Difficulty after with 10.0.6.545 update

Similar Questions

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• Restrictions does not not after ISO put 10.0.1 update with the new iPhone 7

  Restrictions does not after ISO put 10.0.1 update with the new iPhone 7 any which option of ranking app I don't choose no changes are made.  All the patches?

  Thank you

  Hello Launcher,

  Thank you for bringing your question about Restrictions here in Apple Support communities. My understanding of your question is that you change the Restrictions, but no change is noticed. I tried the same on my iPhone 6 Plus running iOS 10 and noticed a similar situation. Please allow me the opportunity to explain how the Restrictions is designed to work. First, I put my limitations for applications, do not allow Apps and together 4 +, which basically means everything beyond 4 + will be blocked from buying. Then I went to the App Store and the first app that caught my attention was NCIS: hidden crimes. This app is rated 12 + and is definitely an application I would not want my toddler to help. It is that Restrictions come into play. When I type on NCIS: hidden Crimes, the Get option is grayed out. Restrictions does remove all apps, songs, books, etc. from view, but it will prevent the purchase, download, and install all applications rated above the setting you choose when you set up restrictions. It's the help article that discusses the Restrictions and prevent purchases: Use Restrictions in order to avoid buying on iPhone, iPad, or iPod touch.

  I checked on the restrictions help articles, and I understand where it can be a bit confusing. In the help article Use Restrictions on iPhone, iPad and iPod touch, it says "You can use Restrictions, also known as parental control, to block or limit specific applications and features on your iPhone, iPad or iPod touch." This means in fact that apps, features or services (rated above that helped you, or if you have turned off completely) can he no longer appears on the device if the restriction is activated and starts blocking them. I also tested this by activating Restrictions and turned the cursor for Safari to off. When I went back to the home screen, Safari doesn't show any more and I could no longer use it.

  I hope this helps to clarify how the Restrictions. If my understanding of the issue was not accurate to the issue that you are experiencing, I will be happy to pursue this issue with you. Please indicate exactly what you took measures, and what expectations you had or the some restrictions, applications, features, or services you are restricted. Thanks again and have a great rest of your day!

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• Code 80070005. After carefully installing Windows 7, Windows update tells me that I must install a critical update that keeps failing

  After carefully installing Windows 7, Windows update tells me that I must install a critical update for the graphics card to Nvidia 9600 m GS on my Touchsmart, but every time I start the process, the download fails with the error code 80070005. I tried several times a day for a week now. Media Center won't play any TV, saying that the correct graphics drivers are not installed. I tried to install the drivers from the Nvidia site, but nothing helped.

  Hi Jos Kelly,

  Try this link, it might be useful:

  http://www.nvidia.com/object/win7_winvista_32bit_191.07_whql.html

  Good luck, let us know if it works.

  Stephen Davies MS

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• any ideas? Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581). That's what I get away

  Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581).

  
  

  any ideas?

  Suggestion: Try to do a repair of Office 2007 installation, then try the updates (after a reboot).

  How to install and repair 2007 Office features
  http://support.Microsoft.com/kb/924611 TaurArian [MVP] 2005-2010 - Update Services

• It's a complete hard drive after reinstalling XP Home and all updates are done, why?

  Do a XP Home reinstall on a desktop HP clocked at 1.6 ghz with 1 GB of ram and a 10 GB hard drive (about 9.8 GB usable after format). Booted from the disc, has made a full format of the hard drive, responsible for XP home without any problems, registered with Microsoft online, loaded all updates including SP3. Now, the system shows only about 170 MB of hard disk space. Is it possible that XP Home with updates can use much more space or can I have another problem? I thought that she should only use about 1.5 GB?

  I could indeed take up that much space. But, you have a more serious problem. Your drive is too small... you have lucky, Windows is still stable. Where to install your programs?

• After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized.

  After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized. In addition, all pages that I opened on the internet are coming with the same blocks of old, gray. Any ideas on what was past, and how to fix it?

  Original title: old start bar

  Right-click on your desktop, go to customize and then make sure that any theme in the 'Aero' section is currently selected.

• After that 2015,4 Clips of update offline will be no reissue

  My first post with an important issue. I am a producer/editor who was on the CC 2015 for a short period and published a number of episodes on the system with small problems until the update of June and now the 2015.4 update. I am not the most technical or computer savy, but did very well provide 14 half-hour episodes on Fox Sports West but I need help with this problem and I'm not proud and seem to take about 1/2 information on the positions of the community... so go slow and carefully explain to that old fart!

