Display in 3D games problems

Satellite 5105-s701 (GeForce4 440 Go)
Windows xp pro

When I play 3D - like CS, Call of Duty and Star Wars KOTOR games a lot of green dots appear in the areas that are supposed to be dark. Sometimes, there are no problems, and sometimes the Green errors are everywhere.

I tried to change the display driver and I have also reinstalled the system (from recovery cd) and nothing did - I guess it's a hardware problem.

Can someone tell me what the problem is and if I can fix it?

Hello

You can try to put it up using Toshiba Power Saver. Somewhere in full power properties must be option called cooling method. Use Maximum performance.

Tags: Toshiba

Similar Questions

  • Satellite Pro 6000: display or graphics card problem

    Hello
    I don't have a model satellite pro 6000. PS600E-01NYE-FR
    1 GHz P3, 20 GB HDD, wireless bluetooth not running XP

    I understand that it is an old laptop but had been treated with great care because I got it.
    My problem is the following;

    Startup of the laptop is a route very well, but for some reason together and after no set amount of time the display fails
    a wot is visible on-screen is hundreds of tiny colored blocks, sometimes random horizontal lines
    but nothing is readable, at all.

    I tried to run a yellow one also using the video output external monitor, all appear the same.
    a computer display (although I can't check it out) to freeze.

    I replaced the heatsink fan as a precaution (using the new dough)
    the only solution I can find is replaced the ram with
    2 x 256 MB Sync 133 mHz module Samsung. This could be the problem or can anyone shed some light on this for me.

    Thanks in advance
    Display Toshiba SP6000 (?) Problem

    I am not a technician, but I assume that there is probably a problem with the video card. I'm afraid there is not much to do. You should contact the service and make them run tests to verify the functionality of the video card. If the card is faulty, just replacement will help.

  • Games problem VMware fusion 5.02

    This only happened on 5

    hardware: macbook pro 15 mid 2012 retina

    OS: MAC mountain lion 10.8.2

    Audio-visual system: window7 & 8

    game: Street fighter iv arcade edition

    everything was OK in 5.0 any for win7 or win8,.

    After the upgrade to 5.02, I can connect on the menu of the game except for the matches. VMware display an ERROR has occurred.

    There have been some problems reported with the 5.0.2 update and I recommend going back to the previous version your used before upgrade to 5.0.2.  You can download previous versions of VMware and then uninstall/reinstall Web Site.

    Use the following link: Download VMware Fusion

    Then click the watch download button and it will default to the last (5.0.2 now) but now select 5.0.1 or 5.0.0 in the Version drop-down list box.

    Also note that VMware Fusion of uninstalling/reinstalling does not remove your VMS and not counting the download time, it should take less than 5 minutes to uninstall/reinstall VMware Fusion itself.  More don't forget to uninstall/reinstall (not repair install)

    VMware Tools after downgrade of VMware Fusion.

  • Number of Collisions in the shooting game problem

    Hello, I work a simple game in which a ship fires at the approach of asteroids, and I have problems with the collision between the ship and the

    asteroid. In the movieClipI ship made incandescent chassis 6 to mean the 3 first collisions and the loss of life, and then for the fourth collision I have

    made an alpha of the 87 frame interpolation inside the boat so that he disappeared to signify the end of the game. I used a meter as shown below but all the ship

    fact is never gets so glow frame 87. Thank you for taking the time to see it.

    import of important flash libraries.
    import flash.events.KeyboardEvent;
    import flash.events.Event;
    import flash.display.MovieClip;
    import flash.display.Sprite;

    var countCollisions:Number = 0;
    var astArray:Array = new Array();
    var speed: Number = 10;
    Initializes the variables.
    var key_left:Boolean = false;
    var key_right:Boolean = false;
    var key_up:Boolean = false;
    var key_down:Boolean = false;
    var key_space:Boolean = false;
    var shootLimiter:Number = 0;
    Checks if the player presses a button.

