display driver failure error message

Similar Questions

• laptop hard drive failure error 301 on my device

  a few descryption

  . device name - hp pavilion g61200 do you

  . the problem in the hard disk it displays SMART drive failure error (301)

  HP PAVILION DO YOU G61200 & O/S WINDOWS 7 ULTIMATE

  I want to know, what is the ERROR DISK HARD SMART 301

  with in a few days I am facing this problem in my device

  so, what can I do for this problem...

  Please tell me

  Hello

  Do a hard reset first.
  http://support.HP.com/us-en/document/c01684768

  The SMART drive test produces a prediction on the risk of hard drive failure, not a real failure.

  A warning to SMART disk error can appear for various reasons such as having been jarred abruptly computer or hard drive, be subject to the higher than usual temperature.

  Perform HP hard drive - wide test of the system BIOS Diagnostics shortly after switching on, tapping F10/F2

  If there are any Smart player or hard failure error you see, Hard Drive is a failure and the solution is to replace the drive.

  It would also be very wise to make sure that you back up all your files etc as soon as possible.

  Thank you

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

  Hello!
  The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
  Sincerely, Vsevolod.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly
  • http://KB.mozillazine.org/cookies

• having video display problems - C000D11DA error message - how to fix

  having video display problems - C000D11DA error message - how to fix

  Hello RobertHollman,

  -You try to play the media file online or the file that is saved on your computer?

  -What version of Media Player do you use?

  This problem occurs if the management of digital rights (DRM) system is damaged on your computer.

  Follow the steps listed in the article below to solve the problem:

  Error message when you use Windows Media Player 10 to play multimedia files online: "C00D11DA - Windows Media Player cannot play, synchronize, or burn a protected file because an error occurred when checking the license."

  Thank you!

• I get BSOD on windows 8 and the STATE DRIVER FAILURE error. What should I do?

  I get BSOD on windows 8 and the STATE DRIVER FAILURE error. Never, it happens every time I got close the lid of my portable computer or attempt to put it to sleep. If it helps I have an ASUS S56C ultrabook. I have read other forums and noticed that this problem is related to my minidump file. The link is https://skydrive.live.com/redir?resid=B33EC443BFC08CAF! 239 & authkey =! APosKb0gDrCL_7M. Thanks to all those who can help you

  Hello

  Since there is a new check laptop with the seller and ASUStek support for warranty
  repair. As OEM ASUStek is responsible for the good operation of the equipment both
  and Windows. Keep in mind do you more they tell you it's something
  you did it. Added that even if you are somehow able to solve the problem you
  would that he documented in the case of other problems on the road.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  =======================================================

  If you really want to solve the problem (which I do not recommend on a new computer
  under warranty):

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has been iaStorA.sys 9F CAUSE i.e. technology Intel Rapid Storage Technology driver.

  9F error checking, {3, fffffa80121cf7f0, fffff800af4687e0, fffffa8013b01c60}

  Probably caused by: iaStorA.sys
  FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  iaStorA.sys as of the 09/07/2012 which is Intel Rapid Storage Technology driver.

  fffff880 ' 01638000 fffff880' 01902000 iaStorA T (no symbol)
  Loaded symbol image file: iaStorA.sys
  Image path: \SystemRoot\System32\drivers\iaStorA.sys
  Image name: iaStorA.sys
  Timestamp: Wed Jul 09 13:42:33 2012 (4FFB4239)

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems.

  BiosVersion = K56CA.206
  BiosReleaseDate = 21/08/2012<- bios="" is="" fairly="" current="" however="" there="" may="" be="" an="">
  most recent version. Also check updates the chipset drivers and other key embedded
  and separate device drivers.
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = K56CA
  Family = K
  SystemVersion = 1.0
  SystemSKU = ASUS-NotebookSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = K56CA
  BaseBoardVersion = 1.0

  ASUStek links above.

  After checking with ASUStek and if necessary to check updates with Intel.

