DiskPart / software RAID - disaster recovery

Hi guys,.

I have a VMware VM running Windows 2012 R2 DataCenter Edition. I tried to clone a DR test for one of my clients. I was able to start the virtual machine in Recovery Mode and use diskpart to assign the appropriate drive letters, etc. (it is a software RAID 1 mirror) after importation of disks (they appear as foreign at first) and the output.

I have tried a number of tools - however, when system - bottom line - restarts looks disks back to being at reboot - what makes the system unable to boot properly.

Any ideas on how I can get the data from partition table that I put in diskpart persist beyond a reboot?

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
*

Tags: Windows

Similar Questions

  • Satellite U940 PSU6VA - recover after removing the software RAID

    * My specifications: *.
    * Model: * Toshiba Ultrabook (Satellite PSU6VA - 00S 002 U940)
    * Operating system: * Windows 8.1 x 64 (upgrade of Windows 8 x 64)
    * Storage: * 500 GB + SSD 30 GB HARD drive

    This particular model of Toshiba comes with two hard drives (a HARD drive and SSD) and uses the SSD for caching purposes. I think to disable this caching so that I can use the SSD for other purposes.

    However, according to the observations of MannerhagenVPO in [this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=79976]:
    -This caching is implemented with a software RAID
    -To access the SSD, you must remove the RAID software
    -Once deleted, software RAID can be restored by an authorized Service Professional. Even the Toshiba recovery media will not be able to restore it.

    I'm not really worried about permanently losing the caching features. What concerns me is this: the Toshiba recovery media will always be able to restore Windows 8 (but without caching)? Or the recovery media Toshiba will become completely useless if software RAID is deleted?

    As far as I know the RAID features will be removed if replace you / remove or change the SSD or HARD disk drive.

    In any case, using recovery media created by Toshiba Recovery media creator software you should be able to reinstall the Toshiba preinstalled system

  • Need help with the disks 'unreadable' configuring software raid after the death of the startup disk and system restored.

    I'm looking for some advice on how to restore a windows xp installation software raid 5 that was running on my XP system. I had a problem when the startup disk has failed, but I was able to backup the system before it can. I replaced the drive and restored the system and everything came, but I was not smart to do this and accidently left the readers connected when restoring raid. I don't know if windows has done something when I tried to install XP on the new drive, or maybe something else has happened when I restored the system from the backup, but my raid drives can not be used. There was a moment in the restaurant business I saw a message on the MBR, but I thought that was just for the drive being restored. I didn't have a single player who held any information on the other disks in the system, but I'm not 100% sure on that.

    When the system boots the windows logo screen takes 10-20 minutes before you get on the desktop. Windows Disk Manager takes 20-30 minutes to fill the list of drives and status on the disks three raid is 'dynamic' and 'unreadable' is not reassuring. I suspect it's a problem MBR or partition table that must be corrected before trying to reactive the raid, but this is just speculation.

    The raid drives are on a promise ide/scsi disk and make it appear to start correctly with names and sizes. After that I get nothing. I do not have another scsi controller (or), but I thought I'd try active @ partition recovery to see if she can find information on the disks.

    I hope someone has some experience with recovery like this, because this is a first for me. I thought I was pretty sure running a raid-5, but wouldn't you know, the tech gods have found a way to crush my plans...

    Thanks in advance for any help!

    Hello

    Thank you for visiting the Microsoft answers community site. Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows XP IT Pro Forums.

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  • Disaster recovery with replication for VSphere

    Am just test VSphere 5 of replication. with a couple of test VMs

    The replication process works very well

    What I want to know is the process to recover a VM replicated to new hardware in the case of the complete failure of the original host and/or data store

    In essence, disaster recovery.

    Are there other parts (software), that I need to take the replica VMDK and files related to re - create a new virtual machine on a new host

    Steve

    Yes, because it will be all your hard and .vmx files.

  • Physical-TO-virtual disaster recovery

    Hi, what would you do in this scenario?

    • A heterogeneous set of physical servers (with Linux or Win) owned and operated by several customers in different locations.

    • A vSphere on a centralized site infrastructure.

    I wish I had in my infrastructure, a VM power off to each of the remote servers in physics and to keep the image of VM in phase with the remote disks.

    In the case of a remote site explodes, the corresponding virtual machines are started (automatically or manually) as a quick and effective disaster recovery solution...

    Forget the problems of network/IP of this scenario, is there a way or a 3rd party software to keep a VM'd synch with a remote server physical?

    Thank you!

