Difficulty accessing speed N Wireless with AP1141N

Similar Questions

• Problem with access point or wireless adapter

  Hello world

  tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
  The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

  Is there any online support?

  Hi smert

  Your message is not really useful.
  Why? Because no one knows all the details of the laptop, wireless network card system...
  So please would you be kind enough to provide more details.

  But despite the missing information, I recommend:
  (1) reset your router WLan
  (2) check the connection to the WiFi unsecured. (of course for testing purposes)
  (3) check the different (WPA/WPA2 AES, TKIP) encryption

• Cannot access wireless with linksys WRT54GS router

  Hello

  I just installed a Linksys WRT54GS router on my connection, the problem I have is to be able to access with my wireless on my laptop.

  I kept getting a message saying 'connection unindentified' 'access '. I did most of what is already on your forum that such a power out of my rooter, my modem and such and still nothing. I am able to access wireless with my girlfriend Mac laptop, my playstation 3 and my desktop computer which uses Windows X. I initially thought that it my be a problem with my security but even when the connection is unprotected I still have this error. I am trying to disable the IpV6but that didn't ' dot something or the other.

  My laptop is a Toshiba Qosmio X 300 PQX32C-033019 with Vista and my router is a Linksys WRT54GS to. 6

  Here is my connection connect you, sorry if this is in French:

  Try this-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  On your Vista laptop, first turn off the wireless network connection and restart the laptop, and then enable the wireless connection...

  Then click Start > Control Panel > Network and Sharing Center > manage wireless network and click Add, select manually create a network profile and click Next, enter the name of your network SSID/network, select WEP for security type and enter your 10-digit network key and click Next, it should say 'Connected successfully to _' close all windows , and then restart the laptop, now see if you can connect to the Internet wireless...

• Can I access on my iMac with MacBook cd drive

  Can I access on my iMac with MacBook cd drive

  You can if share you it on the network.   But you need to enable the sharing of files on the CD while it is inserted in the Mac by reading the information in the file menu, select it in the Finder.      Unfortunately the MacBook not having Firewire or love at first sight, you cannot use Disk Mode target using the player.

  It can be slow, is it a USB - C ethernet card or WiFi.    If you want to make sure you get the highest possible speed a USB optical drive should work fine.  http://www.MacSales.com/ made a few that actually work very well with Macs.

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• Local access only on wireless network

  My laptop (Toshiba Satellite L350-203 with Vista SP1 HPE) has lost the ability to connect to the internet using my home network. I have McAfee Internet Security and charge of IE8, but both were present before the problem appeared. My home network is now displayed as 'unidentified public network' and the laptop has "local access only". He seems unable to keep the WEP key for the network as it asks everytime I try to connect. I confirmed that the WEP key is correct. There are 3 other computers in the House that connect without a problem, so I guess that the router is not the source of the anomaly. I tried accessing another network to another place (with any necessary safety information) but get the same result, so that other computers can connect successfully. I am able to access the internet via an account mobile broadband (using a "dongle"), but I added this account after the problem appeared, so once I don't suspect it as being the culprit. Diagnosis in the "network and sharing Center" routines are unable to solve the problem, so any help is most welcome.

  Roy Mac

  Hello Roy Mac,

  Thank you for using the Microsoft Windows Vista Forums.

  You receive an error or the error codes when you try to connect?  You're obviously network savy upward so if something seems repetitive please ignore, you tried to delete the location and replace?   Is there any software for the high account mobile broadband that could changed settings?  Are you able to connect to the router with an ethernet cable access to the internet without problem?

  A wireless network uses authentication and encryption to help stay secure. Authentication controls access to the wireless network. Encryption helps to ensure that malicious users cannot determine the contents of wireless data frames.  Windows Vista includes a new wireless network configuration setting. The new setting indicates whether a wireless network is broadcast or not broadcast. You can also use the new configuration setting that a Windows Vista wireless client connects to a non-broadcast network.

  I've added two links below one for Microsoft and one for the installation of networks and networks the Toshiba site.  Please let us know status.   Thank you!

  The software that you used with Windows XP to connect to wireless networks is not compatible with Windows Vista. Alternatively, you can use Windows Vista to configure wireless networks.

  To connect to a wireless network in Windows Vista, follow these steps:

  1. click on Start

  Collapse this includes this image

  , then click on connection to.

  2. click on the wireless network you want to connect, and then click connect.

  Note During the connection process, you may be prompted for a key WEP Wired Equivalent Privacy (). If you do not have this key, contact the network administrator to help wireless.

  For more information about connecting to wireless using Windows Vista, see the Microsoft Web site at the following address:

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

  How to connect to a wireless network in Windows Vista
  http://support.Microsoft.com/kb/928429/en-us

  Toshiba.support:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=wireless+connection+Vista

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot associate my Xperia Z3 wireless with my Win7 32-bit computer

  Hello and thanks for reading,

  PC 32-bit Win7

  Sony Xperia Z3 (in Media Transfer Mode)

  I follow the installed "to you ready to use your device wirelessly with a computer" but do not get the necessary popup and therefore cannot click on "configure device for network access" to allow me to pair my PC with my Xperia Z3 phone so that I can use my phone with my PC wireless.