  For the Intel driver update utility<-- run="" this="" after="" checking="" with="">
  http://www.Intel.com/p/en_US/support/detect?redirector_count=1&

  Intel - <- also="" search="" here="" -="">Quick storage drivers Download Center.
  http://Downloadcenter.Intel.com/

  Forums and Intel - Support - community
  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows not start displays the following error message

  (X) /8130/ Realtek RTL8139 810 x
  Fast Ethernet PCI v. 2.16 controller (041224)
  PXE - E61: Media Test failure, check cable of
  PXE - MOF: Existing PXE Rom
  No Bootable - insert the startup disk, and then press any key
  When I insert the factory OEM disc, everything works well, but without it, the error message comes up what can I do to start normally

  discodazz1,
  The information you listed are oriented to the network card and he doesn't see any boot device.  The first thing I would do is to check the BIOS settings and make sure that your drive is seen correctly and that the boot order is set to boot from your 1st CD then your drive hard 2nd drive.  You will need to check with the PC manufacturer for assistance with the BIOS settings.

  Then I would try the steps listed in this thread: XP without boot troubleshooting

  If you are able to enter safe mode but not any other way or you can't in safe mode then I would do the following.

  If you can boot into Safe Mode with command prompt, or if you have a XP CD and you can boot into the Recovery Console, and then run the following commands.

  Chkdsk /r

  sfc/scannow (you will need an XP CD for this command)

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying to send some files to an external drive but error message: device i/o error.

  I have an external drive that is used only for embroidery designs. I am trying to send a few folders on the drive but get the I/O device error message. What should I do to fix the error?

  Original title: error message: device i/o error.

  It may be a cable, a system problem or failure of the HD.  You have saved the data?

  You can test the drive by running chkdsk /f as indicated below

  A CHKDSK F: /R

  CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found when chkdsk attempts to repair this sector all the data available in this area may be lost.

  Run CHKDSK/r/f of a high (run as administrator) command prompt.

  Do this for each hard drive on your system.

  When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.

  Then restart and let the test to run.

  It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.

  http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/

  See "CHKDSK LogFile' below to verify the test results.

  B Elevated Command Prompt:

  Click on start and type "cmd.exe" (without the quotes)

  At the top of the search box, right-click on Cmd.exe and select "Run as Administrator"

  C CHKDSK LogFile:

  Click Start and type "eventvwr.msc" (without the quotes) and press enter

  Expand the topic the Windows logs, and then select the Application log file entry.

  Double-click the Source column heading.

  Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).

  Copy / paste the results in your next post.

• 0xc19a0020 ink system failure error message

  Hello

  I have a HP Photosmart Plus, product # CN216, model # B210a. I'm running Mac OS X 10.7.5

  Today, I turned on my printer and got the error message "ink system failure 0xc19a0020 please turn printer Off and then on.

  So I did, but still got the error. So, I did the troubleshooting, which told me how to clean the print head. I've done 3 times, but I still get the error. I unplugged the power cord from the printer, then the wall, waited, then reconnected. I still get the error.

  I use the printer at least once a week, so he hasn't been sitting unused for too long.  I have not changed anything or whatever installed lately. The ink cartridges have ink.

  Anything else I can try? The replacement print head is $72!

  Thank you!

  Sorry, but generally, this can be a bad head of printing or bad cartridges. Here is a link that will help you with this problem, even if you did most of these steps.

  http://support.HP.com/us-en/document/c03081973

  If you have already replaced the front print heads and you return to this same stage, it would be a bad printer and maintenance needs.

• HP Officejet 6500 E709n: HP Officejet 6500 E709n - ink system failure error message.

  I have a printer HP Officejet 6500 E709n.  I get the following error message when I turn on the printer:

  'Ink system failure.  "Please turn printer off, then on.

  I then do as instructed and turn the printer off, but then the whenever I re - turn on the printer, I get the same error again.  The printer is now fixed to the top and none of the buttons on the printer works except the Power button on / off.

  Any suggestions on how to proceed?

  Hi @recooke,

  Welcome to the Forums of HP Support! I see that you can not use your HP Officejet 6500 Wireless. You get a printer fault to "turn printer off and then on again" you did without success.

  Please perform a hard reset:

  1. disconnect all cables and cards of memory in the printer.  Unplug the power cord, directly from the back of the printer when the printer is still on.

  2. unplug the other end of the power cord.

  3. If there is a power supply on the power cord, disconnect one end and reconnect it.
      
  4. at the end of 60 seconds, plug it directly into a wall outlet (not a surge protector or battery backup).
      
  5. connect the power cord to the back of the printer.
      
  6. the printer should automatically power back upward.  If not, turn it on with the power button.

  7. try to make a photocopy (if your printer is an all-in one) before you connect the cables from the printer.

  8. connect the other cables needed to the printer.

  It is recommended that the printer is plugged directly into a wall socket to ensure a uniform level of power.  Sometimes, when plugged into a surge protector or battery backup, the quantity of electricity is not received by the printer.  Power problems can cause printing problems.  It is particularly important to be plugged directly into a wall outlet with wireless connectivity problems, "sleep mode" and other power problems.

  Any change?

  If you still see the error, please check your Inbox. I sent you a private message on the Forums.

  Response with the result. I hope this helps.

  Just say thank you, please click the ' Thumbs Up ' button.

• "Please insert a disc into drive I" error message problem. Help, please!

  I get the error message "Please insert a disc in the drive I" when I try to attach a drive external hard (in a case of hard disk) via a USB 2.0 to my Dell Dimension 8400 computer. I am running Windows XP Prorfessional.

  When I attach an external hard drive that comes with its own enclosure as a Western Digital MyBook via the same cable USB 2.0 the following happens. Windows Explorer shows the new disks I and J. If I try to open the drive I have, I get the "Please insert a disc into drive I"message.» However, when I try to open the drive J I'm able to do it and see the files, in this case, the Western Digital MyBook. I can also open these files.

  I searched the Internet for solutions to this problem. In some cases, the problem can be solved by renaming the drive letter, but this does not work in my case. Most of the sites I visited fail to provide a solution. Very many missions I've read on various sites, the problem seems to be related to error messages has Microsoft Windows. The solution would seem to have to disable this / these messages by changing the relevant parts of the registry. (See: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/logonuiexe-no-disk-there-is-no-disk-in-the-drive/7a158e14-6a56-4bfd-b1b5-796c3ccea3b0?page=2&tm=1341781513552, http://www.w7forums.com/please-insert-disc-into-drive-error-t11264p2.html, http://support.microsoft.com/kb/281345)

  Unfortunately, the information that I found are too vague and contradictory to me. Microsoft seems to suggest changing the value of ErrorMode in CurrentControlSet so that the user gets more no error message 'hard' (modification of the: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows\ErrorMode value = 2). However, this suggestion for the backup of SQL Server databases. It also seems a bit drastic to turn off hardware error messages. In another post the suggestion is to delete upper and lower filters in the section of the registry that controls the hard drive. The problem here is that you may have to reload the software. Also, I'm afraid I'll mess up the registry.

  I would be grateful to anyone who could tell me what parts of the need to register to edit and how to disable this message ' Please insert a disc in the drive I have. "

  I suspect that the boxes of hard drive that does not open professional XP are somehow corrupt. Unfortunately, the error message keeps me from use any diagnostic software to examine the hard drives in these speakers. In this regard, I would be grateful to anyone who might suggest a diagnosis good freeware hard drive.

  I thank the members of the forum for their help in advance.

  I really appreciate all help members can give me.

  1, the diagnostic software that youre looking for WDC, is a MS-DOS

  utility. Download from WDC, installed on an MS-DOS formatted disk, pc boot

  on disk, it automatically runs... With respect to the current problem, try to go to run, type:

  diskmgmt.msc

  MSC, locate the hd, L.click on this subject, go to actions, all, select 'enable ',.

  close the msc...

  You can also, type: cmd in run, type cmd: DiskPart in DiskPart, type:

  The type of disk list: list volume type: HELP for cmds all the...

