Digital synchro recording signal using PFI0/PFI1

Similar Questions

• How to use my PC as a digital video recorder (Windows 7, 64-bit)

  Microsoft community,

  Issues related to the:

  I want to use my new PC as a digital video recorder, but I have trouble to know how to do. I'm trying to figure out how to get Windows media Center to record shows to my HD TV Box Charter? I know that I need two things to help and support. ((TV tuner) 1 and the TV signal source) 2.

  (1) first for the TV tuner: I guess that I need something like this... http://www.Walmart.com/IP/Hauppauge-PCTV-801E-se-HD-Pro-TV-tuner/15125571

  (2) what is a TV signal source? Is it just my TV provider for example Charter TV, live TV etc.

  My computer specs:

  Windows 7 64 bit

  ASUS Essentio Series Desktop i5

  AMD Radeon 7770 graphic card

  TV provider:

  Charter Communications

  Any help would be great,

  -TJ

  Hi hotmishchief,

  Please ask questions!

  If I understand correctly, you want to know how to use the computer like a TV. To answer your questions, you will need a tuner TV and a TV Signal Source which is the cable from the TV Signal provider to connect with the TV Tuner.

  Check out these links that will guide you in setting up your computer as a DVR.

  Demo: set up a TV tuner and a digital video recorder with Windows Media Center (Applicable to Windows 7)

  For more information, see the links provided.

  Set up a TV signal in Windows Media Center

  What should I know before adding TV tuners to use with Windows Media Center?

  TV signals that are supported by Windows Media Center

  Let us know if this information useful. I'd be happy to help you further.

  Thank you.

• How can I use the USRP to record a signal using its two RX ports simultaneously?

  Hello.

  I am trying to record a signal using two antenna cone. The reason that I need two antenna to cover the bandwidth (DC - 6 GHz). a single antenna covers DC - 300 MHz and the other covers 300 MHz to 6 GHz. so I need to use two RX port of USRP at the same time to record the signal. I have two questions:

  1. is this all USRP market capable of covering this frequency range?

  2. is it possible to use the two RX port at the same time to the signals of the records I described? If this is not the case, how can do?

  P.S. I have two NI2920 USRPs and two USRPs N210 in my lab.

  Thanks in advance for your time.

  Sam.

  Hi Sam,

  To answer your first question, the USRPs you can reach the bandwidth you want. There is not a USRP, to my knowledge, that can reach this range in a single device.

  Also note that you can only use RX convened for two different ports at the same time using LabVIEW and the pilot of the USRP. If you want to use the two lines of RX, you will need to run a session with a single line, close the session and then start a different session for your second RX line.

• Can I use a digital voice recorder with windows speech recognition

  I want to use a digital voice recorder to transcribe in Windows Vista or windows 7 speech recognition. So far, I only got responses like 'Use Dragon'. I don't want to use Dragon! I want to use my trained and perfectly good windows Vista or Windows 7 built into the software. Please, anyone, just a direct response. I will buy from any digital voice recorder can transcribe Windows.  I am well aware that I can use dragon so please don't keep advise me. I travel a lot and do not always have access to a pc equipped with dragon or tablets. But I still have windows vista or windows 7 built in. Would be very happy a good answer (and any settings if necessary >) thanks guys.

  Hello

  I suggest you check with the Windows Compatibility Center, to check what digital voice recorder is compatible with Windows 7 and Windows Vista, since the following links and you can use these digital voice recorders.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=digital%20voice%20recorder&type=hardware

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=hardware&s=digital%20voice%20recorder

  Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Can I use a digital voice recorder Sony with windows vista, speech recognition?

  Original title: recognition of Windows Vista SP2

  I recently bought a Sony digital voice recorder to record meetings. Is it possible to use speech recognition with this device? I downloaded the files to the MP3 format.

