Display problems HDMI out

Similar Questions

• Qosmio G30 - external display problem (HDMI)

  Hello

  I have Dell UltraSharp 2407WFP display with HDMI and DVI (with HDMI DVI converter) entry - I use HDMI as my primary connection. My Qosmio has NVidia 7600 Go card with the latest drivers provided by Toshiba for Vista 32 bit (version 7.15.10.9813).

  My monitor was working fine months ago (same thing with my HDMI TV) I had no problems - but now I have a constant flickering problem (goes black watch my office then becomes black again) computer laptop monitor and no image on external display at all and I get 'balloon' message in the taskbar that my display driver has stopped working and it recovers when I leave my HDMI cable.

  any ideas?

  Thank you
  Bran.

  Hi Brani

  It seems that the error comes from the display driver.
  Why you n t try to remove the old display driver and try to reinstall the graphics driver of the European driver Toshiba page
  You may notice some improvements.

  By the way; It might be useful to know that the Qosmio G30 supports the standard HDMI V1.1 (up to 1080i resolution).

  Good bye

• Dell xps - 27 all-in-one touch - Can theHDMI out display the HDMI-in feed as well the PC

  Pre-sales query.

  On this screen is it possible if you have a connected device with taken HDMI input is a laptop, or gaming device that the HDMI-in connection on the screen will be also powered on thanks to the HDMI-out connection? So if an external device is connected to the HDMI-in this viewable on a projector screen or second via HDMI?

  I guess it's a given that the power of the touch screen PC display via HDMI.

  Thanks for your help.

  E

  Lol it's not a passage through the installation program. The device connected to the HDMI in appears only on the screen 27 XPS specification. HDMI output displays only the screen 27 XPS.

• Display problems with all types of terrain and graphic

  Hello

  I have display problems general with all types of chart, graph or plot that I try to use, on two different machines, both with NVIDIA graphics cards.  A machine is a MacBook under XP SP2 in bootcamp and the other a Dell T3400 workstation (or something similar) under XP SP3.

  I posted this thread earlier which Ben replies to the weird graphic behavior.  Ben suggested that I try to simplify my code as much as possible while keeping the bad behavior and by submitting to the NC and the forum, because it is others have had problems of graph.  I tried, but in vain.  Display problem continues and continues and continues and then they just go and I can't get back by unscrewing the last stage of reduction or simplification of code.  But at some point during the reconstruction of the code, which I cannot determine, returns the bad behavior.

  So, I was set up with graphics looking for shit, until recently, when I thought I'd try some suggestions of other messages to a XY-plot function as a graph by creating a buffer and using nodes of ownership of land for the range control.  Things seemed promising, until my "XY table" started getting shit, too.  This time, the issue was with the grid lines becomes all chopped, attached images.

  I am out of resources here.  I think I'm running out of options to display graphic data in an acceptable manner.  Do I have to display data by using an Excel chart in an ActiveX container in Labview?  I'm not skilled enough to do it again.  I like Labview, it is the only programming language that I am competent even remotely help, but it's just inferiorating.

  Any suggestions would be much appreciated.  Thanks for reading.

  -Greg

  Greg,

  is there a particular reason why you use the bar plots - view superior graphic style? Try activating the legend of the plot, go to the bar plots and select the first track of the Bar Style. Your chart is displayed very well after that.

  See you soon,.

  Cerati

• Brightness display problem?

  I bought this lappy (hp pavilion 2016tx g6) only 3 months back. to start, it seems having a display problem that I initially ignored. as the lappy starts beginning of brightness screen to flactuate.not proportions, but it is notable & if you work on it you can not miss. It happens a lot & don't become a kind of everyday / every time that case. I'm aware of display setting that occurs when power is plugged in & on & I assure you, this isn't what I'm talking about. It happens when I'm working on it if plugged in or out. could someone help me with that please? For those who ignore product its config is---> (3rd gen) i5, 4 GB RAM, 1 GB graphics card (Radeon) in additions to the Intel HD integrated card.   Thnx in adv.

  Hey Nick,

  Stop fighting with him.

  Call HP and ask for help.  It can be a little bad hardware... it might be something that can be adjusted.

  The guarantee is made to that kind of thing - if it's broken, whether you can get it repaired.

  Nevertheless, it is a new laptop and it should make you happy.  Get the information you need to be happy again.

  Contact HP

  Good luck!

• display problems, shut downs, restarts

  Original title: Windows 10

  I have upgraded from windows 7 to windows 10. I hate it, I have had no trouble with my computer since then, display problems, shut downs, restart ect this is the worst operating system. my computer is only a year and a half. I did all the recovery disc, the system image, repair disk and back ups from the first day. at - it someone now how to return to windows 7 or I have to take it to a tech and spend more money and time. I would also not recommend 10 to anyone unless you want a mobile phone instead of the computer. I might be old school, but I never had these problems before installing windows 10. Help

  Hello

  Use them if you want to try to fix the problems. Because the computer is not
  This old do not forget to check with the help of the manufacturer of the motherboard of the system,.
  their documentation online and drivers and ask in their forums on any

  known issues and compatibility.