    PlateSpin Protect will be repeated. You place the platespin on the physical server agent and you can replicate the server to an image file or a virtual machine. You can update the image or VM file on a regular basis. It comes from platespin powerrecon product.

    Check it out.

    http://www.PlateSpin.com/products/protect/

    Don't forget to leave some points for messages useful/correct.

  • Software RAID for Server 2008

    I have a PC that I want to load Server 2008, with two sets of HDD of 250 GB in RAID 1. My motherboard doesn't support RAID 1, can I find a software RAID that will work with Server 2008?

    What I found which seems to have worked. I installed the two 250 GB HARD drive. Then the loading of Windows Server 2008 R2 SP1, when he asked which will lead to load on, I chose the disk 0. After completing the installation of Windows, I went to disk management. I saw a disk 0 by a system reserved 100 MB, a C: drive with 232,79 GB type base and a GB 1, unallocated, 232,88.

    I have converted the disk 0 to dynamic. Right-click Disk 0, select Convert to dynamic disk.

    Then I have a right on the C: drive and selected click Add Mirror, selected disk 1, ok/next, then it C: mirrored on both drives. He left 100MB on disk 1 unallocated.

  • You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium. Do you know where I can find documentation and how - in?

    You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium.  Do you know where I can find documentation and how - in?

    Hello

    Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
    Please post your question in the below link:
    http://social.technet.Microsoft.com/forums/en/IECs/threads

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Upgrade to a windows vista at windows m9250f 8, lost software raid, he need to return.

    Cannot find the software raid. Don't know if it works or not.

    Here's the for Windows 8 64-bit raid driver:

    http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58558.exe

  • CUCM and IM & P 10.5.2 disaster recovery

    Come see if I any who can sanity check it.

    I noticed the other day on my IM & P servers that my last successful backup was 132 days ago. Now on my CUCM I do daily backups during the week, UCM, CDR_CAR, and IMP_AND_PRESENCE backup and I can see all 3 are saved OK to my remote destination.

    For me, this sounds like my Pservers & IM are saved through the master agent of the CUCM disaster recovery if the backup of the annex on IM & P servers themselves.

    It would also sound to me that I should be able to retrieve my IM & P servers, through backups made by CUCM.

    I can't seem to find a straight answer in the Disaster recovery Guide is.

    anyone can shed some light on this?  Very appreciated

    Dennis, your understanding is quite correct in this regard. IM & P needs to connect to the master DRF on the CUCM pub for the mechanism of the DRS only it doesn't have its own master DRF starting version 10.x when added as a subscriber to the cluster of CM.

    Infact, there was a known below defects for a problem in which IM & P will not appear while you take the backup of the Publisher CUCM DRS:

    https://Tools.Cisco.com/bugsearch/bug/CSCus64888/?reffering_site=dumpcr

    Concerning

    Deepak

  • Software Raid key for 2 hard drives

    -Does anyone know if a key of software raid is required for a raid HDD 2 1 or 0, in an on-board raid controller?

    Yes you have reason, what I meant is that by default the (onboard) raid software can supports raid 0,1 and 10, but you must meet the requirements of the hard drive.  For the c220 Server m3 you have not needed a key for raid 0 or raid 1, but you must make sure you are using SATA drives, if you use SAS disks, then you need the key.

  • LSI software RAID Configuration Utility Ver c.05

    Dear Nicolas,

    I need a help. I use software RAID. But when I give Windows 2008 R2, I did not find the driver of 20 c. Please help me who Relase of version of the software I need to download form cisco.

    https://software.Cisco.com/download/release.html?mdfid=284296254&flowid=...

    Please find this attachment

    Thank you

    Kafi

    Check first here: http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

    In this link, you will see the driver you need (according to your hardware/software/firmware). We just started to include a file .iso from the driver that tells you what version you will find in the file itself. Unfortunately, before the latest driver .iso we had only so you'll have to download them and whether the version you need is included there.

    HTH,

    -Kenny

  • Windows 7 (Ultimate, 64-bit) Software-Raid: possible after installation?

    Hello

    already have Windows 7 (and tons of other programms) installed. I currently plan to add another hard drive and enable Raid 0. The only thing that's keeping me currently is: I Don t want to go through a whole new installation.

    During the fist installation (upgrade from Vista), I also installed AHCI.

    (a) is it possible to activate a software raid without having to go through a whole new installation?
    (b) would it also possible to create and save an image of the current installation and then rewrite in the scratched disks?

    Any hint is appreciated.

    Thank you

    Michael

    There are two types of RAID arrays.
    (1) software RAID
    (2) hardware RAID

    Hardware RAID usually requires a smart controller on the motherboard, a gigabyte or JMicron chip.

