Display reader Eror.

Similar Questions

• display reads door open - all doors are closed

  I have an officejet pro 8500

  display random reads door open

  copies start then cancel

  Troubleshooting page here can help solve the problem.

• How to get the "Sign" option to display; Reader XI on Win 7

  Lately I am unable to get the option "Sign" to view the XI player.

  Reader XI, Win 7.

  I found this statement but could not do this job:

  If the icon of the sign is not in the toolbar, right-click the toolbar, and then choose file > Add text or Signature.

  I have a right-click just to the left of the "Tools" command, but the file > showed an option to "Add Signature text.  What is displayed for file > 'Documents', 'convert', 'create a PDF file", etc.  Not sure I'm in the right place.

  The document being interest is one that I scanned.  I checked the properties of the Document, and it says "filling of form fields: permit."

  This feature of 'Sign' existed before, and I don't know what has changed.

  Help.

  Frank

  Hi Frank,.

  Have you tried with different PDF files?

  Other than that, the only thing I can think of is to reinstall the drive.

  Kind regards

  Rave

• Simulation read data file (*.) (DAT) by using the worksheet (file reading eror - zeros)

  Dear OR community,

  IM pretty new in LabVIEW, so I have a few broblems with reading the data.

  I take a screenshot and mark a problem like part - A and part b below:

  

  The description of the goal:

  I do a mathematical simulation, using the old software whitch exporting results as shown in 1... DAT file, as it shown in the picture (Notepad).

  First of all I need not read these data then I need to draw the graph XY.

  Description of the problem:

  I created a LabVIEW program and im using a funciont reading of spreadsheet per section B - but when im trying to read data im getting all zeros...

  so I can't identify my problem... What is the problem?

  I try different file to read its Case_test_working.txt and everything is good with this data but when im trying to read *. DAT file zeros is array...

  I tried to use seperator different symbols, also try to imort data to exel then export to *.scv, *.txt formats, but the performance was the same as that indicated in part-A.

  Whenever I get zeros, but not a results as in *. DAT or another file format exported with the same data.

  Please be respectifull and understand that im still newbie in labview but I think its excellent software of filtering of the analysis of data and calculations, so I want to master this software for my future use.

  Respectfully,.
  Tomas E

  
  

• Asus eee pc 701sd starts display reads select boot device. Help me?

  the only option listed for bootable devices listed is HARD disk; SM-ASUS-PHISON SSD. IAPPUYEZ ENTER, AND NOTHING IS GETTING PAST. PLEASE HELP THANK YOUI

  Hi theodoresochor,

  Looks like the boot of the computer device is not set correctly, or basic input/output system (BIOS) does not save the changes made to the boot device.

  I suggest that you contact the Asus support for changes in the basic input/output system (BIOS).

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

• Photosmart 7520e-all-in-one: Bran new 7520 Photosmart e-all-in one display reads "cartride seems to be missing.

  The cartridge of aziz I received, new in the box with your printer, appears on the screen as 'missing '.  I spent this cartridge with others supplied with the printer.  Each location, I placed this same cartridge Aziz, the missing bed printer screen.  The other cartridges play very well in the slot of aziz.  I restarted the printer, nothing helps.  I can't go past this screen of configuration to use the printer.

  Hello! Welcome to the forums @67huey

  I understand your new Photosmart 7520 does not recognize the cyan cartridge, and I want to clarify my suggestions for you!

  I recommend you first try troubleshooting steps to see if you can get the printer to see the cartridge.

  Click here to see the steps: ink cartridge problem: a 'ink cartridge problem,' "Not compatible ink cartridge" or "Ink cartridge failed" message on the Photosmart HP printer control panel 7510 e-all-in-one and HP Photosmart e-all-in-one 7520, Printer series

  If the printer still does not recognize the cyan cartridge, please call us directly you may need a replacement of the cartridge.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Good luck to you, thanks for posting in the community

  

• Need to view daq reads per second but only to record a reading every 10 minutes. I would also like to record the date and time, at the same pace. Need help

  Need to show daq reads per second, but only to record a reading every 10 minutes, need help

  You are also looking to taste to 1 Hz data acquisition?