  If you are a 3rd party antivirus on the operating system you upgraded OR if you have a
  now uninstall it and then run the removal of its creator tool. Use Windows Defender
  in Windows 8/8.1/10 is a complete antivirus. Despite all the hype out there
  Windows Defender and Windows Firewall are real superstars.

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  ===============================

  Check this box:

  Right click on start - Control Panel - the troubleshooting button - right click Show all.
  Maintenance of the system.

  -----------------------------------------------------

  Windows key + X - command prompt (Admin)

  SFC/scannow

  Note If this poster of uncorrected errors - do underneath without worrying.

  When finished that run these:

  DISM / online/cleanup-image /scanhealth

  DISM / online/cleanup-image /restorehealth

  Note If this indicates errors not corrected - do underneath without worrying.

  Then, restart the computer.

  Make sure that you run the BIOS and latest drivers available.

  Look for the updates with system Maker (manufacturer of motherboard for customized systems)
  for BIOS, chipset of low level driversand the major embedded and separate
  device drivers. Run update DriverView - VIEW driver Microsoft set hide -.
  those without drain on their behalf.

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double-click - driver
  tab - write version information. Now click on UPdate Driver (this cannot
  No matter what as MS is far behind the certification of drivers) - then do a right click - Uninstall.
  RESTART this will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and
  then device Maker (Realtek, Intel, Nvidia, ATI, for example) of the site and get their
  the most recent versions. (Look for BIOS, Chipset and software updates from the Maker system
  (website here).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  Heck manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Pavilion dv4-1100ea display problem

  Hello, I have a HP Pavilion dv4-1100ea which has display problems.  The LCD screen is blank. When I turn on it starts the fine on an external monitor.

  If I shine a strong light on laptops LCD screen I can see the login screen and I was able to open a session.

  Is it possible to tell what happened to be defective? Does the backlight, Inverter or LCD?

  Thanks for the help,

  You were spot on. It turned out that the inverter was not defective it was all down to the cable not properly connected screen.

  I couldn't see the display cable connector when I replaced the inverter because it covered the keypad cover.

  I have the UPS old back in, cable connected correctly display and rear display. Thanks for the help

• Display problem. The images have random black or white boxes that appear at different zoom levels. Picture is ok 100%

  I have recently updated my iMac last Adobe CC retina and now experience display problems. The images have random black or white boxes that appear at different zoom levels. Images ok 100% and some other levels of zoom.

  I've read other posts with the same questions.

  When Adobe gets out a fix, as this seems to be an error as Adobe making a lot of different HW platforms.

  Hi Martin,

  Please go to Preferences > Camera Raw and uncheck use display adapter. Click OK.

  Restart Photoshop and check for the issue.

  ~ UL

• There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  Apparently, you're trying to use AirPlay to display content that is protected in a way that not only allows the copy.

• Retina MBP display problems

  I vaguely remember that there is a kind of reminder for display problems on some models of MacBook Pro retina. I don't remember the nature of the issue, nor the accurate models who were eligible. I have a 15-inch model, end of 2013, and what I see is pictured below (dead pixels). Can anyone remember if there was a recall and that this issue would be covered?

  

  2011-2013 models.

  To my knowledge the retinas did not have a reminder. However, I got my rMBP 2012 15 "screen changed due to ghosting. I do not know if Apple which is still.

• Mini display to HDMI adapter double link

  Can I use a mini display HDMI Dual link adapter to connect 3 HDMI TV to a Mac Pro?

  I never heard of a "Mini display Dual HDMI link.

  There are double-ling mini displayport > DVI adopters as the double bond is required for DVI so a resolution higher than 1920 x 1200.

  You can get the dispatchers who will share a single HDMI into two identical signals. You may be able to get one which divides into three signals. A power supply may be necessary for a this type separator

  A dispatcher will give identical screens on each monitor.

  What model Mac Pro?

  What card graph (s) installed?

  Want a different output on each monitor?

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• Mac book air display problem

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after entering the password and pressing on enter three lines (not really lines they look more like lightning, appear from the top of the screen) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen this thick green line 3 inch appears and goes about a second or 2.

  help someone?

  Thank you

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  If no success, take a picture of the problem.  Make an appointment at an Apple store genius bar for a free evaluation.  If necessary, show the technician, an image of the screen.

  Ciao.

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• Display problem on my A60 Pro Sat

  The display on my satellite A60 pro features a strip of wide pixelated of 6-7cm at the bottom that hides my mouse cursor and the taskbar. The mouse is still active behind it. Mode full screen using an external monitor is seen. The group changes with my office window or active but is just vertical color bands. What is the problem and can get rid of him.

  Hello, Robert

  Have you changed anything on your device or this occurs suddenly display problem?

  I'm really in idea. If you want you can reinstall the unit with recovery DVDs. If the problem persists it is obviously a malfunction of the display. In this case, you must contact partner in your country.

  If there is some serious hardware issue please let us know.

  Good bye