    See:
    Installation of hardware RAID on Windows 7
    http://www.nikmakris.com/blog/post/installing-hardware-RAID-on-Windows-7.aspx

    Information on the Raid Windows 7 software:
    http://www.alanjlee.com/interesting-bits/a-few-notes-on-Windows-7-software-RAID/

    Nothing is absolutely foolproof, if the chip RAID controller failure, then two readers are probably currupt.

    If I had the choice, he would be RAID 5 or 50.
    http://en.Wikipedia.org/wiki/RAID

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Problem with different ASM disaster recovery start - new

    Hello together,

    I had an old net here about it but now will not solve the problem with the points in the old thread. Here's the old: https://community.oracle.com/thread/3608049?start=0 & tstart = 0

    I'm doing a disaster recovery with the 'apex11A' on a new server database, which has an another ASM starts. The old man starts is '+ DGA112_1' and '+ FRA112_1', newcomers are called '+ DATA_QUM169' and '+ FRA_QUM169 '. I changed the settings in the spfile restored by writing in a pfile file and creating the spfile from pfile.

    I tried in several ways. First lay the new ASM with RMAN to the course:

    run
{
SET NEWNAME FOR DATABASE TO '+DATA_QUM169';
restore database until LOGSEQ 24286;
switch datafile all;
switch tempfile all;
recover database until LOGSEQ 24286;
}

    Then I tried it in RMAN by defining the new ASM for each data file:

    run
{
SET NEWNAME FOR DATAFILE 1 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 2 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 3 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 4 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 5 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 6 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 7 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 8 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 9 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 10 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 11 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 12 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 13 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 14 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 15 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 16 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 17 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 18 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 19 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 20 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 21 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 22 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 23 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 24 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 25 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 26 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 27 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 28 TO '+DATA_QUM169';
restore database until LOGSEQ 24286;
switch datafile all;
switch tempfile all;
recover database until LOGSEQ 24286;
}

    Then I tried the bot in one:

    run
{
SET NEWNAME FOR DATABASE TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 1 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 2 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 3 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 4 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 5 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 6 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 7 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 8 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 9 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 10 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 11 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 12 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 13 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 14 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 15 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 16 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 17 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 18 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 19 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 20 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 21 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 22 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 23 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 24 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 25 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 26 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 27 TO '+DATA_QUM169';
SET NEWNAME FOR DATAFILE 28 TO '+DATA_QUM169';
restore database until LOGSEQ 24286;
switch datafile all;
switch tempfile all;
recover database until LOGSEQ 24286;
}

    Whenever I get one

    Starting restore at 03-FEB-16
using channel ORA_DISK_1


creating datafile file number=1 name=+DATA_QUM169
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 02/03/2016 16:20:41
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DGA112_1/apex11a/datafile/system.1423.788355253'

    The backuppiece which I bring are correctly defined with

    RMAN> catalog backuppiece '/usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1', '/usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1';


cataloged backup piece
backup piece handle=/usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1 RECID=3779 STAMP=902851052
cataloged backup piece
backup piece handle=/usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1 RECID=3780 STAMP=902851052


RMAN> list backup;




List of Backup Sets
===================




BS Key  Size       Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
3779    52.61M     DISK        00:00:00     03-FEB-16
        BP Key: 3779   Status: AVAILABLE  Compressed: YES  Tag: TAG20160203T145340
        Piece Name: /usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1


  List of Archived Logs in backup set 3779
  Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
  ---- ------- ---------- --------- ---------- ---------
  1    24285   11073415926066 03-FEB-16 11073416327345 03-FEB-16
  1    24286   11073416327345 03-FEB-16 11073416678326 03-FEB-16


BS Key  Type LV Size       Device Type Elapsed Time Completion Time
------- ---- -- ---------- ----------- ------------ ---------------
3780    Full    813.86M    DISK        00:00:00     03-FEB-16
        BP Key: 3780   Status: AVAILABLE  Compressed: YES  Tag: TAG20160203T145042
        Piece Name: /usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1
  List of Datafiles in backup set 3780
  File LV Type Ckp SCN    Ckp Time  Name
  ---- -- ---- ---------- --------- ----
  1       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/system.1423.788355253
  2       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/sysaux.1422.788355259
  3       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/undotbs1.1359.788355263
  4       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/users.1362.788355273
  5       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex4.1369.788356305
  6       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex4_files.1366.788356317
  7       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mms_archiv.1358.788357229
  8       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/planwerte.1357.788357243
  9       Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/btdb_prod.1352.788456613
  10      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais.1353.788456763
  11      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mms.1354.788456995
  12      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/externe_wirk.1355.788457525
  13      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais2mt.1356.788458151
  14      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/btdb_read.1351.788458291
  15      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329
  16      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657
  17      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/macmon.1340.788458691
  18      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais_read.1339.788458725
  19      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais2srm.266.788458799
  20      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859
  21      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/quickcheck.1338.788458887
  22      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/switch.1337.788459139
  23      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/veit_r.1333.788459167
  24      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/test-btdb.1298.795097725
  25      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex11dev.986.874230931
  26      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex11devbt.985.874230963
  27      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hrbew.1083.851007823
  28      Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/optimadata.1032.865951029

