Devices and printers very slow to load, Windows 7, computer laptop amd

Similar Questions

• printer not shown in devices and printers - teacher of windows 7, 32 - bit

  I am running windows 7 Professional, and my parallel printer (hp laserjet 5 p) does not appear in my list of devices and printers. I can also access via my LAN.  It doesn't, however, work very well as my default printer. what I have to do to get on the list, I can change the attributes to share?

  launch printmanagement.msc, it is the tool provided by the spooler team to administer local printers

  Apparently the devices and printers will fire this printer on your computer if the parallel port is configured for the SPP.  If you right click on the computer in devices and printers, you can see the menu item printer properties there.    You can change the configuration of the BIOS of your computer.  If the parallel port is an addition on the map please let me know the manufacturer.

  But frankly printmanagement is a better solution.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Windows folder instead of the Officejet 6500 icon icon has more E710n in devices and printers

  Can someone help me get the OfficeJet 6500 has more e710n printer to display correctly in devices and Printers icon?

  I have recently reinstalled Windows 8.1.  However, when I installed my printer, the printer icon in devices and printers, I get a generic Windows yellow folder icon.  The Fax icon is OK, just the printer icon is wrong.

  

  If I double click the icon, I get a blank page with a message near the top of the page saying: 'information updates are available on your device.  Click here to download or learn more. "If I click on the notice, a drop down menu appears with 'Download update of information' or 'Learn' more.  If I choose Update downloaded information, a new printer window appears which is often empty except for a message in the center of the window that says "no task is available on this page" to learn the most fair option gives me info on the update of drivers.

  The icon of the printer in the start menu is fine.

  I used HP Print and Scan Doctor uninstall and reinstall my printer, but it did not help.  The program finds a problem with the printer driver and the fixed, but that has not changed the icon either.

  I'm running Windows 8.1 Pro 64-bit fully up to date and used the full version of the HP Installer for the printer (not the basic version) and HP Print and Scan v4.6 doctor.

  Hello

  Try following these steps and let me know if that can help you:

  1. In the control panel select network and internet, and open network and sharing Center.
  2. Click on change advanced sharing Center.
  3. Make sure the network discovery is trned on but uncheck "turn on automatic configuration of network connected devices.
  4. Devices and printer the printer right click and select remove device, repeat the for the Fax icon.
     Note: If no such option exists for the printer, follow the next steps.
  5. Right-click in the background area and select the Mahager device.
  6. Delete any instance of the printer of imaging devices, Print queues, multifunction, printers, other devices adapters (if such exists).
  7. Once you have completed the printer should no longer appear under devices and printers...
  8. Open the software HP Officejet 6500 E710, select Connect a new printer and check any differnce.

  Hope that helps,

  Shlomi

• Windows 7 freezes for the right click devices and printers don't is not loading

  I support for a local photography studio and built all of their computers. One of their photo editing machines faced some weird problems I can't solve.

  It is currently running Windows 7 Ultimate 64 bit. About two months ago the mainly the user complained that a right-click on a folder or a file on the desktop would cause the computer to freeze. She also noted that devices and printers would not have been responsible. We finally just did a clean install of Windows, and that seemed to fix the problem...

  .. .for a while.

  About two weeks, the same two problems returned, now it is intermittent. The user declares every morning, she has him restart the computer several times, but then everything works very well for the rest of the day. But while it comes in the next morning, and it does the same thing.

  I tried manually reset the BIOs, turn on Bluetooth Services (even if that computer does not all bluetooth devices) and play with Windows registry a bit, but because the problem is not compliant, it is very difficult to solve.

  I don't know if it's a hardware or a Windows problem. All the tracks would be greatly appreciated!

  Check the report viewer for all errors that occur.

  Clean boot the PC and redo the test

  Run a memory test and a test HD

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• DIAdem v11.1 SEEN very slow to load pan and zoom 2D graphics axis

  As for the user KJ2, I find DIAdem version 2011 very slow when loading the data in the display.

  I have two laptops, a DIAdem 2010 operating and the other the new 2011. IAM loading the same PDM file into two versions.

