Distorted screen Moniter.

Similar Questions

• Distorted screen of the console using Ubuntu Linux on Satellite C70-B-212

  Hi all

  I have a problem with Linux on my laptop Satellite C70-B-212. The videochip Intel Graphics 4400 is supported by Linux, but on this laptop, it gives very distorted output on the console screen. I see a few vertical lines on the screen showing a few ghosts strange images of the output.

  The Office of exit itself seems to stop smoking well, until I have a screen and move it to the bottom of the screen. You can see the top of the screen some distortion in the upper line.

  In Windows everything works fine. When I use the parameter 'nomodeset' turns off the kernel mode setting these lines do not appear. But then, I expect that 3D hardware acceleration is disabled too.

  I suspect that this is a timing issue with the screen of the computer. Just a very minor lag on the clocks or sync.
  It could be just my laptop and then it just cloud be replaced or maybe it has to do with the series.
  Anyone seeing the same issue on this model or series.

  Having Linux on C70-B-212.
  Who can verify this by starting Linux liveCD on laptop C70-B-212.

  Thank you

  Marco

  Hi Marco

  It sounds like a driver problem => kernel.

  You can try a kernel later maybe?
  Do you know that you are using atm?

  in terminal type:

  uname - r

  Course Fedora uses 3.16 nuclei which is a very recent (if not the most recent) output.

  Some Ubuntu distro oriented have test of nuclei in the repositories, you will have to add it manually.
  Maybe it's worth a try?

  Tom BR

• distorted screen appearance

  my screen is distorted. my wallpaper and windows appear laying on my monitor. not sure what I did, but how to restore the appearance?

  Hello

  2-way, you can try to solve this problem:

  1. try to go to your website in manufacturere graphics or computer cards and find the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  THEN try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  For example, 640 × 480 is a lower screen resolution, and 1600 × 1200 is higher. CRT monitors generally display a resolution of 800 × 600 or 1024 × 768. LCD monitors can better support the higher resolutions. If you can increase your screen resolution depends on the size and capability of your monitor and the type of video card you have.

  Text and images are sharper and smaller at high screen resolutions
  Text is larger and easier to read at low screen resolutions, but images are rasterized and number of items adapted to the screen

  1. Open display settings by clicking on the button start , by clicking on Control Panel, appearance and personalization, clickingPersonalization and then clicking display settings.

  2. Under resolution, move the slider to the desired resolution, then clickApply.

  

  Notes

  • When you change the screen resolution, it affects all users who log on the computer.

  • When you set your monitor to a screen resolution that it will not support, the screen will go black for a few seconds while the monitor returns to the original resolution

  2 try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Close unexpectedly at the stop and restart shows distorted screen

  original title: unexpected display change

  (a) when I turned off my computer, he threw upwards from the login screen "close unexpectedly.

  b I me am saved in safe mode on and off again

  (c) when I rebooted the display had gone special - fonts had changed, and the taskbar are white instead of gray

  (d) there is no way to change the display

  (e) the computer seems to work normally otherwise

  Any ideas?  I can't find anything anywhere that helps.

  Windows Vista Home Basic on Dell Inspiron

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and/or:

  try to go to your computer manufacturer website and look for the driver download section

  Find your computer model number and download and install the latest graphics drivers for vista

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

• Unable to start - start the computer to a distorted screen

  original title: unknown problem with repair/recovery, tiles strange system startup screen? Help!

  Lately, my computer acted up (Dell XPS 410 w / Vista Home Premium so this is important) and when I start the computer and access the boot screen, I get what looks like this (see 3rd photo link). Usually the Startup Repair resolved the problem for a short period of time. This morning I tried it again, when he said he failed and received an error message (see photo 2 links first). Note: I could not can not send in an error report because the computer that it is is not connected to the internet.

  http://farm5.static.Flickr.com/4086/4831582309_8b3d5d28da.jpg

  http://farm5.static.Flickr.com/4149/4831583773_05eda7b568.jpg

  http://farm5.static.Flickr.com/4108/4832195518_f37d4d5fd9.jpg

  Does anyone have a solution? Thanks advance.

  Gentlemen thank you very much for the replies so far.

  I tried to do the Startup Repair once more and I went into the details of it, and he said that the cause was recognized as "a recent driver installation or upgrade may prevent the system from starting". That is rather confusing, because I don't have NO idea what driver it might be.

  At this moment I am boot from the Vista disc supplied. I hope I can find a solution that is one of the many that you guys have provided so far.

  EDIT: She apparently did not work...

  You can normally make repairs since the Dell recovery disks.

  Read this and if necessary, do you do a startup repair disk:

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Distorted screen of Windows 7 remote desktop printing

  In our work environment, we are running Win7 Pro on workstations with monitors 24 ", and we are mode connection full screen on Windows 2003 Terminal Server that has a monitor standard aspect ratio of 4:1.  We use specific software in the industry for our company, and when we print, the text is elongated.  If the screen resolution for the Terminal Server Session on the client is configured for 1024 x 768 instead of 1900 x 1200, it prints very well as shown here:

  

  Unfortunately, the way things are presented to the user on the screen at 1024 x 768 is not satisfactory.

