Connection Wi - FI is removed when ActiveSync 4.0 runs via USB

Similar Questions

• RN104 freezes when you make significant transfers via USB 3.0 on 6.4.0

  My RN10400 works great since the purchase. However, I have never transferred via USB abundantly; all data have been loaded on the network. Now I have a lot of folders on a drive HARD USB 3.0 that I try to move to the NAS. When I try to copy on it will start at full speed and stays there for about five minutes. It seems then to have overloaded and from 100% to frozen in a fraction of a second. No no warning, no error, just insensitive and frozen. I tried the copy three times with the same result, and I have to remove the power to remit on the. There are no applications installed or running. 6.4.0 ordinary. Whenever I have pull the plug I need to Resync quickly the data on the volume, while this process is getting old.

  Any suggestions?

  Update: I've upgraded to 6.4.1RC and I still have the same question. A pull the plug to get back on the new =)

  Hello, @Learning2NAS

  In my case (erratic freezezs when writing large files on the disk).

  An upgrade to 6.4.1 RC1 + Factory reset (AKA factory reset under 6.4.1) solved the problem.

  As a test I did went back to 6.4.1 to 6.4.0 stable (what joke ;-)) and it froze again immediately.)

  If you're up to wipe your NAS, try a factroy restore 6.4.1 before attempting to downgrade.

  Please post the result of this, it would help many other contributors

• Change the drive letter when connecting via USB?

  When I plugged my DroidX (via USB) to my box "XP home", I don't have my 2 USB powered external drive enclosures. Thusly, Motohelper installed and configured itself, but took possession of the letters 'F' and 'G' driver previously used by my two external in the process.

  I need to get those back from some apps are looking for files in these places and I would rather not start reconfiguring all my apps on my XP machine.

  I looked in disk management, but don't see not all references to F or G, a frontend for the Motorola drivers for this problem.

  Someone knows a way to recover my drive letters and to reconfigure the drive letters of Motorola to my taste? (System Restore is out...)

  How to change a drive letter

  To change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start, click Control Panel, and then click performance and Maintenance.
  3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
  5. Click change.
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK.
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  How to remove a drive letter

  To remove an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start, click Control Panel, and then click performance and Maintenance.
  3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
  5. Click Remove.
  6. Click Yes when you are prompted to confirm the deletion.

  The drive letter is removed the disk, the partition or volume that you specified.

• My MacBook is not connect to my Time Capsule to back up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.  Help

  My MacBook Pro is not connect to my Time Capsule so it backs up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.

  The problem started when I upgraded to Yosemite, sometimes back.  I am running 10.10.5.

  The MacBook Pro...

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click Add or remove from your drive

  Under the heading of backup disks, click on the drive it to highlight (probably named 'Data', unless you have changed the name of the drive)

  Click remove disk

  Close the windows

  Restart the MacBook Pro

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click select drive or Add or remove disks

  Choose the Time Capsule drive (probably named 'Data') by highlighting

  Click use the disk

  Close the windows

  Wait a while to see if a backup is performed

  If you want to manually run the backup, click on the Time Machine clock icon, and then click Backup now

  Report on your results. If the backup still does not work, we need the exact message that you see there.

• I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  MacBook Air, OS X El Capitan

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• Cannot connect to internet after removing a virus

  Can't connect to internet after removing a virus. Said in the currency manager there is a problem with the ethernet controller and can not find a driver when he found new hardware. Dell optiplex 260 - win xp - IE8

  Hi PamJones. Check if the network in Internet Explorer settings are configured to connect to a Proxy Server and remove the option if there is. To do this:

  1. Launch Internet Explorer (ignore the subject text unable to browse the internet).
  2. Click Tools > choose 'Internet Options '.
  3. Click the Connections tab.
  4. Click the "network settings".
  5. Make sure there's a check mark on the button "automatically detect settings".
  6. REMOVE THE check MARK from the option "use a Proxy Server for your network local (these settings will not apply to the VPN connection or access remotely).»
  7. Click OK to close the LAN settings window.
  8. Click OK to close the Internet Options window.
  9. Close Internet Explorer.
  10. Restart Internet Explorer.

  You are now able to browse websites?

• BlackBerry Smartphones Blackberry Media Sync continues to display 'Please connect a Blackberry smart phone' when the Blackberry Storm is connected to the PC

  About a 2 months ago when I would like to connect my (the first storm) blackberry storm to my computer via the USB cable supplied with the phone, I was able to transfer music from my computer (itunes) to the blackberry via Blackberry Media Sync with no problems (open Blackberry Media Sync, connect blackberry to the computer via the USB port and screen Media Sync would change so that I could sync to the blackberry storm music). I didn't even have to install Blackberry Media Sync in December 2009

  But now after I connect my Blackberry Storm to my computer, the screen of Blackberry Media Sync does not change and continues to display "please connect a Blackberry smartphone. I tried these tips I found online:

  1.) several reboots my computer (windows vista)

  2.) update/reinstall Blackberry Media Sync, then by restarting my computer

  3.) reconnection from blackberry to the computer, then open Media Sync

  4.) Open Media Sync first and then connect the blackberry to the computer.

  5.) installation BlackBerry USB and Modem drivers (even if I can't find the USB driver for it under the Universal Serial Bus Controller when I check in the Device Manager when you go to control panel – system and Maintenance – Manager of devices, but I found a v2 COM4 and COM5 RIM virtual serial Port when you select "devices by connection" under display in Device Manager) or are RIM Serial Port virtual v2 COM4 and COM5 drivers I'm looking for?