    var: timer = new Timer(2000, 10);
    timer.addEventListener (TimerEvent.TIMER, AddAsteroid);
    Timer.Start ();

    stage.addEventListener (KeyboardEvent.KEY_DOWN, KeyDown);
    stage.addEventListener (KeyboardEvent.KEY_UP, KeyUp);

    var ship: MovieClip = new Ship()
    var backgr:MovieClip = new Background();

    backgr.x = 0;
    backgr.y = 45;
    addChild (backgr);
    addChild (ship);

    function AddAsteroid(e:TimerEvent):void
    {

    var asteroid: MovieClip = new Asteroid();
    Asteroid.x = 800;
    Asteroid.y = Math.round (Math.random () * 700);
    astArray.push (asteroid);
    addChild (asteroid);
    asteroid.addEventListener (Event.ENTER_FRAME, asteroidmove);

    function asteroidmove(e:Event):void
    {
    Asteroid.x-
    ///

    ///

    for (var i = 0; i < astArray.length; i ++)
    {

    If (astArray [i] .hitTestObject (Ship))
    {
    countCollisions ++;
    ship.gotoAndPlay (6).

    if(countCollisions ==4)
    {
    ship.gotoAndPlay (87);
    }
    If (astArray [i] .stage)
    {
    removeChild (astArray [i]);
    removeEventListener (Event.ENTER_FRAME, asteroidmove);
    }


    }
    }

    }

    }

    addEventListener (Event.ENTER_FRAME, backgroundmove);

    function backgroundmove(e:Event):void
    {
    backgr.x-= 1;

    If (backgr.x <-2110)
    {
    backgr.x = 0;
    }
    }

    Allows the main function play each image.
    addEventListener (Event.ENTER_FRAME, Main);

    Create the main function.
    main function (event: Event) {}
    CheckKeys();
    }

    Create the function KeyDown.
    function KeyDown(event:KeyboardEvent) {}
    if(Event.keycode == 37) {//checks if left arrowkey is pressed.
    key_left = true;
    }
    if(Event.keycode == 39) {//checks if right arrowkey is pressed.
    key_right = true;
    }
    if(Event.keycode == 38) {//checks if some arrowkey is pressed.}
    key_up = true;
    }
    if(Event.keycode == 40) {//checks if the arrowkey is pressed.
    Key_Down = true;
    }
    if(Event.keycode == 32) {//checks if the arrowkey is pressed.
    key_space = true;

    }
    }

    function KeyUp(event:KeyboardEvent) {}
    if(Event.keycode == 37) {//checks if left arrowkey is released.
    key_left = false;
    }
    if(Event.keycode == 39) {//checks if right arrowkey is released.
    key_right = false;
    }
    if(Event.keycode == 38) {//checks if some arrowkey is released.}
    key_up = false;
    }
    if(Event.keycode == 40) {//checks if the arrowkey is released.
    Key_Down = false;
    }
    if(Event.keycode == 32) {//checks if the arrowkey is released.
    key_space = false;
    }
    }

    function CheckKeys()
    {
    shootLimiter += 1;

    If (key_left)
    {
    setDirection (1);
    Ship.x-= 5;
    }
    If (key_right)
    {
    setDirection (0);
    Ship.x += 5;

    }
    {if (key_up)}
    Ship.y-= 5;
    }
    {if (Key_Down)}
    Ship.y += 5;
    }

    If ((key_space) & & (shootLimiter > 8))
    {
    shootLimiter = 0;
    var b = new Bullet();
    addChild (b);
    b.x = ship.x + 50;
    b.y = ship.y + 3;
    addEventListener (Event.ENTER_FRAME, moveBullet);
    }

    function moveBullet(e:Event):void
    {
    b.x += 10;

    If (b.x > 600)
    {
    If (Contains (b))
    {
    removeChild (b);
    }
    removeEventListener (Event.ENTER_FRAME, moveBullet);

    }
    for (var i = 0; i < astArray.length; i ++)
    {
    If (astArray [i] .hitTestObject (b))
    {
    removeChild (b);
    removeChild (astArray [i]);

    removeEventListener (Event.ENTER_FRAME, moveBullet);
    }
    }
    }
    }
    function setDirection (param) {}
    If (param == 0) {}

    ship.scaleX = 1;
    } else {}
    ship.scaleX = - 1;
    }

    }

    You're a little around with it and you have not yet removed the asteroid of the table... see if what follows helps to resolve the issues...

    for (var i = 0; i)

    {if (astArray [i] .hitTestObject (Ship))}

    get rid of the asteroid
    MovieClip(astArray[i]).removeEventListener (Event.ENTER_FRAME, asteroidmove);
    removeChild (astArray [i]);
    astArray.splice (i, 1);
      
    countCollisions ++;
     
