Difficult to recognize the router my laptop wireless
Every time when I log on my laptop (Windows 7 Home Premium), the wireless router is not recognized. I have to go to Device Manager to uninstall the driver for the wireless adapter and then reinstall it through a scanning process. The wireless connection works for about 10 minutes and then disappears again.
I have to repeat the process of uninstalling the driver wireless adapter mentioned above to re-enable the connection.
At first, I suspect that the problem is caused by the material of the adapter. I have replace the chip. The problem remains the same.
Help, please.
Kind regards
Siu Kowng Lo
1) update your BIOS firmware, download from the laptop manufacturer's website
Download 2) and latest driver for chipset inatall
(3) install the latest driver for wireless network card to download from the website of the manufacturer of laptop
4)
Tags: Windows
Similar Questions
-
The wireless router from the time warner Server acer laptop says the signal is strong and is connected, but a sign comes up saying windows cannot recognize the certificate for the server? cannot go on using Explorer or mozilla lps.
Hi trickstar46,Follow these steps to resolve the problem:a. Click Start--> programs-->--> Communications accessories-click--> select--> right click on your connection network connections and select Properties.b. click on the Authentication tab--> disable / uncheck the authentication of the IEEE 802 option. 1 x for this network.c. click on apply. Click OK. -
Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.
Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work. I spoke with Cisco and they said that my Atheros AR5007 adapter does not work with Cisco E2000 and contact my computer vendor
Hello
HM... I guess that the Cisco people know what they're taking everything. The AR5005 is a b/g card and there should be a good reason to not work with a router that is able (the E2000 is able g) g.
This is HP drivers for the card, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-55737-1
If you can't make it work, you must decide between a new card or another router.
Personally, if it's new and I could return it, I'd get a different router model. But YMMV
------------
My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Question regarding the purchase of laptop wireless
Everything I've ever owned have been HP desktop computers. I need (well Yes, not desire) to buy a new laptop wireless. My intention to buy staples as I experience such great service in the past. Here are my questions:
1 at the present time, I have high speed internet, but not wireless. Can I have both wireless and material "no wireless" goes on the same connection?
2 will I be able to print on my existing (from my wireless laptop) printer if my desktop computer and printer are 'wired '?
3. when I get out of the store, what do I need in my hands? I live 50 miles away and don't want to go home and find out that I'm missing something.
I teach online classes will therefore could go 'on-line' no matter where I'm travelling. I guess my wireless connection works in the House of my daughter in Arizona as far as I know their password? As I have not worked with wireless, I am a little confused how it will work.
I'd appreciate recommendations on routers and laptop computers, if you have a preference. I'll use camtasia in my class so will need microphone and camera possible.
In advance thanks.
Padraig
1. Yes. This is called a hybrid network. With a wireless router that comes with LAN ports (4) which is easy to do. I use a Netgear WNR834B 802.11n router that has a LAN port. Easy to set up.
(2) you will need to set up a simple home network and share the printer on the network from thePC to which it is connected. You can also install a print server connected to your network and it will have its own network address and be available for all the PCs on your network.
(3) you need a wireless router (my preference is Netgear 802.11n because of the reliability, range and throughput of 300 kbs).
I have exxplained the answers to your questions only in simple terms. I have no idea what your level of knowledge is in terms of networking (i.e. the subnets)
My home network is a cable modem which is connected to netgear powerline devices (2)
(via a CAT5 cable) which uses the wiring domestic (115 v) to provide an internet connection to my wireless router that offers a wireless for my laptop and a second office. My server at home and the box of FreeNAS are connected to the network via the router's LAN ports using a CAT5 cable
.
-
M40X connects to the router Netgear DG834G wireless
Message on the toolbar and warnings are; No limited connectivity or. Improved Intel Pro wireless 2200BG driver worm 9.0.4.8 without success.
I have another laptop with a USB wireless network too and that works very well.
I was able to connect to the router via the ethernet card.
Been on Netgear, and the router works well.
Any ideas, anyone please...Hello
I guess that your laptop uses the map Intel 2200BG wireless.
You will find a lot of questions and problems with this card intel.
Mainly the graphics driver update will solve these issues.
