Diagnostic policy service & reboot

Hello

A couple of days my computer stopped connecting to the internet after having no problems before. I 'fiddled' around with her and finally found the DPS is the question. Then, I stupidly put the system to reboot once he had felt that the DPS was falling. I've read in this forum for ideas on how to get the right DPS, but my computer restarts just once it lights gives me no time to go to work on the DPS problem! How can I fix this?

Try to start safe mode and see if you still have the problem of restart.  If not, go to services and fix it and the problem is solved.

If this does not work, use a disk to boot into Recovery.  If you have a genuine Vista installation disc that works. If you do not have a disc, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (perhaps made on another computer).

Once there, follow the instructions until you get a menu and choose command line.

Type cd C:\Windows\System32 and enter.

Type listsvc, and then enter.

Find the service of the cause of the problem.

Type disable and enter.

Now, remove the disk and restart.  I think that if the service is disabled, it will not cause a reboot (where it can if it is enabled, but stopped).  Now, you can make the changes you need.

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • The diagnostic policy service 5 error: registry will not accept permissions__

    A lot of my services will not work because they are dependent on the th diagnostic policy service. When I try to read the dependencies on the DDA, I get "critical error from WMI. I have spent many hours, as a result of many suggestions, but still cannot solve this problem. Lately, I've made the change Reg suggested in this forum, add TrustedInstaller to settings. I clicked to give total control, but when I clicked 'Apply', the check for permissions marks have been removed. I did it five times with reboots. The registry does not accept these amendments. Can you please specify?

    HI Joan,

    I recommend that you check your profile for corruption:

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Wireless not working and from "diagnostic policy service" gives error 1053

    Hello

    I have a problem with the connection to wireless internet. The router is working because I can get online to other computer and iphone. The question seems to be from my laptop.

    Laptop: Sony Vaio VPCEA
    Windows 7 Home Premium

    I was able to connect to the wireless using this laptop last night, but today in some sort it has stopped working. When I try to connect it says "restricted access". I have tried rebooting, removing the memory and of course Google wireless network, but nothing seems to work.

    When I tried to solve the problem, it says "diagnostic policy service does not work. So I went into Services and tried to turn it on (START) "Political diagnosis Service" but it gives me "error 1053: the service has failed to demand launch or control in a timely. I read online to install .net Framework 1.1 service Pack1 to get rid of this problem. But which is not supported by Windows 7, the more I installed 4.0 Framework, which should have taken care of this problem.

    Another suggestion is to disable the firewall and I noticed that my firewall is already turned off and I can't turn it on. I had the external anti-virus software, which I removed for this problem, but nothing works! When I tried to turn on the Firewall Services' Windows I get an error 1068: the dependency service or group could start. Dependence are: Base filtering engine and Windows Firewall authorization driver. Who do not start.

    I tried fixing the registry using the Wise Registry Cleaner. Clean something, she has not fixed any problems yet.

    Help, please. I'M FRUSTRATED!

    Thanks in advance!

    Hi bberringer,

    The original message has been able to resolve error 1053 by reinstalling Windows. If you have not reinstalled Windows, I would say the following steps before you spend money on the circuit board. If you already try reinstall Windows and always have failed, I suggest the internet search (or the site of the manufacturer if your computer is a Dell, Acer, HP, etc.) for the same or a Platinum compatible as prices can vary according to your computer brand and model.

  • 'The diagnostic policy Service is not responding' after updating iTunes

    I received error message 'The diagnostic policy Service is not responding' since my wife click and ran an update to iTunes. I tried to remove iTunes and restarting, the system restore and sfc/scannow. Any other suggestions?

    Hello

    I suggest that you follow the steps below and check if the problem persists.

    Step 1:

    a. Click Start, type "Services.msc" in the search box, and select 'Services '.
    b. search for 'Diagnostic policy Service' and right-click and select "Properties".
    c. now, restart the service as well as addiction services

    Step 2:

    Test the issue in a clean boot State, and check if the problem persists.

    Note: Follow step 7 to your computer as usual.

  • service or group of addiction was able to start; Cannot start the diagnostic policy service

    I have windows vista Home premium. I did have a problem connecting to internet before. So today, I can't connect to my router, either by wireless or ethernet.  The router is fine, because my roommates are able to connect.  The signal is also excellent, but my computer is "connected with limited access".   The message I get is: 'unknown connection status. The dependency service or group was able to start. "" When I click on diagnose and repair, it says Network Diagnostics cannot run because the Diagnostics Policy Service is not running "then it gives me the option to open the Service Control Manager to manually start the diagnostic policy Service.  This opens a window of Services with a huge list of things I don't understand.  I searched for solutions to the problem, and none have worked.  Any advice greatly appreciated.

    Hello, Lesley

    Thank you for using the Microsoft answers Forum!

    The following information is taken from: http://support.microsoft.com/kb/943996

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk!

