Different screen rises than usual on the 'import '.

Similar Questions

• RMAN takes longer than usual to the database backup cars.

  Hi all

  I have a database of CARS 2 nodes (11.2.0.3) using ASM on OUL5x64 (DB1/DB2) the backup script was running on DB2 for the past 3 years without problem.

  backup with compress is 80 GB Sunday.

  level Inc 1 day = 20 to 30 GB)

  I just added 2 other nodes to this CAR, now there DB1, DB2, DB3, DB4

  moved the backup to DB4 script and set up all of the environments for this work.

  The first 2 days, it did increase normal level 1 backup around time (20-30 GB) between (1 h 30 min)

  but on Thursday which is always increase of LEVEL 1, it took 8 hours to do the job.  and when checking the size

  the backup, the size was 255 GB level 1 (s/n 20/30 GB) and today it did the same.

  Please give suggestions as why backup is so huge.

  Thank you.

  Here's the script.

  RMAN target / < < EOF

  echo setting

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT for DEVICE TYPE DISK TO ' / u02/%F';

  Run {}

  allocate channels d1 type disk maxpiecesize 5 g;

  allocate channels d2 type disk maxpiecesize 5 g;

  Compressed backupset backup

  format ' / d01/pr1/pr1_%s_%t_%p.dbf'

  extra strength 1 cumulative

  Skip inaccessible

  tag hot_db_bk_level1

  filesperset 4

  (data include current controlfile);

  # sql 'alter system archive log current';

  #Backup all archive logs

  Compressed backupset backup

  format ' / d01/pr1/pr0_%s_%t_%p.arc'

  Ark of the tag

  filesperset 4

  (archivelog all delete all entries).

  }

  Hi all

  After you resolve the problem, the support of Oracle pointed out that

  I hit the limit in this note:

  How many incremental backups can be taken when the OWA is enabled? ( Doc ID 452455.1 )

  the default value

  _bct_bitmaps_per_file = 8

  in my case, I ran more than 8 times in the week. sous-séquence then run don't use BTC (block_change_tracking)

  After running a backup full again, backup works like it suppose to.

  Thanks for the replies.

  Kind regards

• Different screen resolutions - what is the best method?

  Hello

  I know that this question was asked a thousand times before, but what is the best way and the most reliable to deal with different screen resolutions?

  I read a lot of posts about it and tested on everything: unique, methods, combinations, let labview scale my objects, their scale by myself, etc. Another alternative that I found was to design the front panel to the lower screen resolution, let labview scale objects (graphics, controls tab and decorations) as window increases or decreases and lock "groups of indicators, controls and text" to prevent them from scaling and overlap. However, if I lock these "groups" that they don't move in the right place in the resizing of the window. Then, I put these 'groups' within groups and tried to compensate for the position via the property node, but it was not possible because the 'groups' within the cluster have been locked!

  After all these tests, I realized that the best way to manage different screen resolutions must have a main VI that detects the current screen resolution and load the good VI for this resolution. The problem is that I have a VI for each screen resolution (created one by one) and if I want to move the code I have to do the same task for all the screws

  Since I already have all the screws (for different screen resolutions), I could get the sizes and positions of all the objects through property nodes and create a kind of 'cluster' which, after the detection of the current screen resolution, would be to adjust all the objects. But I have several decorations in the front panel and I can not get information via the node property of them.

  THW way you can prevent the control to move when you're scaling, is to group the controls with 'something' which is placed outside the façade. In the example I give you now, you can see that I have grouped the stop button and the 'red faces' with a 'point' on the left side of the front panel.

• XPS 15 much warmer than usual, running for the last week

  I have a XPS 15 laptop with SSD drive and plenty of RAM which usually remains cool. Last weekend he installed an update of Windows 10 (I think it was the version 1607). Since then the fan worked upstairs while the laptop is turned on and it feels warmer than usual. The CPU load can be less than 20% for an extended period, but the fan continues to run. I managed to go back to the previous version of Windows and it has not changed.

  The only thing that worked partly is to limit the maximum level of the CPU at 50% (I tried to use this setting on the battery and then unplugged the laptop). This cut the fan at a lower level, but I never had to do before. So far, the fan would rarely work at all.

  What is going on? Do we need updated drivers?

  It's very strange. I was watching the new to-do Manager trying to figure out why it's so hot when the CPU load is 20%. Upstairs, he said Intel Core... @ 2.2 GHz. On the right, it indicates the maximum speed: 2.2 GHz. On the left, he said speed: 2.9 GHz (sometimes going up to 2.8).

  If I put the State of maximum CPU at 99%, it falls down to 2,18 GHz, if I put it at 100% it goes back up to 2.9 GHz. I don't remember what he showed before it started, but this sounds very wrong. In both cases it is going above 2 GHz, even if the processor is not much used, but I guess it's ok if it is not overheating. It is already cooled down in a few minutes and I'm waiting to see if the fan breaks down.

