Display of metadata to fetch the user's privileges

Similar Questions

• Display of metadata to fetch the privileges granted to a role

  Hello
  
  I have a doubt in the display of the metadata of the roles, please give me more details on the same.
  
  According to dba_roles, I could see the list of roles and to dba_role_privs, I could see the list of users who got this role.
  
  Now, I would like to make a list of the privileges granted to this role. What metadata view I could find this information, please help.
  Thank you.

  In addition to SY's message:
  to find out which data dictionary tables can help you:

  SELECT *
  FROM dict
  WHERE table_name LIKE'%ROLE%'
  

• The user's privileges are not be correct.

  Probably about six or seven months ago a few changes have taken place in my system that causes the user's privileges in newly created records files to create one or the other a very low (or nonexistent) level.

  My system has two user established ID: default Administrator (1) which has been renamed "bossman") and 2) Gary (determined at the time of installing OS).  Two of these user accounts have (at least they seem to have) full control system privileges.  It seems that all the folder/file access privileges CAN be established by one of these users ID; but the installation program and the simple creation of file/folder inside the ID does not automatically establish these new files/folders with full privilege rights that I expect.  This means that these newly created folders/files should be reviewed on an individual basis to establish all the privileges either of these administrator level users.

  I want to take place when a new folder/file is created or a program installed, is that the full control privileges for these two users (at least the user who creates the folder/file or install the program) are assigned privileges of full control to the folder / file (s).

  Suggestions on how to fix this annoying privilege setting ommisson would be really appreciated.

  I don't really know where to start looking for the solution to this problem.

  After re-reading your problem and do a little research and a few tests, I think you have a problem of "legacy".  Normally, creating a new file or folder within a different folder will inherit what appeared folder had permissions.  However, there is a way to disable this legacy.  When inheritance is disabled, then a new file or folder created inside a parent folder will be an amount stripped of access.  This is specified by the parameter "applies to...» "in the ACL Editor.  So all you probably need to do is go to the folder top-level parent and specify that its legacy features apply to the "This folder, subfolders and files" and check the box to "replace all permissions of child object with permissions inheritable of this object.  Change the field "applies to the" to "This folder, subfolders and files" provides future objects will inherit as well.  For a visual look at Figure 10.23 and table 10.18 on pages 634-635 at the following link.  The text also describes the legacy.

  <>http://books.google.com/books?id=8MkwSmOYi6QC&pg=PA631&lpg=PA631&dq=acl+inheritance+windows&source=bl&ots=sMfpk2Mjx-&sig=DoVuadbQYT7j1tciYWz8ol0wWGU&hl=en&sa=X&ei=OSoKUJTmL8qs2gX8qMz5Dw&ved=0CFcQ6AEwBQ#v=onepage&q&f=false>

  I don't have a handy WinXP machine, but it should be substantially the same as on my machine Windows7 tends in that direction:
  Right click folder-> properties-> Security-> Advanced (tab)-> change permissions-> Edit and you should see a ' applies to: "box under the name.

  This setting is quite hard to find and I congratulate you, at the same time, to find this setting...

  HTH,
  JW

• How to read/write metadata "comment by the user?

  With my plugin, I have to write a string inside the metadata "User comment" field on Lightroom. I write successfully in other fields such as side or key words, but I can't write a comment to the user.

  How to do this?

  Unfortunately, the comment field of the user is not available through the SDK - this is an oversight that was reported two years ago.  Please add your vote and detailed opinion to this bug in the Adobe official feedback forum report: Lightroom SDK: no way to access EXIF:UserComment | Community customer Photoshop family. Unfortunately, Adobe has fixed the bugs very little, or none, in the SDK in recent years, so I'm not holding my breath that it will get fixed soon, if ever.

• How to display data that filled by the user after you send the form?

  Right now I am doing a project on the e-complaint, can someone help me how to view the data that have been filled by the user based on the submitted form which also displays the primary key for the reference of the user.

