Devices no longer works, usb does not get detected, CD-ROM & CD/DVD-R do not recognize disc
Original title: devices suddenly stopped working?
All my devices (that I used a few weeks very well) stopped working. Help please... I'm trying to upload pictures from my camera to my computer, but my USB is not detected. My card is not detected. And my CD-ROM & CD/DVD-R do not recognize the disc.
Hello
1. What is the brand and model of the computer?
2. you receive an error message?
3. all devices do not work on your computer?
4. the Device Manager shows all the yellow icons for unknown devices? You have installed all the drivers?
5. have you made changes on the computer before this problem?
Method 1:
You can run the fix - it from the following link.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2:
You can read the following article.
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/?kbid=310575
Method 3:
You can read the following article.
How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
http://support.Microsoft.com/kb/321641
See also:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/) How to back up and restore the registry in Windows
Explanation of error codes generated by Device Manager in Windows XP Professional
http://support.Microsoft.com/kb/310123
Tags: Windows
Similar Questions
-
Reader superdrive USB does not recognize discs
I'm trying to save a file to a CD using my attached to a Macbook Air USB superdrive and when I click Backup I continue to get messages that the drive is empty and enter a valid disk. I have tried various CD and DVD and can not make a backup.
Because it is likely still in warranty, make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.
-
"USB does not recognize the device.
After four years of working perfectly, my Acer Aspire with Windows Vista Home Premium has suddenly decided to generate warnings "USB does not recognize devices" for all external references except a network controller Linksys that needs to be changed around the ports to operate and has constant warnings "that works better on a 2.0 port." Advice please, very confusing Norfolk UK.
See if it helps:
"USB device not recognized" error keeps popping up and USB devices do not work
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/USB-device-not-recognized-error-keeps-popping-up/6be4581d-8fbd-407F-815E-b475c35ca586 -
Once I changed my ISP my computer network does not work and does not recognize my router lynsys
Once I changed my ISP my computer network does not work and does not recognize my router lynsys
Hi George,.Please go to the Microsoft Community Forums.1. do you get an error message?
2. do you have the internet connection wired or wireless?3. What is the brand and model of the computer?I suggest to refer to the links and follow the steps in the articles:Wireless and wired network problemsResources for the resolution of the problems of modem in Windows XPHow to troubleshoot wireless network connections in Windows XP Service Pack 2How to reset the Protocol Internet (TCP/IP)If the problem persists, contact the Internet service provider for assistance.I hope this helps. -
Tecra M4 - DVD player does not recognize discs in Vista
Hello
After the installation of Vista my dvd player does not recognize discs!
No update XP! It was a clean install of Vista.I found several links on the upper filter and lower registry entries this entry does not exist in my registry under the CDROM class.
I tried the XP disk it works fine and recognizes all.
Drivers are installed correctly no problem in Device Manager is invited.So I have no idea how to run it, seems to be a Vista problem
Could someone help me? I am really frustrated to this topic
Thanks for your help
Maybe this helps:
-Remove the drive from Device Manager CD/DVD.
-Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-Reboot the laptopBut what happens exactly? Which disks are not recognized?
-
C50-B-15Z satellite does not recognize discs when inserted
Toshiba Satellite C50-B-15Z
Hello! Pls my Satellite C50-B-15Z newly purchased does not recognize discs when inserted. It dosent play any CD or DVD drive, or it even recognize it at all. Pls help... What should I do?Original Win8.1 is installed on your machine?
Have you tested the feature with different CD and DVD, DVD (original)? -
New computer: DVD player does not recognize discs
I have this computer (HP Pavilion) about 3 months ago. It already came with windows 8 when I got it, is not a recent issue of download. When I put a game disc in the DVD drive for installation, it is yet to report an error, simply, it does not recognize the disc. I tried with a DVD film as well, and it's the same thing. I never used the drive before today and was super disappointed that it didn't work. New: what's more relative than all works do not, is that the system does not recognize the potential error.
Hello
Thanks for posting your request here in the Microsoft Community.
This would have occurred because of hardware or software related issues. I would like to know some information about this problem so that we can help you further.
1 have you checked the device status in Device Manager?
2 did you changes to computer settings prior to this problem?
I would suggest trying the following methods and check if it works for you.
Method 1:
Run the hardware and devices Troubleshooter and check if that helps. It is an automatic convenience store to help you solve common problems with equipment and other devices.