  Apparently he did this during the last week and a half. What happens here? Dell release a updated driver overclocked my CPU?

• Equium A100-549: blue screen error during installation of the recovery CD

  Hey,.

  I recently bought a Toshiba laptop computer, everything worked perfectly until my laptop was attacked. I've got rid of the virus and went to reformat due to a lot of problems that occur. The main one being a mistake has cursed and 'Blah blah' program must be closed. As I continued to get loads of errors.

  http://aumha.org/win5/kbestop.htm
  The types.

  Now then reformatting disk Toshiba said just put the disk in the drive and turn off. I did very well. The said toshiba drive press F12 on startup and then click on run the CD. The CD starts and gets half way thro reformatting.

  Suddenly, I get a blue error screen. I thought oh well ill reboot and continue. This is where the problem started. Because I was half way thro removal/reinstallation of windows I was missing some files. I'll reinstall or try to use the Toshiba CD, I get a blue error screen.

  0 X 00000050: PAGE_FAULT_IN_NONPAGED_AREA
  (Click to consult the Online Win XP Resource Kit article, or see the Windows 2000 Professional, p. 1548 Resource Kit).
  The requested data were not in memory. An address of invalid system memory was referenced. Defective memory (including main memory, L2 RAM, RAM video cache memory) or incompatible software (including remote control and antivirus software) might cause this stop message, as may other hardware issues (for example, incorrect SCSI termination or imperfect PCI card).

  Any ideas what I can do? I don't want to return the Toshiba laptop to fix However im thinking this is the only way out.

  Please if repplying try to keep technical language to a minnium. Thank you, Dan.

  Hello

  It s very strange because the installation since the Toshiba Recovery CD should work properly and without any blue screen message.
  Usually, if the BSOD appears if there is a serious software problem or something wrong with the hardware.
  I don t think that the software on the CD of restoration could be corrupted.

  Have you tried to install the OS from the original CD of Microsoft Windows? It would be very interesting to know if the blue screen also.

  However, I think that your laptop is new and the warranty is valid. In my opinion, you should ask the after-sales Service of Toshiba partner to help him because guys could start the diagnostic test and can find the fault.

• Does anyone has knowledge with the import of bitmap images that display perfectly similar to full screen &amp; small

  I created a file of projection for a cd-rom. In the project file, we have added buttons to display full-screen or return to the screen 800 x 600. I imported our company logo which is only available as a bitmap. In the flash program, I put across the 1200 dpi at reduced size logo. However, I noticed that the logo is horrible when scaled to small. But you click on the button to enlarge to full screen, the logo looks great. Flash seems to understand that big logo real size will be read better in full screen, but cannot manage the bitmap well when you scale to a smaller size. So I did a test where I saved the logo in Photoshop at the small size. It looks very small, but when you expand to full screen, the logo appears blurry. In other words, I don't get the best of 2 worlds. Is it possible to have a bitmap image appear visually crisp at full screen or smallscreen? I tried to save at different resolutions such as 500 dpi, 400 dpi and 300 dpi. 300A almost what I want, but seem sweet when you cut them in full screen.

  Depends on a lot of things. Have you tried the 'use smoothing' option in the import of bitmap window? A logo is also still vector exactly due to similar reasons. If you can recreate it in a vector format you wouldn't have problems.

  Another way to take is to calculate for the highest resolution at which the flash runs (usually 1920 x 1200) (very few people have higher resolution screens, and even 1920 x 1200 is a rare case, 1680 x 900 - more likely) and adapted the logo in Photoshop to this resolution.

  This could also be a bug in the version of Flash you use. Another option is to have 2 images to 800 x 600 and full screen and change them accordingly with ACE (you can detect if the player goes to fullscreen or not with ACE)

  But the most likely reason is that you have a bug in your version of Flash... 1200 dpi also seems too gigantic to purposes not printing, maybe the reason why you encounter the bug.

  Emil Georgiev - Flash and Web design

• How to adjust the GUI on different screen resolution?

  Hi all

  I have an application that must be deployed on different stations with different screen resolutions. I want my application to be responsive, that it should be settled well in accordance with the resolution just like sensitive site. Is it possible to do?

  You have at least two simple ways to accomplish what you want: setting the resolution and dispatchers.

  The first automatically adjusts Panel when it is displayed on a screen with a different resolution than it was desigend on

  Dispatchersneed a little more effort: basically, they can be used to change the appearance of the window when they are moved interactively by the operator or by programming with OperateSplitter. You can decide what controls are suitable when a divider ir operated and if they are moved or resized.

  In the case of your example of the user interface, a horizontal separator could be used to resize the text box and move down buttons when the Panel is maximized.

  The choice between these alternatives is on hand: I personally do not feel good with the brutal scale operated when you use the resolution setting so I normall use dispatchers to adapt application windows to the size of the screen.

  You can see examples of the couplings in docking.prj and examples of splitter.prj located in the samples\userit folder. For an example of the first methos, the value attribute setting resolution 100, change the resolution of the screen and see what happens when you launch the program.