  WAV files as input for speech recognition?
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/5eb86a60-4b91-4687-A2DD-e50ad792c5d8

• Problems to connect a HP dual TV Tuner digital video recorder

  I have a HP Pavilion dv6700 notebook PC (product # KC313UA #ABA) & s been with windows 7. At home, I have dish network (hopper w / a joey). I have a HP Dual TV Tuner / Digital Video Recorder that I'm trying to connect it to my laptop. I understand to make the cable plug. But nothing comes up on the screen of the laptop. The orange light of TV Tuners. I looked up in the PDF file for the tuner, that means that some software is not installed. I bought the Tuner second hand, so if it came with the software in the area of the orginal, I don't have it. I don't know if this the reason that my lapto is no TV Tuner or that I went step by step what says the PDF for HP TV Tuner, so I think it's a software problem. Maybe a download for usb. But Windows Media does not receive a sygnal of the tuner. Could you tell me where to find the downloads that I need. As long as it free I can get them. Thank you for your help.

  Hello

  Thanks for posting your query in Microsoft Community.

  a. What is the edition of Windows 7 installed in your system?

  have b. you been able to connect to the TV Tuner using before WMC ever?

  To receive a TV signal to your computer, the signal type must be supported by your TV and Media Center tuner hardware. After you have connected a compatible TV signal to your computer, you can set up the signal in Media Center to watch and record TV shows and movies. I suggest you refer to the following article for more information about TV tuners prior to use with Windows Media Center:

  What should I know before adding TV tuners to use with Windows Media Center?

  Also, see TV signals that are supported by Windows Media Center:

  TV signals that are supported by Windows Media Center

  Finally, check out the following link on how to set up a TV Signal in Windows Media Center:

  Set up a TV signal in Windows Media Center

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Accelerometer (voltage) of the signals using the module NI6361 (PXI)

  Hi guys,.

  I posted this question once again, but I still have problems with the acquisition of data. I'm acquiring a voltage signal by using an accelerometer module and single voltage NI6361. I would like to set up the accelerometer to measure a range of signal between + / 5000g.

  The accelerometer sensitivity = 0,516 mV/g where

  1 g = 0,000516 Volts or

  1938-g = 1 Volt or

  5000 g = 2.58 Volts

  -J' left the signal conditioning with +/-10 Volts (despite the fact that there is another option value +/-5 Volts as well)-please see attached pdf

  -I entered the units sensitivity to g

  -J' put labview to measure a signal between +/-10 Volts to the single a complete axis accelerometer.

  -An oscilloscope was related to the card, and she won the same vertices with the LabVIEW. -Please see attached pdf

  -By knocking gently on the accelerometer, the recorded signal was 400 mV = 0.4 V where he gives an acceleration of 775g.

  -L' accelerometer is also fixed on the ball for a shock test fell from a distance of 50 mm. The recorded acceleration was 4000g which is quite high for such a small distance. I expect an acceleration of about 200g of 2 to 4 meters according to some documents as well.

  Can you please give me any help on the way in which the parameters are specified correctly between the accelerometer and the coupler? I'd appreciate it highly if you can correct me if anything of the above statement is false. I have attached a PDF for your convenience.

  Kind regards

  Since gain is the scale factor for tension, you must divide your results by the gain.

  g = voltage / (sensitivity * win)

• Sony digital voice recorder ICD 520, windows 7

  Can someone point me to a solution using a digital voice recorder Sony icd 520 with windows 7, is there driver for this patch?

  Hi joescrim,

  I found the following link on the Sony site with necessary additional software/information on what makes your compatible devices:

  http://support.Sony-Europe.com/DNA/compatibility/Win7/dna_win7.aspx?site=odw_en_GB&m=ICD-P520

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Olympus VN - 480PC Digital Voice Recorder Media Player not working, receive error message: "no driver file found." » »

  Original title: Olympus VN - 480PC Digital Voice Recorder Media Player

  I recently bought a new computer from DELL (Inspiron ONE 2320 with Windows 7) desktop and I connect my Olympus VN-480PC Digital Voice Recorder Media Player with the PC (to download recorded files), but it does not work... "no driver not found file.." After some trial and error I find Olympus webbsite and find appropriate... but then it won't... they have a problem at Olympus and cannot deliver a driver file... I tried 2 or 3 times in the last 6 hours... what to do? Can tell you Ms them the probem? Thanks in advance...

  Hello

  Are you running the 64-bit or 32-bit operating system?

  If you use the 64-bit operating system, you can try to download and install the drivers from this link and check that it works.
  http://www.olympusamerica.com/cpg_section/cpg_support_downloads.asp?ID=1175&OS=w

  If the problem persists, please contact Olympus. As they develop device drivers for their hardware, they can help you with this problem.

  http://www.Olympus-IMS.com/en/support/

• Can I get the contacts and email from an old record without using the Migration Wizard?

  Can I recover Contacts and messaging of an old record without using the Migration Wizard? Disc of the user in question has been very corrupted with several programs having a weird behavior. Migration wizard migrated corrupt files, so, even a clean install with only migrated users gave rise to an unusable installation.

  I have now all own installed now, but need old email files and contacts. How can I transfer this information a copy of the old/bad drive and only this info?

  Yes. With the old drive mounted and available, open Mail and choose import mailboxes... from the file menu of mail. In the dialog box import data from , choose Apple Mail.

  Navigate to the Mail folder to the user of the old library drive. According to the version of courier used, you might see folders named V2 and / or V3. Choose the applicable folder, and then click Choose.

• Reading of analog signal using DAQPad-6016

  I'm reading an analog signal using DAQPad-6016.  An entry is on the ground, the other is Vdc.  I can't operate at MAX and I'm confused becaue MAX alone gives me an option for differential reading, but the list of pins give enough information on how to connect in a different way.  Is there a reference as well?

  Hello, Bernadette.

  This link should have what it takes to equip themselves properly: http://www.ni.com/gettingstarted/setuphardware/dataacquisition/analogvoltage.htm

  After that you have put work in place, specifically see step 11 for check the connections of the device.

  I hope this helps!

• email an mp3 file. (recorded on a digital voice recorder... personal folder. Comcast. says the file is too large (1.4 MB)

  I'm trying to e-mail a personal voice recording on a digital voice recorder.  Google and Comcast rejected the message, indicating that the server of the recipient (Comcast) has rejected as too grand (1.46 MB) of the suggestions?

  I'm trying to e-mail a personal voice recording on a digital voice recorder.  Google and Comcast rejected the message, indicating that the server of the recipient (Comcast) has rejected as too grand (1.46 MB) of the suggestions?

  =====================================
  1.46 MB isn't a very large file... I think the Comcast
  limit is something like 10 MB. The problem may be with the file
  format... try to rename or compress the file and see it done
  a difference.

  Example... If the name of the file has been voice.exe replace voice.jpg
  and to inform your recipient to change back before playing.

  Another alternative would be to download the file on the following
  the site and send the download link to your recipient:

  "SendSpace.
  http://www.sendspace.com/

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• HDR5010KB-digital recorder - signal does not always come through the use of HDMI

  Hello

  I bought the product above in October. Since then, I have had intermittent problems. When switching on the channel AV on my TV (a Panasonic TX-P42S20B) signal is not always crossed when you use the HDMI channel (I also connected via a SCART, and who works so always seems to be a problem HDMI.) It is particularly obvious when the recorder has been used for a while (be it for recording or playback.) It is not overheating (or if this is the case, not to the degree I get a warning message) and turn off the power to the electric network seems to correct the problem, but it's a pain.

  I tried to change the hdmi cable, as well as to try different channels AV on my TV and it did not help. Is this a common problem or make me a defective unit?

  Any suggestion would be appreciated

  Have you noticed the same problem using other devices connected to your TV (using the same cable)?

• Manchester in transmission/reception of signals using the digital output of the PCI-6224

  How a manchester signal can be sent and received using the OID of the pci card 6224?

  I want to create a signal NRZ manchester on a digital output channel and then have the possibility to receive and interpret the same type of signal on a digital input channel.

  Any help would be greatly appreciated.

  Hi VJohnson,

  You might find this post of discussion forum useful.

  Looks like LabVIEW has not Manchester coding/decoding built, but do able in your VI by replacing all the elements with the corresponding elements of two and using double the speed of transmission as your clock frequency.

  Thank you

  Scott M.

• Graph of digital signal using binary numbers.

  I need to generate digital signals 4.
  I have created a binary number which represents the 4 signals. (I don't know if I integrate it properly).

  Issues related to the:

  1. How can I represents the binary number (4 signals) in a digital chart?

  2 - is the right way to generate digital signals?

  I need something like this:

  

  Your code is meaningless.

  • Why you build an array with one element is there is always only one item?
  • Why are you doing floating point operations dealing with whren of integers?
  • Your VI does not have a digital signal graph.

  Try something like the joint to rotate the pieces...