DIADEM too slowly when it runs.

Similar Questions

• Why my video clips will run too fast when played on the monitor Panel?

  I posted my problem earlier today, but in re-reading it maybe I didn't explain well enough.

  My main question is: "why my video clips will run too fast when played on the monitor Panel.  It comes from occurring after I selected my media in the Panel tasks and placed in the correct order in the Timeline/timeline.  I knew something was wrong when I saw that the clips did not indicate their right length when it is displayed in the timeline (scope).  They have been compressed in only a few seconds, then the clips should have at least 5 minutes.  I ran the clips in the monitor and of course they ran too fast, with a lot of jerking movements.

  3 video clips, I'm doing a PAL HD video taken with my Nokia N8 mobile video camera. Here in mp4 format. This may be a problem?  Note that when I play these individual HD clips on my computer (Windows Media Player) they work perfectly.

  After that I put the clips in my project Panel (or before in the work space organize), I have perforned no modification or manipulation of clips.  They are in their original state.

  Simply too check that the clips do not appear to be compressed, I burned a DVD, the resulting video ran in a few seconds.

  Help would be greatly appreciated.

  What is your project Preset?

  If you right click on the items in the project Panel, then choose Properties, which is displayed for the FPS?

  It could be that the FPS flag is not picked up by the GER, and if this is the case, you should be able to fix this by choosing to interpret the film and by changing the FPS to 25.

  Hope that helps and good luck,

  Hunt

• Satellite A500 - game starts only when you run fraps

  Hello

  I have a Toshiba Satelite A500 with an i5, nvidia GT330M with 4 GB of RAM card, I only use drivers for toshiba and in dead rising 2 there are some significant slowdowns tried

  Patches as rename the dead rising2.exe etc., it did not work, I play my resolution 1366 x 768 and with shadows and zombies at the top with 16 AF, leaving the vertical sync, sampling and blur to the broad, the game is full of similar slowdowns trolling (character begins to run slowly).
  More funny thing is that when I recorded with fraps (lock the framerate on) I can play smoothly with no slowdowns at all, I even tested and set of 4 complete (AA) and turned on the vertical sync and the game was playable with no slowdowns on very large crowds of zombies, when I play normally without stil fraps recording, when the game slows down Press f9 for fraps to start recording and the game starts immediately

  Race "smooth", fraps makes very large files and in a short time it would fill my drive, the program limits setting I tried but delays were still present:-no opinion on this subject or

  possible correction for the game?

  Hi fiurion,

  Very strange what s... To be honest I never heard tell that it is only possible to start the game when you run fraps...

  You have installed an antivirus or firewall program that could block the start of the game?

  Also I recommend that you install the latest version of DirectX and display driver.

• Everything on my XP request too what program to run and the absolotly nothing works

  Everything on my windows XP application too what program to run and the absolotly nothing works has a virus and removed and that's how he left me nothing works virus disappeared, but all that happens when I try to open anything is what program I select the program, it must be running and then it asks which program to run again with this thing I just want to reset or repair but I can not even Get factory reset to work cause the recovery disks don't download help me please?

  more old XP and tried to use just the hidden reset the score at the factory, but apparently its not still installed, it's a nightmare, nothing works at all the

  Example: I try to open itunes shortcut fail... what program you want to run this with... Browse, go to itunes, click on the main iTunes or any other program folder so she asks what program you want to run this with and so on and so fourth and it does with absolutely all programs on my computer

  Example 2:i tries to go to the control panel to use anything, and almost all alone there is an error no internet Explorer doesint work go if I'm going in, it just stops, but I can't go to google... and all that fun stuff

