Disable a connection on the box

Similar Questions

• To connect to the box of ubuntu via VPN via a server

  I have a ubuntu box connected to a SBS2003 server. A VPN tunnel to the SBS2003 server, I see each machine connected to the network - including the Ubuntu machine. However, when I try to access the files on the machine of Ubuntu, VPN, I can't make a connection with it. I don't have this problem when I connected directly to the network while in the office - I can see the Ubuntu box and access files on this computer. Any ideas?

  Any help is appreciated.

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/categories

  It will be useful.

• Can not disable "automatically connect" option on WIFI connections

  What I think is really strange or normal.

  I have windows 8 on my laptop and a wireless adapter Inter Centrino N-2230.

  Recently, all the WIFI connections that appear as available have the option "auto-connect" checked. I uncheck the box, but they will be automatically checked again.  I don't know that previously, all wifi connections before the box unchecked by default.

  However, this is NOT the case with the WiFi one, I mainly use, IE my home cable connection. I can uncheck the option for this one and it remains disabled. Weird.

  I'm a bit worried that if I use my laptop near an unsecured connection, it will automatically connect to it without my knowing which resulted in security problems.

  No idea if it's a problem and how to solve?

  Thank you

  I guess all the machines of boredom that are automatically connect using Intel PROSet Wireless Tools.  Simple fix.

  Go to the control panel.

  Type Wireless in the search panel.

  If Intel PROSet Wireless Tools is an option up until it clicks (so you can have another problem)

  Under the Intel Wifi HotSpot Wizard option, click settings

  Uncheck the box to automatically connect to free WiFi Hotspots.

  Click on close

  Your DONE!

  Problem solved unless you do not use Intel PROSet Wireless tools.

• Layers down when you click the box 3d, motion blur, etc.

  I looked for an answer to this question, but couldn't find anything, so...

  Since the upgrade 2015.3, any time I click to enable or disable an option in the boxes for things like 3d, motion blur, lock the layer, interpolation, as well as other simple actions, rather than just by turning the option or not, the whole layer falls showing transformation, effects and audio data.  This happened with another version, but Adobe hastened to repair so it does not lead me to the point of madness.  This time, however, they seem to ignore, or don't care and are just ranking as "in order to help with the flow of work" which he KILLS my workflow, it helps any...

  My question is, does anyone know how to solve this problem, or if Adobe is working on a fix?  Today is the day, he pushed me over the top when I have a comp with 40 + layers and I need to activate or deactivate the motion blur that I saw... I hate Apple Motion, but if there is no solution, and before I go ballistic eager to break through the wall of After Effects, it's my option if no one can help me.

  Please help.  I hate interruptions in workflow.

  Thank you!

  Dan

  Thanks for your help, but I'm not sure that we are talking about the same issue.

  It seems to be the same problem. your layers have audio when clearly, they do not need to have the audio. Text, shapes and the whirlpool down problem. read Tim Kurkoski answer in the link I gave you:Re: new in After Effects 13.8.1 - with audio shape layers!

  The bug occurs when you work in a model that has been composed before and this model contains a layer with audio, when you add a new layer to this model (any type of layer except the cameras or lights), if this layer should not have audio it will win the audio properties in any case. When you click on a layer switch (for example, solo, lock, a blur of movement, etc.). these layers with superfluous Audio properties will automatically be twirl open their properties.

  See the workaround suggested and if it's a big problem for you, as I have written before - work in 2015.2 until it is fixed

• How can I disable the password appears in the box of wireless network properties security password when connecting always automatically?

  My netbook IBM X200s running Windows 7 is configured for you automatically connect to my internet TalkTalk router with the password defined. However, when I view the window wireless connections available in the taskbar and right click on the connection-> properties-security password is sitting in the area password - with the option to "display characters. How to turn off the box to show the password in the first place while retaining the automatic connection to the opening?

  Hello

  Welcome to the Microsoft community.

  Unfortunately, it is not possible to disable the password to appear.

  See this link for more information:

  http://Windows.Microsoft.com/en-in/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  Please let us know if you need help with Windows.

  We will be happy to help you.

• wireless network connection to publicnetworks automatically continues and won't let me not uncheck the box

  I continue to uncheck the box automatically connect and it occurs again, I can't delete the channels in the list.

  Hello

  1 are there any changes made recently to the computer?

  2. what version of windows is installed on your computer?

  In case you have Windows 7, try these steps.

  (a) click Start.

  (b) in the start search bar, type network and sharing Center.

  (c) click on manage networks wireless (in the left pane) and click on the one you want to change.

  (d) and then click Properties.

  (e) now, click the connection tab.

  (f) there are three fields that can be modified:

  (g) to connect automatically when it is worn, to connect to a more preferred network and connect even if the network is not broadcasting. Uncheck all three options which allows you to disable the automatic wireless connection.

  Refer to this article.

  Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  I hope this helps.

• You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable.

  Unplugged network cable?

  Recently I get this message then on the line. You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable. It is very aggravating. Can someone tell me how to solve this problem? It might have something to do with my firewall? I recently downloaded mozzilla firefox if I could play words with friends, because IE would not work on the game.

  Hi LouisteanGriffin,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• always impossible to disable the keyboard to display even the box is unchecked

  I am using asus eeepc1001pg windows 7 starter edition, I followed the instructions to disable the check box on the box for the keyboard to screen on and rebooted but it isn't always turned the osk. I can connect to my laptop with the keyboard and after as I cannot use my keyboard to type the web address and even microsoft word characters. Please help as soon as possible...

  Hello

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (a) click Start, type regedit and press ENTER.

  (b) go to hkey_current_user\\software\\microsoft\\windows\\currentversion\\run

  (c) If you see a value under the given location above which runs osk.exe, delete this value.

  Hope this helps.

  Diana

  Microsoft Answers Support Engineer

• Get the message to disable FIPS by connecting to the Internet

  Original title: error message

  When I connect to internet, I get a window message saying I should disable fips & to go click on Administrative Tools control panel, I can't do it as I am new to this sort of thing, can someone help me please. Another problem I have is with my emails if I have to open an image, I get the point, but it doesn't allow me to go to see. I don't know how to tackle these problems. Help, please.

  Hello Ann,.

  1. what browser do you use to visit Web sites?

  2. were there any changes (hardware or software) to the computer before the show?

  Question: disable FIPS

  Disabling FIPS in administrative tools may help get the problem solved.

  Perform the steps below, if you are using Internet Explorer.

  Method 1: Perform the steps mentioned below and see if it helps.

  a: Open Internet Explorer

  b: Then click on Tools > Internet options

  c: Under the tab Advanced , under Security, make sure that the following check boxes are selected

  • Use SSL 2.0
  • Use SSL 3.0
  • Use TLS 1.0

  d: Click applyand then click OK.

  Method 2: Perform the steps mentioned below and see if it helps to get the problem solved.

  a: Press the Windows key + X

  b: then click on Control Panel

  c: Click Administrative Tools, and then double-click local security policy

  d: In local security settings, expand local policies, and then click Security Options

  e: Under the policy in the right pane, double-click on System cryptography: Use FIPS compatible algorithms for encryption, hashing and signing, and then click disabled.

  I pnnc: can not display the image in the email

  What mail client do you use to access the mails?

  Method 1: Download the image to the desktop and now try to open it.

  Method 2: Right-click on the image, choose open with.

  Select Windows photo viewer and check if the image is opened.

  Method 3: Check if your antivirus software is blocking the file.

  Disable third-party security software

  un) taskbar next to the clock on your computer screen system...

  b) you'll see the third-party security software icon.

  c) click the third-party security software, you will see a pop up.

  d) that pop and select the option to disable, click on it.

  Now the third-party security software will be disabled.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If you have questions related to Windows, please do not hesitate to post. We're here to help.

• Disable the Internet connection for the virtual machine.

  Is it possible to disable the internet connection to the virtual machine from Windows XP with on the neutralization of him on my Mac?  I just want to connect to the internet if/when updates are required.  Any other time.

  I run Windows XP Pro SP1 on VMware Fusion v. 2.0.1

  You have a virtual NETWORK adapter, Fusion UI calls it just a network adapter (which, due to a bad design, choice flowing from the settings box, but it's another criticism for another time...) This screenshot shows a disconnected virtual NIC:

  

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• How can I disable the guests to connect to the iTunes store?

  I get intrusive pop-up messages on my iPhone to connect to the iTunes store. How to disable, or completely remove the app store iTunes from my phone?

  You cannot remove iTunes Store from the phone, it's a native iOS. You should not be asked to connect to the store unless you try to make a purchase. You can go to settings > general > Restrictions and restrictions put in place for the iTunes Store. That could very well stop the prompt. At least, you can try that. When you set up Restrictions, make sure that you write the access code, because there is no way to recover/reset this password without wiping your iPhone completely.

• Qosmio G30-116: how to connect to the Sky Digital box to watch TV?

  I recently bought the Qosmio G30-116, with the understanding that I can connect my digital Sky to the laptop (somehow) and watch and record the sky on the laptop

  * note: I do not use TNT or TV I'm on SKY DIGITAL *.
  SINA the converter cable provided to connect the video in on the laptop (video is like a headfone Jack and converter converts to this female RCA/RCA)

  I connected on the laptop and then connect a RCA 3 SCART toward it then in the area of the sky, when you set up the TV section in Windows Media Center, I followed the instructions until it gets to the point where it scans a signal, (before that I wonder what kind of signal that I receive, I select digital but have tried all combinations in) but it does not find a signal.

  Now I was told that Windows Media Center doesn't support analog input and the connection between the sky and the laptop is analog.
  Is this correct or not? then, while typing this I learned by someone else that my laptop is not capable of receiveing SKY DIGITAl as it cannot decode or something. Is that also correct? If not, can what am I doing wrong, and someone help me to get it going? And I go about it the right way or I'm quite the wrong way if the laptop is capable of it?

  Hi Liam

  AFAIK if you are using an external receiver (sat receiver or even sky digital box) the laptop can bring out just what external device send to the laptop. You can connect your external case to the laptop using composite to the port (transfer of video and audio signals). After that, you can start Qosmioplayer and analyze the available channels.

  You will find a program, but the different channels, you must select the box itself. If a channel must be registered, use Qosmioplayer save option.

  The same must be possible with WMCE. I'm not 100% sure but I also think that the connection between laptop and Skype is analog.

  Sorry, but that's all I know about Qosmio. I tested it with Qosmio G20.

• Speakers are disabled if Satellite Pro is used without connection to the sector.

  Could someone help. Recently I unplugged my computer to use just the battery mode. When I switched it on it took awhile to load my settings but also the speakers have been disabled. I had 3 hours of remaining battery life. When I connected to the Socket returned sound but I lost the "speaker" icon. That's happened?

  Hello

  first of all, because you wrote that failure is there for some time (not from the beginning, failure does not appear when the laptop was purchased), I would try to exempt all the software problem. To do this, the best way is to recover the original laptop with Recovery CD/DVD.

  If you've already tried this, I recommend contacting the local toshiba service partner.

  BR, rYan

• I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

  Program network networking Internet website website URL website network

  I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

  Help!

  Hi Barry,.

  MSE is not the cause.  I suspect two things.  One, some ports in the firewall must be enabled to access the internet (your ISP should be able to tell) or you use a wrong port which is not activated, while the is correct.

  Second, you set up like a dial instead of a connection to the local network through the router (which must also be configured and secured if there is no wireless capability), and then the LAN must be connected to the internet.  Essentially, your network configuration is incorrect and must be corrected.  As a general rule, all you need to do is contact your ISP technical support and if you walk through the process over the phone.

  That's how I would handle it because even the experts here is perhaps not able to determine the appropriate settings for your ISP gave your versions of Windows and brands of routers and modems (and everything that needs to be connected).  They lose your business if you can't connect, and they have people who simply as for a life - often 24/7 - they are generally useful and really good in this.

  If that doesn't work (and I bet than that), and so that I could take you through it here in general with more information about your hardware, OS, ISP and other, this is the wrong forum for this.  You start here: http://answers.microsoft.com/en-us/windows/forum/networking?page=1&tab=all&tm=1300700638376.  Near the top, select your operating system from the drop-down menu to access the appropriate forum for your system.  Then post here like you did here, but give them all the details (manufacturer, brand and model of computer, network equipment, your exact version of Windows, what browser you are using and your network configuration).

  Good luck

  Kosh