  The Z3 Xperia phone and PC Win7 have more recent software updates installed.

  I would appreciate help with this device matching business. It's all new to me and Google search has developed with nothing!

  Thank you

  johndoc

  There is an easier way - connect your phone via USB and open Computer - when the device indicates that connected then click here right and on the left, click on the network configuration and follow the steps - much easier than via Pc Companion

• How can I block others access to my wireless router?

  I have performance slow and even lose connections.  I have Comcast and they have suggested that it is 'noisy' of what they see on their end.  The technology said that he receives many complaints from users of wireless router.

  Hello

  Quote: "How can I block others access to my wireless router?

  By setting up the wireless router security encryption.

  Of the weaker for wireless security, more strong capacity is.

  No security
  Switch Off SSID (even has No Security. SSID can be sniffed easily even if it is turned off)
  MAC Filtering___ (Band Aid if nothing else is available, MAC number can be easily Spoofed).
  WEP64___ (Easy, "Break" by knowledgeable people).
  WEP128___ (a little more difficult to activate, but "Piraté" too).

  -------------------
  The three above are not considered safe.
  Safe starts here at WPA.
  -------------------

  WPA-PSK__(Very Hard to Break).

  WPA-AES__(Not functionally Breakable)

  WPA2___ (not functionally breakable).

  Note 1: WPA - AES the current interpretation level entry of WPA2.

  Note 2: If you use WinXP SP3 bellows and not updated, you need to download
  the WPA2 Microsoft's fix.

  Documentation of your devices (router wireless and computer wireless card) must indicate the type of security that is available with your wireless hardware.

  All devices MUST be set to the same level of security using the same password.
  Therefore, security must be set according to what is the best possible one of the wireless devices.

  I.e. even if most of your system may be able to be configured to the maximum with WPA2, but a device is able to be configured for maximum of the WEP Protocol, to the whole system must be configured to WEP.

  If you need more security and a device (such as a wireless card that can only do WEP) is now better security for the entire network, replace with a better device.

• Laptop wireless with NETGEAR router Home Windows Vista detects on the local network and internet

  We have a laptop Toshiba Satellite L505-S6946 with Windows Vista on it. We bought a router Netgear Wireless G WGR614V10 a few months ago and installed ok. It worked fine for a few months. Now the network connection to the bottom rhs shows tray icon: 'Local only' for the connection of the SSID, we have implemented. Technical support Netgear has determined that the router works fine. But they noted that the router might get a static IP address in his settings of the adapter wireless Vista. And they said that something should be changed in Vista to a direct connection with the modem works fine for internet access, but it's bulky. Someone please do you suggest to fix this error? Thank you!!!

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• After that Windows 7 conclusion "No Internet access" in the wireless network?

  I have a USB wireless network card installed in my office. All judging by the "connected network" showed, that he manages to connect to my wireless router, with I can't visit all websites due to "free Internet access". Only if I move my router where (almost) no wall blocking the path between my office and the router, will be solved the problem.

  There is no problems surfing the Internet using my laptop (Windows XP) and the iPad, which also connect to the router.

  I don't know what "No Internet access" while "Connected network" appears. To understand this, perhaps I should know what Windows 7 draws the conclusion "No Internet access" to the wireless network.

  Thank you, everyone. I managed to figure out the problem last night. With this document that I found by Googling, http://www.usb.org/developers/whitepapers/327216.pdf, I tried to disconnect my DVD ROM USB plugged next to my wireless network card and found that this really WORKED, although the DVD ROM is USB 2.0 instead of 3.0.

  In addition, as Shawn "Cmdr" Keene [MVP] said, I really need to I ignore the message "connected network". I ran the Ipconfig/all command frequently and found that sometimes the IP address of my wireless network card was no longer * 192.168.0 and the gateway, and the IP addresses of the DNS servers are null, even if the message "Connected network" remained all the time.

  Hope this helps others who also have this problem, even though my English is not very good. : )

• Control access to the network with ACS device

  Hi all!

  I currently have in place an Appliance, Cisco Secure ACS using Windows as main server authentication. Cisco Secure acts as a GANYMEDE server +. I have two groups defined in Cisco Secure: Netadmins and security ITD. Users of the Netadmins group need access to all switches and routers on the network. ITD security must only access async line 53 on a router 2611 for a band of a firewall and no other access to all network devices offline. How can I limit access to the Cisco Secure security ITD group to line 53 only?

  My current config on this router is:

  AAA new-model

  AAA authentication login netadmins group Ganymede + line

  connection ITDSEC authentication group Ganymede + line of AAA.