  no idea on how to solve this problem would be insanely useful thanks

  Windows XP file Association problems
  http://www.dougknox.com/XP/file_assoc.htm
  EXE file Association problem (association of default restore for EXE files)
  LNK (shortcut) file Association Fix (restores default shortcut behavior)
  HTM/HTML Associations (Restore the default associations for htm/html files) and/or
  URL file Association problem (restores default associations for URL - Internet shortcuts)
  COM file Association problem (restore the default associations for COM files) - thanks to John Hanney
  Difficulty of file Association (restore the default associations for BAT files)
  CAB File Association problem (restore the default associations for CAB files)
  CPL file Association problem (restore the default associations for CPL files)
  COM file Association problem (restore the default associations for COM files) - thanks to John Hanney
  Directory Extension difficulty (restores default HKCR\Directory)
  EML file Association problem (default restorations for the EML files)
  EXE file Association problem (association of default restore for EXE files)
  File Association problem (restore the default associations for file folders)
  HLP file Association problem (default restore for HLP files associations)
  HTM/HTML Associations (Restore the default associations for htm/html files)
  ICO file Association problem (restore the default association for ico files)
  INF file Association problem (restore the default binding for the INF files)
  Internet Explorer Desktop Icon problems (restore the default behavior for the desktop IE icon)
  Difficulty of Association JPE/JPG/JPEG (restore the default associations for jpe/jpg/jpeg files)
  LNK (shortcut) file Association Fix (restores default shortcut behavior)
  MPG/MPEG File Association problem (restores default associations for MPG/MPEG files)
  MSC file Association problem (default restore for MSC files associations)
  MSI File Association problem (default restore for MSI files associations)
  MSP File Association problem (default restore for MSP files associations)
  REG file Association problem (default restore for REG files associations)
  SCF file Association difficulty (default restore for SCF files associations)
  RCS File Association problem (default restore for SCR files associations)
  TXT file Association problem (default restore for files TXT associations)
  TIF/TIFF File Association problem (restores default associations for TIF/TIFF files)
  URL file Association problem (restores default associations for URL - Internet shortcuts)
  VBS file Association problem (restores default associations for VBS files)
  ZIP file Association problem (restores default associations for ZIP - file REG folders)

• The computer says to run chkdsk b/c the program files are corrupted. When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk. When I reboot, the chkdsk never runs.

  Original title: Program Files gone?

  Recently, I started my computer and noticed that a bunch of files are corrupt, and left most of my shortcuts.  I went into Program Files and discovered the entire file completely empty.  The computer says to run chkdsk b/c the program files are corrupted.  When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk.  When I reboot, the chkdsk never runs.

  My wife has all of its graduates work on the computer, I backed up since then, but I try to avoid doing a restore of the entire system.  Can you help me?

  I am running Microsoft XP.

  Sorry to hear that you are having problems with your XP system.  For XP support please visit the link below
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.General

  Also, try to start the computer in Mode safe.
  When the computer is switched on 1, start pressing F8 until you get a menu of Windows startup, choose Safe Mode.

  Sounds like something important happened (corruption).  If you have important data there (for example, your wives, diploma work), I would strongly suggest taking the computer to a qualified technician so that they can recover data out of there before the drive goes down or the o/s is too damaged.

  Good luck

• HP DESKJET 1510: print too slowly

  Hello, I got hp Deskjet 1510 printer yesterday, I installed it successfully but when im trying to print prints too slowly I don't know why I tried to take the cartridges too see if that is the problem but it was not she always feel too slowly and its so boring

• HP G6 works too slowly

  Hi Experts,

  I'm using HP G6 2225TU, Win 7 x 64.

  Whenever I read the 3D mode videos full screen. He plays well but can't return to the small screen. Even using the keys. Alt + Ctrl + delete "esc" or "start" key board.

  Sometimes it works too slowly with 3D movies, just a few times.

  Any suggestion please.

  Hi, @SheikhSahib

  It seems that you cannot quit an application after using full-screen mode, the laptop is running slow for you. I'll try to help.

  What program are you looking at in the video? Have you tried others?

  This can help to speed things up: improvement of system performance without adding memory (Windows 7).

  I hope this can help.
  Thanks for posting on the HP Forums.

• NullPointerException when app running, but don't not during debugging

  When I run my app in the Simulator I get a nulpointerexception, but when I debug in the Simulator even I get no exception.  Has anyone seen this behavior before and how can I find the source of the exception?