Follow the steps to run the Troubleshooter:
- Press Windows + Q on your keyboard to display the bar of charms.
- Troubleshooting type, and then click Troubleshooting under settings.
- Now, type Hardware Troubleshooter in the option Search .
- Click on the convenience store equipment and devices and follow the instructions to run the troubleshooter.
Method 2:
Try installing the latest drivers, including drivers for the chipset and check if the problem persists. This is to check if the problem is caused due to any driver related issues or not.
See the following Microsoft Help article to download and install the drivers.
http://Windows.Microsoft.com/en-us/Windows-8/all-drivers
Note: the steps for Windows 8.1 also applies to Windows 8.
Please reply with the status of the issue so that we can better help you.
-
Optiarc DVD + RW AD - 7717H ATA does not recognize discs
Dell Inspiron N3040 [Amin Note: Service Tag published by policy TOU], o/s Windows 7 SP1.
I want to assure you that I need to replace the DVD + RW on my Del Inspiron N3040. I ran the test Hardware diagnosis customize for the CD/DVD device. It is built in self test (test all the) first hardware test, but the test of trust returns an error message "No. disc or can not read the disc in your drive. You insert a disc that contains data such as a software installation disc if you want to try again. You want to try again? "I had inserted the Dell installation disk when I started the test but went ahead and insert another disc to install. I had the same error 'no disk... ". ». I ran the test of reading and look for and received the error message "no disk...". ». The DVD is reported in the BIOS and Windows Explorer. Windows Explorer displays the DVD in drive D:, but returns the error "insert disk". Device Manager lists the DVD and properties related material under the general tab, "this device is functioning." The DVD region is correct, the pilot is reported and the last update is already installed, but the Volumes tab shows "no media". I deleted the Upperfilter and UpperFilter files in the registry, rebooted and it still does not recognize a disc.
Is there anything else I should check or do I have to buy a new DVD player? Please notify.
Hi sjeffer01,
I think that you have correctly diagnosed a bad drive. You need to replace it.
Don't forget that Device Manager checks really just the drivers, not the hardware.
-
Satellite Pro M70: removal of the USB device causes other peripheral USB does not work
Withdrawal/use of a USB for a USB device causes devices on USB port to get affected.
Satellite Pro M70-199 (2 GB RAM)
Windows XP Pro (SP2) with all updates of Windows installed until end of October 2006.
This laptop has 3 USB ports.
An Eicon Diva ISDN USB modem is connected to a USB port.When certain devices connected to a different USB port are deleted (even if removed safely with "eject" or "remove device safely", it causes the ISDN modem to file either a double channel (64 k + 64 k) ISDN, or for the ISDM modem to disconnect completely.)
Cause this include any memory stick USB, MP3 player (ipod and creative zen) and so on.
Do other devices, such as USB external hard drives & sometimes external DVD USB drives, and sonetimes do not produce this problem.
Is this a known issue?
If it is a hardware interrupt problem, how to solve it?
This problem is related to the modem and the laptop?As a note, in addition, intermittent (random) times (cannot reproduce all the time, but it happens once or twice a day) when a USB device is accessible it causes the modem USB ISDN to drop a single channel, even if the lights on the modem still show it as it is connected. In this case and the case above, the only way to get the modem ISDN USB running again is physically disconnect and reconnect.
The reason why it is a crucial issue is that:
(1) the modem speed is halved or disconnected
(2) the ISP continues to full rate for a double load connection even if a channel has been dropped.Any help will be greatly appreciated.
Here is some information on USB devices, followed by some information about IRQ settings.
Driver date 01/07/2001
Version of the driver 5.1.2600.2180
Driver provider Microsoft
File INF usbport.infDescription of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
Location Information PCI bus 0, device 29, function 0
PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
Device resources
IRQ 23
Port 1800-181FDescription of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
Hardware ID PCI VEN_8086 & DEV_2659 & SUBSYS_FF001179 & REV_03
Location Information PCI bus 0, device 29, function 1
PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
Device resources
IRQ 19
1820-183F portDescription of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
Hardware ID PCI VEN_8086 & DEV_265A & SUBSYS_FF001179 & REV_03
Location Information PCI bus 0, device 29, function 2
PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
Device resources
IRQ 18
Port 1840-185FDescription of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
Hardware ID PCI VEN_8086 & DEV_265B & SUBSYS_FF001179 & REV_03
Location Information PCI bus 0, device 29, function 3
PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
Device resources
IRQ 16
Port 187F-1860Description of the driver Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
Date of the driver 06/01/2002
Driver Version 5.1.2600.0
Driver provider Microsoft
File INF usbport.inf
Hardware ID PCI VEN_8086 & DEV_265C & SUBSYS_FF001179 & REV_03
Location Information PCI bus 0, device 7 function 29
PCI Device Intel 82801FBM ICH6-M - Enhanced USB2 Controller [B-1]
Device resources
IRQ 23
Memory B0000000-B00003FFDescription of the device resource sharing
DMA 04 exclusive Direct memory access controller
IRQ 00 exclusive system clock
IRQ 01 exclusive Standard 101/102 key or Microsoft Natural PS/2 keyboard
IRQ 08 exclusive system CMOS/real time clock
IRQ 09 shared system compatible ACPI Microsoft
IRQ 11 shared Intel (r) 82801FB/FBM SMBus Controller - 266 a
IRQ 12 exclusive pointing Alps-device
IRQ 13 exclusive Numeric data processor
IRQ 14 exclusive Primary IDE Channel
IRQ 16 shared generic CardBus controller
IRQ 16 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
IRQ 16 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2662
IRQ 16 shared Mobile Intel (r) 915GM/PM Express PCI Express Root Port - 2591
IRQ 16 shared ATI MOBILITY RADEON X 700
IRQ 17 shared Realtek AC97 Audio
IRQ 17 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2660
IRQ sharing 17 Texas Instruments PCIxx21 Integrated FlashMedia Controller
IRQ 18 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
IRQ sharing 18 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
IRQ 19 shared host controller Standard SD compatible SDA
IRQ 19 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
IRQ 19 shared Intel 82801FBM Ultra ATA Storage Controllers - 2653
IRQ 20 shared of TOSHIBA software modems
IRQ 21 shared Realtek RTL8139/810 x Family Fast Ethernet NIC
IRQ 22 shared Intel (r) PRO/Wireless 2200BG Network Connection
IRQ 23 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
IRQ 23 shared Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
Post edited by: sakhri
Hello
I have Satellite M70-159 and I didn t notice any strange problems with the USB ports. I use a few of them as printer, webcam, USB, memory stick, optical mouse, and external HARD drive. The devices are recognized correctly and I always remove without option delete without danger.
Now I have Vista pre-installed and there is no problem so far. If I understand you right USB ports work fine but there is problem with USB modem only. Am I wrong?
Also try to contact the producer of modem support. Is perhaps the question like this known and if all goes well, they have a logical explanation. -
USB does not recognize the Garmin unit. Error "unknown device".
Recently, addition of windows 7 Home premium stopped detecting my garmin unit. Other USB devices such as my ipod work very well. I was able to detect the Garmin only a few times, he would try to install the drivers, but the drivers would not install. The garmin was working a few weeks ago. Here is a list of what I've tried:
- Reset (after all what I try)
- Turn off the computer and leave it unplugged overnight
- Completely uninstall all the drivers and the software associated with the kid.
- manual installation of drivers
- uninstall the unknown device and search for new hardware
- uninstall the unknown device and do a search for legacy hardware (which produces a device does not not (Code 10) error)
- Go back to a restore point before updating the last windows
Please, any help would be much appreciated. I'm decently computer savvy and have always been able to solve any problems that I have. This one had turn me my wheels for days.
Thank you
LHello
Try to connect to your garmin unit on another computer in Windows 7 and check if it is recognized.
See this article to fix the error code 10:
http://support.Microsoft.com/kb/943104/
You can also post this question to the garmin forums to get help.
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
A Wi - Fi connection does not work. Does not recognize Fn + F8
Trying to help my boss with a problem that seems to have his laptop. His computer could not get along with wifi.
Does not yet recognize her here. I did some research and tried to install the new drivers and flash cards causes the Fn + F8 button does not work. When you press them, the display shows the rest of the keys F, but F8 is not there.
Nothing is done, nothing.
Hardware problem?
As a first step, you should tell us what model laptop was your boss?
What operating system is installed?
Laptop is preinstalled with original Toshiba (factory settings) recovery image?
Wireless network card is recognized correctly in the Device Manager?....
I mean without some basic information it is not easy to start serious discussions, isn't it? -
I downloaded driver boost, but found no drivers.