  We have a few (all 1900 x 1200 widescreen) customers who use software in the industry outside the Terminal Server environment, and they print without problem.  This leads me to believe that there is a specific problem in Win7 remote desktop client, or the Terminal Server itself.  Whatever it is, the display resolution selected for the Terminal Session is clearly the culprit.  In software, the print is first presented in a preview before printing, and the lengthening of the police is visible in the preview screen. I think that the software is written in C++, but I'm not 100% sure on that.  I'm guessing this has something to do with the print job will be returned on a big screen, but I'm not advanced enough to find out how or why that matters in the grand scheme of things.

  I have installed the patch in KB2768741 to Win7 clients, but he did nothing to help the issue.

  Ideas?

  Hello Jay,

  According to the information provided, I see that you are working on a domain network environment. If Yes, then I would advice, you follow the link mentioned below to validate your request in the TechNet forums because they have more expertise on these issues.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

  Thank you

• all distorted screen colors

  The default background is turned on and then could not display all images without multi color pixel showing instead of images.  Anyone have any ideas?

  Hello

  Either:

  (a) the monitor is shot

  (b) the video card is turned or

  (c) your display card drivers are corrupted.

  First download and install a new set of drivers from the manufacturer of the display card. You can also try the demagnetization of the monitor (follow the manufacturer instructions). If these steps fail to resolve the problem, then see if you can find or borrow a spare monitor and connect it instead of yours. If the problem persists, try then the problem is (b). If not, then it is (a). You need to replace the indicated component. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Reduce the size of the Moniter screen

  original title: screen Moniter

  The size of the screen on my moniter is so great, that the task and the toolbar disappear. How can I fix?

  Sonia,

  Check that the graphics drivers are loaded correctly or not.
  For verification,
  Access the System Properties, hardware tab, select device, Manager select display adapter right click over there and check the status of the device if works properly or not.
  If load, please try to change the resolution of your screen.
  To change the resolution,
  Click right in the free space on the desktop, go to the tab change settings of the resolution option & apply settings.
  Kind regards
  Chauvet J.

• Satellite SP6000 - Crash with bands of color on the screen

  Hello!

  I have a Satellite Pro 6000 and it has worked well for more than two years. But in the last two months the laptop crashed at any time with a screen televisions flicker with stripes of color. After that, it takes time to make it work again. XP Pro is fresh installed since the recovery CD. Unfortunately, it looks like a hardware problem. An external monitor displays the same distorted screen. I don't think it's too hot and the fan is running and blowing hot air.
  It is out of warranty now and I don't want to spend a lot of money on a repair task.
  So, any suggestions for me? I don't mind opening and replacement/repair of certain parts of it, but it would be great for advice on a possible reason for this.

  Thank you in advance and bye,

  superberti

  Hello

  Of course, it could be a malfunction of the motherboard connector or the power.
  But to be 100% sure that you should contact ASP, because he can do a diagnostic test, and then it can give you an exactly the answer on the fault.

• Screen guard randomly goes black for a few seconds

  At random times, but especially when I'm using outlook or to access the internet (not always), my screen will go black for a few seconds, then back on, but with the slightly distorted screen. I have connected a new monitor to the computer to see if it was a problem with the monitor, but it always does with the new screen, so I know it's the PC itself. How can I fix it?

  Hello

  What is the number and model of your computer and your monitor?

  Method 1:

  Step 1: check the issue in safe mode:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Step 2:

  Perform the clean boot and check:

   

  http://support.Microsoft.com/kb/310353

  Method 2:

  Try to uninstall and reinstall the graphics driver and check.

  a. right click on my computer, then select Properties

  b. on the Hardware tab, find the button to open the Device Manager

  c. your graphics card must be included under the heading of the graphics card.

  d. double-click the name of your graphics card to open a window of properties of your current card.

  e. tab driver, click Uninstall.

  f. restart the computer and the graphics driver will be automatically installed.

  Hope the above information is helpful.

• BlackBerry Smartphones from blackBerry 9700 reboot screen stuck and deformed

  I rebooted my blackberry 9700, but it is stuck on restart screen where it says blackberry with unfinished start line and a distorted screen

  Hey scramba,

  Welcome to the community of BlackBerry Support Forums.

  Have you tried to remove the battery? If so, I would say to do a reload own the software of the device as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320, please test before you restore all data on the device.

  I hope this helps!

• Camera correct distortion is no longer working

  II worked without a problem by using the correct camera distortion filter try different settings. Now when I go to the screen of the CCD, the only option I have is aid and cancel. I can't click Ok. I have to force quit my Mac to exit the screen. I tried to shut down and restart the computer, but it does not help. I tried to reset the Tools button because I did a crop.  Not sure that the tools are reset. Any ideas on what is happening with the Correct camera distortion screen?