  The 2010 takes more time initially to load the data in the browser window, but it is almost instant when zoom and pan in the display window.

  Load the file instantly in the browser of the 2011, but then takes an age to zoom and pan, which is very frustrating when the analysis of the data.

  I can improve performance at the 2010 level if I load the data with an interval of small applied reduction (factor 2) - once again, it takes much more time to load in the browser window, but is now usable in the view window.

  The only problem now is that all channels are renamed with the Appendix "sample".

  I guess that's a result of the new feature 'optimised loading data' which I guess is only load the data when I need IE when zooming and panning in the display!

  Help please, before I resort to re - install 2010!

  Karoline

  Hello Albert,.

  It is a relatively easy solution:

  In the BROWSER, go to the menu "settings":

  

  In the dialog box that is displayed, change the setting of data "always load in bulk.

  

  Alternatively, you can also change this in the dialogue box "parameters: compatibility", but I don't know what is the difference between these two methods.

  Hope that helps, no need to return to the 2010 version after these changes. Oh and don't forget to save your configuration file after making the changes to make them permanent!

  Otmar

• I'm runinng Windows XP Home Edition 5.1 Service Pack 3 but my computer is very slow when loading files could you tell me about the software to speed things up please

  My computer is very slow runinng when I'm checking my Email and sorting out when I delete the emails I don't want it seems to take more than five minutes to remove as it is very slow to load web pages from the Internet

  HI Bob,

  Unless you use MSE and think the problem is caused by malware (which is possible, but not very likely given the much more likely reasons - however, if this is the case, after return and we will be happy to provide instructions on how to clean your system and check that this has been done correctly and completely) please repost it here for help on this issue: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance?page=1&tab=all&tm=1300700638376 where experts in the field are better qualified to help you.

  Good luck!

• Photosmart 5515 shows like a scanner in Windows 7 devices and printers

  Product Photosmart 5515-B111H (CQ183B) running on Windows 7 PC. Software seems to have loaded ok. When the install window appears the USB and other connections are indicated, USB has been selected but the connection does not appear on the next screen.  When I looked at devices and printers from the start screen, the 5515 appears as a scanner without the attributes of the printer.  It disappears when the 5515 is disconnected.  How can I connect the printer properly?

  Hi Baddowman,

  Follow the document below.

  http://support.HP.com/us-en/document/c03521864

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• No printer not appearing in devices and printers in Windows 7

  This is quite disconcerting, and after a thorough search, I can't find an answer to work.

  Basically, I installed a printer on my machine here Win7Pro.  The printer can be printed from various applications.  However, the printer does NOT appear under devices and printers.  The printer appears under print management.

  The printer is an Epson color Stylus 2200 connected via USB.  The computer is a Dell D620 Laptop.  Win7 has been properly installed - no upgrade.  The printer is visible (for example) of Corel Paint Shop Pro X 2.

  Anyone has any ideas what setting I need to enable the visibility of printer under devices and printers?  Is there something other wrong here?  It's easily fixable?

  UPDATE: I just added a shared printer (connected to a WinXP machine brother 7040) networking for this laptop Win7 and it isn't too visible under devices and printers.  However, what is different here is that this printer is also not visible under the management of printing.

  Network connections are not in print management.  They should appear in printers and devices IS very disconcerting.  Normally, this will occur if the print spooler service is not running, but then your local machine would be displayed with a red indicator in printing management.

  I guess that you have a standard USB and not a parallel converter cable USB cable.

  Check the security settings for the properties of the printer.  Make sure that your user account is listed at least print access.  Devices and printers opens with the standard user security token.

  Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• Devices and printers does not load

  In January of this year, I've updated my laptop to Windows 7. I recently upgraded my second computer, a desktop computer, Windows 7 and am trying to set up the home network. I tried to open devices and printers in Control Panel on the laptop but the software won't load. The devices and printers desktop load correctly. The printer is connected to the laptop and functions normally. What do you suggest to me that I do?

