Digital pad Presario does not

Similar Questions

• Toshiba Satellite A200 Synaptics Touch pad, scrolling does not work.

  Questions of Toshiba Satellite A200 SKU PSAF6A - 02Q01N Synaptics Touch pad, scrolling does not work.

  Operation system Win7 x 64, re-formatted and updated since Vista x 32, after having teething problems, install the drivers and do everything to work smoothly (for at least 2 months now), I managed. Today out of the blue the scrolling on the touchpad stopped working.

  I read on some forums that do, most said try using CCleaner to uninstall the driver and reinstalling.
  Tried to uninstall and reinstall the driver support Aus > drivers, done this, but received the error, (something) do not recognize the operating system.

  I went to the Synaptics site found a driver that has been recognized, it has installed but not really want to reboot the pc before I get some advice first. As there is a warning about the specific drivers for specific models and manufacturers...

  Help required, please.

  Hello

  Uninstall the existing touchpad driver and install it:

  http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-en-20090320132707.zip

  Recently, it has been already discussed on the dysfunction of the touchpad in this thread. But unfortunately it did not help him
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52689&TSTART=30

• When you try to insert a digital signature, it does not accept the password, I just reset.  How can I get include the signature?

  When you try to insert a digital signature, it does not accept the password I just reset for Adobe and will not let me. How can I determine what the password, it's who will give me access to insert the signature?

  Hello

  What is the error you get after inserting the password. Although there is no way to recover the password.

  You can simply create a new digital ID with a new password.

  Concerning

  Sukrit diallo

• Satellite L20-100 Touch Pad scroll does not work for Mozilla Firefox

  Hello

  Mine is a laptop Satellite L20-100. My touch pad scroll (the page scrolls automatically when you slide your finger upwards & downwards on the right edge of the touch pad) does not work for the Mozilla Firefox browser. It works fine with other applications like windows Explorer, microsoft word. When I try to scroll in the window of the Firefox browser, this isn't schroll at all. Please can someone help me?.

  Kind regards
  Anish

  Hello

  Read on the forum of Firefox:

  http://forums.mozillazine.org/viewtopic.php?t=221466

  If it doesn't help you, after your problem here

  Post edited by: Jeka -?

• the digital camera driver does not load when a sony camera is connected to the computer vista laptop.

  At the same time the downloaded movies netflix has more audio.  Device Manager does not display a driver of the camera when the camera is attached via firewire and running?  I tried to reload the drivers and worked with the pilot web-based updates.

  Hi mstradt,

  1. which version of the operating system are you using 32-bit or 64-bit?

  2. What is the model of the camera number?

  3. you try to use the camera of Sony for the first time?

  4. How do you try to connect the camera?

  You can first try connect the camera with the different port and check if it is detected.

  Also try to use only Sony 4 firewire cable 4-pin to connect the camera.

  You can also visit the following links and see if it helps:

  Can what types of connections and digital video cameras be used to import video?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-types-of-digital-video-cameras-and-connections-can-I-use-to-import-video

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Buttons on the touch pad G505s does not properly in game?

  This is the second time I am posting this because of no response:

  I recently bought a Lenovo G505s about a month ago. Everything goes well with her until I downloaded Steam and downloaded games. 3 games I downloaded are snipers and therefore requires the left button of the mouse. But when I click it to shoot, he is sometimes unresponsive and is very laggy. This isn't the fault of the game, as I tried in different, but the problem is still there. I tried to change the round buttons (so that the right button is left to aim and shoot) and it works fine. I'd rather have the usual way around fact does anyone have a way to solve this problem? has this happened to you?

  If it is necessary here are some specs for the pc:

  AMD A8

  6 GB of ram

  WIndows 8.1

  also the buttons and trackpad works quite well with everything else except the game like Minecraft. It seems that when I move with WASD, the button does not work but the click of the button.

  Can someone give me an answer please?

  only, I have solved my problem. While randomly browsing settings for my PC, I stumbled upon the Windows mouse settings and it turns out that the time for clicks has been in the Middle, which explains the shift. I have this disables and problem solved without help of Lenovo at all. Lenovo support team good job

• Left click the Satellite C660 Touch Pad/buttons does not work

  Hi guys!
  I own a Toshiba Satellite C660 (of course: P) anyway. Today, I was just doing what I do usually on my laptop,
  when suddenly the left button of the mouse has stopped working. (Bare with me, it's very weird to explain xD!) Also I can not 'left click' on my touch pad. I can still move the cursor with the touchpad and right click with the right button.