  You must move one of the sliders. Then, you can click OK.

• Video playback by USB 58M9363D issues 4 k TV

  Hello

  I recently purchased the k 4 58M9363D and I love so far. However I have serious problems with the video game since the two USB and through my pc. They ruin the experience at the moment and if all goes well, they can be fixed. So here goes!

  Whenever I try to play a file mp4 by USB, it says format is not supported, it's especially painful when all 4 k I could find content seems to be in mp4 format.

  Another question I get is with playback of usb 3D movies.
  Sometimes they play perfectly well but often I get strange long lines at the bottom of the screen, making is very bad.

  It doesn't seem to be a problem of format I tried for most of mkv files that half of working time and the other half I get the same distorted screen.

  Finally, I can't read my pc 3D movies.
  When I turn on a video VHS and press the 3d button on the remote control, I just get a double SBS screen that looks like converted from 2D to 3D, rather than merge them into a single real 3D image.

  Can someone tell me how to solve these problems?

  Thanks in advance!

  Hello

  Regarding USB playback:
  Toshiba M8365 Manual of use (page 94/95), you can find the details about the format of media taken in charge, file extension, video codec, etc.
  http://www.Toshiba-OM.NET/LCD/PDF/English/M8365-405058-English.PDF

  The MP4 media format is certainly supported.
  The following video codecs in mp4 file format must be used: H.264 (MPEG-4 AVC), MPEG-4 part12 14

  With regard to the support of 3D (over HDMI):
  Take a look at page 96. You will find information on the resolution 3D supported, the aspect ratio and structure 3D (Side by Side (half), side by side (full), up and down)
  Possible 3D structure depends on the resolution of the film.

• My computer has lost the ability to go in mode "Eve".

  From a windows update last Saturday, my computer has no opportunity to use mode 'sleep'.  It's just one of the many changes that have occurred since the update: display is distorted, screen saver does not work as it did previously, sleeping capacity mode disappeared, etc..  I am very frustrated.  I have nothing but turn off my computer to allow updates to day, then when I turned it back on, everything was different.  I tried to set each of these things, but have had no luck.  Any suggestions?

  As updates to create a restore point when they install suggest that you use the system restore to roll the system using that point restaurant named Windows Update from Saturday - System Restore: frequently asked questions MowGreen Expert from Windows IT Pro - consumer safety

• Clipboard in Windows 8?

  I started with 'Basic' in the 1980s, graduated for DOS, windows 3, then 95, 98, ME. I use xp, sp3 now because I think that more than a decade, I've never had problems with xp, that cannot be easily solved. My father had a computer dell laptop with xp, sp2 to subject the same decade, but he remained in Southeast Asia after vietnam and bought the computer in Indonesia. He returned to the United States about a year, I gave the machine a depth exceeding, but most of the mechanical parts is worn. with cooling fan, engine cd, hard drive. He finally got sick of it because it was so loud, so we went last September and bought a new HP with windows 8. What happened?. SOMEONE REALLY TRYING TO USE THIS SYSTEM? I studied the EULA... it seems that $650 buys only really plastic case, everything inside belongs to microsoft, Hp, cisco, adobe, Sun, all third parties who want to lay claim to it. Therefore, the USER HOSTILE. I tried for months to make sure could use an 86 year old man and came to the conclusion that its an EPIC fail. I opened his dinosaur was able to connect a fan designed for a computer laptop desk, but I use the ALL NEW WINDOWS 8 for THE TRANSFORMER, bad power supply and other issues will soon be frying the good "laptop with no bottom cover, distorted screen, no sound and shock casual, if you try to lift without him be correctly positioned on the machine for 8 failure of WINDOWS.» In any case what I'm trying to ask is what are my options now, my office xp3 works like a charm, i ' v everything improved several times now, I built it primarily for games, but I use it for everything, IM GETTING TOO OLD to MESS WITH ALL THIS 'SMOKE AND MIRRORS' WINDOWS 8 *... Will there be a third party to provide support for XP. or I'm screwed? I refuse to buy a new computer, unless I get a user-friendly operating system more, and I've been out of the loop for during more than 10 years now (because xp is still the best ever offered microsoft). I'm too old for computers or anyone else notice how poor this windows 8? HELP PLEASE IS THERE IS AN ALTERNATIVE TO 8 I WOULD LIKE TO KNOW. i ' v tried programs "shell", but they always come down to "enter a password for a program that has never accepted of" just to turn on the damn thing.

  Updates for Windows XP can be installed only if service pack 3 is installed first.

  XP will not stop working, updates and anti-malware for XP stops.

  Third party anti-malware program must be installed before the end of support.

  If you have data on any XP machine, it would be safer to back up to an external drive or

  another computer.

  I have just been called away from my pc, will later today.