    If (countCollisions > = 4) {}
    ship.gotoAndPlay (87);
    } else {}
    ship.gotoAndPlay (6).
    }
    }

    }

  • Download from itunes game problems

    iTunes game is of no use to me. I have only had it hoping that it would save everything before that my hard drive has been replaced, but no luck so I didn't renew. I downloaded all the music to my mac and my iphone, however, do not renew the service, music that had certainly been downloaded on my phone (indicated by the phone with a checkmark icon) return soley on the cloud that I have to pay $25 for. Someone else has experienced this problem or know of a way around having to spend more money to get my music? (Apple keeps the history of purchases for more than 4 years, so more that 3/4 of my library cannot be simply re-uploaded. I contacted apple several times on the recovery of past history of purchase and that the only response that actually my question that I thought they could try to search for individual songs of each order number, which I had no idea that I had to keep for thousands of purchases).

    If the media is always on your iPhone, see recover your iTunes from your iPod or an iOS device. Have you changed your Apple account information. I have purchases dating back to 2007.

    TT2

  • Display in FF8.0 problems

    Since the update to FF8, I had a number of questions

    -Menus and menus drop down appear transparent when you hover over them. This includes the address bar, form fields, right-click menu, main menu of the firefox button. This problem is corrected is running in safe mode.

    -Not all images load on Web pages like twitter.com, or the bbc.co.uk , this isn't a problem with their servers because they load fine in chrome.

    -As well as images, CSS not all charges. JS can also not load.

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

    Safe mode disables extensions in Firefox 4 and later versions, and disables hardware acceleration.

    Try turning off hardware acceleration.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • Satellite Pro M10: Display of the strange problem

    I have a M10 Pro of the Satellite with 14 inch display is 6 weeks out of warranty.

    The other day, I got cold room and the display went funny - odd pixels, green and black with small points which then becomes more clear screen so that the entire screen is a mixture of points fluorescent which becomes white and then things come back.

    Then, the cycle repeats itself after a few seconds.

    I perform a restart and everything's going well for a while, and then it restarts. I move the laptop in a cold room and it's ok again. I can't understand that the issue occurs on Windows XP and SUSE 9.0 (although it just hangs). I have run SpyBot, have the latest virus checkers, the update of Windows (SP2) and NVidia drivers.

    Any ideas?

    Seemed to have solved the problem by dismantling the machine, could not do not get all the way and completely remove the top from the bottom as there seems to be a hidden screw. Everything is fine now, could have been the fact that some of the screws were loose.

    Also had a full SpyBot and Virus Check.

    I also had to re - save under a different name, since it is "Specific country" even if I thought that I had, I now have three profiles - two I created recently, and one I could not remember the username for, would be really better if password request tells you the user name to an e-mail address it is registered. It's really hard to keep track of them so I have a lot of connections as a computer scientist. Really really annoying and stupid system.

  • Tecra M3 dark display, checked the usual problems

    Hello

    My M3 went dark, it flickered on and off for about a week and then completely dark. I still work if I get the right angle and an external monitor is fine.

    If haven't tried a new cable from the screen, no difference and a new inverter, also no difference.

    Sometimes if I switch between views (Fn + F5) I can get the display works fine, but as soon as the screen is turned off for some reason it won't once again.

    I also re-greased the heatsink on the NVidia chip.

    And I checked the backlight by plugging a converter working on another laptop.

    I have a M1 and there is a relay type sound when something has changed on the screen, I can't remember if the M3 never makes a similar sound, even if I used it for about 5 years.

    I also saw that he suggested that he might think that the cover is closed, I don't know how the M3 detects that the lid is closed.

    Any suggestion or help would be welcome.

    > My M3 went dark, it flickered on and off for about a week and then completely dark. I still work if I get the right angle and an external monitor is fine.

    This means that the graphics card chip was Ok, which means that it could be a display problem
    I doubt that it ups s related question. If FL inverter would be defective, then you'd see everything on the screen, but everything would be visible behind a thick fog.

    Of course, it s that my personal opinion and nobody would be able to tell what dysfunction part without running any hardware, test procedures
    Then maybe you should ask a support technician

  • Satellite A105-4094 display - only half screen problem

    So my screen is showing half, it is a compressed version of the full screen.
    The right of the screen is turned on, but all black and just after the point halfway on the left side is a bunch of image then a strip of black before you see the compressed image.