    It is possible that the permissions on a specific registry key has changed. You can try to correct this by clicking on start, type regedit in the prompt, do a right click the program regedit and select run as administrator. In the registry editor, click the arrow to expand the selection, go to HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Services, DPS, on the right, click settings and click Permissions.  In the permissions screen, select the user TrustedInstaller . If you do not see the TrustedInstaller user, click Add, type NT TrustedInstaller service and press OK. If make sure that permissions full control and read are checked for the TrustedInstaller user.

    Let us know if that helps.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7: diagnostic policy Service does not

    Our internet does not connect to our PC, even when manually connected with the ethernet cable, but all our wireless devices such as iPhones and laptops to connect properly. We troubleshooted and showed a message saying "the diagnostic policy Service is not running, click to start as administrator." After clicking, we are shown that the error is that the diagnostic policy Service is not running (basically going in a circle), error 5. Everything else on the computer works fine, as far as we know.

    The night before it was passed, we found a little unbalanced PC Tower and we believe that our cat got on the computer table because the documents were scattered. It is possible that the Tower topple made something come loose which prevents the DPS of the race?

    Windows 7 Ultimate.
    Lenovo computer.

    We tried several system restores that have failed.

    I tried all these things and I ended up fix:

    go to start, search, type :-cmd, right-click on cmd.exe returned and select "run as Administrator" at the prompt, type: -.

    net localgroup administrators / add networkservice
    Press enter, and then type:
    net localgroup administrators / add localservice
    Press enter, and then type:
    output
    Press enter, and then restart your computer

    Open services and make sure that the service is started.

  • The diagnostic policy Service 2 error

    So, recently, my PC was off, due to the fact that little milk poured on him, (drops) this has my PC down, on a style screen Popes starting cmd and begins to browse my PC and deleted files, it was not a virus because I had anti virus running 24/7 and would like to notify me if there is , but aparently it deleted a dossier on the service strategy diagnosis and I do not know how to retrieve, iv tried to do a system recovery PC but it does not, iv tried to download a file .reg for her and it didn't work, so is there any other way for me to retrieve the file Diagnostic Policy service?

    Hello

    Thanks for the update.

    We can refer to the article below and check if that helps.

    https://social.technet.Microsoft.com/forums/IE/en-us/e76305bb-41dd-4baa-B2AE-52c7ec1a9586/diagnostic-policy-service-missing

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • Windows 7 64 bit - Diagnostic Policy Service won't start - error 5 access is denied

    Hello

    I am getting the Diagnostic Policy Service error 5 access denied. I can't start the service no matter what I do. I did all of the following without success and need urgent advice as gone through a lot of forums without success.

    (1) used the subinacl tool to reset my security clearance on all the registry files grant complete access to administrators and system without success

    (2) have started my pc using MSCONFIG in a configuration minimum diabling all non-microsoft services, and it did not solve my problem.

    (3) I tried to add/remove a feature of Windows like Windows Media Player and when the shuttdown system displays a msg saying that Windows could not configure your system so that the new setting, windows will revert to the previous state. and the media player is always on display.

    The fact that the Diagnostic Policy Service does not stop me using my Dial-up connection using a wireless modem using the PC card, it gives me Error 797 Port is not available. My dial-up show property of connection in the general tab, under connect using this says: device Unailable deleted (). So I have no internet on PC card, even if the device is detected by Windows and I see it as Iburst Terminal.

    I also have a problem, when I click on the phone and Modem in Control Panel, I get following error: phone and Modem Control Panel can not be opened. You can have a problem starting Telephony Service.

    I checked the Telephony Service it is configured to automatically and it is started. (I tried stop/Start) but doesn't solve is not my problem.

    Any help on this is much appreciated.

    Concerns

    JackDevVB

    Dear I.  Suuresh Kumar,

    Your silence to my post 2 has left me no choice to do a repair of Windows 7 upgrade. For the people who run the same problem, I found that it was the only alternative because none of Microsoft could give me an answer. I found a post that explains how to make a repair upgrade, which, for me, took place between 13:30 and completely finished and successuflly at 20:00.

    What it does, it re - install a clean version of Windows and keeps all your programs/settings/drivers/connections etc... intact. It was my solution. My system is now clean and without any problem. TKS at the following link.

    http://social.answers.Microsoft.com/forums/en-us/w7security/thread/8c812684-E790-43b9-BEEA-3a8759f2dc7f

    All this is thanks to Kevin technician from Microsoft technical support. Thank you very much Kevin

    Concerning

    JackDevVB

  • diagnostic policy service runs only on Windows 7 Home premium

    I can't connect to the internet via the wireless adapter. It says limited access to the wi - fi router. When I try to fix this he said diagnostic policy service does not. Checked services.msc while the set type in place for automatic failed to start the service. He throws error 1297.

    I had a similar problem with my connection to the local network. After resetting my connection to the local network, I was able to connect to the internet. Tried on wifi as well but the question remains.

    It is causing a lot of inconvenience. The need for a solution that won't require a reformat.

    Try this:

    Go to Device Manager.  UNINSTALL your network card (do not remove the drivers).  Reset.

    Reinstall Windows allows to the device, he, and I was running.

    I hope this helps!

  • Restart the diagnostic policy service

    logged in as administrator. try restarting the diagnostic policy service. Get the system 5 - access denied error

    Hello

    To restart the diagnostic policy Service click 'Start', type cmd , then right click on cmd and select "run as Administrator".