  I have AVCHD MTS files in 1920 by 1080 p and Go Pro MP4 clips all went offline and are not rebind. Here is the error I get when trying to recreate a link:

  

  I spent almost three days just organize and re-labeling more 2 000 clips are getting ready to start editing. I still have clips to categorize and put in folders. After the set 2015.4 to update all the re-labeling I did are offline. Some of the clips that I don't have a new wording seem to have been affected by the update and other clips not labeled are offline... weird. I hadn't started to edit all sequences so I thought I'd be sure to make the update... YIKES!

  I deleted the Cache of media under Edit/Preferences/Media and clicked on 'clean' and it seemed to do it's thing but it does not change the issue. I received the same error message as above. In addition, I tried to import the same go Pro MP4 files offline and I get an error "unsupported format or damage file message."  When I try to recreate a link to or re-import my MTS files I get an error, "the importer reported a generic error." I can't afford to start over and lose all this time and it seems not that I could even to reimport the files at this point.

  I have not tried to rename the folder with all the clips and try a repeat... What do I do and is there any workaround? How is it that this does not show up in tests of Adobe before they released the update today?

  I've never been so frustrated and it has really questioned my spiritual maturity but I wear pretty thin and I'm ready to blow up a gas git! Thank you for your kind reply. It seems very difficult to get to Adobe directly, so I really appreciate this forum and any suggestions you may have.

  Here are my system specs

  

  Let me know if you need other information system, in other words, if I can figure out where it is. Almost forgot, I've upgraded to Windows 10 a week before the update today but everything worked very well. Thanks again for your suggestions.

  Here's how get back you to 2015.3.  Everything works again for me.

  FAQ: How can I reinstall the first Pro CC 2015.2 (9.2)?

• How Do I Update my emotions after verse Version 12.2 (the update is not applicable, it says what I tried)

  So I'm working with this model after the key, and the model has been done on after affects version 12.2 so I need after key 12.2 in order to finish it and I tried an update that I found but then I just get this.

  

  Help, please.

  This is your problem, then.

  12.2 update is update version 12.x (12.0, 12.1 or 12.0.1) to version 12.2.

  The most recent update for version 11.x is 11.0.4:

  After Effects CS6 (11.0.4) updated

  If you want version 12, then you need a creative cloud subscription, and you can download after effects CC (12) using the creative cloud desktop application:

  http://creative.Adobe.com/apps

  Even better, you could use the latest after effects CC 2014 (13.0), which is available in the same way.

• Windows will not come after the installation of the security updates

  I called my manufacturer and they said that my Sony VAIO computer is a version of OEM Windows XP on it and that it would not recognize a retail version of XP.  Is there a way to remove the KB977165 in this situation?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I stop my new laptop with Windows 7, install new updates. But now my laptop won't charge. There only dark blue screen. He won't even have to sign on the screen. Someone at - it happen?

  I stop my new laptop with Windows 7, install new updates.  But now my laptop won't charge.  There only dark blue screen.  He won't even have to sign on the screen.  Someone at - it happen?

  Hi ctgreen

  Welcome to the Microsoft Answers site!

  You can try the following and link methods under each method for more information on the same and see if one of them solve the problem.

  Method 1: Start the computer in last good known Configuration

   

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the button start , click the arrow next to the button lock , then click on restart.

  1. Do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

  1. In the Advanced Boot Options screen, use the arrow keys to select last good known Configuration and press ENTER.
  2. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: Start your computer in Mode safe

   

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click on the Start button , click the arrow next to the lock button , and then click restart.

  2. do one of the following:

  o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode and press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you'll see the words Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to access the desktop in SafeMode I suggest you read the article in the link below for instructions on restoring the system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• After you have installed the free updates for Vista Home Premium 64 bit, Windows will not start

  After that I installed the free updates to service pack 1, the system goes through 2 of the 3 steps, while it recharges, then the system does not boot?  To get the computer to work again, I need to run the repairer of Windows, which allows you to restore the system to an earlier point?  Does anyone have an idea how to fix this?

  Do your system restore, then:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Update has encountered an error and cannot display the requested page after that I click on express update.

  Original title: page Web update always comes back also cannot display the Web page after that I click on express update.

  Page Web I cannot update. Obviolsy I have access to the internet. I tried this several times. I have reintalled windows and I need update Inorder for programs work. Help. I have IE8. XP pro74 free concerts on drive c 400gigs e and d

  Is this the same computer as in this thread previous & abandoned of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/remote-desktop-wont-connect-win-7-to-win-xp-pro/d0995287-356b-4e1f-aa51-1813625b4014