• C6180 ink SYSTEM FAILURE error message

  IF ANYONE CAN HELP WITH THIS ERROR MESSAGE?  FAILURE of the SYSTEM of INK 0xc19a0035

  I HAVE A C6180 ALL IN ONE.               IT DOES NOT RECOGNIZE THE FACT

  THAT I HAD REPLACED A CARTRIDGE A MONTH AGO... HP brand AND NOW GET this MESSAGE.

  I RE-SET, CLEANED ALL THE CARTRIDGES AND TALKED WITH HP ON THE PHONE 2 X.   IT WORKS AGAIN FOR A SHORT PERIOD, THEN THE INK SYSTEM FAILURE ERROR APPEARS AGAIN.

  HP said I need a new?   It worked very well until this and always does this for awhile after you reset it, so can't understand

  Why should I go out and get a new one for this problem.  I hope someone can help!    Thank you!

  IS NOT THAT DEMAND THE DAY 'EXPERT' OF AID?  HAVEN'T HEARD ANYTHING YET!

  This same error started on my printer and eventually it would power on and off constantly. Apparently some defective components were used in the construction of the logic board (see photo). My C6180 there were 3 defective capacitors (the Green cylinders - breathtaking top indicates failure) and a 4th from the same manufacturer (TEAPO - many web references unfavourable to this manufacturer). I bought 3 x 330uF 16V and 1 x 680uF 10v rated at 105 degrees Celsius (total about 60cents). On the logic board, the capacitors I replaced are labeled C613, C614, C660 and C662. If you are not comfortable replacing components yourself (or is not a soldering tool), you will need to find someone who will. The repair time should be less than 30 min - I did it in 25 minutes with only a solder pen. This also fixed the ink the printer was to have system failures. A similar fix may apply to other printers.

  

• Hard drive failure: error 2000-0142 since current default Scan PC.

  Original title: error 2000 - 0142

  Activities of PC by default Scan on my laptop DELL Inspiron 5520. Hard drive failure: 2000-0142 error what does that mean?

  REDA

  According to the answer by a representative of Dell here:

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19467468/20188938.aspx

  It seems that the error means what it says - the hard drive has gone bad and should be replaced.

  I highly recommend that you only backup your data to another drive immediately and then contact Dell for confirmation about the error and advice on the best course of action.

• Windows get '0 x 80246008' failure error message update, BITS 1290 error: 0x50a.

  Original title: windows update failed

  When I try to install the updates I receive the error message 0 x 80246008. I tried to fix this error with the methods I found on microsoft on the bits service, but when I try to start the Background Intelligent Transfer Service I get the following message: could not start the service background Itelligent on local computer Transfer Service. Error 1290: 0x50a. I tried to find a solution to this error, but found nothing. It's going to stop using windows update.

  Hey beginner,.

  It may be too late, but try this (I had the same problem):
  Go to %WinDir%\inf in Explorer (which is usually C:\Windows\Inf) and search for qmgr.inf. Right-click, and then choose install. You will need the Windows installation disk, although if qmgr.dll is %WinDir%\System32 then you can potentially point to this file. Let the installation finish. At this point, the name of the service is again Intell... not melt @%any..., but it does not work yet.
  Copy the settings of BITS ControlSet001 to CurrentControlSet key - installation INF does not create this key for a reason, or it does not for me to say.
  Now, open a prompt, cd %WinDir%\System32 and run regsvr32 qmgr.dll. A pop up should tell you that the operation was successful.
  Now you should be able to start the BITS service.
  I hope this can help,
  Morc.

• EZ transfer for Windows XP displays the Permission Error Message: "you are not allowed to update Windows XP. Please contact your system administrator. »

  Install EZ transfer on Windows XP (32-bit) I get an error message stating:

  "You are not allowed to update Windows XP.  Please contact your system administrator. »

  However, I am the only user, and I am named as the administration system.  How can I fix?

  Hello

  Step 1:

  You can try to install Easy Transfer in safe mode and check.

  A description of the options to start in Windows XP Mode

  Step 2:

  You can also try to create a new administrator account and check.

  Create and customize user accounts