  Here is my form code:

  <?php
    if(isset($_POST["compSubmit"])){
  
    $category=$_POST['category'];
    $typeDamage=$_POST['typeDamage'];
    $serial=$_POST['serial'];
    $location=$_POST['location'];
    $description=$_POST['description'];
    $name= $_SESSION['sess_nama'];
    $SiD=$_SESSION['sess_sID'];
    $Course= $_SESSION['sess_Course'];
  
  
    $con=mysql_connect('localhost','root','') or die(mysql_error());
    mysql_select_db('kktm') or die("Cannot select DataBase");
  
  
  $sql="INSERT INTO complaint2(Name,ID,Department_Course,Category,Type_Damage,Serial,Location,Data_Time,Complaint,Status,Report) 
  VALUES ('$name','$SiD','$Course','$category','$typeDamage','$serial','$location',NOW(),'$description','Pending','')";
    $result=mysql_query($sql);
    }else {
    echo "Fail to Complaint!";
    }
    ?>
  

  I hope someone can help me with this...

  Thank you.

  You use the deprecated mysql connection. YOU NEED to SWITCH TO MYSQLI OR PDO.

  You also do not have a data validation and remediation. You really need to.

  But to answer your question, you can add the following code:

  ECHO '.

  ";
  
  print_r($_POST);
  echo "

  ";

• The search filter - how to get the value of the metadata entered by the user

  Hello
  
  I wrote a fixUpAndValidateQuery filter where I want to modify search QueryText.
  
  I tried to update some of the metadata values entered by the user and then let the fire search query.
  But I'm unable to get the values of metadata user has entered in my java code filter.
  I'm getting like below
  
  DocType string = binder.getLocal ("dDocType");
  
  It returns the value "no" even if the user gives the value of the Doctype in the search engine.
  
  Am I missing something here?
  
  Kind regards
  Rajendra

  Search filters tend to manipulate the query that ends up being called by the search service. If this isn't what you're trying to accomplish there are probably better filters for you before the actual query is run or after the query is executed.

  If you really need a connection of database at the moment and you can't find a better filter for what you're trying to do that has a database connection, you can always create one like:

  final Provider dbProvider = Providers.getProvider("SystemDatabase");
  final Workspace myWorkspace = (Workspace) dbProvider.getProvider();
  

  Warning: If configure you your own db connection for a filter where no database connection is available, you will need TO release the connection too.

  myWorkspace.releaseConnection();
  

  Published by: fscherpe on February 16, 2011 06:07

• Create the user with privileges only data entry.

  Hello guys,.

  A very basic question. I created the request of APEX, well obviously the user with whom I created this application has developer access, now I want to create a user who is able to see the developed application, I tried to find the user options, but could not.  Someone can help me to find the option, I need to follow, so that the newly created user is only able to enter data into forms and run reports and should not be able to make changes in the application developed.

  Concerning

  Faisal Niazi says:

  A very basic question. I created the request of APEX, well obviously the user with whom I created this application has developer access, now I want to create a user who is able to see the developed application, I tried to find the user options, but could not.  Someone can help me to find the option, I need to follow, so that the newly created user is only able to enter data into forms and run reports and should not be able to make changes in the application developed.

  Create 'end users' by selecting No for the user is an administrator of the workspace and the user is a developer account privilege options create new user accounts. These users connect to the APEX Application Builder. It can be given direct access to a request by specifying the ID of the application or alias to the URL:

  apex.oracle.com/pls/apex/f?p=

  or

  apex.oracle.com/pls/apex/f?p=

  Using an alias for the application is recommended.

  To restrict user access to pages, components and specific applications, create authorisation schemes and the apply to the application level.

• The user image display

  When a user login, I wanted to display a small image of the user) about the name of connection in the upper right corner.  How can I achieve this?

  George

  gkthomas wrote:

  When a user login, I wanted to display a small image of the user) about the name of connection in the upper right corner.  How can I achieve this?

  See the image in the dashboard Navigation Bar display list customary at the APEX 5

• Suppress the display of the user based tab

  I am putting together an application and I have three classes of users using Apex 4.2.0.00.27.

  (1) public - the user can access all public pages with no connection.

  (2) registered user - the user can watch reports.

  (3) Director - full access to the application.

  The public access two tabs.  The registered user can access 5 tables (2 public pages and 3 reports), and the administrator can access all pages.

  How can I suppress the display of tabs based on the users role?  I looked at the properties of the tabs and don't see anything that would be useful.

  Thank you

  -Rob

  Rob,

  It's the perfect use case "permissions."  Create 3 authorizations and in the definitions of the tab you can set which permission is allowed to see the tab.

  -Jeff

• How can I make user custom interface e-mail allow the user to control the tests?

  Hello.