  6.) go to Options (on blackberry) - memory and make sure Media Card Support, Media Transfer Protocol (MTO) and Mass Storage Mode Support are resolved on 'On', the encryption Mode is set to 'None' and mass storage Mode Auto activate when connected, it the value "Prompt" although I tried to 'Yes' as well. It says I have 785 MB of memory space of the unit out of 879 MB total memory of the device and 7.1 GB of free space on a total of 7.3 GB of Media Card Media Card.

  None of the above tips and troubleshooting tips worked. I also checked the Blackberry technical solution center but I've not found anything there that has contributed to the other. I found discussions forums online, including issues of people with 'blackberry media sync cannot connect to the device' pop up, but I have not had this pop-up. The Media Sync screen remains just the same as if I never connected the blackberry storm to my computer in the first place even if my blackberry storm recharges via the computer.

  Is there something that I miss or have not yet done? What should I do?

  Too bad. I went to a Verizon store and they me remove the battery and turn the blackberry. Worked like a charm and I can now use Media Sync.

  Also told me that I need to update the software of the phone blackberry using Blackberry Desktop software (I have version 4 and need to update to 5) and make sure to choose to back up files when you are prompted during the update or you will lose all files, the media and info saved on blackberry.

• Cannot connect every android device on my Windows 8 machine via USB. Worked fine when I got Windows 7.

  Since my upgrade, I can access is no longer my Nexus 7 Tablet nor my EVO 4 G LTE phone on my computer via a USB cable. I searched the Internet far from help. So far, it seems that no one can connect via USB. Thanks a bunch of Microsoft.

  Hi DanWilson,
   
  Thanks for the post about Microsoft Community.
   
  It seems that you are not able to connect any devices android on your computer with Windows 8.
   
  I would like to collect some of you before we head to the troubleshooting steps.
   
  (1) are you getting any error message or error code when connecting android devices?
  (2) are your other devices Universal Serial Bus works well?
   
  I would ask you to please follow the troubleshooting methods listed below:
   
  Method 1: Run the hardware troubleshooting tool. Follow these steps:
  
   
  a. press the Windows key + W key on the keyboard.
  b. type Troubleshooting in the search box, and then press ENTER.
  c. click on hardware and sound.
  d. click Next to run and follow the steps to perform this troubleshooting.
   
  Method 2: Try to connect to another Universal Serial Bus port and check if it helps.
   
  Method 3:
   
  Uninstall and reinstall the USB controllers. Follow these steps:
  
   
  a. press Windows + R keyboard key.
  b. type devmgmt.msc , and then press ENTER.
  c. expand Bus USB controllers.
  d. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  e. restart the computer and reinstall the USB controllers.
   
  
  I recommend you to download and install the latest driver from the manufacturing site.
  
   
  Please go through the following links as reference:
  
   
  Install USB 3.0 and other USB devices:
   
  http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devices
   
  Why Windows is not find my device?
   
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device
   
  Why Windows is not find my device?
   
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device
  Please write back to us if the problem persists.

• My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

  My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

  I'm surprised to hear that for an iPad 2 that the issue had apparently been set for 2 s. Please see this for more details as I know them. Maybe the servers at your site have not been updated yet for the new version of the iPad 2.  ???

  Apple released the update iOS 9.3 for older devices (air of iPad and previous iPhone, 5 s and previous) due to problems with Activation. See the following for details and possible solutions.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  https://support.Apple.com/en-us/HT206203

  A new version for the iPad 2 is now available which does not require the activation step. A new version for other devices is not yet available.

• I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player

  Hi I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player.

  HI Maria,

  If you are using Vista, go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to EXE and click or double-click it to run the program to restore EXE file associations.  Once done, do the same for LNK entry.  This should restore your programs and get the Internet icon to go to the internet rather than WMP.  If you use Windows 7, go to http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html. If you are using XP, go to http://www.dougknox.com/xp/file_assoc.htm.

  If this does not work and it started recently, try a system restore to a restore point BEFORE the problem started.  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.  If the first attempt fails, try an earlier point or two because the problem may have started before you noticed.

  I hope this helps.

  Good luck!

• How the 'registration' identity can be removed when a computer prepares for recycling?

  How the 'registration' identity can be removed when a computer prepares for recycling?  I'll give my old PC for a facility that reconditions them.  I removed almost everything that could lead to my identity used but I've not found a way to change or remove the name that the software is registered.   Any ideas?   Also how hard disk would be restructured uning windows home?

  Boot from your WIndows installation CD-ROM.  You will be able to erase the hard drive from there.

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• network drive mapped 2003 server need stay connected after journal so that when my script is scheduled to run the player will always be mapped.

  2003 network drive server need mapped stay connected after journal so that when my script is scheduled to run the player will always map. ??

  Hello Scott,

  This is not the right forum for issues with Windows Server 2003.
  Please click the link below to ask your question in the appropriate forum TechNet.
  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

  Thank you

  Marilyn

• In total, I connect app... When I try to open the camera with quick time just, it is there and goes to white screen

  In total, I connect app... When I try to open the camera with quick time just, it is there and goes to white screen

  Hello

  You can check the link, download the manual to link Total perform operations.
  http://www.centralillinoissecurity.com/resources/documents/TC1.PDF
  You can also check out the Apple support link and view the query.
  http://www.Apple.com/support/QuickTime/