Dell xps - 27 all-in-one touch - Can theHDMI out display the HDMI-in feed as well the PC

Similar Questions

• Dell XPS 2710 all-in-One will not start, the totally blank screen

  Hello. This is my first post on the forums and I hope someone can help me.

  The Dell XPS 2710 all-in-one I bought for my 10 year old 15 months ago (Yes, that means that the guarantee is expired) will not start. No no post, no beeps, nothing. Just a brief spark of light on the screen, no words, nothing. The machine gets occasional use, and there is nothing to indicate what could have caused the problem. I have not upgraded the BIOS recently, is not as if it was a bad BIOS update, or whatever it is. I tried to hit the F1, F2, F12 keys delete during startup. No results.

  The video works. I know because I can connect my laptop to the HDMI-in port and I can see the desktop of my laptop very well. So the question is NOT the video. My son uses this machine for occasional movies and homework in his room. I want to fix the computer, if I can. I am handy with computers and built several machines from the outset in the past.

  I believe that the most likely scenario is that the motherboard has went wrong; There are several posts around the internet about motherboards 2710 AIO being unreliable. I saw an ad on the forums of Dell from a guy who said Dell Tech Support replaced its motherboard 2710 five times. I see that some of these motherboards are selling on eBay for around $200. I'm toying with the idea of getting a. I watched the service manual for the 2710 and I'm pretty confident that I could replace the Board of Directors.

  Someone had experience with permutation on their motherboard on a 2710 AIO? Or someone has any ideas on what could be the problem with my son's computer? I appreciate all the advice/help anyone could offer.

  OK, I have removed all the RAM from the motherboard (there were two sticks) and unplug the connector on the SATA hard drive. Then I turned on the machine and got two beeps very strong, but still no video on the screen indicating any form of activity of the POST. The sound signals have been first sounds I've ever heard during the procedure of boot on this machine. I put the RAM back in and re-connected the SATA cable. The way he has been, no video, no post, no beeps. I'm a bit at a loss for what I've decided, this means that the motherboard works technically and that another device on the machine is at the origin of the problem? Have I reason to assume that if I hear two beeps, then I should have the certainty that the motherboard was bad? Given that this a sound signal, the solution becomes cloudy, I guess. I can't help but feel that somehow the BIOS on the computer is damaged. Don't quite know how that could happen, however, because I have not updated the BIOS in over a year. I don't remember what BIOS version I have, but he had been working well for a year with no problems. Thanks for any other help/suggestions you can provide.

• XPS 27 all-in-One

  Does anyone know or heard when they update the xps 27 all-in-one. The card look good accept for the card WiFi "n". I need fast internet access, but cannot get a wire to the computer. I was hoping that they would update the card a 'ac' a wireless. Does anyone know how it would be difficult to do after the fact. I want an all-in-one with screen touch to limit the son and clutter and easy to get from the road when I need my space on the desk for the plans. Maybe to stay with a conventional desktop computer but I meet a hell of a time finding a monitor touch screen.

  Do not know Dell plans to update the model XPS 27 AIO, but...

  What about disabling the internal wireless card in Device Manager, connect an ac USB WiFi dongle? Of course, this assumes that you have a router ca.

  Some USB dongles ac are discussed here.

  Just a thought...

• Dell Inspiron 3043 All in One-2nd monitor?

  My dell is not detect a 2nd monitor when I connect it to my Acer monitor.  I tried to use the VGA cable with a HDMI adapter.  I also tried to use a DVI cable to HDMI.  The Acer monitor only has VGA and DVI - D connections?  Is there another way to connect the 2nd monitor?

  I have the Dell Inspiron 3043 all in one

  You can consider using a USB2 > DVI - D or USB2 > adapter VGA to connect the second monitor, but they are not exactly cheap.

  And if you buy one of these adapters, make sure that the one you get can clone (1) internal display, (2) extend the desktop on 2 screens and (3) show 2 different screens simultaneously and is compatible with any version of Windows that you are using.

• j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

  j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR

• print allignment page all-in-one HP PSC 2400 turns off the printer features

  After changing the ink, trys to printer to run printerr allignment.  It feeds the paper to halfway through, then hangs up with all the flashing lights.  I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.

  After changing the ink, trys to printer to run printerr allignment.  It feeds the paper to halfway through, then hangs up with all the flashing lights.  I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.

  Hello

  You can get a faster solution on the Support Forums of HP printer.

  Here is a link for your convenience.

  Printers and all-in-one - HP Support Forum's:
  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

  Select the appropriate forum for your device.

  Concerning

• Windows 7, the printer Dell Photo All - in - one 922; Win7 says it has the most recent drivers, can see the printer, but tells me that the printer needs to "help out." interfacera not; updated drivers downloaded from Dell, but Win7 will not identify them.

  Well, it's a long story, but EDH to; I had problems with my printer works with Win XP. The same problem as now with Win 7.  I have e last driver of Dell, but Win7 says that drivers are up-to-date.  The printer appears in the Device Manager, but has the yellow triangle with (!) to score on this subject.  When I go to troubleshoot, it says it can't find the updated driver on the internet or the CPU.  Win7 says that the printer says that's not covering, check USB port, etc... I uninstalled the driver, let W7 update, and the printer still does not work.  What is the reference for this? Thank you... Corn

  http://support.Dell.com/support/downloads/index.aspx

  You get your Dell printer drivers; NOT through Windows Update.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Reference Dell 966 Photo all-in-One Printer owners thread (W7)

  Please follow the instructions below and then tell me what happens.

  First of all, let us make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

  I recommend that you use these settings to the recommended wireless router for better communications.

