Diskpart.exe not extending XP SP3 volume

Similar Questions

• Trying to extend the c drive with space unallocated in diskpart.exe - I get the message that there is not enough space. what I am doing wrong?

  DiskPart.exe help - not enough space - I have more than 5 GB of unallocated space. trying to expand the C: drive

  Hello mark_kman,

  Thank you for visiting the Microsoft answers community.

  It sounds as if you have multiple partitions. Disk management and DiskPart extends the volume with a focus on the next contiguous unallocated space. For basic volumes, the unallocated space must be on the drive and must follow (have a plu sector offset number than) the partition with focus.

  If you are looking at disk management, this means that, if you look at your partition C: the unallocated space MUST be located directly to the right of the C: partition. If you have another partition between the two, you will be allowed to extend the partition directly to the left of the unallocated space.

  This could be a work around, if you have C: and D: and have files on D: but have more space.

  -D: shrink to create just enough unallocated space to store your files located on D:.
  -Create a new partition with unallocated space to move your files.
  -Move your D: files to your new partition.
  -Now, to delete the D: partition

  This creates unallocated space between your C: partition and the new partition that you created to move your files.

  -Now right click on your C: partition and extend as usual.

  Hope this helps
  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Image of XP SP3 not extending the full disk correctly or not displayed correctly.

  I use HP 7600 P4 2 GB, 40 GB HD PCs I have an image (XP, SP3) which included the "ExtendOemPartition = 1" command in the sysprep file. On some installs the image extends to the full 40 GB drive, on others it isn't. Readers who do not extend correctly shows only the image of the original 12 GB total size, but the title of the disk management, the chart displays the entire C drive extended to the total size of the disk 40 GB. So, on one screen, I see the C drive, listed as a 12 GB drive and a 40 GB drive at the same time.

  The only reference I could find for this was http://support.microsoft.com/kb/329826, and that seems to apply only to Windows 2000.

  So, two questions really. :
  1. How can I fix the readers to use the full drive space as it should. A solution that works remotely would preferably like some of the PC already delivered to remote locations. These locations are connected through the VPN and the stations are available with VNC.

  2. How can I prevent the same mistake from happening on future images? At the moment it seems random, and since we use identical hardware, I'm not sure that there are variables to check.

  Any help would be appreciated.

  Hello

  The question you posted would be better suited to the TechNet support forum. I suggest you to post the question on the following link.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• PC Hung and will now restart not [XP Pro SP3]. SYS error at startup as follows; Lsass.exe - system error. The endpoint Format is invalid.

  Original title: PC Hung and will now not restart not [XP Pro SP3]

  PC Gardner - [open Excel, open outlook, being viewed in PDF and word doc being edited].

  Restarted, then - loading SYS error window at startup as follows; lsass.exe - system error. The endpoint Format is invalid.

  Can not very well, or at the end of the message have to turn it off. Tried to reboot several times, same result.

  Just before this happened was a dialogue window appear on my PC, which indicates that Microsoft wanted to investigate problems of software they had observed on my PC that I had not sent the reports to. I approved this request and they took the reports...

  Am currently bimbling turn of safe mode with networking.

  Any smart people able to help me please?

  Thanks George

  Hello

  We will try these steps and check.

  Step 1: Try using some know last good configuration and check.

  Step 2: System Restore from safe mode or safe mode with network.

  Reference:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• Failed: Could not find the system volume, reconfiguration is not possible

  Hi all

  When converting to a Server 2003 server to server ESXi 6.0.0 I received this message after all 96%.

  (FAILED: could not find the system volume, reconfiguration is not possible. ) )

  I use VMware vCenter Converter Standalone 6.1.1

  Anyone encountered this problem and found a solution?

  The log file is attached.

  Thank you very much!

  Terence

  Your problem is:

  2016 05-18 T 11: 09:48.300 + 08:00 WARNING vmware-converter-agent [02332] [sub Originator@6876 = Default] ERROR: [Mntapi_GetFirstBootDisk] more than * a * found active volume. Current active drive #0, another active drive #1

  Go to diskmgmt.msc and diskpart.exe and delete active indicator second disk/partition 1

  Also, keep in mind that mount point C:\backup\Ext\ is not copied.