    After it opens type following commands

    net stop dps and press ENTER, and then type

    net start dps and press ENTER.

    Hope this helps,

  • manually start the diagnostic policy service 5 error: access denied

    Cannot start manually diagnostic policy receive error 5: access is denied.  I can not connect to wireless internet or start my firewall.

    Hi tankrum,

    The article below describes the problem faced by you. Click on the tool of automated troubleshooting described in the article below to solve the problem.

    Some services do not start in Windows Vista

    http://support.Microsoft.com/kb/943996

    The problem should be gone after running the troubleshooter.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 8 - unable to connect to the internet - the diagnostic policy service is not running

    Have new laptop acer with windows 8 installed - purchase - I could conntect to the internet.  I can no longer connect to the internet - I get the error msg - diagnostics policy service does not work - how to fix this? Thank you

    go to start, search, type :-cmd, right-click on cmd.exe returned and select "run as Administrator" at the prompt, type: -.

    net localgroup administrators / add networkservice
    Press enter, and then type:
    net localgroup administrators / add localservice
    Press enter, and then type:
    output
    Press enter, and then restart your computer

  • Diagnostic policy service will not run despite all methods found to fix

    As stated in the subject, I can't get my diagnostic to run, strategy service that prevents me to perform troubleshooting services and others. I started having problems earlier when my laptop stopped while he was starting because the wire had been disconnected and I didn't know it. I've done several things to get to where I can do everything well on, but I always get an error every now and then, and it's bugging me that I have something important works do not here. I am still able to connect to the internet since I did the whole NET add thing, but it does not solve my problem. I reinstalled the networking stuff and messed with the registry as well. I can't understand the problem at all and I was wondering if there is something that I missed somewhere in the forums. I am running windows 7 64 bit. Also I am not able to update windows and have many updates from Add. This is why I need this fixed number so I can run a convenience store for that matter. I'm also out of town for 4 days, but I can come back when I get back.

    Hello

    You can perform a clean boot to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts that occur when you install or run a software program. Click on this link and follow the steps for Windows 7.

    When you're already in the boot environment, we suggest that you download the Microsoft easy fix solution to solve the problem that prevents you to Windows Update. Click on this link to download it and run it, and then follow the instructions that appear on your screen.

    You can also use the System File Checker tool to repair missing or corrupted system files. Steps are described in this link.

    Let us know how it goes.

  • How do you re - start the diagnostic policy Service that is not running now?

    I can't update windows 7. I can't use my laptop wireless because it won't work if it is directly plugged into the router because of this problem and I can not access several programs. How can I get the Service of Diagnostics policy to start running again. Please, help us!

    I can't update windows 7. I can't use my laptop wireless because it won't work if it is directly plugged into the router because of this problem and I can not access several programs. How can I get the Service of Diagnostics policy to start running again. Please, help us!

    I finally found the answer to this and if you are looking for yet are simple, but you never know for making trouble.

    Start a command prompt, and then:
    Type:

    net localgroup administrators / add networkservice

    and then press ENTER.
    Then type:

    net localgroup administrators / add localservice

    and then press ENTER.
    Then type:

    output

    and then tap on enter, and then restart your computer.

    Open services and make sure that the service is started.

  • Error 5 in Services.I trying to start the Diagnostic Policy Service.

    Cannot start political diagnosis Service.ACCESS NIÉ window appears. I am trying to run Diagnos and Repair.I think I badly configured in the properties of the PERMISSION settings.

    Hi paulyalejo,

    The error means "access denied." This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Please follow the steps in the KB article below:

    http://support.Microsoft.com/kb/943996

    For the service 'Service of diagnosis political', the problem may occur when the Trustedinstaller account is missing permissions for the key below:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS\Parameters

    Is the necessary permission: full control, read. Follow the resolution given in the link above.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • Compaq presario SR1930NX: new installation

    Just did a fresh install of Windows xp, but still need drivers for. Video controller video controller (VGA compatible) I have no original compaq presario installation CD

  • I had problems with my Qosmio F10

    Dear friends, Let me share my problems with you and please help me with a solution for this.I have my qosmio F10 machine its over 1.5 years. It has been repaired 3 times since I bought it. 1 (6 months after I bought it), I had a problem with my machi

  • "Stop IMAQ" takes 10 sec to run and consumes 100% of CPU

    Hi, I'm calling IMAQ stop to put an end to an acquisition, but it consumes 100% of my CPU and takes 10 sec to complete (all your 100% CPU).  In our application, we have start and stop the device regularly, and that's exactly when the user wants the p

  • How do I enter usb storage away from home?

    I would like to access my usb storage away from home since Ios and android devices I googled and have not been able to find info. Thanks adavance.

  • BBM BBM of Blackbery 9320 to Android switching contacts

    Hello.. Recently changed my Android Samsung S5 device. I used BBM on the old device and had more than 100 contacts. When I downloaded and installed the BBM on the S5 I logged in with my ID EVEN BB, but I don't see contacts. I asked a friend to try to