  Unplug your printer. Download and run this patch to completely remove the printer from your computer. Run the fix, a MUST on Vista machines, until it prompts you to restart your computer.

  If you use Windows 7 also try... Driver Manual printer removal

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  64-bit drivers

  All other drivers

  Install the appropriate drivers. You will be asked when connect you your printer (power on)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  If you use Windows 7, use the Vista drivers in compatibility mode.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Replace the Vista compatibility (try Vista SP2). Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

  Reformatting the hard drive and reinstall windows 7 has done the trick. This really delete all the driver files! With a clean machine, I was able to install the printer without problem in Vista SP2 compatibility mode. Not only so, but the other two Windows 7 PCs on my network domestic also saw the printer and installed it.

  It seems that the uninstall utility doesn't work unless you install the drivers correctly. If, as many of us have done, the drivers are installed without using the compatibility mode there are some files that get somewhere the uninstall program cannot reach. I just checked the section of drivers from the support page and can find no reference to installation in compatibility mode, the Council States that it is compatible and install the Vista driver. Always if Dell puts in place all the information, it should would probably be no need for forums like this.

  Just a pity that it took a format and reinstallation of the entire system to operate. Live and learn

  see you soon

• Reference Dell V 313 all-in-One Printer

  Recently, our 313 of V Dell all-in-One printer will print only an execution of an order given... the number of pages is irrelevant. Next time when I want to print, the printer icon small appears on the lower lip, the graph bar showing the beginning of printing appears, just at the top, and the printer sounds as if it starts to print, but only a couple of "grants", then a pause, then the printer stops, with the icon and the bar graph disappears from the display.

  The only way to get the printer to print the following command is to close all files, the printer and restart the computer. As soon as the computer has been restarted, and the printer turned on, without any other order, the printer starts printing the desired item.

  I uninstalled the drivers from Dell and downloaded the drivers from Dell official website of Dell, to see if this action makes a difference. I don't have.

  I'd appreciate deeply any suggestions on how I can adjust our PC to eliminate this mysterious hang up. Thank you.

  Porzel

  The system Dell printer is not compatible with Internet Explorer 11. Uninstall the present and go back to IE 10 and everything will be resolved. Is not ideal, but I hope that Dell of MS will come up with a better solution.

• HP all-in-one: I can connect a mouse not wireless to the computer

  I have a desktop all-in-one computer (HP Pavilion with Windows 8) wireless mouse and wireless keyboard. What happens if the mouse falls to the floor and breaks? Do I need a new mouse or can I connect a normal mouse with a USB port to the computer? Or if the computer works with a wireless mouse?

  You can plug a USB to your PC all-in-one mouse.

  You won't find the drivers, given that Windows 8 will provide the driver as soon as you plug in the mouse.

• HP all-in-one touch: while a touchscreen video card

  Can I put th video card because he did not have enough memeory to run the games I want to play?  Batman Arkum city says im running 1904 497 so that the screen stops and starts and shutters

  Hi there @willy68057,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand you are looking for what options you need to update a video card in your computer, all-in-one.

  Unfortunately, if you look in the HP Pavilion TouchSmart 20-f230 all-in-one desktop product specifications

  you will see that it is not an expansion slot that you can use for a graphics card. The video is integrated/combined with the processor.

  I hope that clarifies.

• HP Photosmart C6280 all-in-One: I can't cancel an installation HP

  My all-in-one software has already been installed successfully years ago. My husband did not know that he had to go through the "devices and printers" in the "Start" menu to access the analysis feature, so he assumed that scanning capabilities were not working. He tried to install the software from the internet, and it gave an error. Now, I can not completely cancel the installation process. I get pop HP ups "of Installer HP request your permission...". "If I let the permission, he brings me through the whole process again just to give me the same error. If I cancel the authorization, he just keeps popping up. How completely cancel the installation attempt?

  It seems that the installation is trying to update the old version to the new version but is a failure.  I suggest that you restart the computer, then uninstall the driver, old and new.

  Of course by then, you can reinstall the printer as you did before, or by getting the software from our site directly:

  http://support.HP.com/us-en/product/HP-Photosmart-C6200-all-in-one-printer-series/3194493/model/3194497/drivers

  Let me know if unistalling corrects or does not solve the underlying problem and we can look further.

• How to get the Dell 944 Photo all-in-one printer driver to work

  I just bought the Inspiron 580 and am trying to use my existing printer (Dell Photo All in One 944) how to download correct driver for the printer to work with the new computer?

  S Pipkens,

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (utility cleaning printer) untip it prompts you to restart your computer.

  Restart your computer. Make sure that the printer has been deleted. Driver Manual printer removal

  Download and install the proper drivers from...

  Reference Dell 944 all-in-One Printer owners thread (W7) (Patch is also located here)

  Firewalls and anti-virus programs will block communications.

  Rick

• HP Officejet J4540 All In One: Why can't check my ink levels on my officejet J4540 with windows 8.1 installed on my computer

  I want to check on my printer ink levels, but there is no way I can see to do since I installed

  Windows 8.1 on my computer. There must be another way to check it out, but I can't figure out how.

  Hi @sneakers1491,

  Welcome to the HP Forums!

  I see you're wondering how to check the ink with your HP Officejet J4540 levels. I'm happy to help you!

  First of all, I recommend going through this guide, check the ink levels for HP Officejet J4500 and J4600 all-in-One Printer Series.

  If this does not work for you, on the printer itself, press the key icon in the upper right corner, it will take you to settings, then continue to press the right arrow until you see print report, then press OK. You will see the self-test on the screen, press OK again. Will display the test page, and then you will see the level of ink on the printed page.

  I hope this information helps!