  HTH

• Cannot extend a VMFS volume

  I have an installation of VMWare Essentials 5 I've updated since version 4.

  Initially, I had 4 300 GB drives in a hardware raid. After the upgrade to version 5, I added 4 additional disks and used the HP software to extend the logical volume to 1.9 TB.

  I am trying to add this new space to my store of VMFS data but am unable to.

  When I select my host in VCenter and go to storage in the Setup tab and then go to devices so I can see my disk is recognized as 1.91 TB.

  It also shows the primary and logical partitions current:

  Primary:

  1 BACK 16-bit < M 4.00 32 MB

  2 BACK 16-bit > = 32 M 4.00 GB

  3 VMFS 833,22 GB

  4 scope 896,00 MB

  Logic:

  1 BACK 16-bit > = 32 M 250.00 MB

  When I go to the store database properties dialog box and click the button increase then I should see the list of available free space.

  This list remains empty and so I can't extend the volume.

  The file system is 5.54 VMFS with a block size of 1 MB.

  Any help would be much appreciated!

  Regarding kind.

  Marcel bourdon

  Sorry for the delay, I did a rebuild of my test system these days.

  I have reproduced what you have and was able to successfully complete such VMFS volume that documented in the link I provided (except VMFS partition 3)

  I did install ESXi 4.1 U2 on a 900 GB drive, then upgrade to ESXi 5.0 and increase the size of the disc to 1.9 TB. Then I opened a session SSH, fdisk used to resize/increase the VMFS partition (which btw. is a primary partition with the new additional disk space adjacent to it) and expanded the cultivated partition using vmkfstools.

  If do not already rebuild you the host, please after af fdisk-lu as well as ls/vmfs/devices/disks

  André

• Airport Express does not extend WiFi range

  OK, I posted a long time will cost about an airport older Gen Express not extending my wifi range when implemented to extend (wireless) and connected to a network of Apple (Airport Extreme). No solution, so I gave up.

  Still frustrated by the lack of a strong wifi signal to my back door / Garden (it is a small house!), I bought a new Express and set it up again to extend my current network, placed it on my window sill back room (where I get a pretty good wifi signal on my iPhone and iPad), but about 6 feet of him, the other side of the glass in my garden I get a flicker of 1-2 bars the signal strength that is de-energized intermittently.

  I get no significant (or even vaguely reasonable) increase in force wifi when I approach from the Express, but increase next to the extreme.

  Or should I put either the express until properly (I'm sure I'm) or I am fundamentally misunderstand the term "extend a wireless network. Alternatively, I bought 3 years 2 defective Express apart.

  Can anyone help?

  See you soon.

  You have a handy Mac laptop? If so, we can run tests to understand the current quality of the signal at each location where you want to have a Wi - Fi access. If all goes well, we can find better place to place your Express extension for your goals of networking.

• my airport express does not extend to my network

  Hello to you all guru out there...

  I 5g internet and comes with the router and signal is fantastic in the main lounge, but it is a large apartment and once I get my room the signal decreases considerably.

  I bought an Airport Express and it connects to the wifi perfectly, green light and everything, but it does not extend my wifi network...

  Do I need to have another Aiport Express hooked up to the main router, then extend the Airport Express wifi or should I get an Airport Extreme?

  Any advice or help is greatly appreciated.

  Thank you!

  Do I need to have another Aiport Express hooked up to the main router, then extend the Airport Express wifi

  Yes, the "main" AirPort Express should be connected to your router using a wired Ethernet cable connection, permanently. This Express will be set to "create a wireless network.

  Other Express your distance can then be configured to "extend a wireless network.  In its current form, your existing Express is configured to "join a wireless network.  It will work for AirPlay like that, or allow you to connect a supported USB printer, but it cannot extend a network provided by a third-party router wireless.

  Regarding matching them things, it would make sense to use two airport expresses, or the two extremes of the airport.  The extreme might be your "primary" router if you wanted to, but the Express would not be able to expand the capacity of faster speed to the extreme.