    The output works very well for an external. I know that this is not the video card. I reinstalled the Bios updated, and I tried to use powerstrip.
    I'm sure it's a software problem as in system devices that my screen appears as flat digital display with a maximum of 1024 x 768 resolution, but the native is 1200 x 800 and it used to describe something else as internal computer monitor toshiba laptop.

    No driver hasn't solved the problem and I can't find a similar problem anywhere!
    Anyone has any ideas of what this could be?

    He used to do this and a restart would fix it sometimes, but now it's just stuck like that.
    If you need photos, I take screen shots later, but I have no available right now...

    You have an Intel graphics card?

    If so, go to the control panel and access the Intel Graphics Manager.

    Here you have to select the display settings and try to put it in full screen (without borders)

    If the problem is related to the software then this accelerated procedure should help you.

    But the problem could be related to a hardware problem too

    In this case he needed a help of ASP.

    Good bye

  • Satellite Pro P100 - multiple display after Exchange screen problem

    My laptop: Toshiba Satellite Pro PSPA6A-028017 with Nvidia GeForce Go 7900GS

    OK, here's the story. I turned on my laptop about a week ago and the screen is blank. I plugged in a monitor external via AVI and tried Fn + F5, but nothing. When the computer reboots, the external screen worked. When I tried to turn on/off displays the external monitor is turned off and I found myself with an empty screen - I was obviously spent on screen of the laptop but working blind, I couldn't work out how to get the external monitor to start again. FN + F5 did nothing.

    At that point, I called Toshiba for the support of the warranty (on-site, next business day). They had a technician with new monitor/display on site the next day (after a few calls me to follow up). It has replaced the screen but struggled to lift the screen up and running. He finally managed to logon Windows safe mode and get running but only display on 800 x 600. It has updated the Bios and drivers. He could then up to the 1024 x 768 resolution. Highest and the screen would be left empty.

    At that time we plugged in an external monitor via VGA. It worked, but the technician couldn't get the each display to run on each resolution. He left him speechless and he acknowledged that things still are not good. Later, after that the technician had left, I managed to get views working so each to their own resolution. However, I could not always connect the external monitor via DVI (VGA only). I was at least temporarily to work!

    The next morning that I turned the laptop on to find that I was back was started. No display on the laptop and on the external monitor only low resolution. It seems that the external monitor is simply cloning which should show the computer screen.

    Under the display properties > settings the display shows:
    1. (multiple screens) on NVIDIA GeForce Go 7900 GS
    2 Dell G2410 (Analog) on NVIDIA GeForce Go 7900 GS

    I know that when everything is working properly, he said not many monitors. The only screen I see is the Dell external monitor. And when I identify the Dell screen is no 1, even if it's not listed number 2.

    I don't know anything about the cards video etc, but a theory I have is that adapter is defective and is only show the analog signal. That is why I think that the screen of the laptop and external monitor (connected via DVI) works not done the external monitor connected via VGA (but it seems to be imitating the screen of the computer, allowing only the laptop screens range of resolution). Is that possible?

    Someone at - it ideas? The problem is likely to be the video card? I'm puzzled. I'll have to get the technician on the spot back (which will probably still 2 days and several calls, follow-up) and I don't want to lose any time. I have a business to run and I have now lost a weeks work already. If I can offer some strong theories before the technician comes on the spot, sometimes we can get parts ordered in advance.

    My warranty expires in a few weeks, so obviously I want this fixed correctly in the shortest time. I don't want to wait 2 days for a technician to come and have to wait another day or two for parts.

    Help, please!

    Thank you
    Ghjghj

    It is not easy to offer the correct answer and explanation why this happens here on the forum. In laptop cases should be tested with diagnostic tools to ensure that what is the problem.
    OK, exchange of display was a step in the right direction but, of course, this question is more complicated and doesn t happen due to the defective screen only.

    I agree with Akuma and also thinking that there must be a hardware problem on the motherboard. Before the expiration of the warranty, you should contact the service again and let check portable equipment.
    The fact is, if there is that no book of hardware malfunction should work fine preinstalled with delivered recovery image (Toshiba CD/DVD recovery facilities).

    Please, don't wait too long and contact ASAP. They check your laptop. the warranty is still valid and your laptop needs to be repaired.

    Good luck!

