in MAX unless NI-VISA is installed.  The link to this article is below.

  http://digital.NI.com/public.nsf/allkb/1FAB687036A2D85B862571490072307A?OpenDocument

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• mouse has suddenly stoped working and shows as unknown device

  using the mouse to knit and then all of a sudden he stopped, I don't have the $ to buy another ball order now and I'm hooked on it Ive tried system restore, remove the unknown device and using a driver specifically for him to install it. Ive tried using the vista remove the plug & read file so that it can reload the file and try agine of device as some sites say to do and it won't work eather so I tried a wipe of total power reset the motherboard and I tried other usb ports and I tried to use other devices in them , they work Ive tried takeing all devices under stop and restart with only the mouse, ive tried to remove all usb drives and restart the computer with just the mouse, Ive tested the mouse on some of my other computers and it works on all of them it is the only computer that vista im runing on but as the mouse worked a year already on the vista any ideas how to run im Miss ideas.

  Hello j_waver0000,

  Thank you for using the Microsoft Windows Vista Forums.

  I would like more information on what brand and model of mouse you are using?  I know that you listed Trackball, but I show several manufacturers using the name of trackball, including Microsoft.

  Have you informed you have uninstalled the mouse drivers, have you done this in Device Manager?   "Click Start-> type Device Manager" in the search field-> select Device Manager-> select mice and other pointing devices-> with the right button of your device, and then select update.

  If the device is already updated and then right-click and select "Uninstall".  You may be prompted to restart, otherwise right click again on your device and select "install".

  If you have a Microsoft Mouse, please visit this link for additional information.  Please let us know status.  Thank you!
  Microsoft Hardware
  http://www.Microsoft.com/hardware/ engineer in Support of James Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Unknown PC shown in devices and printers

  Original title: does anyone else have access to my computer or is a microsoft program?  The name of the PC / multimedia is Tina.

  When I opened my device and printers today, I see that a (pc) device under multimedia that is unknown to me?  Author is Microsoft and the State is in offline mode and the properties are unknown.  Does anyone else have access to my computer?

  Hey Jeannie,.

  Unless you have given access to your computer to someone, there is no way that someone else can access your computer.

  Devices and Printers window shows the devices that are plugged into the computer. Usually, the first PC icon you see will be the name of the computer. Make sure that it is not the name of the computer.

  -Type of Panel in the Search and then click on system and security category and choose the System.

  -If the name of the computer and the name displayed for the PC icon in devices and printers are the same, then you need not worry.

  If it's something else, then go into devices and printers, click with the right button on the PC icon and click on remove device. Restart the computer to ensure that the changes are applied.

  Hope this information is useful. If you have any questions, let us know.

• Unknown device and device Base system shown in Device Manager

  Original title: VAIO VPCF24C5E

  Hi all

  I've updated Windows 7 Pro for Windows 8 pro on my Sony VAIO (model VPCF24C5E).
  Instead of using the kit to upgrade from Sony - which would be put to day/install the necessary drivers that are compatible with Windows 8, I decided to perform a clean installation and leave with the generic drivers.
  Everything works fine, except there is a device in the device manager that are displayed as "Unknown device" and another showing as 'System device Base' which has installed a driver, no one can be found.
  Also the only FN keys that work are the volume and mute keys. So I guess that one of these devices is something to do with those non-functional.
  I wonder if anyone can shed light on what are "Unknown" devices and "Base System" and what they are for and the drivers, I need to get them to function.
  It is not a major issue to be honest, as there is nothing that the FN keys do I can't access/adjust through the windows. But I would fix still rather the question anyway!
  Here is the link to the Support page for my laptop: http://www.sony.co.uk/support/en/product/vpcf24c5e
  Thanks for reading, any info on this will be appreciated.

  Hi James,

  This problem occurs when the drivers for the laptop card reader or your computer is not properly installed.

  I suggest you to download and install the latest drivers for the card from the website of Sony Reader and check if that helps.

  Take a look at http://community.sony.com/t5/Windows-8/Unkonown-quot-Base-System-Device-quot-in-device-manger/td-p/122701

  Hope this information is useful. If you have any questions, please let us know.

• PCI device and unknown device (code 28)

  After the installation of Wind8.1 my Hp 250 G2 (FOY89EA #ABE) lost the PCI device and when I connect to HDMI or VGA, no image is produced on the TV. How can I solve this problem?

  You are the very welcome.

  You need this driver that is not on your PC support and driver page...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124774_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Why my iphone of name may be exposed in any other device with another identifier apple?

  Why my iphone name can be exposed in any other device with another identifier apple

  How can I remove that?

  MIC

  The name of the phone has nothing to do with the Apple ID and can be modified in what by:

  Settings > general > about > name >

• G6-1c74ca: re installed windows now in trouble with drivers for pci devices and network control

  Hi I cannot locate the drivers I need to download for my laptop. I have recently reinstalled windows and it can not find the dirvers for my network control devices and pci. The model number is g6-1c74ca and the product number is A3J86UA #ABC.

  Yes on the page that I linked above you need Realtek LAN and LAN Realtek wireless network and also Intel Management Engine Interface under Chipset.

  If it's "the Answer" Please click "Acceot as Solution" to help others find it.