    I also tried to put the new ASM SQL:

    SQL*Plus: Release 11.2.0.4.0 Production on Wed Feb 3 16:04:05 2016


Copyright (c) 1982, 2013, Oracle.  All rights reserved.




Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, Automatic Storage Management and OLAP options


SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/system.1423.788355253' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/users.1362.788355273' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4.1369.788356305' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/system.1423.788355253' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 1 - new file '+DATA_QUM169' not found
ORA-01110: data file 1: '+DGA112_1/apex11a/datafile/system.1423.788355253'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 2 - new file '+DATA_QUM169' not found
ORA-01110: data file 2: '+DGA112_1/apex11a/datafile/sysaux.1422.788355259'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 3 - new file '+DATA_QUM169' not found
ORA-01110: data file 3: '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/users.1362.788355273' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 4 - new file '+DATA_QUM169' not found
ORA-01110: data file 4: '+DGA112_1/apex11a/datafile/users.1362.788355273'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4.1369.788356305' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 5 - new file '+DATA_QUM169' not found
ORA-01110: data file 5: '+DGA112_1/apex11a/datafile/apex4.1369.788356305'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 6 - new file '+DATA_QUM169' not found
ORA-01110: data file 6: '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 7 - new file '+DATA_QUM169' not found
ORA-01110: data file 7: '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 8 - new file '+DATA_QUM169' not found
ORA-01110: data file 8: '+DGA112_1/apex11a/datafile/planwerte.1357.788357243'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 9 - new file '+DATA_QUM169' not found
ORA-01110: data file 9: '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais.1353.788456763' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais.1353.788456763' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 10 - new file '+DATA_QUM169' not found
ORA-01110: data file 10: '+DGA112_1/apex11a/datafile/mais.1353.788456763'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms.1354.788456995' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms.1354.788456995' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 11 - new file '+DATA_QUM169' not found
ORA-01110: data file 11: '+DGA112_1/apex11a/datafile/mms.1354.788456995'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 12 - new file '+DATA_QUM169' not found
ORA-01110: data file 12:
'+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 13 - new file '+DATA_QUM169' not found
ORA-01110: data file 13: '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 14 - new file '+DATA_QUM169' not found
ORA-01110: data file 14: '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 15 - new file '+DATA_QUM169' not found
ORA-01110: data file 15: '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 16 - new file '+DATA_QUM169' not found
ORA-01110: data file 16: '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/macmon.1340.788458691' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/macmon.1340.788458691' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 17 - new file '+DATA_QUM169' not found
ORA-01110: data file 17: '+DGA112_1/apex11a/datafile/macmon.1340.788458691'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 18 - new file '+DATA_QUM169' not found
ORA-01110: data file 18: '+DGA112_1/apex11a/datafile/mais_read.1339.788458725'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 19 - new file '+DATA_QUM169' not found
ORA-01110: data file 19: '+DGA112_1/apex11a/datafile/mais2srm.266.788458799'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 20 - new file '+DATA_QUM169' not found
ORA-01110: data file 20:
'+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 21 - new file '+DATA_QUM169' not found
ORA-01110: data file 21: '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/switch.1337.788459139' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/switch.1337.788459139' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 22 - new file '+DATA_QUM169' not found
ORA-01110: data file 22: '+DGA112_1/apex11a/datafile/switch.1337.788459139'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 23 - new file '+DATA_QUM169' not found
ORA-01110: data file 23: '+DGA112_1/apex11a/datafile/veit_r.1333.788459167'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 24 - new file '+DATA_QUM169' not found
ORA-01110: data file 24: '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 25 - new file '+DATA_QUM169' not found
ORA-01110: data file 25: '+DGA112_1/apex11a/datafile/apex11dev.986.874230931'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 26 - new file '+DATA_QUM169' not found
ORA-01110: data file 26: '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 27 - new file '+DATA_QUM169' not found
ORA-01110: data file 27: '+DGA112_1/apex11a/datafile/hrbew.1083.851007823'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form




SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' TO '+DATA_QUM169';
ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' TO '+DATA_QUM169'
*
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01141: error renaming data file 28 - new file '+DATA_QUM169' not found
ORA-01110: data file 28: '+DGA112_1/apex11a/datafile/optimadata.1032.865951029'
ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169
ORA-15045: ASM file name '+DATA_QUM169' is not in reference form

    But my new database will not set the new ASM and I have no why.