You can also check the power save mode settings in the properties of the wireless card. Go to the Device Manager, choose the wireless card and go to properties. In the second Advanced tab you should find the Power save mode option. Please switch off (off)I put t know where you download the driver, but you must use the latest version on the Intel site.
-
Cannot access Internet even if the router USB adapter Wireless G made the connection and
Hello, I recently bought a Wireless-G USB Network Adapter with SpeedBooster model WUSB54GSC to go with my Wireless-G Broadband Router model WRT54G2 and I can't access the internet. The laptop tells me I am connected and that force is Excellent, but when I open my browser, I can't access any site at all. When I try to add the laptop to my network magic on my computer, it tells me that it cannot connect with the laptop. My Nintendo Wii and Itouch work perfectly with the router so I think it's my browser settings, but I can't understand it. Thank you!
Hey, thanks for trying to help out. It turns out that my firewall did not allow the laptop to access the internet. I made a few adjustments on my firewall settings and it all worked out great.
-
MG6220 printer must be physically connected to the router to operate wireless?
Is the need for printer wireless MG6220 be physlically connected to a router to access wireless?
No, it is connected via radio according to the installation instructions. The only thread on the MG6220 printer's power cord.
Installing from the DVD has also updated all programs of Canon and recorded my new printer. I answered my own question.
-
Re-establish the connection to the router from Verizon Wireless
I use IE6 on a portable Toshiiba with Windows XP. Our internet connection is via a Verizon Wireless router. Today, I can't run (Firefox or IE, by the way) - it does not detect the router. I am still able to connect to this router and internet through my MacBook Pro. How do I reconnect?
Thank you.
Hello
1. What is the model of the router?
2. you get any error message?
3. don't you make changes to the computer before the show?
Please follow the steps below.
Method 1:
Follow the steps from the link below.
http://support.Microsoft.com/kb/870702
Method 2:
Follow the steps from the link below.
Method 3:
Follow the steps from the links below.
See also the below mentioned link.
http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
-
The router access point wireless bridge
Hi I recently moved into a new building which has a few hot spots for the Internet connection is included in the rental price. I don't have a model of linksys Cisco wireless-G broadband router. WRT54G2 V1 and I am trying to create a wireless bridge between the point of interest (I have my own Unique Internet identifier) the router, which is then connected to my office using an Ethernet cable.
Can I create a wireless bridge, if yes, how can I do this?
Thanks in advance
The router (WRT54G2 V1) does not have a capacity of wireless receiver so you will need a separate ethernet bridge.
Your installation should be like this:
(((WiFi)))---> (((pont Ethernet<-wired connection-="">routeur Linksys<-wired connection-="">ordinateur de bureau))I hope that makes sense. XD
-wired>-wired> -
Intel noted some problems with the Intel(r) Active Management Technology-SOL, but also their Intel (R) Management Engine Interface. I checked with the help pages to download Lenovo and downloaded what I could but still an unable to establish a wireless connection. T400 Thinkpad Lenovo. Thank you guys
Hello
It seems that there is a known problem with Wi - Fi in T440 ThinkPads. Follow the steps in the article mentioned below and check if this solves the problem.
Troubleshooting Wireless - ThinkPad problems
http://www-307.IBM.com/PC/support/site.WSS/MIGR-50402.htmlIf the problem persists, then contactLenovo's Support for assistance.
Kind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers Feedback Forum and tell us what you think. -
Toshiba 40L3453DB does not recognize the hard drive Seagate Wireless Plus
Hello
I recently bought a hard drive Seagate Wireless Plus. When I connect the hard drive to my computer, it recognizes it's ok and I downloaded movies, music, etc. on him. However when I connect said HDD on my TV and select the media browser, it comes up with the message "no removable disk is connected.
I looked online but I could not find an answer for my problem, but I noticed a lot of people talking about the format of the hard drive. The hard drive is underway in the Windows NT file system format.
Any help is greatly appreciated.
Gary
HelloI recently bought a hard drive Seagate Wireless Plus. When I connect the hard drive to my computer, it recognizes it's ok and I downloaded movies, music, etc. on him. However when I connect said HDD on my TV and select the media browser, it comes up with the message "no removable disk is connected.
I looked online but I could not find an answer for my problem, but I noticed a lot of people talking about the format of the hard drive. The hard drive is underway in the Windows NT file system format.