  • resolution in games problem

    Hello world

    When I try to select the resolution 1920 x 1080 display game gets zoomed in and most of the screen appears outside the frame of the screen :/ but if I select 1366 x 768, then the game screen is mounted on the screen :/ is there any fix for this because I would like to play on 1920 x 1080 that my screen supports :/ but can not when some of the games there are weird and usually work correctly

    AHA I found what was the issue behind the issue of the resolution, apperently windows 8 has not been properly in mode 1920 x 1080, because once I installed windows 7 is in this display resolution, and then I tried the ACE of spades on windows 7 and guess what? When choose 1920 x 1080 inside the game made the screen fill properly it doesen't go outside display or anything like that so it sems to have a bug with windows 8 apperently because it happens if I had windows 8 so that it works fine on windows 7 :/ strange

  • W540 - brightness of the display and audio output problems

    Hi all

    I've got 2 separate but really annoying problems with my W540 20BH:

    -display brightness keys does not:

    upon awakening from Hibernation, sometimer (really, randomly!) mode the brightness screen (Fn + F5/F6) keys do not work... If the brightness of the screen is stuck on max, min, or an intermediate level...

    Any who experience this problem? How to solve it? Is there a way to stop and restart the process that controls the Fn keys?

    -audio channel switch gets stuck

    A normal behavior of the audio configuration is:

    (1) the disabled speaker, microphone disabled volume

    (2) when you plug a headphone 4 pin, the headphone volume is running, microphone of the headset is turned on; the speaker volume is always turns off.

    (3) when you unplug the headphones, the volume of the speakers is always 0

    After each start up, the audio channel is 0, but don't commute between the helmet when it is plugged!

    I have to open the Control Panel, properties of realtek. With this window, disconnect and reconnect the headset. Now the volume has its normal behavior.

    Anyone experience this? You have a reversal or a better way to configure the audio channels and events, which is able to bypass the realtek Manager?

    Thanks in advance to everyone!


  • Photosmart B109 question - display message print head problem cannot be removed

    Hi all, I just bought a used B109 printer/scanner, and I can't get rid of the message on the display screen.

    I bought the unit knowing he had a problem with Printhead and am waiting for a new print head, but the problem is, the language of unity has been defined in Czech by the former owner, and I want to change it to English. However, the process to change the language (press on high righ, middle left and bottom left buttons and the display screen) will not work because the display shows the message print head problem, and I can't get rid of the message.

    Is it possible to access the menu, while the print head message always?

    Oh, and is it possible to really connect with HP? Through their support just site ends with Q & A generic, that does not solve my problem as stated above... :-(

    Hello TonyW1967,

    Welcome to the HP Forums.

    In fact, you will have to wait until the new printhead is installed and clear the error before we can enter the setting menu to change the language on the printer.

    Here's the information to call the Tech Support of HP.  If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

    Thanks for your time.

    See you soon,.

  • I'm having trouble installing a game problem event name: BEX

    I have problems installing a game.

    Signature of the problem:

    Problem event name: BEX

    Application name: WoW - 4.0.0 - WOW-frFR - install .exe

    Application version: 4.2.0.4670

    Application timestamp: 4d081ca6

    Fault Module name: WoW - 4.0.0 - WOW-frFR - install .exe

    Fault Module Version: 4.2.0.4670

    Timestamp of Module error: 4d081ca6

    Exception offset: 0019de91

    Exception code: c000000d

    Exception data: 00000000

    OS version: 6.1.7601.2.1.0.768.3

    Locale ID: 1033

    Additional information 1: 5ac1

    More information 2: 5ac187d817eb889e7cb2fb6c438b5fda

    3 more information: 832f

    Additional information 4: 832f14b92050ce4c9ad1e3667aabcf1d

    Read our privacy statement online:

    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:

    C:\Windows\system32\en-US\erofflps.txt

    Try the procedure described here: http://us.battle.net/wow/en/forum/topic/2416194068

    If those who do not work, try to create a new post on the Blizzard support forums.

  • In Windows XP hearts game, problem with the notation.

    I get too many points when I get 1 or 2 rounds of heart or not points when I get several tips of heart or the Queen of spades. The score is not correct. What is the problem with that?

    Hi maur4you,

    You can try to turn off and turn on the game in Windows XP Add/Remove Windows components and check.

    See the following article:

    How do I add or remove games in Windows XP

    http://support.Microsoft.com/kb/307768

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for