Diablo 3 Runs slow, help please.

Similar Questions

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

• Diablo III runs slow on my pc, not that I need to update my video card and power supply

  I have a HP Pavilion p6523w. I can run diablo 3, but it is extremely slow and I guess that choppy looking. I tried to work with blizzard on the problem, but it's slow going. I have looked and can't find anything concrete, but feel that my video chip can simply don't have the necessary ooomphh. But before I go out and spend money on things I didn't need. I thought someone here might be able to help out me.

  :-)

  Yes - but what happens if you want a better card next year that requires 550W?
  OK this requirements are without physical limits at all - it also depends on what you have changed or that you want to change next to the graphics card - an additional audio card? Other cards? A second HDD? Another drive?

  Just check out what is offered, if you can get a 550W without much more money, then take it. Look for a big fan - he will be more silencer/cooler.
  It will of course make no sense to take a 1000W for an additional card.

  Look at what is offered in your area.
  Maybe Enermax, Thermaltake?

  Check tests of the computer sites.

  C.

• Computer a real slow HELP Please!

  I use vista and had a problem on the computer (don't turn off either) so I removed the battery when you restart it suggested do us a system restore.  The computer will try to do the restore, but we continue to a message that the restoration could not be completed.  The computer has become incredibly slow since that time and makes us crazy.  I did virus analyses and also the analysis of malware and have been unable to find anything wrong. (we defrag and cleaned the files nothing helped).  Can someone please.  Thank you, Laurie

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------------------

  After the above, use this utility.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 the love of the updated drivers that can drastically affect the performance so I would update the main
  drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Need help with performance android... very slow, help please

  Hello guys

  We are developing an application for android and ios

  I use Adobe Flash CC 2015 - Adobe Air 21

  It of kind of big and complicated coding and a lot of Images, loaders, etc...

  in ios, it is almost ok, but in his crappy slow android!

  I mean, it's it takes like 15 sec to even run the application.

  I put the rendering to GPU mode - I use greensock interpolations.

  I have a lot of vectors, bitmaps, so

  I thought about moving to the framework of starling, do you think it helps?

  If so, what codes should settle there?

  I mean that Starling would I use each unique code gives me for parts?

  Touch listeners? or Chargers? or?

  I need to know these because I don't have a lot of time, and it's a loooot so change

  What is the most emotional in the performance and memory management?

  Please let me know if you have a tip

  It is really important

  Thank you very much

  Sam

  There is no single simple answer to optimize performance.

  However, you can usually improve performance by learning how to use cacheAsBitmap and cacheAsBitmapMatrix and they often give the biggest improvement with the least effort.

  Here is an excerpt from a chapter in development of Flash games: in a Social, Mobile and 3D world

  Chapter 7

  Optimize the performance of the game

  Easier to the more difficult to implement

  1. do not use the filters.

  2. always use the reverse for loops and avoid loops and avoid while loops.

  3. explicitly stop timers for their loan for gc (garbage collection).

  4. use the weak event listeners and remove headphones.

  5. strictly type variable when possible.

  6. explicitly disable interactivity mouse when interactivity smile not necessary.

  7. replace dispatchEvents with callback functions whenever possible.

  8 it would be gc stop sounds for the sounds and SoundChannels.

  9. use the DisplayObject most basic need.

  10. always use cacheAsBitmap and cacheAsBitmapMatrix with air applications (i.e., mobile).

  11. reuse of objects when possible.

  12 Event.ENTER_FRAME loops: use different listeners and different listener functions applied to DisplayObjects as little as possible.

  13. the pool instead of creating objects and gc objects ' ing.

  14. use partial blitting.

  15. use step blitting.

  16 use Stage3D.

  Biggest advantage less

  1. Use the blitting Stadium (if there is enough memory system).
  2. Use Stage3D.
  3. Use partial blitting.
  4. Use cacheAsBitmap and cacheAsBitmapMatrix with mobile devices.
  5. Disable explicitly interactivity mouse when interactivity smile not necessary.
  6. Do not use filters.
  7. Use the most basic necessary DisplayObject.
  8. Reuse objects whenever possible.
  9. Event.ENTER_FRAME loops: use different listeners and different listener functions applied to DisplayObjects as little as possible.
  10. Use reverse for loops and avoid the do loops and while loops.
  11. The pool instead of creating objects and gc'ing.
  12. Strictly, type variable when possible.
  13. Use weak event listeners and remove headphones.
  14. Replace dispatchEvents by the callback functions whenever possible.
  15. Explicitly stop timers on loan for the gc.

  16 stop sounds for the sounds and SoundChannels be gc would be.

• Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

  Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• My browser is running do not. I uninstall, install several times. Uninstall cookies, delete the data from the user, install in another user - no reaction. What's wrong? Help, please

  My browser is running do not. I uninstall, install several times. Uninstall cookies, delete the data from the user, install in another user - no reaction. What's wrong? Help, please

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  Start your computer in safe mode with network. Then launch Firefox.
  Try the sites secure web. Is always the problem?

  Start the computer in Mode safe;
  Free online encyclopedia

• Urgent need help: I run windows 10 on iMac. I can't boot into Windows 10 after update to El Capitan 10.11.5. Help, please!

  An urgent need to help!

  I've been running Windows 10 on my iMac via Boot Camp. I just upgraded to El Capitan 10.11 to 10.11.5. I don't know if it was because of this upgrade that made me not be able to return to Windows. In the windows startup disk, my windows HD and OS X HD icons are all grayed out. So, I can't select which one to be my default startup Mode of the disc. Help, please!

  Pisheng D.

  Unlock you the boot floppies pane by clicking the lock button? Look at the lower left corner of this screen.

  

• I am running windows 7 and trying to download Firefox 3.6 with no luck. Need help please!

  I found the site where you are supposed to beable to run a "downgraded" firefox but when I downloaded and the installer came it would not go forward unless that I've upgraded to the new point 10 something.

  I'm under edition first windows 7, 64 bit. Pretty junior to computers so if someone can help please be very specific and do it point by point, lol.

  You can install the portable version of Firefox 3.6.x to access Web sites that don't work with Firefox 5 +.

  • http://PortableApps.com/apps/Internet/firefox_portable

• I am running windows 7. We have updated firefox and it would be more open. I uninstalled and reinstalled from Web site of firefox. I click on the firefox icon and it does not open. Help please

  It installs and I tried to launch the browser and it never starts. I tried to uninstall, but it says firefox is running. I restart my computer and uninstall and try again. It always opens not once installation is complete. Why didn't he ever open? Help please!

  Yes, delete the folder of the program Firefox after uninstall, then reinstall it as an administrator.

• How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  Hello

  Choose indoor walk or run Indoor (it does not matter which) to an indoor walk-run routine.

  Even if Apple Watch does not currently offer as a workout interval training, choose one of these allows the most appropriate data sources (which are the same for market and short) to use to track your training.

  If walking or running, the accelerometer is used to estimate pace and the distance (allow your arms swinging naturally) as well as the frequency heart sensor for the estimation of calories burned.

  Run or walk inside will not affect your calibration data. Calibration is based on the GPS of the iPhone data and is only held during the outdoor walking training or race outdoors when the iPhone combined is taken along.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• When I opened my computer it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!

  Can someone help me please, I don't know how to use a computer I was googlen 4 days! When I opened my computer it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!

  From what you say, you are probably unable to start Windows.

  In this case, when you start the computer, keep tapping the key "F8" on the keyboard until the Advanced menu comes up. Then choose "Safe Mode".

  You will see something like your ordinary, here to enter office "chkdsk volume: /f" (replace with your hard drive volume, in most cases, it's 'c') at the command prompt.

  For reference:

  http://support.Microsoft.com/kb/315265

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My secondary hard drive (f) disappeared. However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.

  My secondary hard drive (f) disappeared.  However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.

  Hello what jay,

  Thank you for your message.  Please, try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on "disk management".
  Here you see secondary hard drive?
  If so, you can assign it a drive letter and everything should be good.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I run vista on my laptop, but want to play the old games that need XP. Help, please!

  I run vista on my laptop, but want to play the old games that need XP.

  I was told on the microsoft site a xp free download that you can run on the computer next to vista (when the computer starts, you have possibility to xp or vista to run) to play with older games in this regard.

  Is this true, if so where can I find it? Help, please!

  Hello

  You think for Windows 7 XP mode.

  This is how to do it on Vista.

  "Using Windows 7 or Vista Compatibility Mode.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  "Make older programs run in this version of Windows".

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  See you soon.

• Help, please! I get an error message that access is denied 0x80070005 when I try to run the backup facility.

  I use Windows Vista as administrator and use the automatic installation of Windows to save everyday on an external hard drive - this has been fine for months and nothing has changed, but now I get the error message and can save is no longer. I tried to disconnect the external hard drive and reinsert and the drive is recognized. Back up to start running for awhile and then fails. Can anyone help please?

  Hello

  Using third-party backup program or windows backup?

  Method 1
  Step 1: I would suggest that you start the computer in safe mode and then run the backup files.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If you are able to run backup ins fine safe mode, and then perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  Method 3
  Under your administrator account, get full rights and take possession of all the C:\ drive using the following procedures.
  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.