  My approach would be to use the DAQ acquisition to time your loop display reading each acquisition, then use the loop counter to control the logic of your writing to file.  For 1 Hz and 10 minutes write I would use 'quotient and remainder' I / 600; If rest = 0, then write the data point.

  For the date and time, under Calendar palette use the time get in seconds food a DateTime Format to a string.

• Basket full, but no files are displayed

  When I delete files, my recycle bin icon changes from empty to full, but when I click on the trash, it opens an empty window, as if there is no files inside.

  When I click on "empty trash" it displays a confirmation request asking "Are you sure you want to delete these 16 items."  So it seems that the elements are there, just that for some reason that I do not see the list of them.  I tried to change the preferences for the bin recycling show all files, but that did not help, the total number of files still display reads as 0.

  If I have the bin opens when I delete something, I can see it now, but as soon as I update, I just deleted that disappears from the screen, although it is still in the trash until I click to empty.

  I have already been through the forums and tried these solutions:
  http://www.Winhelponline.com/blog/how-to-fix-a-corrupted-Recycle-Bin-in-Windows-Vista/
  http://www.Winhelponline.com/articles/252/1/Recycle-Bin-icon-does-not-refresh-automatically.html
  ... but none solved the problem.

  Any help is greatly appreciated!

  Hi Ian

  Many suggested in the last two months. :)

  Back when it was suggested to do the clean boot and you have determined that the trash has worked properly in clean boot mode, you were able to check what Service or startup program has been the origin of the problem by disabling Services and/or startup programs in MSCONFIG?

  I think it's been reduced to another Service or startup program is causing this problem.  You said that you have created two new users have the issue as well.  At this point, my recommendation is:

  1. live with the problem you mentioned that you prefer to do.
  2 use MSconfig to check what Service or startup program is causing the problem.
  3 backs up your data and use the recovery DVD and turn your computer to produce specifications.

  Thank you for viewing on Microsoft Answers.
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No boot, the file is possibly corrupt

  Please I need help. I turned off my laptop and went to turn it back on it would nt start.
  I'm a technophob.

  The message displayed reads "the file is maybe damaged. The file header checksum does not match the checksum calculated.

  Please help I need it thanks in advance

  James

  I think that you have to reinstall Windows. Use image disks or the hard drive recovery. If you Donetta have a recovery disc, you can order:

  https://backupmedia.Toshiba.EU/landing.aspx

  or install Windows copy disk with drivers Toshiba.

• Failure 0 x 61000031 for HP Deskjet 3520 printer?

  I'll put up my HP Deskject 3520 for the first time. Configuration information that I indicate that I am supposed to connect the HP printer, install the print cartridges and then turn it on. The printer display reads "printer failure 0 x 61000031 ' there is a problem with the printer or ink system. Turn the printer off, then on. If you continue to receive this message, contact HP.

  I tried to turn the printer off and turning back on it (both connected to the computer with a USB cable and not). I always get the error message. The printer gives me even the screen to try a print test, calibrate, cartridges etc. When I try to lift the lid to check the cartridges, the printer indicates that the ink cartridge door is open, but it does not move the cartridges where I can take a peak at them. I just bought this printer today. Am I right in thinking that I should just take it back to the store and exchange for a new one?

  Given that the error occurs regardless of whether the USB cable is connected to my computer and that I myself never even at the stage where I could wireless configuration, I kind of doubt that it is important what operating system I use. However, if it's important, I use 64-bit Windows 7 Home Premium with Service Pack 1.

  Hi polkadotorchid,

  The error is caused by the mechanism of cartridge which is stuck to its original position.

  Is it possible to manually move this mech postiion home cartridge toward the center of your printer?