  I tried this a couple of simulators.  There's a place in my code I know wherever I knocked a nullpointer but this exception is caught by the debugger with a catch (Throwable t) {...} line.  Catch (Throwable) does not work in run mode?

  I use JDE 5, 9550 and 9530 sims, eclipse 3.5.2 plugin 1.1 and compliance of java 1.5

  By adding an extra

  catch (NullPointerException e) {}

  block that now my exception gets handled.  The final catch blocks look like this:

  try{
  ...
  //code that throws nullpointerexception
  ...
  } catch (NullPointerException e) {
      lat=0;
      lon=0;
  catch (Throwable t) {
          lat=0;
      lon=0;
  }
  

  Seems to me the catch (Throwable t) should work in run mode too.  Is NullPointerException not a throwable in run mode?

  -Peter, I did not look into the timing stuff.

• Microsoft Teredo Tunneling adapter does not work correctly and my pc works too slowly to start and stop.

  Original title: hardware device

  Please help me...

  My Microsoft Teredo Tunneling adapter does not work correctly... I tried to reinstall it but it is impossible to install...

  So what to do so adpter may work correctly...

  And my pc runs too slowly (at startup and shutdown also)

  Help help me soon...

  Thank you...

  Hi Harshhh36,

  Usually, after the computer restarts, the drivers install automatically and it will stop the errors.

  You can also refer to the computer or the network card manufacturer's Web site to download and install the latest version of the drivers for the network card.

  You can also check in the updates of windows updates available for the network adapter driver.

  For more information, see the article:

  Automatically get recommended drivers and updates for your hardware

• Internet connection is too slow when downloading store

  Original title: stor errory that the internet connection is too slow

  I get an error message indicating that the inernet connection is too slow when I try to buy anything at the store. everything works when I'm connected. the store is the only app that gives me this message

  Hi Reg,

  Thanks for choosing Microsoft Community Forums.

  You are facing problems of downloading in Windows store as the process is very slow. I will definitely help you.

  I suggest you follow the instructions in the methods below to fix Apps.

  Method 1: Follow the steps to clear the cache to store:

  1. Press Win + R keyboard
  2. Type of WSRESET. EXE and press ok
  3. Restart the computer

  Method 2: Run the troubleshooter Windows 8 App.

  This utility automatically solves some issues that may prevent your running applications, including the suboptimal screen resolution and security or incorrect account settings:

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 3:

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support

• Display problems when you run applications JavaFX 2.0 with multiple monitors

  I noticed a number of issues when running JavaFX 2.X applications on a system with multiple monitors. My setup consists of 2 monitors (primary and secondary on a dual graphics card) and my third on a separate graphics card.
  
  The questions I have observed are,
  
  (1) the application is not too sensitive when running on the second or third monitor.
  
  (2) when the application runs on 2 monitors and re-tire it will only redraw correctly on one of the monitors. The application will be displayed as a black box on the another moniter
  
  (3) where the application does not run on the primary monitor and a ChoiceBox is selected choice appears as expected but it blackens the application in the background.
  
  Someone else encountered similar problems? I'm going to raise a JIRA with screenshots and details of my system if other people are able to confirm that they are also suffering from similar problems.

  Hi, I had similar problems. My application uses 2 monitors and now everything works just perfect. It turned out that the interface is causing these disorders. I changed mine, then he worked (actually more the new installed I also had to update the driver for the new interface)

• Members parents not updated when you run tot.

  I have a scenario where even if low level members change the parent members are not updated when we run an agg
  
  For example, if low level member was 150 and we run the aggregate numbers are fine. If the Member of low level is passed to #Missing parent members are not updated when we run the tot.
  
  IN the script below, we use DIM(COstCenters,SpaceTYpe) CALC
  
  My concern is the SET FRMLBOTTOMUP ON setting I use, because it looks like he will ignore this block. How can solve this problem without affecting the performance too. For example using SET CREATEONMISSINGBLK WE could help, but will have an impact on performance
  
  Here are the details of the script
  
  SET MSG SUMMARY;
  SET FRMLBOTTOMUP
  SET CALCPARALLEL 4;
  
  DIFFICULTY ('Budget', 'Version1', 'Ex2011', 'RSF', 'No_Period', 'M3', 'M6', 'M9', "M12", @IDESCENDANTS("$1"), @LEVMBRS
  (SpaceType,0), @LEVMBRS(CostCenters,0))
  DIM CALC (ManagedBU, AllocatedBU);
  
  ENDFIX
  
  
  
  DIFFICULTY ("Budget", "Version1", "Ex2011", "RSF", "No_Period", "M3", "M6", "M9", "M12", AllocatedBU, ManagedBU,
  @LEVMBRS(SpaceType,0), @LEVMBRS(CostCenters,0))
  
  "$1";
  
  ENDFIX
  
  
  / * Aggregating numbers for the report so it could be read n a high cost central level * /.
  
  DIFFICULTY ("Budget", "Version1", "Ex2011", "RSF", "No_Period", "M3", "M6", "M9", "M12", @IDESCENDANTS (AllocatedBU), @iDESCENDANTS (ManagedBU), @IDESCENDANTS("$1")
  )
  
  DIM(COstCenters,SpaceTYpe) CALC;
  
  ENDFIX
  
  
  / * Numbers for the concentration ratio so it could be considered a regional high-level * /.
  
  DIFFICULTY ("Budget", "Version1", "Ex2011", "RSF", "No_Period", "M3", "M6", "M9", "M12", @IDESCENDANTS (ManagedBU), @IDESCENDANTS (AllocatedBU), @IDESCENDANTS (SpaceType), CostCenters)
  
  @IANCESTORS("$1");
  
  ENDFIX

  The first thing I would try would be to add that the parameter SET to AGGMISSG. IF the database is set to off then if all children of a member are missing then the parent will retain its value. If aggmissing is enabled, then it always overwrites the values parent with the calculation of the values of the child.

• Login page not coming up when I run the application!

  Hi all
  
  ORACLE 11G, 3.1.2 APEX
  
  I'll have an application with multiple pages and have the login page too. I use the account database as the logon mechanism. When I run the application, my login page is not coming sound directly to come with an application page that the user gets in once the connection is successfully.
  
  Can I know why the login page does not come on the screen when I run the application!
  
  
  
  Pls let me know as soon as possible!
  
  
  Thank you/kumar
  
  Edited by: kumar73 may 18, 2010 09:00
  
  Edited by: kumar73 may 18, 2010 09:29
  
  Edited by: kumar73 may 18, 2010 09:29

  Looks like all your pages have authentication value "Page is Public. Change them to 'Page requires authentication' with the exception of the login page.

• get the error when you run bootcamp on Sierra

  When you run Bootcamp-can not go beyond the second screen that gives me an error of pop-up windows 'startup drive must be an OS X extended (journaled) formatted partition.

  Workaround attemps I have partitioned my drive native and also used an external hard drive, both in format OS X extended (partitioned).

  I tried to use bootcamp years ago and ran across similar see the questions to stop. I thought I'd try a second time to run Winzozz 10. So frustrating!

  OS X Terminal, please after the release of

  diskutil list

  Apple does not officially support Windows on external drives. Microsoft is only supported under Windows Enterprise.

• When I run firefox v42 mac, the Preferences tab load as well

  When I run Firefox version Mac 42 on Mountain Lion, my homepage loads perfectly, but another 'Préférences' tab always seems to load as well. How can I stop this other tab from loading? Thank you, Ken.

  Hi Ken, one of the possible reasons are if the preferences page has been added as a second 'Home tab' in which case it will be displayed in each new window (Cmd + n) and every time that you click the Home button.

  To verify that you can use the preferences, the general Board, the section to start page, as described in this article: start-up, homepage, tabs and download settings.

  In the area of the Home Page, look for a vertical bar separating two addresses of character. A simple example with short URLS:

  https://www.mozilla.org/|about:preferences
  

  The bar certainly can be hard to spot with long URLs, but when you find it, delete everything to the right of the bar, then the bar itself (I suggest to remove the last bar so things don't accidentally get it together).

  Was she?