  I tried slightly shaking incase of crumbs, or something. Although I never eat around my laptop. It is not difficult to grow as there is something under it, it just doesn't work!

  In summary, I can't left click. But I'm able to move and made a click right, weird!

  For the moment I have my USB mouse plugged in my computer and it works fine, but it is very annoying!

  Sorry if I don't explain it too well!

  Help, please!

  On this virtual path, it is not easy to say what the problem is here. It is not easy to tell if the left touchpad button is faulty or disabled in some way.

  As a first step, you should check all the settings for the touchpad. If your laptop computer has preinstalled software check Synaptics all parameters associated with the touchpad buttons.

• Digital TV suddenly does not work. Problem updating firmware?

  Hi everyone, I hope someone can help!

  A few months ago, I bought my Bravia Sony 4 K KD-43X8309C at the beginning of August and it worked great. Everything has been fine. I'm going to turn it on this morning (Sept. 30) and have no digital TV, the picture is just empty. TV otherwise works great, Internet, YouTube/Netflix is all good, just Digital TV. Strange I never changed any settings.

  I did some research and realized that today ' today is the release of the new Firmware which I think my TV has automatically downloaded and now not working not just for some reason any. Is there a problem with the Firmware as its quite by chance that the problem started exactly when it was available. I hope you can help!

  All fixed, I went into settings/Factory Reset and erased all settings and put in place from the beginning. Must not uploaded the Firmware correctly but made the second time around.

• Qosmio X 300-pad touch does not work

  Hello, I opened and cleaned my toshiba qosmio X-300-130 and when I turned it on evrything worked fine except my touchpad that it did not work or the buttons, so I reinstalled the driver PAD SEMANTICS, but nothing changed so I reinstalled my WINDOWS 7 64-BIT but once again no change, pls pls help!

  I don't know how to help you. All we can say here is that you should check the connection of cables tochpad and be sure that all three touch pad flat cables are correctly plugged into the Council of touchpad.

• digital output usb6009 does not switch does not correctly

  Hello

  I have a little problem with my 6009.

  Basically, I switch the inputs of a Demux (74HC238D) (3 lines) write an address on it to select rows of data off the Demux.

  The signal from the acquisition of data through an FPGA and the signal is displayed on the input pins Demux.  That is the problem.

  (It is worth noting that the FPGA is well programmed (coz if it was'nt then the signal would not get the demux in the first place.))

  When I connect the inputs of the FPGA to 3 digital lines of data acquisition and scroll lines (turning each one WE and OFF), the signal appearing at the Demux pins is not a proper logic level. (the voltage I measured the scope is about. less than 1.1 V). For this reason I choose any line, Demux output will always be on the first channel and will not select the other channel.

  I tried the same test 7 connect supply of 5V data acquisition (each line) and after having programmed the FPGA, the correct voltage level is available on the DEMUX pins. The problem occurs when I try to scroll through the entries via the software.

  I'm not which is the cause. My belief is the acquisition of data.

  What are your suggestions?

  Thank you

  Labmat

  Hi Labmat,

  The first thing that jumps out to me is the fact that you use these signals to interface with an FPGA. Outputs digital USB-6009 are 5V or 3.3V TTL and commonly FPGA i/o is 3.3V. Just to double-check, as FPGA did you use?

  Q: When I connect the inputs of the FPGA to 3 digital lines of data acquisition and scroll lines (turning each one WE and OFF), the signal appearing at the Demux pins is not a proper logic level. (the voltage I measured the scope is about. less than 1.1 V). I tried the same test 7 connect supply of 5V data acquisition (each line) and after having programmed the FPGA, the correct voltage level is available on the DEMUX pins. The problem occurs when I try to scroll through the entries via the software.

  A:  This no doubt hits the nail on the head. First of all, I'd be inclined to not use program any software directly and instead use some of the tools for debugging I/O connectivity that come with the Driver NOR-DAQmx. You can get these from the measurement and Automation Explorer (MAX).

  ' ' ' ' 'Start-up' all programs ' National Instruments ' measurement and automation.

  Expand the tree of devices and Interfaces in the left pane, and then select your USB-6009. Using the Test panels button on the right pane, you can quickly perform digital i/o with the device.

  Our best bet is to first take a multimeter and see if we can measure the correct voltage is distributed by the correct pins on the USB-6009 case.