  RADIUS-server host 10.30.X.X

  RADIUS-server host 10.18.X.X

  key radius-server XXXXXXX

  line 53

  No exec

  authentication of the connection ITDSEC

  transport of entry all

  StopBits 1

  Speed 115200

  line vty 0 4

  exec-timeout 30 0

  login timeout 120 response

  login authentication netadmins

  but users in the ITD security can still access by vty and then reverse telnet to any asynchronous line on the router. In addition, security ITD always access any switch or router using telnet: what should be my setup on these devices? I do an ACS configuration?

  All other devices:

  AAA new-model

  AAA authentication login netadmins group Ganymede + line

  RADIUS-server host 10.30.X.X

  RADIUS-server host 10.18.X.X

  key radius-server XXXXXXX

  Line con 0

  password 7 141C015C5806

  login authentication netadmins

  line vty 0 4

  password 7 11020A 524310

  login authentication netadmins

  line vty 5 15

  password 7 11020A 524310

  login authentication netadmins

  Any help will be greatly appreciated.

  Hello

  In the security group, I would create a Restriction of access to IP network with an entry permit. Essentially to allow access to the single port on 2611 only.

  The AAA Client field is the name that you gave to the 2611 in the network config. Address will be * unless you want to restrict access to the ip or address. Port... never quite sure with async if the port value must be "async 53" or "line 53".

  If you look in the pass/fail for the nas-port attribute, you'll see what that T + sends to the ACS. This should help you know what to put in the NAR.

  Mounira

• My wired network cannot access computers connected wirelessly

  Very strange problem of networking:

  Everything is Windows 7 and the network is defined as a working network.

  My laptop (wireless) can see and access my desktop (wired), but my desktop computer, although it can see my laptop, cannot access.
  If I connect the laptop cable, the Office can then access. I do not change anything, just plug in the cable.

  If also connected to my netbook with unusual results. The netbook runs Windows 7 starter and is wireless
  He can see the desktop and the laptop and access, but does not appear in its own computer network list in the Explorer.
  It is visible in the desktop browser, but are not accessible from it. It does not appear on the Explorer of the laptop at all.
  If I have the cables up to the netbook, the Office can then access it, but the netbook can then access the laptop if it is wireless.

  Just to clarify - netbook on wireless - I can access the laptop (wireless or wired)
  NetBook on cable (wireless or disable as well) I can still see the laptop, but cannot access it.

  When I first put this network - a couple of years - all spoken at all. I think I lost it after an upgrade of windows, but don't know when because I rarely access the laptop from the desktop, usually the opposite.
  Anyone got clues? Or how can I delete all networks and start again because I have a different network (same working group) on each PC name, but I can't change the names - windows seems to decide what to call them.

  Hello

  Thanks for the reply.

  I would appreciate if you can help me with the following information.

  1. what happens when you try to access wireless computers? You receive an error message/code?

  2. don't you try to access folders to disable firewall/antivirus?

• Error message 'Please select the access point or wireless router to set up' when you set up a network

  Original title: set up a network.

  I want to create a wireless network for the games, and when I click on the network. A screen comes written on this "Choose the access point or wireless router to set up" and that "it might take 90 s for devices reconfigured to appear on your computer.

  But no device never appears below it, even after 90 minutes.
  Please help me with this.
  It was so easy in windows 7.

  Hi Manas,

  What is the brand and model of the Wireless Router/Access Point?

  Given that the issue has not persisted in Windows 7, there is a chance that the wireless router/Access Point is not compatible with Windows 8.

  Please check the links below on the implementation of a network.

  http://Windows.Microsoft.com/en-in/Windows-8/Setup-home-network

  http://Windows.Microsoft.com/en-in/Windows-8/what-you-need-Setup-home-network

  http://Windows.Microsoft.com/en-in/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  http://Windows.Microsoft.com/en-in/Windows-8/Add-device-or-PC-to-network

  Answer please if you have any questions.

• I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

• iPhone 6s doesn't sync wirelessly with iTunes

  I have a new iPhone running OS 9.2.1 6s.

  Is set upward wireless at the Apple store, restored from my previous iPhone 5 and me kept updated iOS and phone saved wireless, and had not annexed it with iTunes on my Mac, until today.

  I have the gasket with the USB cable into my iMac running the last El Capitan, iTunes 12.3.2

  The iPhone has shown in the section "My devices" in iTunes, but I immediately got a message "there is a new version of iOS for the iPhone (9.2.1). iTunes started download iOS 9.2.1 but I stopped, because the phone has already 9.2.1.

  I checked the preferences to allow the iPhone to sync wirelessly with iTunes, applied and then ejected from the iPhone.

  My iPhone is connected to wifi, but when I restarted iTunes it does not connect wireless - the wireless only showing in iTunes is my iPad.

  My questions are so

  (1) why only iTunes can only see my iPhone 6 is already running the latest version of the iOS software

  and

  (2) why didn't it connects wireless when I set the preference to do?

  Thought I'd ask advice here before that I contacted Apple support.

  Thank you

  Caroline

  There is a different verson of 9.2.1 released by Apple to fix the error 'January 1, 1970.  It is only available through iTunes, not live.