  I am totally new to TestStand and I try to use it to test a simple dll to a larger system, as kind of an assessment to see if we want to migrate to this system.

  I use TestStand 4.2 with LabWindows/CVI 8.5... He was going along fine, but now I'm stuck trying to customize the user interface

  Specifically, I want to have the user be able to control what are called in the order and be able to choose (through, say, a digital control) what inputs are sent to the object to be measured.

  I found a few examples, but they seem just to manage the display of TS data to the user interface, not * is * data of the UI back to TS...

  Is there a tutorial that handles such things?

  I'm seriously lost here.

  To answer your question, the best way to get info from the user interface in the file of the sequence is to do the same thing were the examples you were watching.  Except that your data will be the SequenceContext.  Then, you can use the nodes property or even the screws TS to set the properties inside your sequence.

  There may be a better way to accomplish what you want though.  Why not pop up a dialog box (written in CVI) in the (substituted in your movie file) PreUUT with a list of 'tests' of your sequence?  The user can select which tests they want to run.  Then the prerequisites for your steps which indicate the step execution based on what the user has selected.  The dialog box can also have entries that is filled to the sequence (with parameters) which can FileGlobals or people of the country or whatever.

  User interface messages are used for the duration of decisions or feedback.  It seems that your case would be more than one once a decision to run.  Unless they choose tests during execution.

  Hope this helps,

• Change the color of the user interface in the settings?

  While I was living now displayed in format pdf of the user manual, and I couldn't help but notice that, under settings, she claims there is an option to change the color under settings > background (I think), and yet, there is no option on my Fuze +.  Anyone else notice this?

  This feature is supposed to be coming in a future update. This feature should not be registered in the manual.

  
  

  The Forum Admin

  slotmonsta

• Pop - up Messagebox when the user enters an incorrect value in the TextField

  

  I want to display a pop-up message box when the user enters an invalid value, or an empty value in the TextField.

  Popup wil Messagebox displays a notification message to the user to enter the correct value in the textfield.

  I want to use c + c++ / qt code cascades.

  Have you made progress on this issue?

• In Windows 7, cannot access the user profile get the error "the service user profile Service has no logon.

  When you try to access the user profile, get the error message "the service user profile Service has no logon.  User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should).  Anyway to fix the corrupted if user profile profile are available?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• Police great icons for the user's selection

  Hello

  I try to display a selection list to the users with the list of fonts icons impressive for their selection.

  I tried the approach

  http://www.relational.es/blog/en/Apex-how-to-create-a-select-list-with-fontawesome-icons/

  But still the icons are not displayed.

  Is there another solution for this?

  The list of icons is stored in WWV_FLOWS_STANDARD_ICONS. You can configure a synonym to this table and then do a select on it. This avoids to hardcode all the icon/class names.

  And instead of using a select list, you can create a report that simply select it and Sho icon. Then use this report as a modal page or a dialog box online.

  It would be similar to what team Apex in the page designer. It requires a little more effort for the installation program, but the result for the icons is much better than what you can do with a simple select box.

  

• the user is logged out automatically - timeout?

  Hello

  It is quite difficult to describe my problem... Well, we have an application with direct payment, but no custom window. Means, when the user opens the application, he sees an empty library, when he signs, he sees folios there right to. When he signed, he sees only the folios he is already downloaded, the other those diappear. Very simple. Works perfectly on my device.

  Now I'm getting reports of several users on the following behavior:

  1. the user connects to the library

  2. 3 folios appear to which they have access

  3. the user downloads 1 of folios (good)

  then

  4. the user closes the application (with double click on the home button and close the application window in "task manager")

  5 when it opens again the application, it is automatically disconnected, but see again all 3 folios - even those it has never downloaded before!

  6 when it tries to download one of these folios, the accidents of the application - which is quite logical, cause it there no right to download the folio.

  My questions are:

  1.

  Why the user get disconnected automatically when the application is closed? (doesn't happen on my device, I stay permanently connected)

  2.

  Why the library always displays all folios, even if the user is offline?

  Note: If the user logs on "manually" in the library (upper-left button), folios disappear properly.

  I was unable to "reproduce" this error on my device, but it seems to happen to several users.

  Can you help me?

  Best

  Ninetta

  I asked around, and it is likely that the call to RenewAuthToken does not work correctly. It is called when the user opens the application. A response not valid will be to disconnect the user.