  Now, by checking the box USB-6009 Datasheet, we can see that, on Page 17, there are a couple of different ways that we can configure the method by which the output signal is driven out of the unit; We have Drive open and active collector mode. It will assure you that since you are trying to send a signal to the FPGA, the unit must be set to active training mode, in order to generate signals from 0V to 3.3V . Output open collector allows the generation of signals from 0V to 5V . This can be done through property OR DAQmx nodes in LabVIEW.

  In terms of current...

  The + 5V line that you used for the FPGA Nailer is evaluated to 200 my. General DIO lines on the USB-6009 case can generate a current up to 8.5mA. This limitation fits the specifications of digital input of your FPGA?

• Western Digital Passport essential does not eject on Windows 7

  This "response" just to change the subject.  He spoke in XP disk "is"ready to be ejected"", and so on. "  but the problem here is Windows 7, there is no such situation "ready to be ejected.  The rest of the 'response' comes from an impossible situation.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/western-digital-passport-essential-cannot-eject-on/c0aa270f-cf7a-e011-9b4b-68b599b31bf5

  Hello

  Facing this problem with other USB devices as well?

  Here are possible causes:

  • In most cases, this is caused by antivirus or anti-spyware installed on your PC application. You will need to contact your specific anti-virus or publisher of anti-spyware to help determine if this is the case.
  • If the disk contains a partition NTFS, indexing can be activated.
  • There may be some other third party software which is still accessing the drive.  This software is most often safety, management of storage or backup utilities.
  • If your disk contains WD SmartWarr it can actively scans your system. Make sure you have stopped all operations of backup progress.

  You can consult the following article;

  http://wdc.custhelp.com/app/answers/detail/A_ID/274

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Return to the State of the question

• Presario does not start

  Presario CQ61 won't start. It flashes the witnesses power and drive forward three times but nothing happens. It was running last night when I left this download a upgrade to WIndows 7 (I don't know who, alone of the automatic upgrade) and he said "do not turn off." Is there any hope for him?

  I found the problem. Your advice was leads me to a bad decision. Duh. I should have checked that before worrying about you all. Thanks for the good advice.

• HDR5010KB-digital recorder - signal does not always come through the use of HDMI

  Hello

  I bought the product above in October. Since then, I have had intermittent problems. When switching on the channel AV on my TV (a Panasonic TX-P42S20B) signal is not always crossed when you use the HDMI channel (I also connected via a SCART, and who works so always seems to be a problem HDMI.) It is particularly obvious when the recorder has been used for a while (be it for recording or playback.) It is not overheating (or if this is the case, not to the degree I get a warning message) and turn off the power to the electric network seems to correct the problem, but it's a pain.

  I tried to change the hdmi cable, as well as to try different channels AV on my TV and it did not help. Is this a common problem or make me a defective unit?

  Any suggestion would be appreciated

  Have you noticed the same problem using other devices connected to your TV (using the same cable)?

• Input data for digital indicator tab does not exist

  Hello

  I'm trying to define the range of data for the numerical indicators on LabVIEW 10.0.1. For some reason when I go into the properties of my digital indicator, there is no input data tab as explained on the Web site of NOR: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/changing_data_ranges_of_nu/. In addition, in the tab data type, there is a section for the range, but everything is gray. Any help is appreciated. Thank you

  Dig up a very, very old manual (1996!) isn't all that productive. If you want to restrict the output, just use the function in the range and force.

• Why my digital photo timestamp does not change an hour when I watch it on XP and Vista?

  I have pictures stored on an external hard drive.  When I look at the timestamp for the pictures, the weather changes an hour.  For example, on Vista computers it will show at 11:14 and when the external hard drive is connected to the computers XP the same image shows the timestamp at 10:14.  Each photo with a time stamp will show a difference of one hour.

  All computers (2 + 2) are set to the same time zone and the time automatically change.  The timestamp shown in mountain time zone, but that shouldn't make any difference that it simply means that the time stamp on the original camera took at the time of the Rockies.  It's just that I do not see why time passes at a time according to XP or Vista.  If this is indeed the reason for the time has changed.

  Who knows what happens?    It is somewhat important to me because the photo in question is taken from the balcony of a hotel room at 08:14 or 07:14, and an hour's difference may indicate that my wife slept there with another man or just dropped by this morning to say 'Hi '.  At this time of the year, mountain was different from the time of Honolulu three hours.

  something wrong with vista zone

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-date-and-time-a-picture-was-taken