    The db_create_file_dest parameter is set correctly, so I think that:

    NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
db_create_file_dest                  string      +DATA_QUM169

    I forgot something? Would be nice to get help ...

    A big thank you and best regards,

    David

    Your data checkpoint SCN file are in the LOW and HIGH range of the SNA for SEQUENCE 24286.

    Therefore, your UNTIL clause should be 24287 SEQUENCE up to THAT.

    Hemant K Collette

  • OBIEE Disaster Recovery can be configured without CARS and shared storage?

    Hi people,

    As say the topic, I'm looking for advice on disaster recovery. What I find in the docs pointing me to the high availability configuration, or maybe I'm simply not find the docs I'm looking for. And it always points to the RAC, etc. of shared storage. My database is already configured to Dataguard and I want to do things this way, with a recovery site which isn't always upwards and a part of a cluster (although it's very well as long as the CAR is not involved), I'm looking for some feedback on how people do things. I have 11.1 now, but will be upgrading to 12.2 soon.  Just a straight stitch to the documentation would be useful if I'm missing just that.

    Thank you

    -Adam

    Since you have already configured Dataguard and in a DR situation, you will be switching/switch on your course in standby mode and it will active db. All this is fine. You can do the same with instances of weblogic OBIEE. You can clone your binaries installed using tools provided by Oracle cloning, or build binaries from weblogic with the accurate determination of drive on your Dr. use the pack of weblogic server and then unzip tool to archive your entire weblogic domain and it Unarchive in your prepared DR server.

    Now, you have to just challenge the hostname (s) of your domain to point to your database JDBC data sources and weblogic.

    To facilitate the task, you can change the host name used by weblogic to host alias that can be remapped in DNS during DR. Similarly, you can change the JDBC connection string so that it can automatically select the active database as long as you use a database instead of a SID service name in the connection string.

    You will need to regularly make a pack on your weblogic domain in order to maintain an up-to-date backup of your domain proximity. Similarly, if you have reports that are stored on the file system, they must also be backed up regularly so that they can be restored.

  • Difference between disaster recovery (replace the user's machine) and material migration Assistant.

    Hi all

    I worked at different scenarios for customers supported the migration of material.

    I found "Disaster recovery (replace the user's machine)" will perform the same action as the 'migration Hardware' option Assistant in common.

    Please let me know if the two are same with operations or any difference is there?

    Essentially, they do the same for the different use cases. The only difference is the default option selected for the computer name in the wizard. Migration of HW, it is 'Set Name'. In the Assistant of Dr., is "to keep the name of CVD.

Maybe you are looking for

  • Scuba diving between 0 and 50 m with Watch series 2

    Public documents for diving with Apple Watch series 2 is a bit contradictory. All the data I can find claims that it is resistant to 50 m, but you shouldn't use it for scuba diving. Note 1 to the foot of the http://www.apple.com/apple-watch-series-2/

  • Beginner question absolute to the Labview with GPIB connection device

    Hi all Firstly, sorry if my question is already posted, but I tried searching with nothing doesn't. My situation: I have a HP digital osciloscope, a HP 54602 B using the GPIB and trial version of labview 8.6. Now, I want to communicate with her from

  • Search for toner iron oxide content

    Can someone tell me where I can find the toner iron oxide content?  I am doing a project which requires it, but before I spend money on special paper there too, I want to know that my printer is able to handle this.  I need about 60% iron oxide.  I c

  • 559 http error when trying to add CUCM 11 to Expressway

    Hello I have a BE6000 running and improved a few weeks of CUCM 10.5.2 to 11.01 and the highway has not been rebootet after this migration and worked very well. Now, I had to reload the whole BE6000 and now I have the problem of this highway seems to

  • ScanJet G3110: Scanjet G3110 turns is not on

    It was a gift.  I have not used.  It not turn on if the computer does not recognize it.  I plugged directly into a wall outlet, and it won't always turn.  I don't know if the power cord is the problem, if the power button is the problem.  All I know