Any help is greatly appreciated.
Gary
There are known limitations when connecting TVs USB hard drives:
-HDD format is one of them: FAT/FAT32 should work, NFTS (depending on model) probably not
-in the manual for this model, only the USB keys are hard disks mentioned, none (which require an external power supply).
USB drives are USB - bus-powered and therefore does not usually cause trouble, while external power supply used by hard drives can lead to problems, this device is not recognized.In short: there is not that you can do, in addition to changing the USB device. You can try with the FAT32 format first, but with some probability that also won't work, except for the fact that FAT32 is supported only up to a certain size of drive.
-
13 - c050sa: I accidently deleted the driver my laptop wireless. Help
I recently had to uninstall a bunch of one of my brothers laptop computer progrannes. But accidentally deleted something and now I can't connect to wifi. Help please
Realtek
http://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73310.exe
http://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73250.exe
Broadcom
http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71994.exe
http://ftp.HP.com/pub/SoftPaq/sp73501-74000/sp73899.exe
REO
-
Equium L10: How to configure the wireless card to pick up the router?
Am wireless news and putting in place Broadband BT BT Voyager2091 router. Laptop wireless button in 'on', but is unable to connect or view available wireless networks. How to set up the portable integrated wireless card to pick up the router?
Hello
First of all, I hope that your camera comes with the wireless network card and the wireless network adapter is listed in the device under network adapters Manager.
The card must be activated first with wireless switch that you can find on the front of your laptop near the lights on the system (right). When the adapter is enabled using FN F8 key combination to activate the card. When you use the FN keys in the middle of the screen, you will see a small window. When the FN button pressed constantly, whenever using the F8 key the different symbol will be chosen.
Go to START > Control Panel > network connections. Click with the right button on wireless network connection and choose Properties. Chose the WIRELESS NETWORKS, tab and activate the option called use Windows to set up?
At this point the available networks are listed. Select view wireless networks. If your WLAN is listed here you must configure the connection if the password is set.
Try it!
-
Unable to connect via the wireless router "problem with wireless adapter or access point" _
Hello
I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.
The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.
I had help from my internet service provider, the installation correctly the problem not because of the connection.
I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.
OK, you're my next hope to solve the problem can you HELP Please!
Hi, JoelbX
I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
All the best
Tring -
Encryption advice please WRT160N router/gateway/modem wireless
I would like clarification on security and encryption please.
I have a WRT160N router/gateway/modem wireless with WPA security is enabled. I have a wired office with LELA installed and a wireless laptop. A key is required when connecting the laptop but on page properties in LELA, it says "wireless encryption - no ' is this extra encryption in addition to the security theWPA. WH n I try to enable it, LELA asks the password admin but after entering that does nothing (except once again ask!) What I am doing wrong?
Thank you
That your network is already reached, but him dosent software LELA display you something on your safety. This means that the LELA was not able to properly synchronize with the router and its wireless settings. So in this case, you do not have to worry about this, if you want you can uninstall and reinstall the LELA software on your computer, that might solve the problem. Or of another Complitely uninstall LELA software from your computer.
Maybe you are looking for
-
I can't ' save target under "using the right click! Any suggestions please.
I need to record images or mp3s from a web page but cannot see 'save target as' right click function. Help, please.
-
Incomplete, ripping CD s for iMac/iTunes
I have found 100 + purchased on CD not included in my library. In the past when try to rip to iTunes info relating to the title, artist and title of the song automatically transferred. There is a new Apple desk top (OS X El Capitan 10.11.3 version)
-
Latest news on microsoft surface (samsung)
* - Original title - when is microsoft surfaceeee (samsung)? When is microsoft surfaceeee (samsung)?
-
The ultimate way to optimize SQL statements?
Hi allI hope that this discovery you in a good moodI have a few SQL I need to optimize.In your experience what is the best way to find all the bottlenecks 'True' in the SQL itself.It's my workflow:Step 1:Explain the plain: find all the analyses of fu
-
Sticky notes appearing as an icon only. Non-visible text
I have Acrobat DC 2015.016.20041 and all comments have become not selectable and do not display the text. If I insert a new note of sticky notes, it shows the details but all the 'old' is not visible.Post-it notes top note is the new, but others do n