Hello1. you use an external CD drive?2. What is the error message/code exact displayed when you use your CD player?3. which edition of Windows that you are using?Example Windows 7 Professional 32-bitPlease specify the problem you are experiencing.If you are facing this problem with the USB ports on your computer, then follow the links below to solve the problem.Method 1Tips for solving problems of USB devices
See also, update a hardware driver that is not working properly the above mentioned link.Method 2My drive does not appear in Windows Explorer
If the material you use is the same material that is mentioned below, then they are compatible with Windows 7 and do not need additional drivers to use.
I hope this helps. -
Hello.
When I try to change the settings of iTunes store password does not work: System doent recognize the apple ID account password
Sign out and then sign in again the apple between the device and what not ID recognize the password very well, but when Im going to change all password parameters, system ask me the password again, I write and ask again... n times.
I tested in different devices, iphone and ipad, with two different accounts and beta of ios 9.2 and 9.2.1. Still the same error.
The problem is that when I try to download a free app from app store ask me the password and does not work so I can't download any new script.
Thanks for your help.
Best regards.
Hello bdepaco,
Thank you for using communities of Apple Support.
I see that you have any questions, change your password ID Apple via iTunes. Have you tried to change your Apple ID account page? Take a look at the following article for the steps:
Once you have changed your Apple ID password, it presents a few additional measures to be taken.
What to do when you have changed your Apple ID email address or password
Best regards.
-
USB does not recognize anything
I have a Toshiba A60-S1662. A USB port. The port has power, drivers are loaded, and it has a brand new XP Pro SP3 OS. The hub will not recognize anything I plug in there. I have assigned driver but refuses to play nice.
It seems to me that it is hardware problem of your USB port.
I downloaded the manual of your laptop and there is a slot of your laptop where you can insert "PC Card". PC card can contains the USB port.
More information on PC Card:
http://en.Wikipedia.org/wiki/PC_Card
LC
-
Satellite L50D-B - faulty DVD drive does not recognize discs
Bought 2 months ago. The reader agrees not the CD, DVD or anything like that.
The name of the drive does not appear on the disc and if you double click on the DVD drive icon (even if a disc is inserted) the drawer opens and says please insert a disk. I tried several discs are not the issue.So far I got technical support where I bought it.
They said to do a reinstall I did - with the full drive clean. I tried to update the drivers, but the computer insists on the fact that they are later. If I search my model number on the site of Toshiba driver support he gets rejected, and I have no access to (Toshiba) drivers.I checked a few other forums and tried the regedit fix, but which is also irrelevant. If no solution is found (and I've lost hours of my life on this subject) then this laptop is going back for a refund and I'll get one who will perform the simple task of playing a DVD.
Windows 8.1
PSKUQA - 01300-SHello
Sorry to hear that you have such a stupid problem with your machine. On this virtual path, it is not easy to say what the problem is here.
In my opinion you should not waste your time checking and search for some drivers who probably will not help at all.Reinstall the original operating system that you have with your machine and test functionality with the factory settings. If the result is the same contact your reseller or Toshiba service provider directly and ask for help. They can check ODD and Exchange if necessary.
Maybe you are looking for
-
Whenever I start Thunderbird it freezes with Avast
Once a minute or so, it freezes. Now I've discovered, it seems like if it happens when he tries to update from 38.3 to 38.4. If this is the cause or one, is irrelavant I don't know. I run Windows 7 Profesional
-
'Bluetooth is not ready' on my laptop
The pre-installed bluetooth software works very well, since the laptop was purchased, until it suddenly collapsed bluetooth icon appear on the taskbar. When I try to connect to my mouse, the system responds indicating that "Bluetooth is not ready." I
-
Qosmio F60 - 10J: black screen after XP Nvidia GT 330 M driver installation
Hello On my Qosmio F60 10J, I installed windows XP on a DD of esata, I found almost all the XP drivers. XP works well, now...I downloaded GT 330 m XP drivers on the Nvidia site because the Web from Toshiba site, it's only for Windows 7. I installed t
-
Hello I am trying to hook my LG to my N97 netbook. Nothing spectacular to send files. I have the Bluetooth Stack (T) v.6.40.02 with windows XP. I did (right-click on the system tray icon Bluetooth-> Options-> Security-> Custom Level-> Mode: level of
-
the password of bios HP 8440 p
Hello I have a hp laptop 8440p opportunity and it has a bios password protected. Could you help me?