• My screen is darker than usual. How can I brighten it?

  My screen is darker than usual.  How can I brighten it.

  If you have a laptop/netbook computer, try your power settings.

  Click Start or press the Windows key and type power but do not hit . Click Power Optionss of the section of the Control Panel in the list above.

  

  You can adjust your screen brightness using the slider to the center of the window Power Options nottom. Closing the window will keep your new settings.

  It is also very likely that one of the keys on your keyboard (possbily in combination with the Fn key) will increase or decrease the brightness of your screen. See the documentation that came with the computer, the Google brand and the model of the computer with black screen number or it someone here may be able to help more supply.

• My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  Hello

  ·        You did it changes on your machine before this problem?

  ·        You have a LCD or TFT monitor?

  Usually in LCDs, there will be an option to set the button of the screen on the monitor resolution.

  You can also follow these links for the resolution of the monitor & check if it helps.

  Change the resolution of your monitor

  To change your screen resolution

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why some files are missing from the import screen?

  I'm trying to import some files in LR, but the import screen appears not all files that are in the folder I chose.

  I noticed that only when there are multiple files with the same base file name.  For example, when the file contains the following files, LR will display all of them in the form of import:

  • file. MP4
  • File1.jpg
  • File2.jpg
  • ...

  However, "file1.jpg" will not be shown in the import screen when the file contains the following files:

  • File1. MP4
  • File1.jpg
  • File2.jpg

  I was unable to find a LR preference that covers it.  Have I forgotten?

  Thank you!

  Here is a proposal... the emphasis on the word "guess"... When you have file1.mp4 and file1.jpg, .jpg is considered to be a "sidecar" and will not be imported... unless... you select the option in the preferences (general tab) that says: "Treat JPG files files next to raw as separate photos..." Yes, I know says "raw" option and your file is a 'mp4', but need you less than a minute to try ita

• Gel to the import screen?

  Hi all. Me once again. Currently, I am trying to import images and FCPX freezes on the import screen, then I have to force quit and open it again, only so he can freeze once more when I try to import images. The program itself seems to work fine, aside from that. I tried just by clicking and dragging the video files, but who doesn't, either. Any suggestions on how to fix, or alternative ways to import media? Again, thank you all for your help! You are great!

  You must give the tech specifications complete media you speak and your system.

• The scale of the objects in front panel for different screen sizes

  Hello

  Can someone help me Vi design for different screen sizes. I designed a VI to a small monitor and a lower resolution, but when I open the Vi even on another monitor, objects are not aligned correctly. The properties that I have changed are

  Appearance of window-> by default

  Size of the window-> screen size 0.0 & Tick marked options to keep proportions for monitors different and all the objects on the scale

  Position of the window Run Time-> Maximum

  Concerning

  Imran

  Yep, the minimum size of the value, and then drag the window to be the smallest size allowed, then turn off "allows the user to resize the window.

• My taskbar has moved to the right side of the screen rather than on the bottom. Is it possible to fix?

  My taskbar has moved to the right side of the screen rather than on the bottom. Is it possible to fix?

  1. right click on the taskbar and uncheck "lock the taskbar".

  2. move the mouse on the border of the taskbar until the mouse turns into black arrow; then stop, left-button-down and drag the taskbar whenever you want.

  3. then, you can lock the taskbar again.

• Unsuccessful login message - error message after "connection to the network is taking longer than usual"

  -All right, so I won't try to describe my problem by telling you what happens when I try to connect to any other network that my own home network (a school, work, network etc.).

  First of all, I try to connect and I get the message:

  "network connection takes more time than usual ' which of course is soon followed by the message"connection failed"after which said the logo of the network on the lower corner of the taskbar"

  this computer has limited or no connectivity"click to run a repair and three options including".

  automatically get new ip for the "wireless network connection" network card settings«»

  Reset the network adapter', and there is no internet here (I'm paraphrasing this one of course). "

  Now, sometimes if I click on one of the service options and the connection starts immediately, sometimes I have to click two options, one after the other fails to solve the problem, sometimes, I have to click on them each several times before it works (you one and two of another, for example).

  most of the time receiving the message ' windowstried a repair but a problem persists. " This computer has limited or no connectivity"between the stages of repair. I know that of not explore because I used mozilla firefox and google chrome and I get the same problem. I even tried to reboot once the connection has failed the first time. My computer is up to date and I have passwords for my school and respective secure networks of works.

  Y at - it as any indication of what could happen here for me to have to reset and click and wait and fix almost every time that I get on any network, but my home network?

  Thank you for your time,

  Bryan

  Hello

  Hello

  You scan the computer and make sure that it is clean of viruses and malware.

  Download the latest drivers for the wireless card from the support page for the manufacturer of the laptop computer and update the drivers for the card.

  After that.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  -----------------------

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  original title: Auto Adjust

  Hello.

  Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

  Any help would be appreciated... Thank you

  Try this:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner