Disorder of ActiveSync

Similar Questions

• WiFi fell on the Qosmio when you run ActiveSync

  I installed ActiveSync 4.0 and you have connected my pda (windows mobile 5) via the USB cable from the pda synchronization. Sync works fine, but it creates another network connection causing my built in wifi to drop its connection to the netgear router and I can only find this connection if I disconnect the pda and restart the computer. I tried to give different results 'metric' to the two network connections, but it makes no difference. Please if anyone can help it would be much appreciated.

  Hi admisi

  This question is very strange. I have a Satellite P20 and my e800 is also connected via the USB cable, but I don't really have that kind of problems. The wireless connection to my router is configured on both units and I can use both at the same time (in this case usually remove the PDA in the cradle).

  If I understand you right, you use just a WLAN. You have the same problem if you delete PDA from the cradle?

• Connection Wi - FI is removed when ActiveSync 4.0 runs via USB

  I installed ActiveSync 4.0 and you have connected my PDA (windows mobile 5) via the USB cable from the PDA synchronization. Sync works fine, but it creates another network connection causing the wifi connection to my router and I can only find this connection if I disconnect the PDA and restart the computer.

  I tried to give different results 'metric' to the two network connections, but it makes no difference.
  Please if anyone can help it would be much appreciated.

  Hello

  Please check if you have installed the latest driver. If Intel BG2200 wireless card in your laptop, there is a problem connecting with older drivers. The new we could solve your problem too (new driver Version: V9.0.2.31).

  BR, Ben

• Connect my PDA (WM6.1) to my laptop for activesync

  I use the HTC Touch Diamond2 and tries to connect to the PC using Vista + Windows Mobile Device Center

  I have try the parameter listed in the next page then, but when I'm doing
  "Now the remote PC is questioned if ActiveSync is running on it. If everything works well, you will get at least 'ActiveSync' as service remotely. Select it and click on "Finish". »
  I couldn't find the 'ActiveSync' as service remotely, even I put the com port than 7 in the center of the Mobile device
  http://APS2.toshiba-tro.de/KB0/HTD9602MY0000R01.htm

  I use Vista SP2 + Bluetooth Stack for Windows 5.10.17 (F) given by my laptop Fujitsu.

  I wonder why I can't find the remote 'ActiveSync' service after peeling upward with my laptop.

  Could someone help?

  Your Bluetooth stack version is quite old. Try to update if Fujitsu offers a newer version to support features such as selective suspend. Maybe that's the problem here. If you can't get a more recent version, then I would try to install the version that is available on the Toshiba site:
  http://APS2.toshiba-tro.de/Bluetooth/?page=download
  Try to set up this new. If it worked then uninstall the battery Bluetooth again, but keep the settings. The uninstall wizard asks. Now reinstall your original version of 5.10.17 (F). The version is old, once again, but I guess that most recent drivers remain in the system.

• Smartphone cannot find the 'BT ActiveSync' service

  I use the new BT stack v5.10.17 (F), my smartphone (HTC Diamond 2 with WM6.1) could not find service 'BT ActiveSync' on my laptop.
  It cannot find "Serial Port".

  Here is my equipment.
  Laptop: Fujitsu P8010
  OS: Windows Vista Home Basic
  Smartphone: HTC Diamond 2
  Bluetooth stack: v5.10.17 (F)
  ActiveSync: Windows Mobile Device Center 6.0

  I already try set the connection parameters in the center of the mobile device to COM7, but when you connect the phone to the PC it still shows only Serial Port.

  See the following Web site:
  http://APS2.toshiba-tro.de/KB0/HTD9602MY0000R01.htm

• Cannot create e800 19.ne Activesync for Vista

  Hi all!

  I have a problem: when I search my pc (no computer toshiba laptop but with toshiba BT) I found only the MOULD as the available record. In the Panel of bluetooth settings of vista I have 2 coms configured (one for the outgoing and one for entrants), but I can't find them on my e800. So I can't create a connection between the two Bluetooth activesync.

  Any ideas?

  Thank you for your help.
  Fabio

  Hello Fabio

  Just a question: Activesync is compatible with Vista?

• The ActiveSync connection with PAN configuration failure

  Hello world
  I have a windows mobile 6 smartphone (Samsung Sgh i-780). It is coupled to my PC (win 7 race) as PAN via bluetooth and it works fine. I have set up connection for ActiveSync using the selection "com7" as described on this Web site. I've matched PC and mobileusing 'add new hardware '. The PC is recognized with a port 'ActiveSync', but when I want to "connect Bluetooth" bluetooth (Menu in Activesync on mobile) partnership, is not recognized. Control to the list of partnership confirms that the PC is always OK!
  What I don't understand, is that everything looks ok, when mobile was not already associated with the PC as a device of the PAN. Very strange.
  Does anyone have the solution or advice to solve my problem. It's a shame not to be able to use all available facilities provide a Smartphone.
  I got to mention that the problem occur while PAN connection is not in use (PC not connected through PAN and mobile not connected to the internet).

  Thank you, best regards,.
  Yann

  Can you please tell me why this question on the forum of Toshiba?
  You have the desktop or laptop computer?
  Who is the manufacturer of PC and BT material?

  Whenever you write on ActiveSync. It is unclear to me that this product has nothing with Toshiba. Please don t get me wrong, but I'm a bit confused of m.

  On my Toshiba laptop, I have the BT module and use it with preinstalled Toshiba BT stack. From time to time I use connection BT for photo transfer from my mobile phone to the laptop but you have no ActiveSync software.

• ActiveSync does not-how use bluetooth Windows driver?

  Well, I almost gave up on trying to get the Toshiba Bluetooth stack to work with my QTek PDAphone. The reason is that the stack does not correctly list all the functions of the unit and that is why I can not configure the activesync program uses the correct com port.

  Frankly, I'm disappointed that Toshiba has chosen to ship their own implementation of bluetooth special for Windows when Windows has its own.

  The question I have is, is it a "correct way" completely remove the supplied bluetooth Toshiba stack (without using the Ghost image before installing it, I did) and get a good Windows bluetooth driver?

  Regarding the security of bluetooth, the only security I saw using the Toshiba stack, is that you can actually make works with anything so you're not at additional risk.

  P.S. I tested with other devices bluetooth WindowsCE, same problem.

  Hello

  I put t understand why you don't like to use n battery Toshiba Bluetooth. I use this future with my cell phone and other applications and it works correctly.
  But if you want to remove it, so I recommend to do so under the option to add and remove programs
  There you should find the Toshiba Bluetooth stack and there ca remove you.

  Good bye

• Cannot match Smartphone with Satellite A100 for ActiveSync

  Hi, on board.

  I can't use ActiveSync to sync my phone with the laptop; It seems that the twinning of 2 devices fails.
  With USB connection I can ActiveSync successfully.

  My devices are:
  * Toshiba Satellite A100 (PSAA9) with ActiveSync 4.2 and Toshiba Bluetooth Stack 4.20.01
  * HTC MTeor with Windows Mobile 5.0 SmartPhone

  I tried to follow the HowTo in:
  http://APS.toshiba-tro.de/Bluetooth/

  How-> ActiveSync via Bluetooth (TOSHIBA PC - smartphone with Windows Mobile 5)

  I find cela the opportunity to say that it is wrong that the HowTo is not in the English language.

  In any case, I followed him through until page 8, 18 statement, where the third picture shows the box in ActiveSync checked; my phone doesn't have this box: it has "Serial Port".
  I check "Serial Port" (also tried not to check...) and continue until the 21 statement. Well, it stops there; I don't understand that messagebox; in fact nothing happens, not in the laptop or the phone and they don't get matched.

  Found here a recent thread, asserting the need to define COM7 in the registry. I did it. Oddly enough, COM7 is not my LoalCOM server, but a customer LocalCOM; COM8 is the LocalCOM server.
  I tried also with COM8.

  I tried to remove Bluetooth Stack completely and reinstall (embedded version and latest version).
  I reinstall ActiveSync 4.2.
  I also tried with ActiveSync 4.5 BETA.

  Nothing worked for me.
  Help, please.

  Note: I have activesynced the same phone via bluetooth successfully with a HP laptop which has its own bluetooth software with, I think, virtual serial port driver of widdcomm.

  Thank you.

  Hello

  This Smartphone is not known to me, but I really put t know why you try to use BT between MTeor and laptop when connecting USB works. Using this connection, you can do whatever you want.

  BT on Smartphone is useful if you want to connect the small BT headset, but I don't see the reason to try this when the USB connection is working successfully.

  If there is no success I put t think it is Toshiba related question and also try to contact HTC support. They know more about the own products.

  http://www.Europe.HTC.com/support/support.HTML?device=htcmteor

  Good luck!

• After BT stack installation smartphone does not find 'BT ActiveSync' service

  After that I updated the new BT 4.20.1, my smartphone stack not found service 'BT ActiveSync' on my laptop.
  It cannot find "Serial Port".

  Here is my equipment.
  Laptop: Portege R100
  OS: Windows XP Professional.
  Smartphone: Dodpod S300
  Battery Bluetooth: 4.20.1
  Bluetooth SD IO: Toshiba Bluetooth SD Card3
  ActiveSync: 4.2

  Hello

  This is a problem that is typical If ActiveSync on the side of the PC is not running or not configured to COM7.
  The PDA - side BT Serial Port of the laptop will be detected as a Port of BT ActiveSync If ActiveSync is running and configured on the side PC.

  Explanation:
  The PDA will send the 'CUSTOMER' command on the serial port remote and if the response "CLIENTSERVER", the serial port will be detected as a sync Active BT Port

  The following registry key will assign COM7 Sync-port for the side AS PC:
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
  "COM7 SerialPort"=""

  Please make sure that the BT from TOSHIBA stack is installed correctly. [START]-[Control Panel]-[Bluetooth Local COM], check if COM7 is designated as "LocalCOM Server".

  CU
  DM

• ICLOUD photo are disordered and do not display titles

  I organized a PHOTO album to reorganize the order of a few photos (no time) and added a few titles.  Once I shared the album to the ICLOUD to share photos are disordered and do not present one of the titles.  Is there a way to fix this?

  Shared albums do not show the titles of the photos.

  The photos appear in the shared album in the order that add you them to the album.  If you want your photos to appear in a specific order, download individually one by one and add a comment to each photo, when download you the shared album.

• ActiveSync via Bluetooth: no available ActiveSync profile

  I have an another laptop computer manufacturers under XP Pro with a stack of Toshiba BT (v.4.31.02 (D)) and a Toshiba BT mini-PCI card (though renamed as Wireless 360 Bluetooth Module).

  I would like to be able to synchronize my PDA (a T-Mobile MDA Vario2 running Windows Mobile 5) to your PC via ActiveSync (I have installed v.4.5) but I suck. Most is that when I set up the partnership between the PDA and the PC, only profiles I see are wireless stereo and the Serial Port.

  The ActiveSync profile is not displayed. I read the document how to make here and the help in the actual stack file, but any COM port I select, via the Bluetooth COM Local application and the ActiveSync connection settings dialog, I can't always this ActiveSync profile to appear.

  Any help and advice gratefully received.

  Martin.

  Hello

  According to your message, I presume that you have already checked the help documents which can be found here:
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO

  To be honest, I never connected your device to a PC, but another Pocket PC.
  Usually, you go to the Pocket PC BT settings and there you have to select Tools-> search for the device.
  Then tab hold ActiveSyncPC and select Update service.

  Then you should see the name of the service. There, you have to tab and hold the 7 COM and select ActiveSync for registration. Then, you can enter any login name and then tab OK. Now, you can configure some settings of ActiveSync. If you don t have an existing partnership, you should uncheck Auto Connect ActiveSync and tab on OK

  Perhaps this little education could help a little.

• V06.10.07.2 (T) Toshiba BT Stack with ActiveSync 4.5 on Windows Mobile 6

  Hello

  I've looked everywhere for the v06.10.07.2 (T) of Toshiba BT Stack with ActiveSync 4.5 on the functioning of Windows Mobile 6. I still didn't find any solution.

  Everything that I found is a tutorial from this site, how to get a Toshiba pc synchronized with active sync 4.2 on a windows mobile 5! Not really useful:)
  As you can see, it differs much, ActiveSync 4.2 to 4.5 and windows mobile 5 or 6

  If there is no tutorial recommend if it still runs on a windows mobile device, that would be a thread of reference for all customers with the same problem, since windows mobile 6 is standard (and soon WinMo 7 version 2009).

  I m having a htc touch cruise Pocket PC with windows mobile 6 and the new Toshiba Bluetooth stack on my pc (win xp sp2 + sp3) installed > v06.10.07.2 (T) Toshiba BT Stack with active sync 4.5.

  Thank you all in advance!
  DAE

  Installation is pretty easy.

  Laptop:
  Set the COM port appropriate in Active Sync that adapts to your COM Server Bluetooth port. It is normally COM7.

  PDA with Windows Mobile 6:
  Ensure COM Bluetooth Manager is on.
  Configure the port on the laptop with Active Sync:
  Start->settings->connections->Bluetooth->devices->add new feature-> select your laptop-> port select "Active Sync"...

• Satellite A660 - multimedia keys are disordered

  Hi and sorry for my English

  I have a Satellite A660 - 12th and recently after reinstalling windows and all the other drivers (VAP, HW, etc.), multimedia keys, are disordered, so the wireless open windows media, the Toshiba shorcut edge player on/off button on/off switch in the light of the buttons and the touchpad, switch off power switch the touchpad button and light button does nothing , volume +/-works very well. I try to reinstall the driver of the VAP, pilot HW and Flash driver cards and that do not resolve the problem, I also try to reinstall windows, still nothing.
  If anyone can help me, save me, I can not turn on the Recent very frustrating wireless
  Thank you

  > I used Windows 7 Ultimate (no problems with it before)...
  It's logical, because previously you used laptop with factory settings and proper installation.
  Now, you use installation clean to the BONE and who knows how you installed all of the extra stuff.

  In any case the question confuses me, in any case. I can understand that some buttons don t work due to lack of tools but I ve never seen that buttons behave messy. Which is really strange.

  If you have the time and if you want to reinstall Win7 once again, we will send you the right installation order and you should try again.
  What do you think about this?

• Xoom does support ActiveSync and ESP?

  I'm assuming that the Xoom will support ActiveSync for manual users said that it syncs with Exchange 2007, however, anyoen knows if she supports the ESP? It is a requirement of my corporate security policy.

  I wouldn't think that immediately.

  the last phone motorcycle all use motoblur to crochet for exchange active sync. MOTOBLUR has additional security features that Vanilla android 2.x does NOT.

  So unless google has put several security 3.x vanilla EAS features it may or may not work-function server settings (for example what security policies the organization applies).

  Some exchange servers are large open and will pretty much do anything to connect. Others are more like fort knox and require the device to be able to do all sorts of things.

  Touchdown are available in the market - and I guess that it works on the xoom. It is a REPLACEMENT for the EAS built in support which has some of the additional security features THAT may require an exchange server.