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Check your hard drive for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  If the problem persists, try the following:

  1. Insert the DVD of Windows 7
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on "repair your computer".
  6. Select the operating system you want to repair.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Devices and printers won't load

  Hello

  I write on the page devices and printers. I looked at other messages and nothing has worked so far. I will list what I did.

  -Bluetooth enabled and set to automatic

  -a ran chkdsk/r twice

  -made a clean boot

  -check updates

  -disabled firewall

  -off spooler printing and Bluetooth service at the same time ending explorer.exe, restart explorer.exe and activated the two services to auto again.

  -tried to use different profiles

  Specifications of the computer:

  Windows 7 64 bit

  4 GB OF RAM

  I7 2.80 Ghz

  Nothing above worked. Let me know if you have other ideas of cause that I'm about.

  Thank you.

  Hi Alex,

  Thank you for the update on the issue.

  If still problem persists, I suggest you to try the steps in the below mentioned thread and see if it helps you to solve the problem.

  Failed to open devices and printers in Control Panel.

  If the problem persists, try the steps in the below mentioned thread.

  Devices and printers page takes forever to load & does not show my printers or devices

  Keep us updated on the status of your issue and we will be happy to help you, if necessary.

  Kind regards

• Can't access the "devices and printers" in Windows 7

  I'm unable to access the "devices and printers" menu in windows 7 (32)

  When I click on the menu, it crashes just a white screen and never load.  I checked the print spooler service and it is running...

  If you have installed McAfee software that can block the enumeration of objects in devices and printers.  Make sure that the Bluetooth service works also if you have any compatible bluetooth devices. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Win 7 Prof 64 bit, devices and printers Control Panel does not load

  When I try to open the devices and printer Panel, it opens initially but shows not all devices. The status bar at the top slips slowly into overall but never reaches the end to load completely. I've uninstalled and reinstalled the latest version of all my printer drivers (using the manufactures installation routines. Research in various forums talk about start/stop the bluetooth services, but none of this helps.

  I created another user account and when I connect it, devices and printers opens OK.

  I could live with that if it wasn't for the fact that I can't disconnect safely from my drive external hard usb. When I right click on the icon "safely remove hardware and eject Media" on my task bar the only option I have is 'Open devices and printers' and then I'm back to my original problem. The list of the menu I receive when I right click on the drive in WIndows Exploxer does not include a choice of ejection (it does for a flash drive, but not my hard drive).
  (I have a laptop with Win 7 64 bit installed and it shows devices connected when I right click on the icon "safely remove...) »).

  I tried to turn off nonMicrosoft al and restart services but still having the same problem. In the past, I had run CCleaner to clean the registry (no, I did not indicate a restore point) and I saw on a forum how that could have created the problem. I have since deleted CCleaner

  I use Avast Antivirus, Windows firewall, SnagIt and Cobian backup. Short of re - install Win 7 (please, no) or by creating a new user and all displacement there (not even sure how to do this) is anyone know how to fix this? Or at least how I can safely disconnect my drive hard usb without messing up his data?

  Then as indicated, the user profile is corrupted

• PS CC 2014 very slow to load and function after update 2014.2

  I've updated my Photoshop CC 2014 64-bit today.  It worked perfectly until the update.  Since the update, PSCC 2014 has been very, very slow to load and slow in use.  I uninstalled used PS PS cleaner and reinstalled via the CC Office.  The problem of the speed remains.  Interestingly, the 3D is the functions Menu which seems to take longer to load.  In other words, see the program load, possibly, but 3D 6 or 7 seconds later.  I don't know if it's important.  The installation worked fine the update.

  Grateful for any ideas on what could be the problem and what I can do about it.

  My system is a 3770 K, with 32 GB of ram, x 4 SSD that dedicated to the OS, programs and other data and an Asus GTX660 (2 GB) graphics card.  I use the latest version of the driver from the Nvidia website.  OS is Windows 7 64 bit.

  I get no error message - slow all just great.

  Thank you.

  Right.  I've been tracking, with the help of the Forum of Kaspersky, KIS 15.0.1.415 file.   It seems the problem of lag with CC2014.2.

  You can find it here:

  http://USA.Kaspersky.com/downloads/software-upgrades/