  If you are unable to move freely, you will need to call our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• front end control hovercraft

  Dear all,

  I am doing the project for my final year on Panel engineering front hovercraft using labview. Here, I have attached my vi. Please someone go through it.

  I get a series entry and display temperature display thermometer. Problem is as soon as the series executed and displayed reading the temperature on the thermometer the thermometer displplay display goes back to 0, reading, it will not always see the result.

  suggestions needed,

  I need to set up the sensor right, left and right, which is the Ultrasonic sensors which is the present enemy near the sensor and I need dispalay the distance between the sensor and the enemy who also came from Sanchez helps labview.how to implent it.

  Please someone help me to do this work.

  Thank you and best regards,

  Sudarshan

  LabVIEW, the default 'resets' orders or the default value (zero) indicator.

  The reason why you have to put your code inside a loop is very intuitive and a knowledge of the "common sense". You must specify the computer to keep your program execution for a specified period or until you force quit. If you don't do this, your machine runs each statement once and then, period. Imagine a plane that runs a control post (the brain) code within a material, without a loop. It will run once (for a period of a few microseconds) and then your aircraft will have no brain to decide what to do. So it will crash. Millions of lives will be lost.

  The loops are necessary 'energy' to keep your active code for a while. Your code will run once, and after it is finished running, its controls and indicators back to their State natural quantity ZERO.

  Maybe it's one of the reasons for your problem. Try putting a WHILE LOOP with a FALSE Boolean constant hung with terminal condition. Or simply wire a Boolean control the State OFF. If there still is no temperature reading, or get the reading as you mentioned, then there must be a problem with the acquisition hardware that you are using to measure the temperature.

  Try to put the loop first, observe and come back here.

  An other logistics major, that you need to take care is the SUBJECT LINE. Do not mention the title of the project in which you are facing problems. You are the door problem on only a part of your overall design. Try to get to issue brief, to-the-point. For example I have a robot (General design) where I get no ultrasonic sensor data (a design offer) because Calendar and the sycnhronization is a little new to me in LabVIEW FPGA (under part of part of overall design). So my subject line would be Timing and Synchronzation ultrasonic sensor in LabVIEW FPGA.

  Kind regards

• HP CP400DN: CP4005dn

  He is a recent problem insofar as my printer worked OK until about 3 weeks ago.

  When trying to print multiple pages, him buzzing printer in action prints one page front and then stops with the display reading "Clearing paper path" followed by "check printer" and finally "41.5 unexpected in tray 2 Type.

  I did the latest available driver and firmware installed. The paper is A4 90GM and I put the type of printer for various types i.e. AllType, plain and intermediary 90 grams, unfortunately without success.

  Hello

  What happens when you try to Tray 1?

  Two things to try:

  1. Try configuring tray 2 paper type "Bond" and try to print again.
  2. Clean the media sensor that is in the book of power Cpl just before the roller ETB/Mar.  The guide holding the media sensor can be rotated to reveal the sensor glass which can be covered with paper dust and toner.  If you need a photo, let me know and I can give you a.

  I hope this helps.

  DaveK.

• Re: Converts a hexadecimal string to a number

  Good afternoon;

  I'm doing the same thing.  I read 8 bytes of data from a modbus gateway.

  I take the substring that I'm interested in... if I put normal playback display is not printable... the value hexadecimal display reading is 3098 should be decimal 12440 I think?

  It feels like I am close but not quite...

  MNED wrote:

  I can't get the conversion...

  Have you tried our suggestions (font Type) or string Unflatten yet?

  

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• She didn't twist peaks in Movie Maker

  I have windows Movie Maker 5.1...
  When I upload a photo she returned it 90 degrees and I can't find a button to make it turn.  Is it because it's an older version?
  What can I do?

  Drag the photo/s to the script/Storyboard and go...
  Video effects and drag and drop an effect of rotation on the photo.

  See the results in the display (reading).