• Terminal Airport express "could not extend network" after working fine for a week

  I bought an express airport last weekend and got on the rise and working on the 2nd floor of my house without any problem.  I had problems with reception shotty in my son, which is the furthest from our extreme airport room.  On Wednesday night, trying to connect to the woman in his room I continued loss of reception and so when I looked at my express it's orange flashing.  Pulled up to the airport utility and it says that the connection was excellent, but that the airport base station could not extend the wireless network.  The only thing I can think is that I used my iphone to listen to music through my apple tv the same day and I'm not sure if that set something off somehow. I have the express several times using the soft/hard factory redefined and methods without success.  Any help is greatly appreciated.

  BTW, I created this as an extended network. Try to read and understand any bypass but do not know if this is the right way to go

• Will only mirror 2 views will not extend poster in 10.10.5

  I have the latest Mac Air with 2 monitors of Garland of Dell U2414H. It reflects only every monitor that is pretty useless. It will not extend the poster. The Layout tab shows also the 2 monitors of different sizes when the settings are the same for each.

  The worst part is that they will reflect only when I chose to expand.

  

  Same situation with my MBA from 2015.  I have 2 screens Dell U2414, two who supported the MST and DP 1.2

  I can't get their mirror, they won't have the Garland.  I also tried to connect to my MBP 2014 with the same result. The only way I could extend the poster was to connect each monitor port thunderbolt/display on my MBP. Of course, it won't work with my MBA because there is only a single port TB.  I know the only other autour work would be to run a display on the port of TB and another a USB port with an adapter, which, in my opinion, is a terrible solution there is a USB port and not a mess on my desk.  Everything I've read, this is a limitation of Mac OS X, not a hardware problem. I run Parallels with a Windows VM on my MBA and he sees both displays fine with wreath using the port of TB on my MBA.  What gives Apple? Why intentionally block monitors third-party DP working with OS X?  Frustrating.  The other frustrating thing is that there is no work around what I see-

• Is it possible to delete or rename "Diskpart.exe" in "Windows\system32"?

  Hello

  Is it possible to delete or rename 'Diskpart.exe' or 'Diskpart.*' to 'Windows\system32 '?

  Thank you.
  Best regards.

  Why would you want to?

• computer does not start message "autochk.exe not found" followed of "stop: c000021a (fatal system error.

  computer does not start.

  the screen message is: "autochk.exe not found."

  second message is: "stop: c000021a (fatal system error)".

  «the session Manager initialization process ended unexpectedly with the State 0xc00003a (0x00000000 0x00000000).»

  "the system is stopped.

  Hi Bobzurcher,

  ·         Did you do changes on the computer before the show?

  I suggest you to consult the article in the Microsoft Knowledge Base and check.

   

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Let us know if that helps.

• I can't get into my control panel to change the security settings or anything like that. It says \windows\systems32\rundll32.exe not found. What should I do?

  I can't get into my control panel to change the security settings or anything like that. It says Windows\systems32\rundll32.exe not found.  What should I do?

  Hello

  1. don't you make changes on the computer before this problem?

  Check if the steps of troubleshooting the following article shows you help.
  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

• Stand By worked in XP Home, but not XP Pro SP3 on the same machine

  Stand By worked in XP Home, but not XP Pro SP3 on the same machine.
  How can I get Stand By under XP Pro SP3?

  * title Moose - see http://stlcc.org/SYS/Standby.bmp for the issue.*

  Hi srfpala,

  I suggest that you manually download and install the latest drivers for the graphics card graphics card or computer manufacturer's website and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

• Unable to Dassault catia v5 Setup error: CXINS.exe not found

  Original title: CXINS.exe not found

  My os is win7 32 bit, and I want to configure Dassault catia v5, when I click on setup, this error all?

  CXINS not raise in C:\Users\...\AppData\Local\Temp\TempDSUnload what should I do: its very important for me to install this software

  Hello

  1. are you able to install other applications?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 2: Problems installing and uninstalling programs on Windowshttp://support.microsoft.com/kb/2438651 computers

  Method 3: Clear the following temporary folder:
  \AppData\Local\Temp C:\Users\

  Also enable the option Show hidden files

  If the problem persists then I suggest you contact the software publisher.

  http://www.3ds.com/support/

  Hope this information is useful.